Annual Rate Of Miscellaneous Civil Work Tender In Ward No. 1 To 7 Various Areas At Nagarpalika Dhanera Grant : Municipal Fund 2025 -26=-1.0 1.00 Scarifying gravelled macadam or bitumen macadam surface 6cm to 10cm depth including stacking useful materials on road side and disposing off reremaining stuff 2.0 1.00 Demolition and disposal of unserviceable materials with all lead and lift.(i) Lime concrete. 3.0 1.00 Demolition including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift 1. R.C.C. workand lift 4.0 1.00 Demolition of brick work and stone masonry including stacking of serviceable materials and disposal of unserviceable materials with all lead and lift 1. In Cement Mortar 5.0 1.00 Box cutting the road surface to proper slope and camber for making a base of road work including removing the excavated stuff and depositing on the road side slope as directed up to 50mts. Lead 6.0 1.00 Earth work for embankment including breaking clods ,dressing with all lead and lift ( excluding watering & consolidation) ( D) From Borrow area within 2.00 Km Lead. 7.0 1.00 Watering of earth work as directed 8.0 1.00 Rolling of earth wor in layers with power roller including filling in depressions which occur during the process (up to 10 ton) 9.0 1.00 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm. In depth consolidating each deposited layer by ramming and watering. 10.0 1.00 Providing hard side shoulder of 100 mm thick for embankment using quarry spall with all lead and lift and including watering and rolling and consolidation of sub grade in layers at OMC to required dry density inclding filling depression which occur during the process using vibratory roller of 80 KN to 100 KN 11.0 1.00 Providing and laying W.B.M of B.T.M.C metal of size 45mm to 63mm size including 20% Gritt (Stone scrinning) & stone dust as filler including spreading watering & consolidation by vibratory roller 80KN to 100KN static weight. 12.0 1.00 Providing & laying cement concrete 1:4:8( 1: cement 4 :coarse sand 8 : Crushed Stone Aggregates 40mm nominal size ) and curing complete exculding cost of form work in (a) Foundation and Plinth 13.0 1.00 Providing and casting in situ ordinary cement concrete M200 for CC wearing coat including compaction and finishing by trimix process including and filling in joints with bitumen etc complete as directed by Engineer in Charge 14.0 1.00 Construction of granular sub-base by providing close graded material, spreading in uniform layers with motor grader on prepared surface, mixing mix in place method with rotavator at OMC, and compacting with vibratory roller to achieve the desired density, complete as per caluse 401 (Table:-400 - 1) Gradig : II 15.0 1.00 Providing,laying,spreading and compacting graded stone aggregate to wet mix macadam spcification including premixing the Material with water at OMC in mechanical mix plant carriage of mixed Material by tipper to side laying in uniform layers with paver in sub base / base course on well prepared surface and comacting with vibratory roller to achieve the desired 16.0 1.00 Providing and laying 50 mm thick bituminous macadam with B.T. Aggregates as per M.O.R.T.& H gradation and Asphalt @ 2.50 Kg / 10 Sq mt for tack coat on BT surfae, asphalt grade VG-30 {60/70} for mixing @ 34.00 Kg. / M.T. i.e. 3.40% by total weight including heating the aggregates and asphalt by continuous batching of drum mix plant and spreading the same by paver finisher and consolidation with vibratory roller 80 to 100 KN static weight including providing all materials, equipments, tools and plant, oil, kerosene, firewood, labour charges etc. comp. using contractors own machineries, drum mix plant and paver finisher etc. complete. 17.0 1.00 Providing and laying 25 mm thick (Compacted) Semi -dence Bituminous concrete on exiting bitumious surface and using specified graded black trapped amchine crushed aggregates with 5% Bitumen VG-30 grade bitumen buy Wt of total mix as per MORTH specification including heating and mixing of asphalt with B.T Chips in continuous bach mix plant and transfporting same at site and speading by sensor paver finisher and consolidation the same with pair of 8 tonnes to 10 tonnes vibratory roller to achive desire density and including flusing the stone dust @ 0.03 Cu.M/10 Sq.Mt including cost of required tolls plants, all machineries, equipment fire wood oil, kerosene, charges etc complete 18.0 1.00 Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface (providing and laying of hot applied thermoplastic compound 2.5 mm thick including reflectorising glass beads @250 gmspersqmarea, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35. The finished surface to be level, uniform and free from streak sandholes), including providing and painting zebra crossing, speedbreakers, rumbles trips, arrows, dash, any other signor laters etc. as per direction of Engineer In-charge. 19.0 1.00 Box cutting the road surface to proper slope and camber for making a base of road work including removing the excavated stuff and depositing on the road side slope as directed up 50mts. Lead 20.0 1.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 60mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. 21.0 1.00 Providing and fixing pre-cast Rubber Dye / steel Dye inter locking concrete block 80mm thick with grade of concrete M300 pnumatic compressed / vibrated mechanically and as per approved design Confirming to IS 15658 : 2006 including 35 mm Sand layer for levelling and filling the joint with sand in proper line and level as per guidlines of IRC : SP 63-2018 etc. Complete. 22.0 1.00 Providing and fixing pre-cast concrete kerb stone of gray cement based concrete block 30cm length,30cm height and 15cm thick of M200 grade concret as per approved design and including excavation for fixing in proper line and level,filling the joint with C:M 1:3 (1cement:3fine sand) etc complete. 23.0 1.00 Providing & fixing precast C.C Kerb drain Block of L shape of size 0.30 . X 0.45 m in CC M200 on edge of pavment require line and level including fixing & filling the joints in C. 1:3 as per drawing and painting with road marking paint etc complete as directed . 24.0 1.00 Removing & Refixing of Paver block with providing sand bedding of 75mm beneath the paver block including stacking paver blocks untill reuse & disposal broken witk all lead and lift. 25.0 1.00 Excavation for foundation up to 1.50M. Depth including sorting out and stacking of useful materials and disposing of excavated stuff up to 50M lead . 26.0 1.00 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./Sq.cm.. In foundation and plinth in cement mortar 1:6 (1cement : 6 fine sand) (b) Conventional 27.0 1.00 Brick work using common burnt clay building bricks having crushing strength not less than 35 Kg./Sq.cm.. In super structure above plinth level up to floor two level in cement mortar 1: (1cement : 6 fine sand) (b) Conventional 28.0 1.00 Half brick masonary in common burnt clay building bricks having crushing strength not less than 35Kg/Sq.Cm in cement mortar 1:4 (1:Cement 4: coarse sand ) In super structure above plinth level up to floor two level(b) Conventional 29.0 1.00 Providing T.M.T bar FE 500D reinforcement for R.C.C work including bending ,binding and placing in position complete up floor two level. 30.0 1.00 Providing and laying ordinary cement concrete M 200 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in Foundation FOOTING 31.0 1.00 Providing and laying ordinary cement concrete M 200 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in COPPING 32.0 1.00 Providing and laying ordinary cement concrete M 200 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in COLUMN 33.0 1.00 Providing and laying ordinary cement concrete M 200 and curing complete including the cost of formwork but excluding the cost of reinforcement for reinforced concrete work in PLINTH BEAM/SEAL BAND 34.0 1.00 Removing and scraping of old deteriorated plaster of any thickness fromm wall / R.C.C member including stacking of serviceable material and disposal of unserviceable from site work with all lead and lift 35.0 1.00 Cement Plaster (20 mm thick) A) Cement plaster 20 mm thick in C.M. 1:2 using water proofing compound of approved quality including finishing etc. complete. 36.0 1.00 Providing 10mm thick cement plaster in single coat on brick/concrete walls for interior plastering upto floor two level and finished even and smooth in (i)Cement mortar 1:3 cement:3-sand) 37.0 1.00 Distempeing (Two coats) with oil bound distemper of approved brand and manufacture and of required shade on wall surfaces to give an even shade, over and including a priming coat with distemper primer of approved brand and manufacture after thoroughly brushing the surface free from mortar dropping and other foreign matter and also including preparing the surface even and sand papered smooth. 38.0 1.00 3Layer Coating of K2 smart coat on china Mosaic including labour & material as per directed engineer inchage 39.0 1.00 Providing 15 mm. Thick cement plaster in single coat on Rough (Similar) side of single or half brick walls for interior plastering upto floor two level and finished even and smooth in :(I) Cement mortar 1:3 (1 cement : 3 sand) including a priming coat of whiting after thoroughly brooming the surface free from mortar dropping and other foreign matter with two coats distempering etc as per directed. 40.0 1.00 Providing 20 mm thick double coat mala cement plaster on interior brick / concrete work for plastering comprising of base coat of 12 mm thick cement plaster in cement mortar (1 cement 4 coarse sand) in rough finishing and 8 mm thick top coat cement mortar 1:2 (1 Cement : 2 Coarse sand) finished with trovel including scaffolding curing etc. complete including priming coat of whiting after thoroughly brooming the surface free from mortar dropping and other foreign matter with two coats water proof cement etc as per directed. 41.0 1.00 Applying two coats of putty & two coats of primer of approved brand and manufacture on new wall surface to give an even shade including thoroughly brushing the surface free from mortar dropping and other foreign matter and sand papered smooth. 42.0 1.00 Pro. And fixing single layer water proof gypsum board 12.5 mm thick sections using water proof board of size 1220 mm x 1830 mm x 8.0 mm suspended by GI suspender channel of size 25 mm x 3 mm with intermediate channel og size 18 mm x 40 mm x 0.8 mm at 1220 mm center to center ceiling section of size 40 mm x 35 mm x 0.55 mm at 457 mm c/c and perimeter channel A of size 20 mm x 27 mm x 30 mm x 0.5 mm at edges & drops incl.paper tap sand sofit cleat, anchor fastener, scoch bolt connecting cleat,joining compound top coat on ceiling incl.making necy.opening for light fitting,diffuser etc. comp. as per detail drawing as directed 43.0 1.00 Providing & fixing M.S. grills of required pattern to wooden frames of windows etc. with M.S. flats at required spacing and frame all-round square or round bars with round headed bolts and nuts or by screws. (a) Plain Grill 44.0 1.00 Providing and casting in situ ordinary cement concrete M. 150 mix and providing necessary pin headers including shuttering scaffolding laying vibrating curing and finishing complete without V-Grooves. (A) Height from 0.0 M to 5.0 M Cement differance (290-220=70 x 5.234 = 366.38+3362.12 = 3728.50 45.0 Supplying and fixing reinforced concrete heavy duty non - pressure pipes with collars for culverts carrying heavy traffic as per IS 458-1991 specification including setting the pipes in cm . 1:2 watering and laying (to level or slops) of Class NP3 of following internal Diameters 45.1 1.00 300 mm Dia 45.2 1.00 450 mm Dia 45.3 1.00 600 mm Dia 45.4 1.00 750 mm Dia 45.5 1.00 900 mm Dia 46.0 1.00 Providing and fixing 1.20 Metre high fencing with 2.0 Metre long M.S. Angle posts 40mm x 40 mm x6 mm and oil painting 3 coats fixed at 2.5 Mt,C/c. with five Horizontan lines and two diagonals of galvanised steel barbed wire weighting 9.38 Kg. per 100 Metre, strained and fixed to posts with G.I,staples including fixing the postsin ground with 0.5 M x 0.5.M x 0.5 M. block in C.C1:5:10 etc 47.0 1.00 Providing and laying cement concrete work 1:1.5:3(1-Cement : 1.5 - Coarse sand :3- graded stone aggregates 20 mmnominal size) and curing complete excluding cost of form work and reinforcement for reinforced concrete work in (K) Vertical and Horizontial its up to floor two level. 48.0 1.00 Providing form work of ordinary timber planking so as togive a rough finish including centering Shuttering strtting and propping etc. Ht. of propping and centering below supporting floor to ceilling ex- exceeding 4M.and removal of the same for in situ reinforced concrete and plain concrete work in ( C) Vertical Surfaces such as walls (any thicknes) partition and the likeincluding attached buttresses & string course & the like 49.0 1.00 Providing and laying cement concrete 1:2:4 (1:Cement 2:coarse sand 4: graded stone aggregates 20mm nominal size) and curing complete excluding cost of form work in (a) Foundation and Plinth 50.0 1.00 Providing & laying China Mozec Bankada of 51 length and 34 wide including seat conditions for construction of china Mozec Bankada are as under. 1. Providing 3 dia mild steel reinforcement of government approved quality for RCC work including bending, binding and placing in 3 center to center distance 2. Providing and laying cement concrete 1:2:4 (1:cement 2:coarse sand 4: draded stone aggregate 20 mm nominal size) and curing complete including cost of form work and reinforcement gov. approved materials is used in C.C 1:2:4 . 3. Providing and laying Takati of 24 x 10 of Govt.approved quality i C.M 1:3. 4. Providing and laying glazed tiles chips flooring on the Bankada in C.M 1:2. The work carried out in line and level including the cost of all types of materials labour , curing ,transportation ,loading, unloading and conveyancee charges etc as per directed by engineer in charge 51.0 1.00 Providing and fixing Rumble Bump Strip including fixture and fastening labor charges and direction and instruction of engr. In charge etc. Complete.(ABS Plastic Speed Breaker W350*H50*L1250mm) (1Rmt. = 4 pcs) ( 2 Black/2Yellow) (reflector on Both Side for Nigh Vision) Installation with Concrete Filling) 30 Tones Load bearing capacity) ISO brand 52.0 1.00 Providing and laying random Rubble stone Pitching of 230 mm thick in murrum with stone for embankments, berm slopes or horizontal surfaces including payments of all applicable royalty for leads & lifts, preparation of sub grade for pitching; wetting of stone; filling all the voids with murrum raking out the joints; flush pointing in CM 1:3 curing etc......... 53.0 1.00 Cleaning and grubbing of site area incl up rooting wild vegition grass, bushees, shrubs, saplingsand tries girth up to 300 mm removal of stumps of such trees cut earlier and disposal of un serviceble materials and stacking of serviceble materials to be used or auctioned up to a lead of 1000 m including removal and disposal of top organic soil not exceeding 150 mm in thickness by mechanically or manually. 54.0 1.00 Distempering with dry distemper of approved brand and manufacture (two coats) and of required shade on wall surfaces to give an even shade over and including a priming coat of whiting after thoroughly brooming the surface free form mortar drooping and other foreign matter. 55.0 1.00 Finishing wall with water proofing cement paint of approved brand and manufacture and of required shade on wall surfaces (two coats) to give an approved brand and manufacture and of required even shade after thoroughly brushing the surface to remove all dirt, and remains of loose powdered materials. 56.0 1.00 Applying priming coat over new steel and other metal surfaces after and including preparing the surface by thoroughly cleaning, oil frees, dirt and other foreign matter and scoured with brushes fine steel wool, scrapers, and sand paper with ready mixed priming paint brushing red lead. 57.0 1.00 Painting two coats (excluding priming coat) on new steel and other metal surface with synthetic enamel paint, brushing to give an even shade including cleaning the surface of all dirt, dust and other foreign matter. 58.0 1.00 Painting lines, dashes, arrows, letters, etc. on roads, air fields and like in two coats with road marking paint Brushing including cleaning the surface of all dirt, dust and other foreign matter. (I) Over 10 c.m. in width 59.0 1.00 Painting lines, dashes, arrows, letters, etc. on roads, air fields and like in two coats with road marking paint Brushing including cleaning the surface of all dirt, dust and other foreign matter. (ii) Upto 10 c.m. in width 60.0 1.00 Hire charges for penumetic drill & Pavement Bracker 61.0 1.00 Tractor Trolley (Considering 1 Tractor Trolley for 20 days ( 8 Hours Per Day Rs. 245.00 per Hour) 62.0 1.00 Hire charges for JCB with Driver 63.0 1.00 Providing Laying (to Level or slopes) and jointing 110 mm Dia. PVC Pipe 10 Kg/Cm2 with house chamber including Demolition,excavation. PCC 1:4:8,Filling,60mm thick Paving block , CC 1:2:4 between block and C.C road two sides & disposal of unserviceable with all lead and lift as directed. 64.0 1.00 Job work for House Connection to House Chamber of Manhole