|
| 1 | Earth work in Excavation in foundation trenches of drain in all sorts of soil… complete(a) Depth of Excavation not exceeding 1.5 m |
| 2 | Single brick flat soiling of picked Jhama Bricks including ramming and dressing bed to proper level and filling joits with powdered earth & soil sand. |
| 3 | Cement concrete with graded stone chips ballast ( 40mm ) down size excluding shuttering in all floor. i) 1:3:6 proportion. |
| 4 | Ordinary Cement conrete (mix 1: 1.5 : 3) with graded stone chips (20mm size) excluding shuttering and re-inforcementIf any, Pakur varieties. |
| 5 | Hire charges for shuttering with centering and necessary stagging upto 4m … complete (a) 25mm to 30 mm wooden shuttering. |
| 6 | Re-inforcement for RCC works in all sorts of structures including intersection, complete as per drawing and direction .( TOR Steel or Mild Steel) |
| 7 | Brick work of 1st Class brick with cement morter (1 : 6 ) (a) In foundation and plinth. |
| 8 | a) 125mm thick brick work with 1st class bricks in cement morter. (1 : 4)(In ground Floor) |
| 9 | Plaster of wall, floor etc with sand and cement morter (1 : 4) including rounding off or champhering corners as directed.(a) With 4 : 1 cement morter. (i) 15mm thick plaster. |
| 10 | Supplying , fitting & fixing Zn-Al alloy (55% Al & 45% Zn) coating of 150grams per sq. metre (followed by colour coated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work).(i) In Roof:- a) With 0.50 mm thick sheet |
| 11 | Applying decorative cement based paint of approved quality after preparing the surface including scraping the same thoroughly ( plastered or concrete surface ) as per manufactures specification. In ground floor. A) Two coats. |
| 12 | Labour for boring tube well of required dia. By water jet system through any type of soil starta including hire and labour charges for boring pipes , scaffolding, tools and lants as necessary and taking out of them and lowering pipes, strainers, blind pipe etc and fitting and fixing the same complete including bucket washing and other incidental works in connection. The tubewell should have a minimum 50 mm gapin between the outside of the tubewell pipe and the bore. (c) For depth upto 150 m for 40 mm dia tubewell with top enlargement of 80 mm dia.(i) 40 mm dia. Boring etc. |
| 13 | (ii) 80 mm dia boring etc top enlargement. |
| 14 | Supplying high density polythene strainer of approved make with adapter conforming to I.S. specifications.(i) 40 mm dia. |
| 15 | Supplying, fitting & Fixing P.V.C.pipes for underground work of approved make ( medium duty ) conforming to ASTMD- 1785 and threaded to match with GI Pipes as per IS: 1239 (part - I)with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longs screw, reducing stock, reducing tee, short piece etc. fittedincluding cost of all materials jointing materials, cutting pipes, making threads, cutting trenches up to 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. ( payment will be made on the centre line measured of the total pipe line including all specials no separet payment will be made for accessories, specials.)(a) 80 mm dia. |
| 16 | (b) 40 mm dia. |
| 17 | Supplying, fitting and fixing steel cutter pipe upto 450 mm long with sockets 40 mm dia. |
| 18 | Supplying, fitting and fixing PVC reducing socket with ISI mark 80 mm X 40 mm |
| 19 | Packing the annular space between the ourside of the tube well pipes and strainers and bore with pea size washed gravels of approved qualitywith ISI marks having size from 2 mm to 5 mm or the size approved by E.I.C. with cost of materials and labour complete |
| 20 | Supplying and installation of 1 HP Sub-MersiblePump Kirlosker / Crompton Graves Etc |
| 21 | Supplying, fitting and fixing gunmetal wheel valve ofapproved brand and make tested to 21 kg per sqcm. ( for water lines only ) a)25mm dia |
| 22 | Head cap with fitting & Fixing all complete as per direction |
| 23 | Supplying plastic water storage tank of approved quality with closed top with lid (Black) - multilayer(1500 Ltr Capacity) |
| 24 | Supplying, fitting and fixing push cock of heavy quality and of approved make and brand. (b) Cast iron with brass spindle(i)15 mm |
| 25 | Supplying fitting & fixing G.I. pipes ofMedium quality make with all necessary accessories specials viz , socket, bend, tee,union,cross elbow, nipple & oters necessarry , iiI) 40mm dia medium quality |
| 26 | Supplying, fitting & Fixing P.V.C.pipes for underground work of approved make ( medium duty ) conforming to ASTMD- 1785 and threaded to match with GI Pipes as per IS: 1239 (part - I)with all necessary accessories, specials viz. socket, bend, tee, union, cross, elbo, nipple, longs screw, reducing stock, reducing tee, short piece etc. fittedincluding cost of all materials jointing materials, cutting pipes, making threads, cutting trenches up to 1.5 metre below surface in all sorts of soil and refilling the same as directed complete in all respect. ( payment will be made on the centre line measured of the total pipe line including all specials no separet payment will be made for accessories, specials.)(a) 25 mm dia. |
| 27 | (a) 32 mm dia. |
| 28 | Washing and developing tube well with air compressor pump and engine for 8 (eight) hours continuous pumping per day with necessary arrangements for testing the yield in gallons per hour with \"V\" notch including hire and labour charges for all tools and plants and scaffolding as required. |
| 29 | Supply & delivery of 32 Amp. SPN Main Switch (Havell\"s) AS PER P.H.E schedule |
| 30 | Supply and delivery of 3 core 2.5mm 2 flat copper submersible cable as per PHE schedule |
| 31 | Display Board at site |
| 32 | Add GST @ 18% |
| 33 | Add Cess @ 1 % |
