Stage Contract For Sub Division Achabal- 1 Engagement of JCB for clerance of site , removal of material from road surface including erath work and disposal of surplus excavated earth as directedby engineer incharge at site complete job. 2 Engagement of Tractor for removal of material/garbage from road surface to the dumping siteasdirectedbyengineerincharge atsitecomplete job. 3 Surface dressing of the ground including removing vegetation and in-equalities not exceeding 15 cm deep and disposal of rubbish, lead upto 50 m and lift upto 1.5 m in -All kinds of soil 4 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed,( All kinds of Soil) 5 Earth work in bulk excavation by mechanical means (hydraulic excavator) over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 m2 on plan) including disposal of excavated earth lead upto 50 meters and lift upto 1.5 m, as directed by Engineer-in-Charge. All kinds of soil : 6 Earth work in excavation by manualmeans in trenches for foundations, drains, pipes, cables etc .upto required depth ) and for shafts, wells, cesspits including dressing of sides and ramming of bottoms , including getting out excavated earth and disposal of surplus excavated earth as directed,( All kinds of Soil) 7 Supply and filling of RBM /Nallah Much of required size including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacityincluding carriage of the same from approved source upto site of work complete 8 Supply and filling of Khak bajri including spreading, watering, ramming, compacting with PRR of 8 to 10 Tonne capacityincluding carriage of the same from approved source upto site of work complete( forDevelopment of berms . 9 Providing / laying of RCC Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete.10 INCH DIA 10 12 INCH DIA 11 14 INCH DIA 12 16 INCHA DIA 13 18 INCH DIA 14 24 INCH DIA 15 28 INCH DIA 16 32 INCH DIA 17 36 INCH DIA 18 39 INCH DIA 19 40 INCH DIA 20 48 INCH DIA 21 Providing / laying of MS Pipes in proper position/ grade including cutting of road surface upto required depth, providing requisite cushion including carriage ofall materials and pipesupto site ofwork complete. 6 INCH DIA 22 8 INCH DIA 23 10 INCH DIA 24 12 INCH DIA 25 Scarifying the existing bituminous road surface to a depth of 50mm and disposal of scarified material within all lifts and lead upto 1 km (by mechanical means). 26 Scarifying metalled (water-bound) road surface including disposal of rubbish lead upto 50m and consolidation of the aggregate received from scarifying with power road roller of 8 to 10 tonne capacity. 27 Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 63 to 45mm size, stone screening 13.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of work complete(Finished work to be measured) 75mm compacted thickness 28 Providing and Laying Water Bound Macadam base course with Quarry Crushed stone aggregate 53 to 22.4mm size, stone screening 11.20mm size and binding material as per MORTH specification including screening, sorting, spreading to template and consolidation with PRR of 8 to 10 Tonne capacity including carriageofQuarry Crushedstone aggrregateand stone screeing, stone dustfrom approved soucrce upto site of work complete(Finished work to be measured) 75mm compacted thickness 29 Providing,laying,spreadingandcompactinggradedstoneaggregate (sizerange53mmto0.075mm )towetmixmacadam(WMM) specificationincludingpremixingthematerialwithwateratOMCin mechanical mix plant, carriage of mixed material by tipper to site, for all leads & lifts, laying in uniform layers with mechanical paver finisher in sub- base / base course on well prepared surface and compacting with vibratory roller of 8 to 10 tonne capacity to achieve the desired density, complete as per specifications and directions of Engineer-in-Charge i/c all carriages complete job 30 Providingandapplyingtackcoatusinghotstraightrunbitumenof grade–VG-10,includingheatingthebitumen,sprayingthebitumen with mechanically operated spray unit fitted on bitumen boiler, cleaningandpreparing the existingroad surfaceasper specifications. On W.B.M/WMM @ 0.75 Kg/sqm i/c all carriages complete job 31 Providingandapplyingtackcoatusinghotstraightrunbitumenof grade–VG-10,includingheatingthebitumen,sprayingthebitumen with mechanically operated spray unit fitted on bitumen boiler, cleaningandpreparing the existingroad surfaceasper specifications. On bitumen surface @ 0.50 Kg/sqm i/c all carriages complete job 32 Providing and laying bituminous macadam using crushed stone aggregates of specified grading premixed with bituminous binder, transportedto site bytippers, laid over apreviously preparedsurface withpaverfinisherequippedwithelectronicsensortotherequired grade, level and alignment and rolling with smooth wheeled, vibratory and tandem rollers as per specifications to achieve the desired compactionand density, complete asper specificationsanddirections of Engineer-in-Charge.50 to 100 mm average compacted thickness with bitumenofgradeVG-10@3.5%(percentagebyweightoftotalmix) preparedinDrumTypeHotMixPlantof60-90TPHcapacityi/call carriages 33 Providingandlayingsemi-denseBituminousconcreteusingcrushed stone aggregates of specified grading, premixed with bituminous binder and filler, transporting the hot mix to work site by tippers, laying with paverfinisherequippedwithelectronicsensortotherequiredgrade, levelandalignmentandrollingwithsmoothwheeled,vibratoryand tandemrollerstoachievethedesiredcompactionanddensityasper specification,complete andasper directions ofEngineer-in-Charge.25 mm compacted thickness with bitumen of grade VG- 10 @ 5% (percentage by weight of total mix) and lime filler @ 2% (percentage by weightofAggregate)preparedinDrumTypeHotMixPlantof60-90 TPH capacity all carriages complete job. 34 Providing and laying of 6mm thick seal coat of premixed fine aggregate (passing2.36mmandretainedon180micronsieve)withbitumen using128kgofbitumenofgradeVG-10bitumenpercumoffine aggregate and 0.60 cum of fine aggregate per 100 sqm of road surface including rolling and finishing with road all carriages complete job. 35 Providing and laying of stone soling, hand packed, including carriage of same from approved source upto site of work complete. 36 P/L in position cement concrete in1 : 4 : 8(1 cement : 4 coarse sand : 8 graded crushed stone aggregate, 40mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. 37 P/L in position cement concrete in1 : 3 : 6 (1 cement : 3 coarse sand : 6 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete. upto plinth level 38 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 39 P/L in position cement concrete in1 : 2 : 4 (1 cement : 2 coarse sand : 4 graded crushed stone aggregate, 20mm nominal size) excluding the cost of centering and shuttering but including carriage of all materials from approved sources up to site of work complete.upto plinth level 40 Providing and laying cement concrete in retaining walls, return walls, walls (any thickness) including attached pilasters, columns, piers, abutments, pillars, posts,struts, buttresses, string or lacing courses, parapets, coping, bed blocks, anchors blocks, plain window sills, fillets etcupto floor V level, including curing but excluding the cost of centring, shuttering and finishing with. 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 41 P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete.( all works upto plinth level) 42 P/L in position reinforced cement concrete in 1 : 1.5 : 3 (1 cement:1.5 course sand: 3 Crushed graded stone aggregate 20mm nominal size) excluding the cost of centering, shuttering, finishing and reinforcement but including carriage of all materials upto site of work complete.( all works above plinth level upto level V) 43 Reinforcement for RCC work including straightening cutting, bending, placing in position and binding all complete (Thermo mechanically treated bars) including all carriages complete. FE-500 D or more 44 Providing / Fixing of necessary farm work / shuttering including strutting, propping etc and removal of same complete:- (a) Foundations, footings, bases for columns 45 Return walls, walls (any thickness) including attached pilaster buttresses, plinth and string course fillets, kerbs and steps etc. 46 Suspended floors, roofings, landings, balcones and access plateform 47 50mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 48 40mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 49 25mm thick cement concrete flooring 1:2:4 (1 cement: 2 coarse sand : 4 graded stone aggregate 20mm nominal size) finished wit a floating coat of neat cement including carriage of all materials from approved sources upto site of work complete 50 12mm cement plaster of mix 1:4 (1cement: 4 fine sand) including all carriages complete. 51 12mm cement plaster of mix 1:6 (1cement: 6 fine sand) including all carriages complete. 52 Engagement of labour /Masdoor for one day 53 Engagement of skilled labour with all machinary like cutters , axe etc for purning of the trees 54 Pumping out water caused by springs, tidal or river seepage, broken water mains or drains and the like. 55 Removal of unhygienic materials (so classified by the site engineer) from designated sites and its disposal as per directions, all inclusive 56 Clearance of slipsdisposal lead upto 50 m and lift upto 1.5 m.:- in ordinary soils disposal lead upto 50 m and lift upto 1.5 m. 57 in soils; mixed with moorum/Kankar/shingle/boulders; disposal lead upto 50 m and lift upto 1.5 m. 58 In soils; mixed with Decomposed Rocks; by blasting or any other means 59 Providing and applying 2.5mm thick road marking strips (retro-reflective) of specified shade/colour using hot thermoplastic material by fully/semiautomatic thermoplastic paint applicator machine fitted with profile shoe, glass beads dispenser, propane tank heater and profile shoe heater, driven by experienced operator on road surface including cost of material, labour, T&P, cleaning the road surface of all dirt, seals, oil, grease and foreignmaterial etc. complete as per direction of Engineer-in-charge and accordance with applicable specifications. 60 White washing with lime to give an even shade :old work (two or more coats) 61 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade, one or more coats on old work 62 Paintingroadsurfacemarkingwithadequateno.ofcoatstogive uniformfinishwithreadmixedroadmarkingpaintconformingtoIS: 164,onbituminoussurfaceinwhite/yellowshadeincludingcleaning thesurfaceofalldirt,scales,oil,greaseandforeignmaterialetc. complete.Old work ( One or more coats) 63 Providing and laying at or near ground level factory made kerb stone of M-25 grade cement in position to the required line, level and curvature jointed with cement mortar 1:3 (1 cement: 3 coarse sand) including making joints with or without grooves (thickness of the joints except at sharp curve shall not to be more than 5mm) including making drainage opening wherever required complete etc. as per direction of Engineer-incharge (length of finished kerb edging shall be measured for payment). (Precast C.C. kerb stone shall be approved by Engineer-in-charge). 64 Manufacturing supplying and fixing retro reflective sign boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity encapsulated type heat activated retro reflective sheeting conforming to type-IV of ASTM-D-4956-01 in blue and silver white or other colour combination including subject matter, message (bi-lingual), symbols and borders etc. as per IRC : 67-2001, pasted on substrate by an adhesive backing which shall be activated by applying heat and pressure conforming to class -2 of ASTM-D-4956-01 and fixing the same with suitable sized aluminum alloy rivets @ 20cm c/c to back support frame of M.S. angle iron of size 25x25x3mm along with theft resistant measures mounted and fixed with 2 nos. M.S. angles of size 35x35x5mm to a vertical post made upto M.S. Tee section ISMT 50x50x6mm welded with 16.0 (Road Work) 224 base plate of size 100x100x5mm at the bottom end and including making holes in pipes, angle flats, providing and fixing M.S. message plate of required size steel work to be painted with two or more coats of synthetic enamel paint of required shade and of approved brand & manufacture over priming coat of zinc chromate yellow primer (vertical M.S.-Tee support to be painted in black and white colours). Backside of aluminum sheet to be painted with two or more coats of epoxy paint over and including appropriate priming coats including all leads and lifts etc. complete as per drawing, specification and direction of Engineer-in-charge. 16.66.1 Mandatory/Regulatory sign boards of 900 mm diameter with part as length of 3750 mm. 65 Clearning grass and removal of rubish upto a distance of 50 m out side site 66 Felling of trees of the girth measured at height of 1 m above ground level) including cutting of trunks and branchs removing of roots and stacking of serviceable material material and disposal of unserviceable material up to lead , lift as required complete . (a)Beyond 30 cm girth up to and including 60 cm girth 67 b) Beyond 60 cm girth up to and including 120 cm girth 68 c) Beyond 120 cm girth up to and including 240 cm girth 69 Refixing of damaged sigh boardscaution board , boundray walls etc. complete job. 70 Random Rubble masonry with hard stone from qyarry in foundation and plinth including levelling up with cement concrete 1:6:12 (1 Cement: 6 coarse sand: 12 graded stone aggregate 20mm nominal size) upto plinth level and curing complete with cement mortar 1:6 (1 Cement: 6 coarse sand) Quarrycomplete job. 71 Dry Random Rubble stone Masonry using Quarry stone with bond stone in foundation and Plinth 72 Brick work with common burnt clay (non-modular) bricks of class designation 7.5 in foundation and plinth including curing in :1:4 Cement mortar 1:4 ( 1 cement : 4 coarse sand) 73 Extra for brick work with common burnt clay bricks/ cement concrete bricks in superstructure above plinth level upto floor V level 74 Structural steel work in single section, fixed with or without connecting plate, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete 75 Structural steel work in built up sections, trusses and framed work,including cutting, hoisting, fixing in position and applying a priming coat all complete , welded 76 Supply of diesel for generator 77 Supply and serving of tea/kehwa with bread 78 Supply of Drinking Water Bottle 79 Hire Charges incl Installation shamiyana/ water proof tents incl side coverings for 05 days 80 Hire Charges for plastic Chairs for 05 days 81 Providing and servingdry fruits ( almond, cashew nut, pista) in disposible glass bowls 82 Providing and fixing of Flexi banners of 5 x 3 size 83 Clearing Snow (without frost) from Roads, manually(all depths)/ from ground where tents are to fixed and its surroundings (if required) 84 Providing and fixing of temporary stage by way of plyboards and structural steel supports including furnishing complete job for 5 days 85 Supply and hoisting of colour balloons tricolour along with thread 86 Illumination of Govt. building (tri colour ) for 5 days 87 Providing of complete PA system for 5 days 88 Supply of chairs, arranging in rows behind barricading and VIP area on hire chargers including all cartriages to and fro complete (to be supplied and placed in position 05 days before the function): Sofa (5seater) with tables 89 Supply of chairs, arranging in rows behind barricading and VIP area on hire chargers including all cartriages to and fro complete (to be supplied and placed in position 05 days before the function): VIP chairs 90 Point wiring for switch controlled primary lighting points/ fan points with 3x1.5 sq mm (P+N+E)FRLSPVC insulated flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex make in recessed or surface conduiting system, incl. the cost of supplying and fixing of metallic modular grid plate mounted flush, 240 volt 6A control switch housed in zinc chromate passivity GI box with modular cover plate complete as per specifications and as required. The job includes providing and laying of circuit wiring with 3x1.5 sq mm PVC insulated multistranded copper wire laid through PVC conduit from DB to first switch in sub circuit. Separate wiring for normal and inverter supply is to be provided and no extra circuit wiring shall be paid what so ever reason or length. 91 Point wiring for 10A socket out lets with 3x2.5 sq mm (P+N+E)FRLSPVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex make in recessed or surface conduiting system, incl. the cost of supplying and fixing of metallic modular grid plate mounted flush, 3 no. 240 volt 6A5 pin socket out lets along with 3 no. 6A control switch housed in zinc chromate passivity GI box with modular cover plate complete with internal connections, loop earthing wire of same size as per specifications and as required. The job includes providing and laying of circuit wiring with 3x2.5 sq mm PVC insulated multistranded copper wire laid through PVC conduit from DB to first switch in sub circuit. Separate wiring for normal and inverter supply is to be provided and no extra circuit wiring shall be paid what so ever reason or length. (Maximum two points shall be connected on one circuit). 92 Point wiring for 16A socket out lets with 3x4 sq mm (P+N+E)FRLSPVC insulated 660/1100volt grade flexible stranded copper conductor wires of Havells/ Polycab/ Anchor/ Finolex make in recessed or surface conduiting system, incl. the cost of supplying and fixing of metallic modular grid plate mounted flush,240 volt 16A6 pin combined shuttered socket out lets along with 240volt 16A control switch housed in zinc chromate passivity GI box with modular cover plate complete with internal connections, loop earthing wire of same size as per specifications and as required. The job includes providing and laying of circuit wiring with 3x4 sq mm PVC insulated multistranded copper wire laid through PVC conduit from DB to first switch in sub circuit. Separate wiring for normal and inverter supply is to be provided and no extra circuit wiring shall be paid what so ever reason or length. (Maximum two points shall be connected on one circuit). .(Havells/ Polycab/ Anchor/ Finolex) . 93 Supply, installation, testing and commissioning of 12 Watt LED recessed/mounted (round or square) Down lighters having aluminum body, minimum 100im/w, average life 50000 hours, Operating temperature -10`C to +45`C. The job includes replacement warranty of fixture if damaged/ burnt out what so ever reason for a period of two years reckoned from the date of successful commissioning/ handing over of site to the intending department. Havells/ Philips/ Crompton/ Wipro. 94 Supply, installation, testing and commissioning of1200 mm sweep ceiling fans, incl. cost of ceiling rose (if required) and making of necessary connections. Havells/ Crompton/ Anchor/ Bajaj. 95 Supply, installation, testing and commissioning of 200 mm sweep shutter type exhaust fans (Sample to be got approved), incl. cost of ceiling rose and making of space in walls/ windows as per site and necessary connections. Havells/ Crompton/ Anchor/ Bajaj. 96 Supply and fixing of modular blanking plates on modular switch plates, excluding cost of switch plates. 97 Wiring for circuits/ sub mains along with earth wire in FRLSPVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface PVC conduit, including cost of conduit. .(Havells/ Polycab/ Anchor/ Finolex) . 2 x 2.5 sq.mm + 1x 2.5 sq. mm for inverter / solar sub main 98 Wiring for circuits/ sub mains along with earth wire in FRLSPVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface PVC conduit, including cost of conduit. .(Havells/ Polycab/ Anchor/ Finolex) .2 x 4 sq.mm + 1x 4 sq. mm for normal Lighting sub main 99 Wiring for circuits/ sub mains along with earth wire in FRLSPVC insulated 660/1100volt grade flexible stranded copper conductor wires in recessed or surface PVC conduit, including cost of conduit. .(Havells/ Polycab/ Anchor/ Finolex) .2 x 10 sq.mm + 1 x 6 sq. mm for normal /heating sub main 100 Supply and fixing of 25 mm dia. Medium grade PVC conduit including its allied accessories like bends and concealed deeps, etc. for laying of wires, recessed in RCC slab / walls including refacing of walls or fixed with necessary clips and rowel plugs . 101 Supply and fixing of fan deep made of heavy gauge sheet in RCC slabs 102 Supply and fixing of 12 way , Double door surface/ recess mounting , vertical type, 240 V, SP&NMCB distribution board of sheet steel, dust protected, duly powder painted, inclusive oftinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs, excluding cost of MCBs and Incomer. 103 Supply, installation, testing and commissioning of 5-32A single pole rating 240/415V, 10 KA “C” curve MCB suitable for inductive load in the MCB distribution board complete with necessary connections. Havells/ Indo Asian/ Legrand/Schneider. 104 Supply, installation, testing and commissioning of 32A DP rating 240V, 10 KA “C” curve MCB suitable for inductive load in the MCB distribution board complete with necessary connections. Havells/ Indo Asian/ Legrand/Schneider. 105 Supply, installation, testing and commissioning of 63A DP rating 240V, 10 KA “C” curve MCBsuitable for inductive load in the MCB distribution board complete with necessary connections.Havells/ Indo Asian/ Legrand/Schneider. 106 Supply and fixing of single pole blanking plates on existing MCB distribution boards. 107 Supply, installation, testing and commissioning of wall/floor mounted compartmentalizedmain distribution panels, fabricated out of 16 gauge sheet steel, dust protected, painted, incl. earth terminal with all necessary accessories with internal wiring as required. The panel is to be provided with the following adjustable type controlling/ protection switch gear devices: 1.NORMAL INCOMING 125A DP MCB 10KA 01 no. 200A SP&N bus bar AL. Strips 01 set Digital meter and phase indicators 01 set. 2. Generator INCOMER 100Achange over switch 01 no.200A SP&N bus bar AL. Strips 01 setDigital meter and phase indicators 01 set.3.INVERTER/ SOLAR INCOMER 40A DP MCB 10KA 01 no. 100A P&N bus bar AL. Strips 01 setDigital meter and phase indicators 01 set.OUTGOING100A DP MCB 10KA 02 no. 63A DP MCB 10KA 02 no 32A DP MCB 10KA 02 noThe contractor has to submit the test certificate of main switch gear. 108 Earthing with GI earth pipe 4.5 mtr. Long 40 mm dia. Including accessories and providing masonry enclosure with cover plate having locking arrangements and watering pipe, trenching and filling with charcoal/coke and salt. 109 Providing and fixing of 25mmx5mm GI strip on surface or in recess for extending the earthing from earth electrode to controlling panel in one run to be laid through required dia. of PVC conduit. 110 Supply, laying, connecting and commissioning of 35 sq. mm 2 core XLPE/ PVC insulated and steel armored 1.1 KV grade Aluminum LT cable for service line, incl. cost of required al. thimbles duly crimped. (Over head/ under ground). 111 Supply, laying, connecting and commissioning of fan regulator (two module) stepped type Havels/Anchor/SSK/Legrand 112 P/F PVC conduits 25mm dia (Finolex or equivalent brand) i/c all fastenings/fittings including all carriages complete job 113 RepairingHot Water electrical heaters with all necessary items required complete job 114 RepairingGenerator including fixing,with MCB, Wiring and all other necessary items required complete job 115 Providing and fixing of water purifier suitable for all borewell, tanker, munciplity water , Technology RO+UV+TDS+UF . With 1 year warranty , 4 Year service, Capacity 8L 116 Providing Single door 4 star refrigrator with base drawer, digital inverter. With 1 year warranty on the product , 20 year on compressor , Capacity 183 L 117 Supply of 2+1+1 seater sofa. Specifications:Dimensions of 2 seater 165 cm (L) x 80 cm (W) x 86 cm (H), Dimensions of 1 seater 83 cm (L) x 80 cm (W) x 86 cm (H) Seating Capacity: 2+1+1 people, Frame material : tropical solid wood , Seatfoam : polyurethane foam with recron layer. Foamdensity . Back foam : polyurethane foam with silicon fill Atarms. Foam density : 22 kg/cubic cmMaterial: Wood Upholstery Material: Fabric, Color: Grey, Style: Contemporary, Cushions: Removable and reversible Assembly 118 Providing Double bed with dimensions 198 cm L x 150 cm W x 50 cm H, Modern design headboard and foorboard.,Mattress type: High density foam, thickness 6 inch Finish : Anti-scratch and waterproof surface coating. Warranty Minimum 1 year for manufacturing defects 119 Providing Office tablewith dimensions 5 ft x 2.5 ft , Modern design: Anti-scratch and waterproof surface coating. With drawers, Warranty Minimum 1 year for manufacturing defects 120 Providing and fixing Ist quality ceramic Antiskid Floor Tiles conforming to IS : 13753 ofminiumum thickness 6 mm of approved make like NITCO, ORIENT, SOMANY KAJARIA or equivalent make in all colours, shades except begundy, bottle green, black of any size as approved by the Engineer-in-Chargein skirting, risers of steps and dados over 12 mm thick bed of Cement Mortar 1:3 (1 Cement : 3 Coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm including pointing in white cement mixed with pigment of matching shade complete. sample to be approved by Engineer-in-charge. Sizeof Tile 300 x 300 mm.(including cost of all material, leads, lifts and carriages etc upto site of work complete). 121 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS : 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer- in-Charge, in skirting, risers of steps and dados over 12 mm thick bed of cement mortar 1:3 ( 1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3 kg per sqm, including pointing in white cement mixed with pigment of matching shade complete 122 Providing and fixing water closet squatting pan (Indian type W.C. pan)with 100 mm sand cast Iron P or S trap, 10 liter low level white P.V.C.flushing cistern, including flush pipe (of approved make) with manuallycontrolled device (handle lever) conforming to IS: 7231, with all fittingsand fixtures complete, including cutting and making good the walls andfloors wherever required. 18.1.2 White vitreous china Orissa pattern W.C. pan of size 580x440mm with integral type foot rests. 123 Providing and fixing white glazed vitreous china wash basin (pedestal basin)with 32mm C.P. brass waste of standard pattern, 32mm dia C.P. brass bottle trap and union, 32mm dia C.P. pipe to wall and C.P. wall flange, CP brass Basin Mixer , CP brass angle valve with braided connection pipe complete with fixing Brackets painted white,required C.P. brass screws, nuts, bolts, consumable complete, cutting and making good the walls wherever required. 124 Providing and fixing of PVC pipes Type -B as required at site including all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 100mm dia: 125 Providing and fixing of PVC pipes Type -B as required at site including all carriage and fitting and all accessories required as per the direction of site incharge and material must be of standard make as approved by site incharge 75mm 126 P/F LONG NOSE C.P BRASS BIB COCK OF STANDARD MAKE 127 P/FC.P BRASS ANGLE Value COCK OF STANDARD MAKE 128 Providing and fixing G.I. Pipes complete with G.I. fittings and clamps (PRAKASH SURYA/JINDAL MAKE TYPE-B )i/c making good the walls etc. concealed pipe including painting with anticorrosive bitumastic paint, cutting chases and making good the wall :15 mm dia. nominal boreincluding all carriages complete job 129 Providing and placing on terrace (at all floor levels) polyethylene water storage tank ISI : 12701 marked(SINTEX HEAVY DUTY) with cover and suitable locking arrangement and making necessary holes for inlet, outlet and overflow pipes but without fittings and the base support for tankincluding all carriages complete job 130 Constructing masonry main holes 45x45x30 cm inside, in brick work in cement mortar 1:4: With common burnt clay F.P.S.(non modular) bricks of class designation 7.5. complete job i/c outer lid of heavy duty PVC i/c its frameincluding all carriages complete job 131 Providing and fixing panelling or panelling and glazing in panelled or panelledand glazed shutters for doors, windows and clerestory windows (Area ofopening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40. 3.5 mm thick glass pane (weighing not less than 10 kg/sqm 132 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.: 0.50 mm thick with zinc coating not less than 275 gram/mincluding all carriages complete job 133 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required.: 0.63 mm thick with zinc coating not less than 275 gram/mincluding all carriages complete job 134 Labour charges for applying sealant Putty for waterproofing over cracks/holes in CGI roofing i/c cost of sealant Putty and other incendentals complete job 135 Providing and fixing glass panes withglazing clips in steel doors, windows, clerestory windows, all complete with :4.0mm thick glass panesincluding all carriages complete job 136 P/F PLYWOOD CEILING USING 12MM THICK PLY WITH FRAMEWORK OF 2.5X2.5 POPLAR WOOD JOISTS I/C ALL FITTINGSFASTENINGS AND CORNICES COMPLETE JOB 137 P/Faluminium dooors/windows with al necessary fittings and fastenings i/c butt hinges , tower bolts , handles , wiremesh, glass panes , gaskets etc complete jobincluding all carriages complete job 138 P/F PVC Waste Pipe of specified dia for washbasins , urinals etcwith all necessary fittings and fastenings complete including all carriages complete job 139 P/F aluminium fittings for doors windows etc:tower bolts 100mm 140 P/F aluminium fittings for doors windows etc:tower bolts 150mm 141 P/F aluminium fittings for doors windows etc:handles 100mm 142 P/F aluminium fittings for doors windows etc: handles 150mm 143 P/F aluminium fittings for doors windows etc: sliding door bolts 200mm 144 P/F aluminium fittings for doors windows etc: Wind Hooks 145 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia and length : imported wood including all carriages complete job 146 Distempring with oil bound washable distemper of approved brand & manufactureto give an even shade New work (2 or more coats)over and incld. Priming coat with cement primer and prep of surface 147 Supplying and filling in plinth with fine sand under floors including, watering, ramming, consolidating and dressing complete. including all carriages complete job 148 P/F PPR pipes 25mm dia (Prince or equivalent brand) i/c all fastenings/fittings including all carriages complete job 149 Engagement of Carpenter /Blacksmith including materials required for the same 150 Providing and fixing panelled or panelled and glazed shutters for doors,windows and clerestory windows fixing with butt hinges of required size with necessary screws, excluding panelling which will be paid for separately, all complete as per direction of Engineer-in-charge. imported wood 30mm 151 Providing and fixing wire gauze shutters using galvanized M.S. wire gauze of average width for aperture 1.4 mm in both directions with wire of dia. 0.63 mm for doors, windows and clerestory windows with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws as per direction of Engineer-in-charge : imported wood 30mm thick 152 Providing and fixing panelling or panelling and glazing in panelled or panelled and glazed shutters for doors, windows and clerestory windows (Area of opening for panel inserts excluding portion inside grooves or rebates to be measured). Panelling for panelled or panelled and glazed shutters 25 mm to 40 mm thick. importedwood 153 Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 30x10x15 cm 1:3:6 mix ( 1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) 154 P/F aluminium sliding door bolts ISI marked anodised (anoidic coating not less than AC 10 as per IS: 1868) transparent or dyed to required colour or shade with nuts and screws complete job 300x16 mm 155 Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 156 Providing and fixing aluminum handles ISI marked anodized (anodic coating not less than grade AC 10 as per IS: 1868) transparent or dyed to required colour and shade with necessary screws etc. complete. 157 Providing and fixing aluminum tower bolts ISI marked anodized (anodiccoating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc.complete : 158 Providing and fixing aluminum casement stays, ISI marked, anodized (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete 159 Applying priming coat with ready mixed pink or grey primer of approved brand and manufacture on wood work (hard and soft wood). 160 Painting with synthetic enamel paint of approved brand and manufacture of required color to give an even shade. Two or more coats on new work of approved brand and manufacture. On wood work 161 Providing and fixing of KHATAM BANDI ceiling of first class budloo/fir wood excluding the cost of frame work which is to be paid separately.Paanch Murabah , including fixing of 12 mm thick flat pressed 3 layer medium density particle board or graded particle board (Grade I) IS: 3087 marked, in ceiling with necessary nails etc. completecomplete and French spirit polishing, Two or more coats on new works including a coat ofwood filler 162 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 1 mm thick, including Applying one coat of water thinnable cement primer of approved brand and manufacture 163 Wall painting with premium acrylic emulsion paint of interior grade, having VOC (Volatile Organic Compound) content less than 50 grams/ liter of approved brand and manufacture, including applying additional coats wherever required to achieve even shade and colour. Two coats 164 Providing and fixing precoated galvanised steel sheet roofing accessories 0.50 mm (+/- 5 %) total coated thickness(TCT), Zinc coating 120 grams per sqm as per IS: 277, in 240 mpa steel grade, 5-7 microns epoxy primer on both side of the sheet and polyester top coat 15-18 microns using self drilling/self tapping screws or with polymer coated Jor L hooks, bolts and nuts and GI:Seam bolts, and nuts,GI plain and bitumen washers complete: Ridges and Valleys (Upto 60 Cm) wide. 165 Making plinth protection 50mm thick of cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 20 mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth and curing complete 166 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 167 Providing and fixing white vitreous china pedestal type water closet (European type) withseat and lid , 10 liter low level white vitreous china flushing cistern and CP flush bend with fittings and C.I. brackets, 40mm flush bend, overflow arrangement with specials of standard make and mosquito proof coupling of approved municipal design complete, including painting of fittings and brackets, cutting and making good the walls and floors wherever requiredW.C. pan with ISI marked white solid plastic seat and lid. (Jaquar or Equivalent as Per Make List) 168 Providing and fixing wash basin with C.I. brackets,15mm C.P brass piller taps, 32 mm C.P. brass waste coupling of standard pattern,including suitable Pedestal, PVC connections to basin mixer, painting of fittings and brackets, cutting and making good the walls wherever required.white viterous china basin size 550x400 mm witn a 15mm CP Brass single hole basin mixer (Jaquar or Equivalent as Per Make List) 169 Providing and fixing Stainless Steel A ISI 304 (18/8) kitchen sink as perI.S. 13983 with C.I. brackets and stainless steel plug 40 mm, includingpainting of fittings and brackets, cutting and making good the wallswherever required :Kitchen sink with drain board510x1040mm bowl depth 250mm 170 Providing and fixing mirror of superior glass (of approved quality) and of required shape andsize with plastic moulded frame of approved make and shade with 6 mm thick hard board backing, Rectangular shape 600x450mm 171 Providing and fixing PTMT shelf 440 mm long, 124 mm width and 36 mm height of approved quality and colour, weighing not less than 300 gms 172 Providing and fixing 8 mm dia C.P. / S.S. Jet with flexible tube upto 1 metre long with S.S.triangular plate to European type W.C. of quality and make as approved by Engineer - in - charge. 173 Providing and fixing PTMT soap dish holder having length of 138mm, breadth 102mm,height of 75mm with concealed fitting arrangements, weighing not less than 106gms. 174 Providing and fixing PTMT towel rail complete with brackets fixed to wooden cleats withCP brass screws with concealed fitting arrangement of approved quality and colour, 600 mm long towel rail with total length of 645 mm, 78 mm wide and effective height of 88 mm, weighing not less than 190 gms. 175 Providing and fixing toilet paper holder of C.P. brass of approved make including all fittingsand fixtures, complete job 176 Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for supports.Make: Pipe & fittings: VECTUS/Kisan/AKG 177 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.: PN-16 pipe , 25 mm OD(SDR-7.4) 178 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-incharge.: PN-16 pipe , 32 mm OD(SDR-7.4) 179 Providing and fixing ball valve (brass) of approved quality, High or low pressure, with plastic floats completeof required dia 180 Providing and fixing 15 mm nominal bore C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms.(Jaquar or Equivalent as Per Make List) 181 Providing and fixing 15 mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved make conforming to IS : 8931 (Jaquar or Equivalent as Per Make List) 182 Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg.(Jaquar or Equivalent as Per Make List) 183 Providing in position storage type Hot Water electricalGeysor/heator with copper container, insulation, and stove enameled M.S. jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non return valve and 15/20mm dia outlet including making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts)Capacity - of approved quality and design or equivalent: 50 Litre 184 Providing in position storage type Hot Water electricalGeysor/heator with copper container, insulation, and stove enameled M.S. jacket, thermostatically controlled immersion heater, with pilot lamp, 15/20mm dia inlet with non return valve and 15/20mm dia outlet including making connections complete in all respects. (wall mounted with suitable M.S. bolts and nuts)Capacity - of approved quality and design or equivalent: 25 Litre 185 Ruled/ Flush pointing onmasonry surface with lime, surkhi and marble dust mortar in the ratio 1:1.5:1/2 one lime : 1.5 surkhi ( 50% red and 50% light yellow surkhi):1/2 marble dust ( the rate is inclusive of all materials and labours involved). 186 Providing and laying of Stones laid in wire crates with 4 mm dia black annealedwire confirming IS 280 and IS 4826 in 100mm X 100mm mesh woven diagionally including10 % extra for lapses and Joints laid with Quarry stones weighing not less than 25 kg each as per drawingIncld. cost of wire crates loading , unloading and Haulage Complete Job butFinished work to me measured 187 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm 188 Providing and erecting W metal beam crash barrier comprising 3mm thick corrugated sheet metal beam rail, 70 cm above road/ground level fixed on ISMC series channel vertical posts,150X75X5 mm spaced 1.80 M high, 110 cm below ground level all steel parts and fitments to be galvanised by hot dip process , all fittings to confirm to IS 1367 and IS 1364 metal beam rail to be fixed on vertical posts with spacer channel section 150X75X50 mm, 330 mm long complete as per clause 810.incld earth work in excavation by manual means (All kinds of soil), layingof Stone soling hand packed and providing and laying in position cement concrete in 1:2:4 (1 cement: 2coarse sand: 4 graded stone aggregate 20 mm nominal size) crushed upto plinth level in a pit of Size 600 mm X 600 mm X 600 mm. incld all taxes & GST and all carriages and shuttering. 189 Providing hoisting and fixing trusses/purlins/rafters/posts/post like components including cost of screws te. Complete in ist class imported commercial wood 190 Providing hoisting and fixing trusses/purlins/rafters/posts/post like components including cost of screws te. Complete inpopular wood 191 Taking out existing wooden door /Window shutters, repair by cutting, painting etc. and refixing of repaired door/window shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 192 Supply and fixing of wall paper of approved design and clour including all costs - complete job 193 Labour chargesfor Fixing of structural steel in welded section including all fixation chargres and all carriages complete job 194 Providing Retro-reflective regulatory sign board of size 900mmdiametermade out of 2mm thick aluminum sheet, face to be fully covered with highintensityencapsulatedlenstyperetro-reflectivesheetingasapprovedbyEngineer-in-charge.Letter,symbols,borders,etc.willbeasperIRC:67withrequiredcolourschemeontheboardsandwiththehighintensitygrade A. the aluminum sheet to be riveted to M.S. frame of angle iron ofsize 40x40x4mm. The boards will be fixed to 1 No. 50x50mm square post madeofM.S.angle50x50x4mm,4mlongweldedtotheframewithadequateanti-theftarrangement.Sheetworktobepaintedwithtwoormore coats of synthetic enamel paint over an under coat (primer) and backsideofaluminumsheet tobepaintedwith twoormorecoatsofepoxypaintincludingappropriateprimingcoatcompleteinallrespectsasper directions of Engineer-in-charge 195 Providing and fixing P.V.C low level flushing cistern with manually controlled device (handle lever) conformingto IS : 7231, with all fittingsand fixtures complete:18.19.110 liter capacity -White 196 P/F of LED ScrollingDisplay Board at Market Places or wherever necessary including all costs and carriages - complete job 197 Providingandsupplyingaluminiumextrudedtubularandotheraluminium sections as per the architectural drawings and approved shopdrawings , the aluminium quality as per grade 6063 T5 or T6 as per BS1474,includingsuperdurablepowdercoatingof60-80micronsconforming to AAMA 2604 of required colour and shade as approved bytheEngineer-in-Charge.(Theitemincludescostofmaterialsuchascleats,sleeves,screwsetc.necessaryforfabricationofextrudedaluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purposeof payment 198 Providing and fixing glass panes withglazing clips in almunium steel doors, windows, clerestory windows, all complete with :5.0mm thick glass panesincluding all carriages complete job 199 P/F of inauguration/Foundation Stone made up of Granite with engraved letters including curtain roads and all other necessary itemsas per the direcection of site incharge -all complete job 200 Providing and fixing 20mm dia C.P. brass quarter turn angle valves with C.P. brass connecting pipe, union nut and C.P. brass wall flanges. 201 Providing and Fixing of soap case /glass shelves 202 Providing and fixing of Towel rack 203 Providing and fixing uPVC class-B(IS:13592) trap of self cleaning design complete including cost of cutting and making good the cut-outs in walls and floors etc. complete (P or S trap). 100 mm inlet and 100 mm out let 204 Providing and fixing 100% stainless steel grating of approved make and quality grade 304 on top of floor trap. The rate includes the cost of all ancillary works and material as required to complete the works.: 75x75 x1 mm 205 Providing and fixing 100mm dia nominal bore uPVC pipe (Class-III) inlet fitting approximately 400mm long above the trap with one or more 32/ 40/ 50/ 65mm dia holes for jointing waste pipes from waste appliances jointed and sealed with epoxy based sealant complete. 206 Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B.Sink, floor drains etc.: 40 mm outer dia 207 Providing and fixing uPVC Pipes complete (IS: 4985 Class-III) with uPVC pipe fittings e.g. elbows, tees, reducers, unions, plugs, flanges etc. and clamps and jointing with solvent cement including chase cutting and making good the walls etc. wherever required for waste connection from W. B.Sink, floor drains etc.: 63 mm outer dia 208 Providing and fixing uPVC SWR Pipes class B (IS:13592) with all injection moulded fittings complete including jointing with solvent cement including cutting and making good the walls wherever required. (For soil, waste, vent & rain water pipes). Nothing extra will be paid for supports.: 110 mm outer dia 209 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.: PN-16 Pipe, 20mm OD(SDR-7.4) 210 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.:PN-16 Pipe, 25mm OD(SDR-7.4) 211 Providing and fixing 3 layer PP-R (Poly propylene Random copolymer) pipes conforming to IS: 15801, UV stabilized and anti-microbial fusion welded, having thermal stability for hot and cold water supply including all PP-R plain and brass threaded Polypropylene random fittings. This includes testing of joints complete as per direction of Engineer-in charge. Internal work Concealed fixing the pipe with clamps at 1.00 meter spacing including cutting chases and making good the wall etc.: PN-16 Pipe, 32mm OD(SDR-7.4) 212 Providing and fixing of 3.5 mm thick glass panes for windows & ventilators including beeding complete job 213 Providing and Fixing of imported wooden 12 mm thick T&G panelling fixedincluding Budloo wooden and 12 mm ply frame work, with all fixtures complete incl. french polishing two or more coats 214 Providing and fixing gang saw cut, mirror polished, premoulded and prepolished, machine Rate per sqm cut for kitchen platforms, vanity counters, window sills, facias and similar locations, of 16mm 18mm required size, approved shade, colour and texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding and polishing to edges to give high gloss finish etc. complete at all levels Granite of any colour or shade 215 Providing edge moulding to 18 mm/16 mm thick marble stone counters, Vanities etc. including machine polishing to edge to give high gloss finish etc. complete as per design approved by Engineer-in-Charge. Granite Work 216 Providing valleys of 90cm wide overall in plain G.S. sheets fixed with polymer coated J. or L. hooks, bolts and nuts 8 mm dia G.I. limpet and bitumen washers complete. 1.00 mm thick with zinc coating not less than 275 gram/m2 217 Providing and applying white cement based putty of specified thickness, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 2 mm thick 218 Finishing walls with water proofing cement paint of required shade on New work (two or more coats applied @ 3.84 kg/10sqm) 219 Finishing walls with acrylic smooth exterior paint of required shade on New work (Two or more coats applied @ 1.67 liter/10sqm over and including priming coat of exterior primer applied @ 2.20kg/10sqm) 220 Pointing on stone work with cement mortar 1 : 3 (1 cement : 3 fine sand) Flush/Ruled Pointing 221 Painting steel work with deluxe multi surface paint of required shade to give an even shade. Two or more coats applied @ 0.90litre/10sqm over an under coat of primer applied @ 0.80litre/10sqm of approved brand and manufacture 222 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M-30 grade made by block making machine with strong vibratory compaction and of approved size and design/shape laid in required colour and pattern over and including 50mm thick compacted bed of fine sand, filling the joints with coarse sand etc. all complete as per direction of Engineer-in-charge. 223 Providing and fixing stainless steel (Grade 304) railing made of Hollow tubes channels, plates etc. including welding ,grinding, buffing, polishing and making curvature (whereverrequired) and fitting the same with necessary stainless steel nuts and bolts complete ,including fixing the railing with necessary accessories and stainless steel dash fasteners, stainless steel bolts etc. of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, 224 Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. 225 Providing and fixing CP Brass Single leverwall mixer of quality & make as approved by Engineer in charge.(a) 15 mm nominal dia 226 Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. 227 Providing and fixing 18 mm thick, 150 mm wide pelmet of flat pressed 3 layer or graded wood particle board medium density Grade I, IS : 3087 marked including top cover of 6mm commercial ply wood conforming to IS :303 BWR grade, nickel plated M.S. pipe 20 mm dia (heavy type) curtain rod with nickel plated brackets including fixing with 25x3 mm M.S. flat 10 cm long fixed to pelmet with hollock wood cleats of size 100mm x 40mmx40 mm on both inner side of pelmet and rawl plugs 75mm long etc. all complete. 228 Engagement of Helper class for refixing CGI sheets, ceiling etc. with all necessary items required complete job. 229 Painting on G.S sheets with synthetic enamel paint of approved band and manufacture of required colour to give an even shade on New work (two or more coats) including a coat of approved steel primer but excluding a coat of mordant solution 230 Applying a coat of mordant solution on G.S. sheets: With a solution of 38gms of copper acetate in liter of soft water 231 Providing corrugated G. S. sheet roofing including vertical/curved surface fixed with polymer coated J or L hooks, bolts and nuts 8mm diameter with bitumen and G.I limpet washers or with G.I. limpet washers filled with white lead, including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/vertical or curved surface)excluding the cost of purlins, rafters and trusses and including cutting to size and shape wherever required. 0.50 mm thick with zinc coating not less than 275 gram/m2 232 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.50 mm thick with zinc coating not less than 275 gram/m2 233 Providing ridges or hips of width 60cm overall width plain G.S. sheets fixed with polymer coated J. or L hooks, bolts and nuts 8mm dia G.I. limpet and bitumen washers complete. 0.63 mm thick with zinc coating not less than 275 gram/m2 234 Providing and fixing plained eaves boarding of (300 x 40mm ) N/S with necessary grooves and chamfer as per detailed drawing.(ornamental) (imported Wood) incl cost of nails including polishing. 235 P/F of 12mm thick T&G planks made of imported wood (New zealand pine or equivalent) for roof soffits &Ceilingon wood work in false ceiling, partitions sawn and putup in position in budloo wood (Ceiling Joists).including cost of necessary adhesive &cost of nails etc. with necessary cornice of required size complete job.incl cost of nails / screws all complete as approved by Engineer-in-charge(including cost of all material, leads, lifts and carriages etc upto site of work complete).including polishing Soffits 236 P/F of wooden flooring of A class Laminated wood flooring 8mm thick fixed on foam with proper resin material, beeding and door profiles complete job 237 French spirit polishing, one or more coats on old work 238 Varnishing with flatting varnish of approved brand and manufacture oneor more coats on old work 239 Providing and fixing 15 mm nominal bore of standard back type C.P. brass close hole basin mixer pillar tap of approved quality and make, weighing not less than 1.970 kg. 240 Providing and fixing of Wardrobes of 2 ft depth of required shelves & partions, using 12mm,19mm water proof plywood and covering the face using 1.5 mm Sunmica of required shape and design incl cost of all fittings (hinges,Magnets, locks, handles Etc) complete Job 241 Engagement of carpenter 1st class for removing and refixing of ceiling, ceiling etc. with all necessary items required complete job. 242 Engagement of Plumber 1st class for repairing leakage of water fittingsetc. with all necessary items required complete job. 243 Earth work in surface excavation not exceeding 30 cm in depth but exceeding 1.5 minwidthaswellas10sqmonplanincludingdisposalofexcavatedearth, leadupto50meterand lift upto 1.5m, as directed by Engineer-in-Charge.All kinds of soil 244 Providingandsupplyingaluminiumextrudedtubularandotheraluminium sections as per the architectural drawings and approved shopdrawings , the aluminium quality as per grade 6063 T5 or T6 as per BS1474,includingsuperdurablepowdercoatingof60-80micronsconforming to AAMA 2604 of required colour and shade as approved bytheEngineer-in-Charge.(Theitemincludescostofmaterialsuchascleats,sleeves,screwsetc.necessaryforfabricationofextrudedaluminium frame work. Nothing extra shall be paid on this account). The weight of aluminium extruded section shall be taken for purposeof payment 245 Providing and fixing glass panes withglazing clips in almunium steel doors, windows, clerestory windows, all complete with :5.0mm thick glass panesincluding all carriages complete job 246 The estimated rates are exclusive of 18% GST. However the GST @18% shall be paid on gross amount excluding labour cess proportionately.
