Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 30-05-2025 | Corrigendum_IV | Technical Bid | 02-06-2025 |
| 2 | 29-05-2025 | Corrigendum_III | Date | 02-06-2025 |
| 3 | 27-05-2025 | Corrigendum_II | Technical Bid | 29-05-2025 |
| 4 | 23-05-2025 | Corrigendum - I | Technical Bid | 29-05-2025 |
| Sl. No. | Item Description |
| 1 | Civil work |
| 2 | Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth up to 30 cm measured at a height of 1 m above ground level and removal of rubbish up to a distance of 50 m outside the periphery of the area cleared. |
| 3 | Earth work in excavation by mechanical means (Hydraulic excavator) / manual means in foundation trenches or drains (not exceeding 1.5 m in width or 10 sqm on plan), including dressing of sides and ramming of bottoms, lift upto 1.5 m, including getting out the excavated soil and disposal of surplus excavated soil as directed, within a lead of 50 m. All kinds of soil |
| 4 | Earth work in excavation by mechanical means (Hydraulic excavator)/ manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth lead upto 50 m and lift upto 1.5 m, as directed by Engineer- incharge. All kinds of soil |
| 5 | Extra for every additional lift of 1.5 m or part thereof in excavation / banking excavated or stacked materials. |
| 6 | Banking excavated earth in layers not exceeding 20 cm in depth, breaking clods, watering, rolling each layer with ½ tonne roller, or wooden or steel rammers, and rolling every 3rd and top-most layer with power roller of minimum 8 tonnes and dressing up, in embankments for roads, flood banks, marginal banks, and guide banks etc., lead upto 50 m and lift upto 1.5 m : All kinds of soil |
| 7 | Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20cm in depth, consolidating each deposited layer by ramming and watering, lead up to 50 m and lift upto 1.5 m. |
| 8 | Excavating, supplying and filling of local earth (including royalty) by mechanical transport upto a lead of 5km also including ramming and watering of the earth in layers not exceeding 20 cm in trenches, plinth, sides of foundation etc. complete. |
| 9 | Supplying and filling in plinth with sand under floors, including watering, ramming, consolidating and dressing complete. |
| 10 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:3:6 (1 Cement : 3 coarse sand (zone-III) derived from natural sources : 6 graded stone aggregate 20 mm nominal size derived from natural sources) |
| 11 | Providing and laying in position cement concrete of specified grade excluding the cost of centering and shuttering - All work up to plinth level : 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources) |
| 12 | Providing and laying in position ready mixed or site batcheddesign mix cement concrete for reinforced cement concrete work;using coarse aggregate and fine aggregate derived from natural sources, Portland Pozzolana / Ordinary Portland /Portland Slag cement, admixtures in recommended proportions as per IS: 9103 to accelerate / retard setting of concrete, to improve durability and workability without impairing strength; including pumping of concrete to site of laying, curing, carriage for all leads; but excluding the cost of centering, shuttering, finishing and reinforcement as per direction of the engineer-in-charge; for the following grades of concrete.Note: Extra cement up to 10% of the minimum specified cement content in design mix shall be payable separately. In case the cement content in design mix is more than 1.10 times of the specified minimum cement content, the contractor shall have discretion to either re-design the mix or bear the cost of extra cement. a) Concrete of M25 grade with minimum cement content of 330 kg /cum: All works upto plinth level |
| 13 | b) Concrete of M25 grade with minimum cement content of 330 kg /cum: All works above plinth level upto floor V level |
| 14 | c) Concrete of M30 grade with minimum cement content of 350 kg /cum: All works upto plinth level |
| 15 | d) Concrete of M30 grade with minimum cement content of 350 kg /cum: All works above plinth level upto floor V level |
| 16 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete upto plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 17 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level. Thermo-Mechanically Treated bars of grade Fe-500D or more |
| 18 | Centering and shuttering including strutting, propping etc. and removal of form for : Foundations, footings, bases of columns, etc. for mass concrete |
| 19 | Centering and shuttering including strutting, propping etc. and removal of form for : Lintels, beams, plinth beams, girders, bressumers and cantilevers |
| 20 | Centering and shuttering including strutting, propping etc. and removal of form for : Columns, Pillars, Piers, Abutments, Posts and Struts |
| 21 | Centering and shuttering including strutting, propping etc. and removal of form for : Stairs, (excluding landings) except spiral-staircases |
| 22 | Centering and shuttering including strutting, propping etc. and removal of form for : Suspended floors, roofs, landings, balconies and access platform |
| 23 | Brick work with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundation and plinth in: Cement mortar 1:6 (1 cement : 6 coarse sand) |
| 24 | Providing and laying autoclaved aerated cement blocks masonry with 150mm/ 230mm/ 300 mm thick AAC blocks in super structure above plinth level up to floor V level with RCC band at sill level and lintel level with approved block laying polymer modified adhesive mortar all complete as per direction of Engineer-in-Charge. (The payment of RCC band and reinforcement shall be made for seperately). |
| 25 | CEMENT PLASTER (IN COARSE SAND): Providing and laying plaster : 15 mm cement plaster on rough side of single or half brick wall of mix :1:4 (1 cement: 4 coarse sand) |
| 26 | CEMENT PLASTER WITH A FLOATING COAT OF NEAT CEMENT: 15 mm cement plaster on rough side of single or half brick wall finished with a floating coat of neat cement of mix : 1:4 (1 cement: 4 fine sand) |
| 27 | 18 mm cement plaster in two coats under layer 12 mm thick cement plaster 1:5 (1 cement : 5 coarse sand) and a top layer 6 mm thick cement plaster 1:3 (1 cement : 3 coarse sand) finished rough with sponge. |
| 28 | Extra for providing and mixing water proofing material in cement per bag of plaster work in proportion recommended by the manufacturers. |
| 29 | Interior Paint : Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats |
| 30 | Wall Primer: Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound ) content. With water thinnable cement primer on wall surface having VOC content less than 50 grams/litre |
| 31 | Putty: Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. |
| 32 | Exterior Paint: Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) |
| 33 | Exterior Texture Paint (Apex Ultima Allura Torino of Asian Paint code - PRODUCT CODE 5417): Providing and applyingStone finish Exterior Texture Paint in 2 coats paint + 1 coat primer with approved brand & manufacture to give an even and smooth shade of color of approved shade after thoroughly cleaning the walls by water and brushing to remove all dirt and remains of loose materials, up to all level above plinth complete, scaffolding to any height, curing etc complete. Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift, performance waranty certificate etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. |
| 34 | Supplying, diluting & Injecting chemical emulsion for Pre constructional Anti Termite Treatment With Chlorpyriphos/Lindane E.C. 20% with 1% concentration in 3 stages creating a continuous chemical barrier all-round the building including diluting in water as per manufacturer\"s specification conforming to IS 6313: 1981 in under & all around raft slab, beam, footings, column pits, trenches, wall trenches, backfill, plinth filling, junction of wall and floor, external perimeter of building, surrounding of pipes, over the top surface of the consolidated earth etc. for all lead and lift.. The treatment shall be carried out by specialized agency specified by the Client/ Consultant. Plinth area at ground level excluding open courts shall be measured. Treatment of soil under floors using chemical emulsion @ one litre per hole, 300 mm apart including drilling 12 mm diameter holes and plugging with cement mortar 1 :2 (1 cement : 2 Coarse sand) to match the existing floor: With Chlorpyriphos E.C. 20% with 1% concentration |
| 35 | Providing and laying water proofing treatment in sunken portion of WCs, bathroom etc., by applying cement slurry mixed with water proofing cement compound consisting of applying :(a) First layer of slurry of cement @ 0.488 kg/sqm mixed with water proofing cement compound @ 0.253 kg/ sqm. This layer will be allowed to air cure for 4 hours.(b) Second layer of slurry of cement @ 0.242 kg/sqm mixed with water proofing cement compound @ 0.126 kg/sqm. This layer will be allowed to air cure for 4 hours followed with water curing for 48 hours.The rate includes preparation of surface, treatment and sealing of all joints, corners, junctions of pipes and masonry with polymer mixed slurry. |
| 36 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish, Size of Tile 600 x 600 mm |
| 37 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish, Size of Tile 600 x 1200 mm |
| 38 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm (skirting & riser) |
| 39 | Providing and laying Vitrified tiles in floor in different sizes (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622, of approved brand & manufacturer, in all colours and shade, laid on 20 mm thick cement mortar 1:4 (1 cement: 4 coarse sand) jointing with grey cement slurry @3.3 kg/sqm including grouting the joints with white cement and matching pigments etc. The tiles must be cut with the zero chipping diamond cutter only. Laying of tiles will be done with the notch trowel, plier, wedge, clips of required thickness, leveling system and rubber mallet for placing the tiles gently and easily. Glazed Vitrified tiles Matt/Antiskid finish, Size of Tile 600 x 600 mm (Toilet area flooring) |
| 40 | Providing and laying Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % and conforming to I.S. 15622, of approved make, in all colours & shade, in dedo, over 12 mm thick bed of cement mortar 1:3 (1 cement: 3 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joint with white cement & matching pigments etc. complete. Size of Tile 600x600 mm (Toilet area dedo and skirting) |
| 41 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 600x600 mm |
| 42 | Grouting the joints of flooring tiles having joints of 3 mm width, using epoxy grout mix of 0.70 kg of organic coated filler of desired shade (0.10 kg of hardener and 0.20 kg of resin per kg), including filling / grouting and finishing complete as per direction of Engineer-in-charge. Size of Tile 800x800 mm |
| 43 | Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cementmortar 1 : 4 (1 cement : 4 coarse sand) : 25 mm thick |
| 44 | Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. |
| 45 | Extra for pre finished nosing in treads of steps of Kota stone/ sand stone slab. |
| 46 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for window sills, door frame and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red. Area of slab over 0.50 sqm (Door Frame) |
| 47 | Providing and fixing 18 mm thick gang saw cut, mirror polished, premoulded and prepolished, machine cut for window sills, door frame and similar locations of required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels. Granite stone slab colour black, Cherry/Ruby red. Area of slab upto 0.50 sqm (Window sill) |
| 48 | Granite Basin Counter: Providing & fixing two layers of wash basin counter, first layer using 25mm thick Kotastone of approved shade and second layer using approved shade and sample of Mirror finishGranite, joined together with 1:4 Cement mortar bedding / approved tile adhesive ,to true plane & level or to slopes, or close jointed with cement slurry with pigment of matching shade and colour and finishing with the same,including dedo 1\"6\",cutting kotah & tileas per required shape & size to fit Wash basin &4\" facia with moulding, nosing, chamfered frontedges,fixing, disposal of debrisetc. finished as per design in detail drawing and instruction of Architect/EIC.sample mock shall be approved from Architect/EIC. |
| 49 | Single Leaf Flush Door finish with laminate: Providing and fixing in position 40 mm thick BWP grade single leaf flush doors of approved make and finished withboth side 1 mm thickVNR laminate as approved sample, Hardware system as per approved make & Sample (Hinges, Mortise lock, Door stopper ) . work complete including all type of hardware, fittings , fixturesas per instruction of Client/ Architect etc complete as per detailed drawings and specifications. sample mock shall be approved from Architect/Client. Equivalent to VNR Series Laminate. |
| 50 | Single Leaf Flush Door finish with laminate (Toilet door):Providing and fixing in position 40 mm thick BWP grade single leaf flush doors of approved make and finished withboth side 1 mm thickVNR laminate as approved sample, Hardware system as per approved make & Sample (Hinges, cylindrical lock, Door stopper). work complete including all type of hardware, fittings , fixturesas per instruction of Client/ Architect etc complete as per detailed drawings and specifications. sample mock shall be approved from Architect/Client. Equivalent to VNR Series Laminate. |
| 51 | Double Leaf Flush Door with glass view panel and finish with laminate : Providing and fixing in position 40 mm thick BWP grade Double leaf flush doors of approved make and finished with both side 1 mm thick VNR laminate as approved sample, with glass view panel,8mm thick toughened Milky glass view panel, Hardware system as per approved make & sample (door closer, Mortise lock, Door handle, lock, Door stopper). work complete including all type of hardware, fittings, fixtures as per instruction of Client/ Architect etc complete as per detailed drawings and specifications. sample mock shall be approved from Architect/Client. Equivalent to VNR Series Laminate. |
| 52 | Thin Profile Glass Partition :Providing & Fixing ofSTL45 ie.Single glazed modular system consist of Aluminium section of 25*45*2.5 mm thick. All sections duly powder coated with 6063-T6 grade and required accessories ie glass to glass aluminium I sections, T section & 90 degree sections & Glass packing to adjust the floor level. Ceiling profile, Floor profile and wall profile are 25 mm visible face and 45 mm wide with 10mm toughen glass as per approved make& insertion of Thermoplastic gasket to adhere the glass firm & airtight.The sound reduction Value is from 32 to 35 Db.With 6 mm Groove inbuilt in system to accomodate the carpet & the uneven surfaces.Accessories/Hardware: neutral cure glazed& metal silicon sealant of approved make on the periphery of the glass & woodetc.Partition ht will be measured from finish floor to false ceiling level only. The rate shall be in sq.mt for all floors and at all heights including all costs. Glasswidth size shall be as per sugestion by EIC.Work complete including all type of material, fittings , fixtures,Finish, safety measures ,loading , unloading , transporation, all leads ,accessories, sample mockup, all floor , all levels, all heightsetc complete as per detailed drawings ,specifications & instruction of Client/EIC. |
| 53 | Frosted sparkling glass film (Colour film) : Providing and fixing frosted glass film of approved make Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs. MCS warranty of 3 (if exposed to direct sunlight) to 10yrs (indoors) must be endorsed by manufacturer. Rate shall be inclusive plotter cutting design as per Architect/Client suggestion. Contractor shall provide shop drawing for approval of Architect/Client.work complete incuding all type of tools, tackles, scaffolding etc complete as per suggestion of Architect/Client. If in case any application finishing will not as per satisfaction contractor shall remove all film at their cost. Contractor shall do a sample mock of 5 Sqm minimum of glass film), shall be approved from Architect/Client. |
| 54 | Thin Profile Double leaf glass door:Supply & Installation of Modular Aluminium Glass door frame of Kubikor equivalent make 45mm System, Using KOPS 001 & KOPS DF 103 ( 45mm x 25mm) for Glass door frameDoorframe Dimension – 45mm x 25mm. Finish – SILVER finish / Powder coating as per approved sample by Architect 10mm thk. clear thoughened Glass KUBIK Glass Hinge, HAFELE Open Door closer with saddel plate, KUBIK Mortiselock with handle, KUBIK Door stoperItem includes all necessary fitting/ fixing,fixtures of approved make complete as per specification, drawing, approval and instructions of the Architect/Client. Rate shall be inclusive of all material loading unloading at all height and all floor. Sample mock shall be approved from Architect/Client. |
| 55 | Sliding window :(Domal 27 mm series) Supply & Fixing of Aluminium sliding window with powder coated as per by approved make & sampleby architect/EIC.frame section:45 x 45x 1.5 mm Shutter section:65 x 27 x 1.4 mm Glass : 5 mm thick tinted grey toughened glass of saint gobain or approved make list including concealed lock, albose, other necessary fixtures and fastening, PVDF rollers, EPDN gasket, silicon sealent etc. complete as per detailed drawings, mock sample and specifications. |
| 56 | Ventilation with provision of Exhaust fan : Supply & Fixing of Ventilation with provision of exhaust fanwith powder coated as per by approved make & sampleby architect/EIC.frame section:45 x 45x 1.5 mm Glass : 5 mm thick Forsted toughened glass of saint gobain or approved make list including necessary fixtures and fastening, EPDN gasket, silicon sealent etc. complete as per detailed drawings, mock sample and specifications. |
| 57 | Rolling shutter: Supplying and fixing rolling shutters of approved make, made of required size M.S. laths, interlocked together through their entire length and jointed together at the end by end locks, mounted on specially designed pipe shaft with brackets, side guides and arrangements for inside and outside locking with push and pull operation complete, including the cost of providing and fixing necessary 27.5 cm long wire springs manufactured from high tensile steel wire of adequate strength conforming to IS: 4454 - part 1 and M.S. top cover of required thickness for rolling shutters. 80x1.25 mm M.S. laths with 1.25 mm thick top cover |
| 58 | Providing and fixing M.S. grills of required pattern in frames of windows etc. with M.S. flats, square or round bars etc. including priming coat with approved steel primer all complete. Fixed to steel windows by welding |
| 59 | EWC : Providing and fixing wash down water closet(European type W.C. pan)as per approved make of selection & shade withseat cover,P OR S Trap M.S. or G.I bracket ,CP brass hinges and rubber buffers and Jointing the trap with soil pipe in cement mortar : 1:1 (1 cement : 1 fine sand)includingcutting and making good the walls and floors where requiredwith all labour and materials.All works to be carried out as per instructions and direction of Engineer-in-charge. Model Equivalent to Jaquar code CNS-WHT-963UFSM |
| 60 | Flushing Tank: Providing and fixingPreumatic Flushing tank ofas per approved make list . Work complete including all type of finishing.Model Equivalent to Jaquar code JCS-WHT-2400 |
| 61 | Flush Plate: Providing and fixing FLUSH PLATE POLISHED CHROME ofas per approved make list . Work complete including all type of finishing. Model Equivalent to Jaquar code JCP-CHR-152415 (CONTROL PLATE OPAL) |
| 62 | Health faucet: Providing and fixing12mm dia. Health faucetwith 8 mm dia of as perapproved make listwith flexiblepipe of 1.mt. length and holding stands complete.Work complete including all type of finishing. Model Equivalent to Jaquar code ALD-CHR-573 |
| 63 | Toilet Papers Holder: Providing and fixing Toilet papers holder of as perapproved makelist. Work complete including all type of finishing. Model Equivalent to Model Equivalent to Jaquar code ACN-CHR-1153S |
| 64 | Two Way Bib Tap: Providing and fixing 15mm dia Two way Bib Cock of as perapproved makelist.Work complete including all type of finishing. Model Equivalent to Model Equivalent to Jaquar code ALD-CHR-5051N |
| 65 | Wash Basin: Providing and fixing Wash Basin includingfittings and waste pipe and fixing on wash basin counter bytile adhesive of approved make.Work complete including all type of finishing. Model Equivalent to Jaquar code CNS-WHT-705 (UNDER COUNTER BASIN WITH FIXING ACCESSORIES, SIZE: 605X430X200 MM, SHAPE: OVAL) |
| 66 | Basin spout : Providing and fixing 15mm dia Basin spoutof as per approved make list and work complete including all type of accessories. Model Equivalent to Jaquar code ARI-CHR- 39441K (EXPOSED PART KIT OF SINGLE CONCEALED STOP COCK CONSISTING OF OPERATING LEVER CARTRIDGE SLEEVE WALL FLANGE (WITH SEALS) & BASIN SPOUT (COMPATIBLE WITH ALD-441)) and + ALD-CHR-441 (CONCEALED BODY ONLY FOR SINGEL CONCEALED STOP COCK WTH BASIN SPOUT (WITHOUT EXPOSED PARTS)) |
| 67 | Urinal : Providing and fixing in position ofUrinal of as per approved make list. Work completed as per theinstruction of EIC. Model Equivalent to Jaquar code URS-WHT-13253N (URINAL, BACK INLET, WITH FIXING ACCESSORIES, SIZE: 385X325X635 MM) |
| 68 | URINAL FLUSH VALVE: Providing and fixing URINAL FLUSH VALVE of as per approved make of selection by architect. Model Equivalent to PRS-CHR-073 (AUTO CLOSING CONCEALED URINAL FLUSH VALVE WITH WALL FLANGE) |
| 69 | Angular Cock: Providing and fixing15mm dia. Angular Cockas per approved make list and work complete including all type of accessories . Model equivalent to Jaquar code ARI-CHR-39053 |
| 70 | Soap Dispensor: Providing and fixing in position Soap Dispensoras per approved make list and work complete including all type of accessories. Model equivalent to JAQUAR - CAT- CAN-1135N |
| 71 | Towel ring: Providing and fixing Towel ringof as perapproved make of selection or as directed by EIC.Jaquar : ACN-1121N |
| 72 | Handrayer : Providing and fixing in position ofHanddrayer of as per approved make list. Work completed as per theinstruction of EIC. Model Equivalent to Jaquar code HDF-SSF-AK2803D |
| 73 | Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms.: 15 mm nominal bore |
| 74 | Providing and fixing CP Brass 32mm size Bottle Trap of approved quality & make and as per the direction of Engineer-in-charge. with necessary coupling for wash basin & sink. |
| 75 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 76 | Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : Rectangular shape 1500x450 mm |
| 77 | Providing and fixing 600x120x5 mm glass shelf with edges round off, supported on anodised aluminium angle frame with C.P. brass brackets and guard rail complete fixed with 40 mm long screws, rawl plugs etc., complete. |
| 78 | Urinal partition: Providing and fixing stone slab with table rubbed, edges rounded and polished, of size 75x50 cm deep and 1.8 cm thick, fixed in urinal partitions by cutting a chase of appropriate width with chase cutter and embedding the stone in the chase with epoxy grout or with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 6 mm nominal size) as per direction of Engineer-in-charge and finished smooth. Granite Stone of approved shade |
| 79 | Toilet Cubical : @1000(W) X 1500(D) x 2050(H) mm Supply & Installation of Toilet Cubicles as per as per Architect selection & approved make.12 mm Compact Grade 1.5 mm thick laminateBoard of the approved shade by Architect . Accessories for cubicles.1. Aluminum “U” Section with SS Exterior grade Finish.2. Aluminum “H” Section with SS Exterior grade Finish.3. Aluminum Top Rail with SS Exterior gradeFinish.4. SS Coat Hook ( SS 316 )5. SS Privacy Thumb Turn ( SS 316)6. SS Door Knob ( SS 316)7. SS Hinges ( SS 316)8. SS Adjustable Leg ( SS 316)With Rubber lining and Screw Etc. Work complete including all type of fittings, fixtures, tools, etc complete as per manufacturer specification and drawing. |
| 80 | Alluminium Perforation sheet facade: Providing Fabrication & erection of 2 mm thick Exterior gradepure Alluminium sheet with perforation &as per reference image given by Architect. The work includig necessary Alluminium fittings/ framing, fixtures, accessories, cutting, engraving etc complete. The scope includesScaffolding, loading, transportation, unloading and delivery and erection site of all fabricated structures, alignment and welding of all structures true to line, level, plumb and dimension. sample mock shall be approved from Architect/EIC.Shop drawing shall be provided by Contractor. MS fabrication, perforation, cnc cutting shall be paid by Separate item |
| 81 | Tensile Roofing : Designing, providing, fabricating, assembling, erecting and installing outdoor tensile fabric structure using exterior grade tensile fabric of approved brand, colour, shade and quality (in conformity with ISO 9001) in required architectural profile including fabric designing and seaming as per Shop drawings and made out of pre-stressed directly weldable PTFE Type-II tensile fabric with UV resistant, flame retardant & anti-bacterial properties.The tensile fabric shall conform to the following parameters:900 GSM - Type II Tensile Fabric– Fire Retardant (Sattler / Serge Ferrari Make/ or equivalent). All patterns shall be cut from a single sheet of fabricMin 40 mm width welding on 22KW High-Frequency MachinesAll Patterns will be single-laid. All panels shall be cleaned & marked before packing(i) Minimum weight of 900 g/m2 (ii) Minimum Tensile Strength (Warp/ Weft) - 420/400 daN/5cm (iii) Minimum Tear Strength (Warp/ Weft) - 55/50 daN (iv) Fabric shall be high fire resistant with Euro Class rating - B1/DIN-4102-1, low-wick treatment Steel Structure : The system shall include for all steel frames in the profile shape as per drawings with special plate connectors,pinion joints, plates, hollow sections etc. including all arch beams, curved lateral beams and bracings (if required), vertical support columns, nodal joints, bases of columns, perimeter attachment system, fittings, fixtures such as hot dipped galvanized/stainless steel corner plates as approved, shackles, rigging screws, high tensile bolts of minimum 8.8 grade, turn buckles, wedges,forks, keder rods & galvanized MS strands/cables of required length and diameter or as approved.Tensile steel structure design and fabrication for 25 years product life as per local wind speed. The complete structure shall be manufactured using CNC machines as per the design and profile of the structure. Structure should be designed in IXCube/ETAB/STAAD. All the welding should be full welding and a qualtiy assurance plan (QAP) to be submitted before start of manufactuing of material.J-hook anchor bolts of minimum grade 8.8 to be supplied of RINL or equivalent make. Test certificates to be submitted along-with the dispatch of material.All Fittings & Fixtures should include MS Membrane Plate as per design;All MS Structural Members Plates, CHS / RHS / SHS – as per design Surface Treatment.All MS Frames shall be supplied with manual cleaning & 2-coats of anticorrosive epoxy paint having DFT 200 to 250 micron and top one coat of PU paint having DFT 50-100 micron. So, total paint thickness should be minimum 300 micron DFT.All steel material make shall be out of- Ravindra Tubes/ Prakash Surya Steel Tubes/ APL Apollo Steel Tubes/ JSW Steel Tubes/ TATA Steel tube or equivalent.Grade of steel used should be minimum 345 MPa.Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the Detailed specification, shop drawing , approved sample, Test certificate , Stability certificate ,instruction of Architect/EIC.Sample mock shall be approved from Architect/EIC. |
| 82 | Fabrication work : Design, Fabrication & erection of steelstructure as perdrawings including materials, consisting of plates, rolled steel joists, channels, angles, chequered plates etc and also rectangular / square hollow steel sections, insert plates in RCC/Brickwork, anchor bolts for steel structure, sleeve pipes, anchor nuts, washers etc, straightening of raw steel if required, fabrication of steel structures with primer and minimum two coats of anti corrosive paint/ Epoxy paint (two or more coats)including preparation of supplementary sketches and detailed bill of materials supply of bolts, nuts, washers, shims, packs, putty. gas, welding electrodes and all other consumables, as required and carrying out surface preparation all complete. The scope includes loading, transportation ,unloading and delivery and erection site of all fabricated structures,, alignment and welding of all structures true to line, level, plumb and dimension, including rectification if any, splicing, site assembly all as per technical specifications and drawings, ,all complete. Contactor shall providestability certificate for thefabrication structure. Rate inclusive of shop drawing. |
| 83 | Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-in-charge. Made of G.I. wire of dia. 4 mm, PVC coated to achieve outer dia not less than 5 mm in required colour and shade |
| 84 | Construction of granular sub-base by providing close graded Material conforming to specifications, mixing in a mechanical mix plant at OMC, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness with motor grader on prepared surface and compacting with vibratory power roller to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge. With material conforming to Grade-I (size range 75 mm to 0.075 mm) having CBR Value-30 |
| 85 | Providing, laying, spreading and compacting graded stone aggregate (size range 53 mm to 0.075 mm ) to wet mix macadam (WMM) specification including premixing the material with water at OMC in for all leads & lifts, laying in uniform layers with mechanical paverfinisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achievethe desired density, complete as per specifications and directions of Engineer-in-Charge. |
| 86 | Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transported to site by tippers, laid over a previously prepared surface with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compaction and density, complete as per specificatons and directions of Engineer-in-Charge.; 50 to 100 mm average compacted thickness with bitumen of grade VG-30 @ 3.50% (percentage by weight of total mix) prepared in Drum Type Hot Mix Plant of 60-90 TPH capacity. |
| 87 | Providing and laying Bituminous concrete using crushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paver finisher equiped with electronic sensor to the required grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers to achieve the desired compaction and density as per specification, complete and as per directions of Engineer-in-Charge. ; 40/50 mm compacted thickness with bitumen of grade VG-30 @ 5.5% (percentage by weight of total mix) and lime filler @ 3% (percentage by weight of Aggregate) prepared in Batch Type Hot Mix Plant of 100-120 TPH capacity. |
| 88 | Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 40 mm nominal size) in pavements, laid to required slope and camber in panels as required including consolidation finishing and tamping complete. |
| 89 | TERRENE FLEX OUTDOOR PU SPORTS FLOORING: Supply and Installation of TERRENE FLEX OUTDOOR PU SPORTS FLOORING For Handball / Volleyball / Basketball as per drawing.European made,Thickness – 7 mm, First layer of PU primer on base floor, second layer of SBR with PU bind in situ, third layer of PU sealer coat, fourth layer of self leveling and fifth layer of PU topcoat paint.BWF / FIBA Certified.Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift, waranty certificate etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. |
| 90 | Outdoor Acrylic Flooring: Supply and Installation of Outdoor Acrylic Floooring For Pickleball/ Tennis as per drawing.Make - Terrne - ITF Certified , 7 Layer System,1 Layer of Resurfacer, 3 Layer of Rubber Cushion, 3 Layer Top Coat,Line Marking,Including cost of all type of tools, tackles, all labour, materials, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift, waranty certificate etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. |
| 91 | Athletic running track flooring : TERRENE FLEX Athlete Track:Supply & InstallationWith LINE MARKING -ATHLETICSTRACK SYSTEM ON Botumen Base(AS PER INTERNATIONAL AthleticSTANDARDS ). Providing & fixing of 14-15 mm thick Trackas below,1. PRIMER PU COATING2. Bottom layer - 11 MM thick SBR GRANULE.3. SEAL COAT4. COLORED PU SPRAYED ON (IAAF COMPLIANT) EPDM granules(Size 1-3.5 mm) achieving total thickness ofMIN 14 mm EPDM GRANULE.5. LINE MARKINGAny other items which are required tocomplete the Track in all respects is part ofvendor scope.MATERIAL SPECIFICATIONS:22% POLYMER CONTENT ORABOVE,EPDM HIGH UV RATING, LESS VOC ANTIMICROBIAL & ANTIFUNGAL RAW MATERIAL ORIGIN - USA/ EUROPE/JAPAN EPDM GRANULESIncluding cost of all type of tools, tackles, all labour, materials, transportation, cleaning, at all floor, all level, all depth, all Height, all lead and lift, waranty certificate etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. |
| 92 | Providing and laying 60mm thick faciory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete as per the direction of Engineer-in-charge. |
| 93 | Providing and laying at or near ground level factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5mm), including making drainage opening wherever required complete etc. as per direction of Engineer-in-charge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). |
| 94 | Trenching in ordinary soil up to a depth of 60 cm including removal and stacking of serviceable materials and then disposing of surplus soil, by spreading and neatly levelling with all lead and making up the trenched area to proper levels by filling with earth or earth mixed with sludge or / and manure before and after flooding trench with water (excluding cost of imported earth, sludge or manure). |
| 95 | Supplying and stacking of good earth at site. work complete including royalty, all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, all heights, all levels, all lead & all lift etc complete as per instruction of Architect/EIC. (earth measured in stacks will be reduced by 20% for payment). |
| 96 | Supplying and stacking at site dump manure from approved source, work complete including royalty, all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, all heights, all levels, all lead & all lift etc complete as per instruction of Architect/EIC. (manure measured in stacks will be reduced by 8% for payment) : |
| 97 | Rough dressing the trenched ground including breaking clods. work complete including all type of tools, tackles, scaffolding, safety measures, loading, unloading, transportation, all heights, all levels, all lead & all lift etc complete as per instruction of Architect/EIC. |
| 98 | Uprooting weeds from the trenched area after 10 to 15 days of its flooding with water including disposal of uprooted vegetation |
| 99 | Fine dressing of the ground. |
| 100 | Spreading of sludge, dump manure and/or good earth in required thickness as per direction of officer-in-charge (cost of sludge, dump manure and/ or good earth to be paid separately). |
| 101 | Mixing earth and sludge or manure in the required proportion specified or directed by the Officer-in-charge |
| 102 | Grassing with selection No. 1 truf grass including watering and maintenance of the lawn for 30 days or more till the grass forms a thick lawn, free from weeds and fit for mowing including supplying good earth, if needed . With grass Turf |
| 103 | Preparation of beds for hedging and shrubbery by excavating 60 cm deep and trenching the excavated base to a further depth of 30 cm, refilling the excavated earth after breaking clods and mixing with sludge or manure in the ratio of 8:1 (8 parts of stacked volume of earth after reduction by 20%: one part of stacked volume of sludge or manure after reduction by 8%), flooding with water, filling with earth if necessary, watering and finally fine dressing, leveling etc. including stacking and disposal of materials declared unserviceable and surplus earth by spreading and leveling as directed, within a lead of 50 m, lift up to 1.5 m complete (cost of sludge, manure or extra earth to be paid for separately) |
| 104 | Shrubs:-Providing and planting the saplings of shrubs as per approved varieties sample by Architect. complete as per detail specification.Work complete including all labour, tools, tackles, maintenance with 30 days or more till the shrubs forms a thick etc |
| 105 | Trees :-Providing and planting the saplings of trees of approved varieties by Architect.complete as per detailed specification. .Work complete including alllabour , tools , tackles , maintenancewith 30 days or moretill the treeforms a thicketc |
| 106 | Bottle Palm :-Providing and planting the saplings of Palm treeof approved varieties by Architect.complete as per detailed specification. .Work complete including alllabour , tools , tackles , maintenancewith 30 days or moretill the Palm tree forms a thicketc |
| 107 | Rate Only Item |
| 108 | Gypsum Ceiling: Providing and fixing false ceiling at all height including providing and fixing of frame work made of special sections, power pressed from M.S. sheets and galvanized with zinc coating of 120 gms/sqm (both side inclusive) as per IS : 277 and consisting of angle cleats of size 25 mm wide x 1.6 mm thick with flanges of 27 mm and 37mm, at 1200 mm centre to centre, one flange fixed to the ceiling with dash fastener 12.5 mm dia x 50mm long with 6mm dia bolts, other flange of cleat fixed to the angle hangers of 25x10x0.50 mm of required length with nuts & bolts of required size and other end of angle hanger fixed with intermediate G.I. channels 45x15x0.9 mm running at the spacing of 1200 mm centre to centre, to which the ceiling section 0.5 mm thick bottom wedge of 80 mm with tapered flanges of 26 mm each having lips of 10.5 mm, at 450 mm centre to centre, shall be fixed in a direction perpendicular to G.I. intermediate channel with connecting clips made out of 2.64 mm dia x 230 mm long G.I. wire at every junction, including fixing perimeter channels 0.5 mm thick 27 mm high having flanges of 20 mm and 30 mm long, the perimeter of ceiling fixed to wall/partition with the help of rawl plugs at 450 mm centre, with 25mm long dry wall screws @ 230 mm interval, including fixing of gypsum board to ceiling section and perimeter channel with the help of dry wall screws of size 3.5 x 25 mm at 230 mm c/c, including jointing and finishing to a flush finish of tapered and square edges of the board with recommended jointing compound , jointing tapes , finishing with jointing compound in 3 layers covering upto 150 mm on both sides of joint and two coats of primer suitable for board, all as per manufacturer\"s specification and also including the cost of making openings for light fittings, grills, diffusers, cutouts made with frame of perimeter channels suitably fixed, all complete as per drawings, specification and direction of the Engineer in Charge but excluding the cost of painting with : 12.5 mm thick tapered edge gypsum plain board conforming to IS: 2095- (Part I) :2011 (Board with BIS certification marks) |
| 109 | Overall Toilets - Calcium silicate grid ceiling : Providing and Fixing 15 mm thick densified tegular edged eco friendly light weight calcium silicate false ceiling tiles of approved texture of size 595 x 595 mm in true horizontal level, suspended on inter locking metal grid of hot dipped galvanised steel sections (galvanising @ 120 grams per sqm including both side) consisting of main ‘T’ runner suitably spaced at joints to get required length and of size 24x38 mm made from 0.33 mm thick (minimum) sheet, spaced 1200 mm centre to centre, and cross “T” of size 24x28 mm made out of 0.33 mm (Minimum) sheet, 1200 mm long spaced between main’T’ at 600 mm centre to centre to form a grid of 1200x600 mm and secondary cross ‘T’ of length 600 mm and size 24 x28 mm made of 0.33 mm thick (Minimum) sheet to be inter locked at middle of the 1200x 600 mm panel to from grid of size 600x600 mm, resting on periphery walls /partitions on a Perimeter wall angle pre-coated steel of size(24x24X3000 mm made of 0.40 mm thick (minimum) sheet with the help of rawl plugs at 450 mm centre to centre with 25 mm long dry wall screws @ 230 mm interval and laying 15 mm thick densified edges calicum silicate ceiling tiles of approved texture in the grid, including, cutting/ making opening for services like diffusers, grills, light fittings, fixtures, smoke detectors etc., wherever required. Main ‘T’ runners to be suspended from ceiling using G.I. slotted cleats of size 25x35x1.6 mm fixed to ceiling with 12.5 mm dia and 50 mm long dash fasteners, 4 mm G.I. adjustable rods with galvanised steel level clips of size 85 x 30 x 0.8 mm, spaced at 1200 mm centre to centre along main ‘T’, bottom exposed with 24 mm of all Tsections shall be pre-painted with polyster baked paint, for all heights, as per specifications, drawings and as directed by Engineer-in-Charge. Note :- Only calcium silicate false ceiling area will be measured from wall to wall. No deduction shall be made for exposed frames/opening (cut outs) having area less than 0.30 sqm.The calcium silicate ceiling tile shall have NRC value of 0.50 (Minimum), light reflection > 85%, non- combustible as per B.S. 476 part IV, 100% humidity resistance and also having thermal conductivity <0.043 w/mK. |
| 110 | Mettalium Wooden Plank Ceiling: Supplying and Installing of METALIUMTM make U- Shaped Screen 50*50*50mm (50mm gap) open false ceiling system.Panel (Galvanized Steel): Metalium make square edge P-50 series panels, 50 mm wide x 50 mm deep & 0.50 mm TCT Galvanized Steel as per IS-513. Panel length is up to approx. 3 mtr. Panel shall be coil / powder coated on external surface only. When two panels are to be joined, they shall be joined together by means of panel coupler suitable for U Shaped Screen Panel.Paint Detail: Coil coated panel shall be chromatized for maximum bond between metal and paint, enamelled twice under high temperature, one side with full primer and finish coat, the other side (Inner side) with a primer coating and skin coat on continuous paint line or Powder coated panel shall be 50 microns thick on exposed surface.P-50 Carrier: Carrier shall be 20mm wide at bottom and 39 mm deep with cutouts to hold the panel in a module of 100 mm, carrier shall be roll formed out of 0.60 mm Galvanized steel and cut to a standard length of 2.4 mtr. When two or more carriers are to be joined, they shall be joined together by means of carrier coupler which will clip on to the holes in the sides of the cut carrier and hold them firmly in place while maintaining the module of 100mm centre to centre.Installation detail: The carrier shall be suspended from slab/truss by 4mm dia galvanized rod & height adjustment powder coated spring steel clips at maximum 1.2 to 1.5 meter Centre to centre. The 4mm dia galvanized rod shall be fixed to slab by forming one end “J” shape with roll inserts.Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads, all accessorie , Scaffoldingetc as described in item description. Work complete as per the detailed drawing , mockup sampleand instruction of Architect/Client. |
| 111 | Profile Mirror with LED Light: Providing and fixing Profile mirror with LED Light as required shape, as per approved make & sample.Size : 800mmx1500mmGlass: 5 mm thick mirrorFrame : Aluminum frame of size 40mm x 9mm, Brush gold finishRate shall inclusive all type of material, fittings, fixtures, LED light, if required ply frame/paking, Finish, loading, unloading, transportation,all leads, accessories, groove, adhesive, tape, headless nails, sample mockup, all floor, all levels, all heights etc complete as per detailed drawings, specifications & instruction of Client/EIC. sample mock shall be approved from Architect/Client. |
| 112 | Reception Table: @ 1800 x 675 x 1050 mmProviding and fixing Reception table unit consist main table with pedestal unit with all necessary accessories keyboard,CPU stand , cable manager, etc with all required necessary accessories.Inside: 19mm thick plywood finish with 0.8mm thick Linear laminate. Basic rate of Laminate is 500 per sheet. Working Desk Top: 19mm thick plywood finish with 1 mm thick laminate. Basic rate of Laminate is 1300 per sheet. Table front: 19mm thick plywood finish with 1 mm thick laminate, backlit and logo engarving work complete as per detail drawing.Verticle support: As per detail drawing and reference image 19mm thick plywood finish with 1 mm thick laminateproviding and fixing as per requirement of socket and quantity Pop up tabletop electrical WIRE MANAGEMENT BOX SS finish and 3nos. of drawers as per drawing. The work shall be done as per the detailed drawing , specifications, sample approved and as directed by the Architect/Client. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles, adhesives consumable hardware & required SS 304 grade hardware/accessories, grooves pvc edge banding, etc of approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect\"s design intent. No additional claims will be entertained for this. |
| 113 | Sofa : Three seaterComprising from Solid teak wood with PU semi gloss finished polish. The seat shall 150mm th 40 density & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in PU semi gloss finish polish.The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect\"s design intent. No additional claims will be entertained for this.Rate shall inclusive of providing mockup sample for approval of architect. Basic rate of fabric 1000/ Rmt |
| 114 | Sofa : Two seaterComprising from Solid teak wood with PU semi gloss finished polish. The seat shall 150mm th 40 density & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in PU semi gloss finish polish.The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect\"s design intent. No additional claims will be entertained for this.Rate shall inclusive of providing mockup sample for approval of architect. Basic rate of fabric 1000/ Rmt |
| 115 | Sofa : One seaterComprising from Solid teak wood with PU semi gloss finished polish. The seat shall 150mm th 40 density & back shall be 32 density foam & finished in Approved fabric upholstery as per the drawing/image and instruction from Architect/EIC all external & internal exposed woodwork to be finished in PU semi gloss finish polish.The work shall be done as per the approved shop drawing (to be prepared by contractor), specifications, sample approved and as directed by the Architect and Engineer-in-charge. The rate shall be for complete item inclusive of all material, labour, wastages, necessary tools & tackles,approved make for all floors, all heights, all levels and all places within campus. Contractor shall do all the needful and shall fulfill Architect\"s design intent. No additional claims will be entertained for this.Rate shall inclusive of providing mockup sample for approval of architect. Basic rate of fabric 1000/ Rmt |
| 116 | Center Table: size of bigger table-2\"6\" Dia and smaller table-2\" Dia, Location: Waiting area, VIP lounge, Refree room Providing & Fixing of CENTER TABLE SET as per detail drawings.Top : 15mm thick solidwood and colour HDF with PU polishBase : Vertical support of Metal legs with powder coatingFinish : Powdercoating on Metal frameSize of bigger table-2\"6\" Dia.Size of smaller table-2\" DiaWork complete includingall necessary hardware and fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 117 | Corner Table:Size-1\"6\" Dia, Location: Waiting area, VIP lounge, Refree room \" ------------------Do------------------\" as per above specification for complete work. |
| 118 | TV unit: 2800 x 400 x 300 mm, Location: VIP lounge, Refree room Providing and fixing TV ledge unit comprising from MR grade ply with 1 mm thick VNR laminate finish as per approved sample. TV unit consisting 2nos. of Drawer & 1nos. niche.Work complete including all necessary hardware and fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 119 | Changing room Lockers : Supplying and Installing in position of 1 Locker Unit size: 750 W x 600D x 2100H as per approved make. 2 shutters storage, 2 open shelve, 1 drawer & 1 open box seatingin each unit made out of plywood finish with 1mm thick VNR laminte for Carcass & Shelves Each compartment has an individual locking mechanism pre-fitted to it. 1 Drawer unit below seating of size 750X600X300mm, Shutter storage above seating of size 375x387x300mm & 750x387x300mm, Open shelves over seating of size 750x350x300mm made out of plywood finish with 1mm thick VNR laminte with open hangers storage for cloths at Back of seating.Including cost of all type of tools, tackles, all labour, scaffolding, all type of materials, lock key, transportation, cleaning etc. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. |
| 120 | Wooden bench: 1500X450X450MM.Providing and fixing Wooden bench finish with PU polish as approved sample.Base: Metal frame leg.Finish: Powder coating on metal frame leg as approved. Including cost of all type of tools, tackles, all labour, scaffolding, all type of materials, lock key, transportation, cleaning etc. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. |
| 121 | Examination bed: 1830mm X 560mm X 810mmProviding and fixing Examination bed as approved sample.Finish : 22 guage CRCA sheet with epoxy powder coated to approved finish.Bed top in upholstered and covered with washable plastic material.4nos.of drawers and 2nos. of cabinet with separate door in 20guege CRCA sheet at bottom and step stool.Including cost of all type of tools, tackles, all labour, scaffolding, all type of materials, lock key, transportation, cleaning etc. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. |
| 122 | Petient bed: 2000mm X 925mm X 600mmProviding and fixing Petient bed as approved sample.Finish : CRCA sheet with epoxy powder coated to approved finish.Bed top with 18 guege CRC pipe & frame with 18guege 60x30mm with foam finish mattress with rexin cover. Legs : 31mm dia. & 18 guege CRC pipe.Bows : 31mm dia & 18 GUege SS pipe. also includes IV stand.Backrest includes a system of manual lift through a handle.Including cost of all type of tools, tackles, all labour, scaffolding, all type of materials, lock key, transportation, cleaning etc. Work complete for at all floor, all level, all depth, all Height, all lead and lift etc. work complete as per the detailed drawing, approved sample, specifications and instruction of Architect/EIC. Sample mock shall be approved from Architect/EIC. |
| 123 | Doctor room table unit: Table top : 1500 x 750 x 750mm,Side Unit :1050 x 450x 650 mm, Pedestal Unit-400x420X650.Providing and fixing table unit consist main table, side table, with pedestal unit with all necessary accessories keyboard, CPU stand ,cable manager, modesty panel etc with all required necessary accessories. All finishes laminate, powder coating shall be approved by architect. Rate shall inclusive of mock up sampleproviding and fixing at site of unit for approval of architect.Table top : 25mm thick Pre-laminated with reverse waterfall profile at users side with edge band as per approved shade. 25mm thick pre-laminated gable end with edge banding. Modesty panel of MS with powder coated as per approved make and sample by Architect/ Client.Side unit: 25mm thick Pre-laminated as per approved shade. Verticle support (Leg):MS strip (Accent) support with powder coated. Horizontal Support: MS support with powder coated. Wire management: Raceway : 0.8 mm thick CRCA horizontal and vertical raceways with metal separator .one way or two way openable flip top box mounted on table top squezze :A special flexible rubber component that allows easy and safe passage of wires. All the exposed edges are sealed with 2mm thick PVC Imported edge banding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The pedestal unit consists of 1 box drawer and 2 file drawer. The drawer box is fitted with telescopic channel Hettich or Haffle make for free movement. The drawer unit is provided with central locking system, where in the drawer are locked with one key.SS 304 recessed handles are provided for easy opening and closing of drawer. The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, monocoat polish, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing, mockup sample and instruction of Architect/Client. Equivalent to VNR Series Laminate. |
| 124 | Revolving chair : Location: Doctor room, Admin areaModel equivalent to Mid BackEvo02 : HighBack Revolving Chair as per approved make list.Chair With frame in MS, PU foam in back & Moulded PU Seat, Chrome Arms with PU cladding & Synchro Mechanism, Chrome base & Gas Lift.Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 125 | Revolving chair : Location: Doctor room, Workstation, Visitors, Cubical head Model equivalent to Low Back Evo02 : HighBack Revolving Chair as per approved make list.Chair With frame in MS, PU foam in back & Moulded PU Seat, Chrome Arms with PU cladding & Synchro Mechanism, Chrome base & Gas Lift.Work complete includingall necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 126 | Teacher table: Size 1500mm X 600mm X 750mmModel no.: Silence 03 Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 127 | Teacher chair:Model no.: Evo 03 : Medium Back ChairBack Frame in Moulded Nylon & PP, PU moulded Cushion on Seat,Back Lumber Support, Nylon Mesh in Back with Fix Arms & frame in 22mm dia Pipe in Stainless Steel.Work complete including all necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 128 | Study table with seating, Location: ClassroomSize: 1100mmX400mmX750mmTable top: 25mm thick BSL with all side edge banding with PP pencil tray inserted.Seat with back supports & Attached Bottle HookSupport: MS 40x20mm oval pipe with book rack below duly powder coated. Work complete includingall necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 129 | Admin Cabin Furniture: size of desk: 1800x900x750mm, Side unit size: 1050x450x650mm, Back side storage unit size: 2575x450x650mmProviding and fixing table unit consist main table with pedestal unit with all necessary accessories,keyboard, CPU stand, cable manager, modesty panel etc.Main Table Top: 35 mm thick top comprising from IS 303 BWR ply with Laminate finish , MS framing workas per approved sample and make by Architect. Modesty panel : Comprising from IS 303 BWR ply with outer side 1mm thick Laminate finish & inner side finish with 0.8mm thick linear laminate. Vertical support:50 mm thick vertical support with MS powder coated, necessary Framingas per detailed drawing.Pedestal unit(size 400x420X650): Pedestal comprisingfrom IS 303 BWR ply with outer side 1mm thick Laminate finish & inner side finish with 0.8mm thick linear laminate. Work including require nos of drawer, all type of fittings, fixtures, SS 304 grade conceal profile handle, hardware as per approved make. Wire management: one way or two way open able flip top box mounted on table top squeeze: A special flexible rubber component that allows easy and safe passage of wires. Back side storage unit: Comprising from IS 303 BWR ply with outer side 1mm thick Laminate finish & inner side finish with 0.8mm thick linear laminate with openble shutter The work shall be done as per the detailed drawing, specifications, sample approved and as directed by the Architect/Client. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, monocoat polish, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing, mockup sampleand instruction of Architect/Client. Equivalent to VNR Series Laminate. |
| 130 | Cubical Furniture: size of desk: 1500x750x750mm, Side unit size: 1050x450x650mmProviding and fixing table unit consist main table with pedestal unit with all necessary accessories,keyboard, CPU stand, cable manager, modesty panel etc.Main Table Top: 35 mm thick top comprising from IS 303 BWR ply with Laminate finish, MS framing workas per approved sample and make by Architect. Modesty panel : Comprising from IS 303 BWR ply with outer side 1mm thick Laminate finish & inner side finish with 0.8mm thick linear laminate. Vertical support:50 mm thick vertical support with MS powder coated, necessary Framingas per detailed drawing.Pedestal unit(size 400x420X650): Pedestal comprisingfrom IS 303 BWR ply with outer side 1mm thick Laminate finish & inner side finish with 0.8mm thick linear laminate. Work including require nos of drawer, all type of fittings, fixtures, SS 304 grade conceal profile handle, hardware as per approved make. Wire management: one way or two way open able flip top box mounted on table top squeeze: A special flexible rubber component that allows easy and safe passage of wires. The work shall be done as per the detailed drawing, specifications, sample approved and as directed by the Architect/Client. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, monocoat polish, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing, mockup sampleand instruction of Architect/Client. Equivalent to VNR Series Laminate. |
| 131 | Low height storage:Size : 1500mm X 400mm X 1275mmStorage unit top made up of 25mm thick exteriorgrade Prelaminated partical board (PLPB) table top with 1mm thick approved laminate. The top has a post formation round edge finish with both side laminate. Storage body is made of 18mm thick MDF top with exterior grade finish with both side 1 mm thk. laminate . Shutter finish with both side 1 mm th laminate. The back of the unit is made from 9mm prelaminated board. All the exposed edges are with 2mm PVC edge Imported banding & sealed edges are with 0.8mm thick PVC Imported edge banding. Having premium lock with wave key technology and side and hinged shutters are sealed with 2mm thick PVC edge banding.SS 304 recessed handles are provided for easy opening and closing ofshutter. The units are assembled by knock down fittings such as Minifix & Dowels. All the hardware and Hinges are from Enox/Ebco. PVC edge banding are imported from Rehau or Dolken of Germany. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, monocoat polish, placing at all floors and for all leads, all accessories as described in item description. As approval of EIC. All the work complete as per the detailed drawing, mockup sampleand instruction of Architect/EIC. Work complete as per the instruction of EIC. |
| 132 | Workstation - Size: 1200 x 600 x 750mm :Providing and fixing Workstation as per concept layout provided by Architect. Client.Table Top :25mm thick exteriorgrade Prelaminated partical board (PLPB) table top with PVC edge bedding. Race way: Below table horizontal & vertical metal raceway with powder coated.Modesty: Made in Prelaminated partical board (PLPB) with PVC edge bedding, metal leg support with powder coated.Glass Divider :Lacquered glass with 300 mm height above table top Cost to include that for fixing to the partition with necessary brackets, cleats etc. Cost also to include that for 1 no. MS ivory / matching to top powder coated wire manager per work station complete as per drawings & direction with necessary gable end.Leg Panel/ Gable end:Powder coated Metal leg as per selection of Architect/Client. Work complete as per drawing & direction complete with all standard fittings & fixtures, keyboard, cpu stand, levelling screws etc. Proper fixing arrangement to floor/tiles for partition. Rate shall inclusive of mock up sample, all materials, loading, unloading, transportation, placing at all floors and for all leads, and all accessories as described in item description. Rate inclusive of all necessary adjustment as per site requirement by filled top and vertical support partition or any necessary required accessories. |
| 133 | Pedestal Unit: @400x420X650Comprising fromof 25mm thick exteriorgrade Prelaminated partical board ( PLPB) table top with PVC edge bedding on sides and bottom. The top and drawer facia are sealed with 2mm thick PVC edge. The drawer unit consists of 1 box drawer and 2 file drawer. The sides of Inside drawer box are of PLPB. The drawer box is fitted with telescopic chanel hettich or haffle makefor free movement. The drawer unit is provided with central locking system, where in the three drawer are locked with one key.SS 304 recessed handles are provided for easy opening and closing of drawer.The drawer unit is fitted on castors (optional) for easy mobility. PVC edge banding are imported from Rehau or Dolken of Germany. The complete furniture unit is factory assembled with knock down fittings. Work complete includingall necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 134 | Sloted metal racks: size 900mm x 450mm x 2100mm, Location: Store roomProviding & Fixing of store room metal racks as per detail drawings.Make: Amardeep or equivalent make as per approved make list.Finish : GI with Powdercoating Size of900mm x 450mm x 2100mmWork complete including all necessary hardware and fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 135 | Signages Type 1 : 3D letters with LED : Wall MountedMaterial : 3 mm thick exterior grade premium quality ACP sheet (0 .25 mm foil thickness) & and 3D Embossed virgin acrylic/aluminum letters as per approvedmake and sample by Architect/ Client.Led Light : Rishang(Korea) and SMPS as per approved make and sample by Architect/ Client.The rate shall be for complete item of Designing, providing, fixing & erection, inclusive of all material, labor, wastages, necessary tools & tackles, adhesives, required hardware/accessories, any type of framing work, engraving, required civil work with finishing, LED light .Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications & instruction of Client/EIC. |
| 136 | Signage\"s : Providing and fixing Signage\"s comprising from combination of HDF sheet & SS plate with laser cutting, 3M Vinyl letter with framing work if required with anti corrosion paint.The rate shall be for complete item inclusive of all material, buffing edge, labor, wastages, necessary tools & tackles, adhesives, consumable hardware & required SS 304 grade hardware/ accessories of approved make.Work complete including all type of material, fittings, fixtures, Finish, loading, unloading, transporation, all leads, accessories, sample mockup, all floor, all levels, all heights, etc complete as per drawings, specifications & instruction of Client/EIC. |
| 137 | Painting : Providing Wall paitingas per Architects selection . Basic rate of paintingis 3000/- NosWork complete includingall necessary fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 138 | Planter box: Providingmaking, fixing as per detail drawing and required length and depth shall be made from19mm IS 710 BWP ply with both side laminate finish and providing lighting arrangement cutout and fixing as per detail drawing and instruction. Rate shall inclusive all necessary hardware and fitting, ms framing, paint. The work shall be done as per the specifications, sample approved and as directed by the Architect/ Client. Rate shall inclusive of providing mockup sample for approval of Architect/ Client. Rate shall be inclusive of all materials, loading, unloading, transportation, placing at all floors and for all leads, polishing and all accessorie, sample mockup etcas described in item description.work complete as per the instruction of Client/EIC. |
| 139 | Pavilion Chair : Supply and fixing of pavilion chair as per approved make & sample by Architect/ Client. HDPE blow moulding seat & back.Stand:Aluminium Stand with coating fitting with Anchor Fasteners. with required accessories Handle, Cup Holder,Cusion,Lable, etc.Work complete including all necessary hardware and fittings, mock up sample, loading, unloading, transportation, placing at all floors and for all leads, all accessories as described in item description. Work complete as per the detailed drawing and instruction of Architect/Client. |
| 140 | ELECTRICAL |
| 141 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5sq.mmFRLSPVC insulated copper conductor singlecorecableinsurface/ recessed medium classPVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required.:Group A |
| 142 | Wiring for group controlled (looped) light point/fan point/exhaust fan point/ call bell point ( without independent switch etc.) with 1.5 sq. mm FRLS PVC insulated copper conductor single corecable in surface/ recessed PVC conduit, and earthing the pointwith 1.5 sq. mm FRLS PVC insulated copper conductor single core cable etc. as required.: Group A |
| 143 | Wiring fortwin control light point with 1.5sq.mmFRLSPVC insulated copper conductor single core cable in surface/ recessedmedium class PVC conduit, 2way modularswitch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm FRLSPVC insulated copper conductor single core cable etc. as required. |
| 144 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduitas required.: 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire |
| 145 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 146 | 2 X 4 sq. mm + 1 X 4 sq. mm earth wire |
| 147 | Supplying and fixing of following sizes of medium class PVC conduit along with accessories in surface/recess including cutting the wall and making good the same in case of recessed conduit as required.: 25 mm |
| 148 | 32 mm |
| 149 | Supplying and fixing following modular switch/socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required.: 5/6 amps switch |
| 150 | 15/16 A switch |
| 151 | 3 pin 5/6 A socket outlet |
| 152 | 6 pin 15/16 A socket outlet |
| 153 | Telephone socket outlet |
| 154 | Bell push |
| 155 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc. as required.: 1 or 2 Module (75mmX75mm) |
| 156 | 3 Module (100mmX75mm) |
| 157 | 4 Module (125mmX75mm) |
| 158 | 6 Module (200mmX75mm) |
| 159 | 8 Module (125mmX125mm) |
| 160 | Supplying and fixing following Modular base & cover plate on existing modular metal boxes etc. as required.: 1 or 2 Module |
| 161 | 3 Module |
| 162 | 4 Module |
| 163 | 6 Module |
| 164 | 8 Module |
| 165 | Supplyingandfixingmodularblankingplate on the existing modular plate & switch box excluding modular plate as required. |
| 166 | Supplying and fixing call bell/buzzer suitable for single phase, 230 V, complete as required. |
| 167 | Installing of Exhaust Fan in existing opening, including and making good the connection, damage connection, testing commissioning etc as required. upto 450mm sweep |
| 168 | Extra for fitting of Lowers/shutters complete with frame for exhaust fan of all size. |
| 169 | Supplying and drawing of UTP 4 pair CAT 6 LAN Cable in the existing surface/ recessed Steel/ PVC conduit as required.: 1 run of cable |
| 170 | Supplying and fixing followingway, single pole and neutral, sheet steel, MCB distribution board, 240 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 8 way, Double door |
| 171 | Supplying and fixing following way, horizontal type three pole andneutral, sheet steel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar, interconnections, powder painted including earthing etc. as required. (But without MCB/RCCB/Isolator): 8 way (4 + 24), Double door |
| 172 | Supplying and fixing 5 A to 32 A rating, 240/415 V, 10kA, \"C\"curve, miniature circuit breaker suitable for inductive loadof following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.: Single pole |
| 173 | Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. |
| 174 | Supplying and fixing following rating, double pole, 240 V,isolatorin the existing MCB DB complete with connections, testing and commissioning etc. as required.: 63 A |
| 175 | Supplying and fixing following rating, four pole, 415 V, isolator in the existing MCB DB complete with connections, testing and commissioning etc. as required.: 40 A |
| 176 | 63 A |
| 177 | Supplying and fixing following rating, double pole, (single phase and neutral), 240 V, residual current circuit breaker (RCCB), havinga sensitivity current 30 mA in the existing MCB DB completewithconnections, testing and commissioning etc. as required.: 25 A |
| 178 | 40 A |
| 179 | 63 A |
| 180 | Supplying and erecting approved make panel mounting typeMultifunction Meter 0 to 750 AC Volts range erected on existingpanel board with all connection, wiring etc |
| 181 | Supplying and erecting approved make panel mounting typeDigital Voltmeter having 3 digits LED display, 0 to 750 AC Volts rangeerected on existingpanel board with all connection, wiring etc .with manufacturers calibration certificate. |
| 182 | Supplying and erecting Ammeter/ Voltmeterselector switch for 3 phase AC Supply 500 V on existing panel board with necessary connections. |
| 183 | Providing & erectingL.T. Current Transformer with bar primary 50/5 to 1000/5 ratio 15 VA burden erected in existing CRCA box duly secured with insulating materials connected to the meter |
| 184 | Supplying and erecting approved make suitable panel indicator lamps of LED type lamp, lens cover, Bakelite holder complete erected with necessary connections. |
| 185 | Providing and fixing following rating and breaking capaity and pole MCCB with thermomagnetic release and terminal spreaders in exiting cubicle panel board including drilling holes in cubical panel, making connections, etc. as required.: 100 A, 30KA, FPMCCB |
| 186 | 200 A, 36KA, FPMCCB |
| 187 | Providing & erecting weather proof, dust & vermin proof, floor mounted front operated indoor typecubical panel board necessary IP-42 and above protectionas per approval from engineer incharge made from 14 SWG thick CRC M.S. sheet for outer body & doors, 16 SWG thick CRC M.S.sheet for internal partitions with necessary accesories , supporting angles/ flats channel including cutting, bending, drilling, welding, riveting with internal partitions & cable alley as per requirements & instruction of engineer-in-charge with erection ofsupplied switch gears, BUSBARS,suitable size of inter connecting PVC copper wire / copper-aluminium strips, rubber grommets, rib, bakelite control fuses/MCB for measuringinstruments, earth bus & earth bolts, foundation flange - bolts-base Plates, sufficient nos. of hinged doors, handles with locking arrangement and rubber gasket,heavy duty end terminal connection,danger notice board,necessary ventilation,earthing stripcomplete. The Panel shall be painted with epoxy powder coating. (The rates excludes the cost of switchgears, bus bars, inter connecting mains & Copper Aluminium strips,meters, Fuses etc. The dimension shall be measured excluding base beams) The panel shall be supplied with following approved manufacturers with following size.(A) The standard companies switch gear shall be used and only manufacturers at CPRI approved factoryas per IEC 61439 for beneficial use. (i) with 350mm depth |
| 188 | Providing , erecting , fabricating the M.S. structure as per requirement on site incorporating proper size of M.S. angles,square,round, flats, bars, channels, sections complete with cutting, welding, grinding & finishing duly painted with one coat of red oxidewith erection on site as per direction of engineer in charge with necessary grouting, cementing, plastering & finishing complete. |
| 189 | Supplying and erecting triple pole & neutral 440V/ 500V panel mounting Aluminium Busbars with four equal Nos. of bus having current density not more than 0.8 Amp. / sq.mm (Rated current / cross section area) duly wrapped with colour insulating tape for phase sequence of following current carrying capacity, erected with necessary bus bar supports /insulators, main cable socket to each busbar,erected in existing cubical panel with necessary connections. (B) Suitable for 200 Amp. Capacity |
| 190 | Supplying and installing following size of perforatedHot Dipped Galvanised Iron cable tray (Galvanisation thickness not less than 50 microns) with perforation not more than 17.5%, in convenientsections,joinedwithconnectors,suspendedfrom the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.150 mm width X 50 mm depth X 1.6 mm thickness |
| 191 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 192 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"bends\" (galvanisation not lessthan 50microns)withperforation notmore than 17.5%, in convenientsections,joinedwithconnectors,suspendedfrom the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.: 150 mm width X 50 mm depth X 1.6 mm thickness |
| 193 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 194 | Supplying and installing following size of perforated Hot Dipped Galvanised Iron cable tray \"Tee\" (galvanisation not less than 50 microns) with perforation not more than 17.5%, in convenient sections, joined with connectors, suspended from the ceiling with G.I. suspenders including G.I. bolts & nuts, etc. as required.: 150 mm width X 50 mm depth X 1.6 mm thickness |
| 195 | 300 mm width X 50 mm depth X 1.6 mm thickness |
| 196 | Earthing with copper earth plate 600mm X 600mm X 3mm thickincluding accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe of 2.7 metre long etc. with charcoal/ coke and salt as required. |
| 197 | Supplying and laying 6 SWG G.I. wire at 0.50 metre below ground level for conductor earth electrode, including connection/ termination with GI thimble etc. as required. |
| 198 | Supplying and laying 25 mm X 5 mm copper strip at 0.50 metre below ground as strip earth electrode, including connection/ terminating with nut, bolt, spring, washer etc. as required. (Jointing shall be done by overlapping and with 2sets of brass nut bolt & spring washer spaced at 50mm) |
| 199 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed/ XLPE aluminium conductor cable of 1.1 KV grade as required.: 3 X 16 sq. mm (25mm) |
| 200 | 4 X 16 sq. mm (28mm) |
| 201 | Supplying and making outdoor end termination with cast resin compound including aluminium lugs and other jointing materials for followingsize of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.: 3 X 16 sq. mm |
| 202 | 4 X 16 sq. mm |
| 203 | Providing and erecting XLPE(IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables : (D) 3 1/2 core 95 Sq. mm ( 50 Sq. mm 1/2 core) |
| 204 | Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables: (c) 4 core 10 Sq. mm |
| 205 | Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables (d) 4 core 16 Sq. mm |
| 206 | Providing and erecting XLPE (IS:7098)(I)-88 ISI armoured cable multistrand Aluminium conductor for1.1 KV. to be laidon wall with necessary clamps or in existing trench/ pipe of following size of cables (C) 4 core 35 Sq. mm |
| 207 | \"Supply Installation Testing Commisioning ofIndoor deep Recessed Round downlight18-21W Recess Mounted Round backlit downlighter with below features 1. Pressure die cast Aluminum alloy housing for better thermal conductivity. 2. PS diffuser for optimum light transmission. Round Version.3. Efficacy of Fixture more then or equal to 85 Lumens /watt Available with 5700K, 4000K & 3000K CCT.4. CRI>80, High efficiencydriver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD 5. LED life of more then 35000 Hrs @ L70. Approved makes : Philips,Havells,Lighting technolgies, Wipro,Tisva |
| 208 | Supply Installation Testing Commisioning ofIndoor Office Lighting 2x2 Fixture 35-38w with below specifications1. Single Pressure die cast Aluminum alloy housing for better thermal conductivity and extremely low weight . 2. Efficacy of Fixture more then or equal to 85 Lumens /watt Available with 6500K,5700K, 4000K OR 3000K CCT.3. CRI>80, High efficiencydriver with inbuild surge protection, over voltage protection, short circuit protection and operating at >0.9 PF. <5% THD 4. LED life of more then 35000 Hrs @ L70. 5. Suitable for Grid and POP mounting .Approved Make.:WIPRO/TISVA/HAVELLS/LIGHTING TECHNOLOGIES/PHILIPS\" |
| 209 | Supplying and erecting LED indoor fittings with Integral, SMD LED, 40 W, IP65, 40W BATTEN LIGHT Surface t mounted totally enclosed LED luminaire with System efficacy of more than 100 lm/W (4000 lumens). LED luminaire shall be made up of Sturdy vandal resistantpolycarbonate body with polyurethane gasket. The luminaire shall have LED grade UV stabilized polycarbonate diffuser. The luminaire shall have Sturdy polycarbonate clips for fixing diffuser to housing. The luminaire shall have Waterproof cable gland ensuring good ingress protection. LM 80-08 compliant LEDs from reputed makes such as Nichia, Japan / Cree, USA / Bridgelux, USA / Lumiled USA / Citizen Japan / Everlite Taiwan / Osram Germany should be provided. LEDs used in the product shall comply with EN 62471 for Photo-biological safety and certificate for the same from manufacturer shall be provided. Luminaire manufacturer shall produce certificate of association with LED manufacturer for minimum five years. The LED shall be compliant with LM80-08 standard with Useful L70 life of 50000 Hrs tested at maximum current (Complete LM 80 test report for LED should be submitted for 10000 hrs of testing). The LEDs used should be with CCT of 5700 K and CRI of Minimum 80. LED Driver shall be CRCA constructed, Isolated type, Constant Current topology driver with proper heat sink for heat dissipation suitable to operate in input voltage range of 150V to 270V (nominal rated voltage – 240V) with 3 KV internal surge protection, Power factor greater than 0.95 and total harmonic distortion (THD) of less than 10% should be integral to the luminaire. Compliance to Indian Standards of IS10322 Part 5 / Sect 1:1967; 16105 : 2012; IS 16106 : 2012; IS 15885 (Part2/Sec13) : 2012; IS 16108 : 2012Ref : Philips make :Essential Smartbright IP65 Batten 40wApproved makes : Philips,Havells,Lighting technolgies, Wipro,Tisva |
| 210 | \"Supplying, Installation, testing & erectingof Indoor Linear Lighting 34W-38w 1200MM Suspended profile with below featuresExtuded Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. PS diffuser for optimum light transmission or opiton of Lens Based profile for better task lighting. Option to be selected by Architect / ConsultantEfficacy of Fixture 95 Lumens /wattAvailable with 5700K, 4000K & 3000K CCT. CRI>80High efficiency Mettalicdriver with inbuild surge protection, over voltage protection, short circuit protection and operating at>0.9 PF. <5% THDLED life of 50000 Hrs @ L70. IP20 ProtectionLuminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015.Approved makes : Philips,Havells,Lighting technolgies, Wipro,Tisva |
| 211 | \"Supply Installation Testing Commisioning of WATERPROOF IP65 cylinder Light 28W-32wSurface Mounted COB Spotlight downlighter with below featuresPressure die cast Aluminum alloy housing for better thermal conductivity. Powder coated using Nano technology for longer durability. Lens of 36-40 degree optimum light transmission. Efficacy of Fixture above 95 Lumens /wattAvailable with 5700K, 4000K & 3000K CCT. CRI>80High efficiencydriver with inbuild surge protection, over voltage protection, short circuit protection and operating at>0.9 PF. <5% THD. Tiltable. LED life of 50000 Hrs @ L70. The product should be Manufactured in India (all the Components should be manufactured in India except the Led source which can be imported . (Approved Led source Nichia , Cree, Lumileds , Osram Only)PF >=0.95 and THD <=5 % (Certificate need to be submitted from NABL Accredited lab)Approved makes : Philips,Havells,Lighting technolgies, Wipro,Tisva\" |
| 212 | Supply, installation, testing and commissioning of Providing following type of Modular Type Accessories mounted with pvc/ metallic box, single mounting base frame covered with textured/ metallic front plate, modules erected with necessary connection. As desired by Engineer In charge. Jack for Computer Open RJ-45 CAT III. |
| 213 | Providing & erecting Approved make Ceiling Fan with double ball bearing ISI mark with Condenser 230 volt A.C.50 Hz 1200 mm sweep complete having 3 blades aluminium body and blade sets having ornamental design shanks, canopy erected with earthing. [Make shall be approved by Engineer in Charge] |
| 214 | Providing 2.5mm.thick laminated acrylic sheet to cover the fan hook or Fan box. |
| 215 | Supplying and erecting 19 / 20 mm. nominal bore Medium Class M.S. Pipe down rod erected duly painted for fan complete with proper insulation without leakage and earthing. |
| 216 | Supplying & erectingfan hook box of10 mm M.S. round bar bounded to the RCC bars up to 50mm length each side and pierced through a16 Gauge M.S. box / Heavy Duty PVC box complete erected concealed in Ceiling with necessary finishing. |
| 217 | EXTERNAL ELECTRICAL WORKS |
| 218 | High Mast 20 Mtr. TOP A/F 150 Mm, BOTTOM A/F 400 Mm, No. of Sec. No. - 2, Bottom Thickness - 4 mm, Top Sec. - 3 mm, Size Base Plate -dia.580 mm x 20 mm thick, Foundation Bolt Size M27 x 850mm, Qty - 10 Nos., Suitable for mounting Fitting of Light - 12 Nos. |
| 219 | SITC OF Sports Flood light luminaire with system power 640w [640W ± 5%], Available in Cool White color temperature (5700K ± 355K),madeof a single piecePressurediecastaluminium (PDC)housing with separate driver and optical compartment for Thermal isolation & Powder coated by Corrosion resistant Nano coating technology. The fixture isprovided with a injection moulded UV stabilized Polycarbonate cover & Lens optics with beam angle options of 10°, 30°,60° & 100° beam angle for optimum light spread.Integral encapsulated high efficiency electronic driver having a Aluminium extrusion construction with rated voltage of 140-270V, power factor > 0.95, THD < 5%, IP66 protection, Inbuilt surge protection of 5 KV, has mis wiring, Over voltage, Short circuit, Reverse Polarity protection, Input over Voltage cut-offat 320V with Auto Recovery feature. Also upgraded with integrated IP67 protected SPD of 10KV/5KA surge protection & Line-Line 440VAC Withstand capacity up to 4Hrs.Luminaire has a Ingress protection of IP66 and Impact Resistance of IK08.The luminaire lumen output> 135 LPW & system efficacy of >27800 Lm , CRI of 70 . The LEDs used have a life of 50000 burninghrs Lumen maintenance as per L70.Suitable for Cradle mount application.Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab.Certification:CE Certified, ROHS compliant, BIS Certification for Luminaires & DriversLighting Technologies : Firmus 640w ( no of Modules and beam angle can be adjusted as per site situation)Or Equivalent in Osram-Traxon or Philips-Color Kinectics |
| 220 | SITC OF Sports Flood light luminaire with system power 220w [220W ± 5%], Available in Cool White color temperature (5700K ± 355K),madeof a single piecePressurediecastaluminium (PDC)housing with separate driver and optical compartment for Thermal isolation & Powder coated by Corrosion resistant Nano coating technology. The fixture isprovided with a injection moulded UV stabilized Polycarbonate cover & Lens optics with beam angle options of 10°, 30°,60° & 100° beam angle for optimum light spread.Integral encapsulated high efficiency electronic driver having a Aluminium extrusion construction with rated voltage of 140-270V, power factor > 0.95, THD < 5%, IP66 protection, Inbuilt surge protection of 5 KV, has mis wiring, Over voltage, Short circuit, Reverse Polarity protection, Input over Voltage cut-offat 320V with Auto Recovery feature. Also upgraded with integrated IP67 protected SPD of 10KV/5KA surge protection & Line-Line 440VAC Withstand capacity up to 4Hrs.Luminaire has a Ingress protection of IP66 and Impact Resistance of IK08.The luminaire lumen output> 135 LPW & system efficacy of >27800 Lm , CRI of 70 . The LEDs used have a life of 50000 burninghrs Lumen maintenance as per L70.Suitable for Cradle mount application.Luminaire performance & Safety :IEC 60598, IS 10322-5, IS 161-03/05/06/07, Surge : IEC 61000-4-5, EMC : EN 55015IES, LM 79, LM 80, & TTC certificates will be provided from NABL accredited lab.Certification:CE Certified, ROHS compliant, BIS Certification for Luminaires & DriversLighting Technologies : Firmus 220w ( no of Modules and beam angle can be adjusted as per site situation)Or Equivalent in Osram-Traxon or Philips-Color Kinectics |
| 221 | Supplying, Design, erecting, testing, commissioning approved make Hot dip galvanised studium High MastPole of 20 mtr with head frame,motorised trolley pole with 10-15 Each of light fitting facility includinglight fixtures installation as per following general specification. having following general Specification. (a)Section fabricated from G.I Plate confirms BSEN 10025 & Hot deep galvanised minimum 65/86 micron (as per IS 01461).(b) Maximum telescopic section not more than four (10.5,7.4, 1.0 mtr with overlaping in sequence is 1, 0.9 or 0.5 mtr) (c) Double drum gear pipe motorised winch with 6mm dia S.S. Rod (For 16 mtr and above size)(d) Approved make L.E.D. aviation light = 1 No. Lighting arrestor = 1 No. with necessary wiring of 2.5 sq.mm 5 core ISI copper cable Unarmoured. (e) Bottom most section suitable for mounting reversible motor and switchgears having door not more than 1400mm x 300mm withwaterproof gasket & hinges & locking arrangement. (f) Pole structure comprises suitable size of reversible motor, cable and necessary switchgears. (g) bottom section shall have suitable size of thickness supports ribs foundation bolts nuts etc.(h) Item notcomprises the cost of lanterns.(i) Necessary Cement Concrete foundation as per IS including testing & commissioning of the entire structure for following size of High Mast poles [CAT.II] [A] High Mast 30 Mtr. With Head Frame, TOP A/F 490 MM, BOTTOM A/F 1090 MM, Sec. No. , Bottom Thickness -8 mm, Middle Base Sec mm - 6, Top Sec. - 5 mm, Round Size Base Plate - 1310 Dia x 35 MM, Foundation Bolt Size M32 x 1500, Qty - 20 Nos- 36mm Dia., Dia. may vary ± 5 % , Suitable for mounting Fitting of Light - 10-15 Nos. |
| 222 | SITC OF 09METRE POLE SUITABLE FOR MOUNTING 2-4 PCS OF 220W SPORTS FLOOD LIGHT WITH SUITABLE LADDER ARRANGEMENT FOR MAINTAINANCE PURPOSEPole structure comprises suitable size of cable and necessary switchgears.bottom section shall have suitable size of thickness supports ribs foundation bolts nuts etc.Item not comprises the cost of lanterns. Necessary Cement Concrete foundation as per IS including testing &commissioning of the entire structure for following size of High Mast poles [CAT.II] |
| 223 | Supplying, Installation, testing & erectingof High end 20WSpike Light with Following specifications .1. Housing made of pressure die cast aluminium alloy with corrosion resistance powder coating .Should have both the option of spike as well as fixed base stand for surface mounted option.2. Specially formulated UV Stabilised Injection molded PC diffuser for high Caliber light transmission, Minimal Glare and Maximum Output.3. Min IP I66 to ensure fixture is water and dust tight .4. External separate Silicon encapsulated mettalicisolated driver for ensuring better reliability and safety. 10KV/5KVA external surge arrestor.6. Fixture should be warrantied for 5 yrs for 50,000 hrs @ L70 7.The product should be Manufactured in India (all the Components should be manufactured in India except the Led source which can be imported . (Approved Led source Nichia , Cree, Lumileds , Osram Only)8. PF >=0.95 and THD <=15 % (Certificate need to be submitted from NABL Accredited lab)9. The manufacturer should be ISO 9001 -2008 and ISO 14001 -2004 Company10. Have their own driver Manufacturing Facility.11. Have their own NABL accredited lab12. Fixture should be offered in ebony black color . Light Colors 5700deg K, 4000 deg K, 3000 deg K , light beam angles , 10 deg , 30 deg and 40 deg.Lighting Technologies : Projector Mid 20W Mono Color, Or Equivalent in Osram-Traxon or Philips-Color Kinectics |
| 224 | Supplying, Installation, testing & erectingof High end Linear Wall Washer 40w 1.2m with Following specifications .(3000/4000/5700k deg )1. Housing made of pressure extruded aluminium housing with corrosion resistance powder coating .2. Specially formulated toughned glass cover.3. Min IP I66 to ensure fixture is water and dust tight .4. External separate Silicon encapsulated mettalicisolated driver for ensuring better reliability and safety. 10KV/5KVA external surge arrestor.6. Fixture should be warrantied for 3yrs for 50,000 hrs @ L70 7.The product should be Manufactured in India (all the Components should be manufactured in India except the Led source which can be imported . (Approved Led source Nichia , Cree, Lumileds , Osram Only)8. PF >=0.95 and THD <=15 % (Certificate need to be submitted from NABL Accredited lab)9. The manufacturer should be ISO 9001 -2008 and ISO 14001 -2004 Company10. Have their own driver Manufacturing Facility.11. Have their own NABL accredited lab12. Fixture should be offered in ebony black color . Light Colors 5700deg K, 4000 deg K, 3000 deg K , light beam angles , 10 deg , 30 deg and 40 deg.Lighting Technologies : Linear Wall Washer 40w 1200mm Warm White .The Fixture Shall wall / Surface mounted. ( L04030F030 ) Or Equivalent in Osram-Traxon or Philips-Color Kinectics |
| 225 | Supplying and erecting approved make Conical Pole (Standard ) Made from HR sheet steel. The pole should be made as per IS. and shall be coated with hot dip galvanizing as per IS 2629/2633/4759 with required base plate and integral Junction box consist of terminal plate of min 6mm Hylam sheet, standard profile 35mmX7.5mm Din-Rail for MCB Mounting, stud type terminal and arrangement for cable terminationas erected on suitable foundation (included) with necessary nut-bolts/J-Bolts.as per details given by manufacturer considering site requirement.The length of poles are as below. (G) 9 Mtr. Long65mm Top X200 mm bottom dia, 3mm thickness. |
| 226 | Providing1:2:4 cement concrete foundation & 70 % PCC from bottom including excavation for the pole of size 60 x 60 x 150 cm. Deep in below ground level with plinth of 45 cm x 45 cm(or 45 cm dia x 45 cm) high upper ground levelwith necessary curing and finishing in approved manner.(for 9 & 10mtr pole) |
| 227 | Supplying & erectingapproved make SMC press moulded composite FRP. loop-in, loop-out approx. 2mm thick box complete with Bakelite connector strip 5way(3P+N+E),DIN rail for mounting mob& hinged doors as per requirement having locking arrangements with mounting clamp with nuts, bolts & washers suitable for erection on pole with cable clamps& earth bolt of following size of box. (a) 300mm x 200mm x 100mm[deep] |
| 228 | Supplying and erecting B class Galvanized iron pipe having smooth finished bore of the pipe on both ends erected nuts and boltsalong the pole/ wall shaping the pipe as per site requirement. Pipe dia as following. |
| 229 | Providing and erecting iron clad cable route marker duly marked with ELE.CABLE of size 23 cm.X 12 cm. Flushed with ground in cement foundation as directed by Engineer in charge. |
| 230 | Providing & laying. R.C.C. Hume pipe for cable to be laid 90 cm. below ground across the road crossing or on floor with necessary material in an approved manner and making the ground as per original.(D) 300 mm dia |
| 231 | Providing & laying approved make Double walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground/ road surface for enclosing cable (A)50 mm outer dia |
| 232 | Providing & laying approved makeDouble walled corrugated pipes (DWC) of polyethylene(conforming to IS 14930 II )with necessary connecting accessories of same material at required depth in existing trench for laying of cable. below ground/ road surface for enclosing cable (B)63 mm outer dia |
| 233 | Plumbing work |
| 234 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc.: 15 mm nominal dia Pipes |
| 235 | 20 mm nominal dia Pipes |
| 236 | 25 mm nominal dia Pipes |
| 237 | 32 mm nominal dia Pipes |
| 238 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall:40 mm nominal dia Pipes |
| 239 | 50 mm nominal dia Pipes |
| 240 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings This includes jointing of pipes & fittings with one step CPVC solvent cement, trenching, refilling & testing of joints complete as per direction of Engineer in Charge. External work: 65 mm nominal dia Pipes |
| 241 | 80 mm nominal dia Pipes |
| 242 | Providing and fixing gun metal gate valve with C.I. wheel of approved quality (screwed end) : 32 mm nominal bore |
| 243 | 40 mm nominal bore |
| 244 | 50 mm nominal bore |
| 245 | 65 mm nominal bore |
| 246 | Constructing masonry Chamber 60x60x75 cm, inside in brick work in cement mortar 1:4 (1 cement : 4 coarse sand) for fire hydrants, with C.I. surface box 350x350 mm top and 165 mm deep ( inside) with chained lid and RCC top slab 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) , i/c necessary excavation, foundation concrete 1:5:10 (1 cement : 5 fine sand:10 graded stone aggregate 40 mm nominal size) and inside plastering with cement mortar 1:3 (1 cement : 3 coarse sand) 12 mm thick, finished with a floating coat of neat cement complete as per standard design : With common burnt clay F.P.S.(non modular) bricks of class designation 7.5 |
| 247 | HYDRO PNEUMATIC SYSTEM FOR DOMESTIC WATER DISTRIBUTIONVariable Speed Hydro-booster System : Compact self contained Hydro-booster system comprising of following : In-line, vertical multistage, centrifugal clear water pumps with SS-304 casing, S.S 304 impellerandSS-304shaft,C.I.BaseCEDcoating&headTEFCmotor(with mechanical seal) Vendor to submit performance curves and technical catalogue of the proposed model for review and information. The job shall include required size of Foot valve, Inlet Pipe, Outlet Pipe, Y Strainer, NRV,Inlet & Outlet Valves, Main Header Header, Pressure Valve,and all required accessories to complete the job.Panel mounted PLC based multi pump controller with large graphical display with VGA 240 x 320 pixels and variable frequency drive (VFD) integrated in a single body or as separate components with pressure sensor transmitter, IP 55 enclosure, diodes to indicatepumpready,pumprunningandfaultcondition.Eachincomerand Outgoing feeder should be capable for protection against Overload, Short Circuit and Phase reversal condition. System should be capable to compensate for frictional losses at lower flows. All alarms should be displayed in the controller. System should be equipped with dry running protection. Indication of all type of faults / on-off status. Electronic type low water level controller with LED panel to operate pump (necessary contactsalongwithminimumonePLCoperatedsparecontactsrequired),with probe & all control wiring from Panel to tank to operate the system automatic/manual & shall prevent the pump from dry running.Scope shall also include power and control cable of required size, termination, cable tray from Pump to Control panel etc. complete the job.Pre-charged diaphragm pressure vessel with interchangeable membrane, charging connection, connected to outlet header with necessary flanges, gaskets, isolating valves, nuts/bolts etc. complete (size of pressure vessel shall be as per manufacturer recommendation).Setof accessoriessuch as GIheaders of suction and discharge for (working and standbypumpassembly),controlvalves,nonreturnvalves,pressureswitches, pressure transducers, pressure gauge etc. complete the job.Domestic Water Supply Distribution PUMP:Capacity per pump- 150 LPM1 Set= 1 Nos. Pump (1 Working + 1 Standby - cascade operation)Total Capacity of System: 300 LPMHead - 40 mtLocation- Pump RoomSuction head- Negative Suction |
| 248 | 100 mm S.C.I. trap with 100 mm inlet and 75 mm outlet |
| 249 | 100 mm S.C.I. trap with 100 mm inlet and 100 mm outlet |
| 250 | S.C.I. gully or nahani grating 100 mm dia |
| 251 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete.: Semi rigid pipe: 40mm dia |
| 252 | Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure poluthene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(G)110 mm |
| 253 | Providing and fixing to wall ceiling and floor 10.0 Kg. F/Cm2 working pressure polythene pipes of the following outside Dia. Low densidy, complete with special falnge compression type fittings, wall clipsetc. including making good the wall ceiling and floor.(F) 75mm |
| 254 | Providing and fixing M.S. holder-bat clamps of approved design to Sand Cast iron/cast iron (spun) pipe embedded in and including cement concrete blocks 10x10x10 cm of 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size), including cost of cutting holes and making good the walls etc. : 75 mm dia |
| 255 | 100 mm dia |
| 256 | Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 150mm |
| 257 | Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 200mm |
| 258 | Providing & Supplying of Class SN8 structured wall Polythelene piping systems (Pipe with online/offline coupler and elastomeric sealing ring) with non-smooth External Annular corrugated and smooth internal surfaces (Double Wall) for non pressure underground Sewerage & Drainage application as per EN:13476-3 incuding all local and central taxes, transportation, freight charges, octroi, inspection charges, loading, unloading, conveyance to the departmental stores etc. complete (ID Dia). Pipe Dia. ID 250mm |
| 259 | Providing and laying cement concrete 1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40 mm nominal size) up tohaunches of S.W. pipes including bed concrete as per standard design : 150 mm diameter S.W. pipe |
| 260 | 200 mm diameter S.W. pipe |
| 261 | 250 mm diameter S.W. pipe |
| 262 | Providing and fixing square-mouth S.W. gully trap class SP-1 complete with C.I. grating brick masonry chamber with water tight C.I. cover with frame of 300 x300 mm size (inside) the weight of cover to be not less than 4.50 kg and frame to be not less than 2.70 kg as per standard design: 180x150 mm size P type: With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 263 | Constructing brick masonry manhole in cement mortar 1:4 ( 1 cement : 4 coarse sand ) with R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 coarse sand (zone-III) : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:4:8 mix (1 cement : 4 coarse sand (zone-III) : 8 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with floating coat of neat cement and making channels in cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) finished with a floating coat of neat cement complete as per standard design : Inside size 90x80 cm and 45 cm deep including C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover and frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 264 | Inside size 120x90 cm and 90 cm deep including C.I. cover with frame (medium duty) 500 mm internal diameter, total weight of cover and frame to be not less than 116 kg (weight of cover 58 kg and weight of frame 58 kg) : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 265 | Constructing brick masonry chamber for underground C.I. inspection chamber and bends with bricks in cement mortar 1:4 (1 cement : 4 coarse sand) C.I. cover with frame (light duty) 455x610 mm internal dimensions, total weight of cover with frame to be not less than 38 kg (weight of cover 23 kg and weight of frame 15 kg), R.C.C. top slab with 1:1.5:3 mix (1 cement : 1.5 fine sand : 3 graded stone aggregate 20 mm nominal size), foundation concrete 1:5:10 (1 cement : 5 fine sand : 10 graded stone aggregate 40 mm nominal size), inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand), finished smooth with a floating coat of neat cement on walls and bed concrete etc. complete as per standard design: Inside dimensions 455x610 mm and 45 cm deep for single pipe line : With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 266 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. With common burnt clay F.P.S. (non modular) bricks of class designation 7.5 |
| 267 | SPRINKLER IRRIGATION SYSTEM |
| 268 | Piping Network Providing of PVC pipes (IS:4985- 88), and fittings & Accessories like tees, elbows, bends, junctions, Reducers etc; inclusive of PVC fittings & Accessories as required/directed at site , Make: Finolex, Supreme, Astral. a) PVC Pipe 75mm 10kg/cm2 |
| 269 | b) PVC Pipe 63mm 06kg/cm2 |
| 270 | c) PVC Pipe 50mm 06kg/cm2 |
| 271 | d) PVC Pipe 40mm 06kg/cm2 |
| 272 | Providing of Gear driven Pop-up Sprinkler (5004) 4\" (4\" Pop Up hight from Bottom to Centre of Discharging Nozzle) from (9.0 to 14.0 Mtr Radius) with Check Valve, Inbuilt pressure regulator & on off feature from top, Slip Clutch Mechanism complete with required nozzleMake : Rain Bird/ Toro/ Nelson |
| 273 | Providing of Swing Joint 3/4\" with PP Clamp Saddle Chromed Nut Bolt & Nitrile Rubber Gasket Make: RainBird/Toro/Astore |
| 274 | Valves: Providing of Various Valves with required Fittings & Tapping PP Clamp Saddles with Chromed Nut Bolt & Nitrile Rubber Ring. PVC Ball Valve 63mm PN 16Make: GF / FIL / ASTORE |
| 275 | PVC Ball Valve 50mm PN 16Make: GF / FIL / ASTORE |
| 276 | PVC Flush Valve 40mmMake: Netafim/Finolex/Jain |
| 277 | 3/4\" Quick Couppling Valve - Rainbird |
| 278 | 3/4\" Quick Couppling Valve Key - Rainbird |
| 279 | 3/4\" Gunmetal Gate Valve |
| 280 | PP Saddle Tee 63mmX3/4\" witth ASTM Pipe (12\" Long) |
| 281 | Swivel Elbow 3/4\" X 3/4\" - Rainbird |
| 282 | 1\" Double Acting Air cum Vacum Release Valve Make: Bermad/ARI/Plasson with GM valve 1\" Make: NIBCO/Zoloto |
| 283 | Rectangular Valve Box 12\"Make: Carson Brooks/Rain Bird |
| 284 | Round Valve Box 10\" Make: Carson Brooks/Rain Bird |
| 285 | Round Valve Box 6\" Make: Carson Brooks/Rain Bird |
| 286 | 2\" Hydro Meter - Water Meter cum Master Valve - Bermad Israel |
| 287 | Automation Providing Automation Items for Irrigation with all its required accessories.18 Station Irrigation Controller |
| 288 | 2\" Solenoid Valve - BSP Female Threaded, Pressure - 1 to 10 Bar Make: Toro/Rain-Bird/Bermad |
| 289 | 1-1/2\" Solenoid Valve-BSP Female Threaded, Pressure-1 to 10 Bar Make: Toro/Rain-Bird/Bermad |
| 290 | Direct Burrial Irrigation Cable 18 AWG (Live wire) |
| 291 | Direct Burrial Irrigation Cable 18 AWG (Common wire) |
| 292 | Pressure Reducing Valve 2\"Make: Bermad/Rain Bird/Netafim |
| 293 | Weather Prrof Cable Connection DBY Make : 3M / Rain Bird |
| 294 | Votage Stabilizer0.5 Kva |
| 295 | PVC Pipe 32mm 8kg / Maxi Cable Conduit |
| 296 | Pump Station: Providing, of Pump Station giving flow of 3.70 lps at 45 m head,complete Set (1 working + 1 stand By) with Pressure Tank, Panel & all required accessories. Make: Grundfos/ITT/Lubi |
| 297 | Pressure Relief Valve 2\" - Hydraulic Type, Diapharm based |
| 298 | Fertigation Pump - Hydraulic Type - MaximumFlow 200 LPH |
| 299 | Exacavating, Laying, Joiting & Commissioning PVC Pipes from 75mm OD to 25mm OD, Trench Size minimum 600mm Deep for Main Lines, 300mm to 450mm Deep for Submain ines, Backfilling with compaction and removing excess soil up to 50m Lead from site. Includes Installation & Commissioing of all Irrigation hardwares like Sprinklers, Dripper, Drip Lines, Valves, Saddles, Swing Joints, Valve Boxes, Filter Unit & Automation Items Complete as per drawing, specifications, instruction & directions of the Engineer-in-charge. |
| 300 | ELV SYSTEM |
| 301 | Supplying, installation, testing & commissioning of smoke detector with builtin LED and mounting base complete with all connections etc. as required. |
| 302 | Supplying, installation, testing & commissioning of manual call box of ABS type in surface/recess with stainless steel chain & hammer assembly complete with glass and push button etc. as required. |
| 303 | Supplying, installation, testing & commissioning response indicator on surface/recessMS box having two LEDs metallic cover complete with all connections etc. as required. |
| 304 | Supplying, installation, testing & commissioning fire alarm sounder with facility to make announcement, mounted in A.B.S. box with hinged cover plate & suitable for operation with amplifier i/c line matching transformer etc. complete as required. |
| 305 | Supplying, installation, testing & commissioning talk back slave station in surface/recess suitable for operation on simplex mode complete with P.T.T. knob & speaker/microphone enclosed in a M.S.(16 SWG)/ ABS box with break glass in front etc. complete as required. |
| 306 | Supplying, installation, testing & commissioning sector panel suitable for following zones, complete with visual indications for short circuit fault, open circuit fault, fire condition and all other standardfacilities as per IS:2189 with mimic diagram for all area/zone covered, complete with all connections, interconnections as required.4 Zone |
| 307 | Supplying & laying of 2x1.5 sqmm fire alarm armoured cable, 600/1000V rated with annealed copper conductor having XLPE insulation, steel wire armouring & FRLS outer sheath complete as required. |
| 308 | Supply and installation of DLP projector - 4000 ANSI lumens, 1024X768 pixels, contrast ratio - 2500:1, XGA Either table top or ceiling mounted |
| 309 | supply and installation of projector Screen (150\" Diagonal) with black border and tubular motor driving device with less noise, smooth function and remote control |
| 310 | Supply and installation of VGA Cable (Factory Crimp) |
| 311 | Supply and installation of HDMI Cable (Factory crimp) |
| 312 | DOME CAMERA-Full HD 1080p 25/30 fps image with a 1/2.7\" or 1/2.8\" 2 MP sensor,2.7–12 mm, F1.4,zoom lens,True WDR up to 140 dB ensures glare-free images,H.264 and MJPEG codec, triple stream support, IR LEDs provide up to 50 m (150’) of illumination in dimly lit or nighttime scenes, Waterproof (IP67) and IK10 vandal resistant camera housing ,ONVIF Profile S and G compliant |
| 313 | Network Video Recorder: Supply, Installation, Testing and Commissioning of IP survellance solution central management 1080P with minimum 16 Channel NVR 8 SATA HDD with 5 Client License, with required slots numbers of Hard Disk (4 TB SURVILANCE GRADE HDD) and slots to carry out 30Days backup. Recording speed at 25/30FPS. |
| 314 | Supply, Installation, Testing and commissioning of 1 TB Surveillanceseries Hard disk |
| 315 | Supply, installation, testing and commissioning of CAT6A UTP patch cord-1m |
| 316 | Supply, installation, testing and commissioningof 24 Port CAT6A UTP Jack panel with Cable Manager |
| 317 | Supply, installation, testing and commissioning of L3 Network Switch with24 port 10/100/1000 Mbps switch with 2 Gigabit combo slots(RJ45/SFP) |
| 318 | Supplying and erecting approved make online 7.5 KVA Un-interruptible Power Supply system comprising flat cum-boost charger, static Inverter & sealed maintenance free batteries. The charger having operating capacity for input 415V AC & inverter having output23OV,5O Hz Acwith 0.8 load power factor with battery, over under voltage output with over load & short circuit protection equipment. |
| 319 | Supplying and erecting approved make Batteries for UPShaving18 Nos. of 12 V 42 Ah SMF batteries.Cat : III & As per approved Make List. With Battery Racks, InterLinks and Other extra Accessories. Type: SMF & VRLA . |
| 320 | SITC Of 40 Inch Full HD LED TV as per tender specification. |
| 321 | Supply, installation, testing and commissioning of CAT6A UTP patch cord-2m |
| 322 | Supply, installation, testing and commissioning of 9 U Rackincluding necessary power mounting and fan arrangements for mountingCCTV equipments |
| 323 | Wi-Fi System :Supply, Installation, testing & commisioning of Wire less WiFi Router with below specification Networking Interface : (1) 10/100 Ethernet Port Buttons : Reset Antennas, Power Method : Passive Power over Ethernet (12-24V) Power Supply: Included 24V, 0.5A PoE AdapterMaximum Power Consumption : 6 W Maximum TX Power : 27 dBm BSSID : Up to Four Per Radio Power Save : Supported Wireless Security : WEP, WPA-PSK, WPA-TKIP, WPA2 AES. |
| 324 | Deductfornotgroutingthejointswithwhitecementandmatchingpigmentin the items of fixing of vitrified tiles. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
