Power Government Departments Closing in 0 days TDR #49156857

Tender For Supply Of Workshop Plant Materials And Line Material As And When Required During Fy 2025-26

Issued by Government Departments · bijbehara, Jammu And Kashmir
Tender Value
20 Lakhs
Estimated cost
Bid Submission
04 Jun 2025
0 days left
EMD
40000
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online

Tender Overview

Competition Type
NCB
Bidding Type
Tender
Location / State
bijbehara → Jammu And Kashmir
EMD Exemption
Not Available
Quantity
Not Available

Project Description

Supply Of Workshop Plant Materials And Line Material As And When Required During Fy 2025-26 , Electrical Workshop Items/Line Material : As Per Is Standards , Dpc Aluminum Of Sizes 13Swg, 14Swg,16 Swg And 18/19 Swg Of Standard Make , Suspension/Tension Clamps With Eye Hook Complete , Insulating Piercing Connector ( Al 10-95Sqmm) , Packing Gutties , Super Enamelled (Se ) 13 Swg, 16 Swg, 18 Swg And 21 Swg Of Standard Make , 11 Kv Pin Insulator With Gi Pins, 5Kn Complete(Porcelien) Of Standard Make , Straigh Through Cable Jointing Kit For 120Sqmm Ltab Cable , Straigh Through Cable Jointing Kit For 50Sqmm Ltab Cable , Lathoride Paper 10 Mil Of Standard Make , Lathoride Paper 20 Mil Of Standard Make , Ht Paper 3 Mil Of Standard Make , Hard Card Board 1Mm Of Standard Make , Hard Card Board 2Mm Of Standard Make , Hard Card Board 3Mm Of Standard Make , Glass Sleeves Of Sizes Of Standard Make , Fiber Tubes Of Standard Make , Bush Rods 12Mm(Lt) Of Standard Make , Bush Rods 19Mm(Lt) Of Standard Make , Bush Rods 25Mm(Lt) Of Standard Make , Bush Rods 30Mm(Lt) Of Standard Make , Ht Bush For Dts Of Standard Make , Lt Bush Set For 250Kva Dt Of Standard Make , Lt Bush Set For 63Kva Dt Of Standard Make , Lt Bush Set For 100Kva Of Standard Make , Aluminum Thimbles 95Sqmm Of Standard Make , Aluminum Thimbles 120Sqmm Of Standard Make , Aluminum Thimbles 185Sqmm Of Standard Make , Aluminum Thimbles 240Sqmm Of Standard Make , Aluminum Thimbles 400Sqmm Of Standard Make , Cotton Tape/ Nawar Of Standard Make , Cork Washers For 250Kva Of Standard Make , Cork Washers For 100Kva & 63Kva , Oil Seals For 250Kva Of Standard Make , Oil Seals For 100Kva & 63Kva Of Standard Make , Cork Sheets , Old Saree/Doti Cloth , Insulating Gum Of Standard Make , Aluminum Strip Of Sizes (3/6, 3/7, 4/8, 4/10Mm Etc ) Of Standard Make , Solder Less Clamp For 630Kva , Solder Less Clamp For 400Kva Of Standard Make , Soldress Clamp For 250Kva Of Standard Make , Solder Less Clamp For 100Kva & 63Kva , Gi Channel Iron X-Arm 8 Long (100X50x6 Mm) , Gi Channel Iron X-Arm 8 Long (75X40x6 Mm) , Gi Channel Iron X-Arm 5 Long (75X40x6 Mm) , Gi Angle Iron Brace 4.5 Long (50X50x6 Mm) , Gi V-Corss Arm With F Top With Back Clamps Complete @ 15.2Kg Each , Laset (9 Kv ,10 Ka ) , 11 Kv D O Fuse (Polymer )3Phase 400A , 11 Kv Link Set (Polymer) Line Type (H.D) , 11 Kv Link Set (Polymer ) (Station Type) , 11 Kv Pin Insulator With Gi Pins Complete(Polymer) Of Standard Make , Lt Shackle Insulator With Gi Mukhi Clamps Including Nuts And Bolts. , Pliers Of Standard Make , Templatesof Sizes For Building Of Dt Windings , Manilla Rope , Gi Wire , Nuts & Bolts Of Sizes With Full Thread , Transformer Oil (T.Oil) , Ht Bush Rod For Dts

BOQ

Name of Work: Supply of Workshop/Plant materials and Line Material as and when required during FY 2025-26
Sl. No. Item Description
1Electrical Workshop Items/Line Material : as per IS Standards
2DPC Aluminum of sizes 13SWG, 14SWG,16 SWG and 18/19 SWG of standard make
3Suspension/Tension Clamps with eye hook complete
4Insulating piercing Connector ( Al 10-95sqmm)
5Packing Gutties
6Super enamelled (SE ) 13 SWG, 16 SWG, 18 SWG and 21 SWG of standard make
711 KV Pin Insulator with GI Pins, 5KN Complete(Porcelien) of standard make
8Straigh through Cable Jointing Kit for 120sqmm LTAB Cable
9Straigh through Cable Jointing Kit for 50sqmm LTAB Cable
10Lathoride Paper 10 Mil of standard make
11Lathoride Paper 20 Mil of standard make
12HT Paper 3 Mil of standard make
13Hard Card Board 1mm of standard make
14Hard Card Board 2mm of standard make
15Hard Card Board 3mm of standard make
16Glass Sleeves of Sizes of standard make
17Fiber Tubes of standard make
18Bush Rods 12mm(LT) of standard make
19Bush Rods 19mm(LT) of standard make
20Bush Rods 25mm(LT) of standard make
21Bush Rods 30mm(LT) of standard make
22HT Bush for DTs of standard make
23LT Bush Set for 250KVA DT of standard make
24LT Bush Set for 63KVA DT of standard make
25LT Bush Set for 100KVA of standard make
26Aluminum Thimbles 95sqmm of standard make
27Aluminum Thimbles 120sqmm of standard make
28Aluminum Thimbles 185sqmm of standard make
29Aluminum Thimbles 240sqmm of standard make
30Aluminum Thimbles 400sqmm of standard make
31Cotton Tape/ Nawar of standard make
32Cork Washers for 250KVA of standard make
33Cork Washers for 100KVA & 63KVA
34Oil Seals for 250KVA of standard make
35Oil Seals for 100KVA & 63KVA of standard make
36Cork Sheets
37Old Saree/Doti cloth
38Insulating Gum of standard make
39Aluminum Strip of sizes (3/6, 3/7, 4/8, 4/10mm etc ) of standard make
40Solder less Clamp for 630KVA
41Solder less Clamp for 400KVA of standard make
42Soldress Clamp for 250KVA of standard make
43Solder less Clamp for 100KVA & 63KVA
44GI Channel Iron X-arm 8\" Long (100x50x6 mm)
45GI Channel Iron X-arm 8\" Long (75x40x6 mm)
46GI Channel Iron X-arm 5\" Long (75x40x6 mm)
47GI Angle Iron Brace 4.5\" Long (50x50x6 mm)
48GI V-corss Arm with F Top with back clamps complete @ 15.2kg each
49LASet (9 KV ,10 KA )
5011 kV D O Fuse (polymer )3phase 400A
5111 KV Link Set (polymer) line type (H.D)
5211 KV Link Set (polymer ) (Station Type)
5311 KV Pin Insulator with GI Pins Complete(Polymer) of standard make
54LT Shackle Insulator with GI Mukhi Clamps including nuts and bolts.
55Pliers of standard make
56Templatesof sizes for building of DT windings
57Manilla Rope
58GI Wire
59Nuts & Bolts of Sizes with full thread
60Transformer Oil (T.Oil)
61HT Bush Rod for DTs

AI Tender Summary

OUR REF NO 49156857
AUTHORITY Government Departments
TENDER VALUE 20 Lakhs
LAST DATE 04-06-2025
Authority
Authority Name Power Development Department
Work Description Supply Of Workshop Plant Materials And Line Material As And When Required During Fy 2025-26 , Electrical Workshop Items/Line Material : As Per Is Standards , Dpc Aluminum Of Sizes 13Swg, 14Swg,16 Swg And 18/19 Swg Of Standard Make , Suspension/Tension Clamps With Eye Hook Complete , Insulating Piercing Connector ( Al 10-95Sqmm) , Packing Gutties , Super Enamelled (Se ) 13 Swg, 16 Swg, 18 Swg And 21 Swg Of Standard Make , 11 Kv Pin Insulator With Gi Pins, 5Kn Complete(Porcelien) Of Standard Make , Straigh Through Cable Jointing Kit For 120Sqmm Ltab Cable , Straigh Through Cable Jointing Kit For 50Sqmm Ltab Cable , Lathoride Paper 10 Mil Of Standard Make , Lathoride Paper 20 Mil Of Standard Make , Ht Paper 3 Mil Of Standard Make , Hard Card Board 1Mm Of Standard Make , Hard Card Board 2Mm Of Standard Make , Hard Card Board 3Mm Of Standard Make , Glass Sleeves Of Sizes Of Standard Make , Fiber Tubes Of Standard Make , Bush Rods 12Mm(Lt) Of Standard Make , Bush Rods 19Mm(Lt) Of Standard Make , Bush Rods 25Mm(Lt) Of Standard Make , Bush Rods 30Mm(Lt) Of Standard Make , Ht Bush For Dts Of Standard Make , Lt Bush Set For 250Kva Dt Of Standard Make , Lt Bush Set For 63Kva Dt Of Standard Make , Lt Bush Set For 100Kva Of Standard Make , Aluminum Thimbles 95Sqmm Of Standard Make , Aluminum Thimbles 120Sqmm Of Standard Make , Aluminum Thimbles 185Sqmm Of Standard Make , Aluminum Thimbles 240Sqmm Of Standard Make , Aluminum Thimbles 400Sqmm Of Standard Make , Cotton Tape/ Nawar Of Standard Make , Cork Washers For 250Kva Of Standard Make , Cork Washers For 100Kva & 63Kva , Oil Seals For 250Kva Of Standard Make , Oil Seals For 100Kva & 63Kva Of Standard Make , Cork Sheets , Old Saree/Doti Cloth , Insulating Gum Of Standard Make , Aluminum Strip Of Sizes (3/6, 3/7, 4/8, 4/10Mm Etc ) Of Standard Make , Solder Less Clamp For 630Kva , Solder Less Clamp For 400Kva Of Standard Make , Soldress Clamp For 250Kva Of Standard Make , Solder Less Clamp For 100Kva & 63Kva , Gi Channel Iron X-Arm 8 Long (100X50x6 Mm) , Gi Channel Iron X-Arm 8 Long (75X40x6 Mm) , Gi Channel Iron X-Arm 5 Long (75X40x6 Mm) , Gi Angle Iron Brace 4.5 Long (50X50x6 Mm) , Gi V-Corss Arm With F Top With Back Clamps Complete @ 15.2Kg Each , Laset (9 Kv ,10 Ka ) , 11 Kv D O Fuse (Polymer )3Phase 400A , 11 Kv Link Set (Polymer) Line Type (H.D) , 11 Kv Link Set (Polymer ) (Station Type) , 11 Kv Pin Insulator With Gi Pins Complete(Polymer) Of Standard Make , Lt Shackle Insulator With Gi Mukhi Clamps Including Nuts And Bolts. , Pliers Of Standard Make , Templatesof Sizes For Building Of Dt Windings , Manilla Rope , Gi Wire , Nuts & Bolts Of Sizes With Full Thread , Transformer Oil (T.Oil) , Ht Bush Rod For Dts
Basic Detail
Tender No EDB/e-tender/16 of 2025-26
Bidding Type Tender
Location
City bijbehara
State Jammu And Kashmir
Key Dates
Publish Date 15 May 2025
Submission Date 04 Jun 2025
Open Date 05 Jun 2025
Finance
Tender Value 20 Lakhs
Tender Fee 1000
EMD 40000
Exemption Not Available
Document List
Tendernotice_1.pdf
dcc6bb94-b5c2-4a58-9b23-3ab35007a3be.html
BOQ_852106.xls
SBD.pdf
technicalspecifications.pdf

Unlock Full AI Tender Summary

Get instant access to the complete AI-generated analysis — scope, eligibility, timeline & more.

Instant Access Secure Free
Your details are secure and used only for document delivery.

Tender Timeline

May 15, 2025
11:30 IST

Tender Published

Tender notice published.

Completed
Jun 04, 2025
17:00 IST

Bid Submission Deadline

Online submission via eProcurement portal.

Completed
Jun 05, 2025

Bid Opening Date

Technical bids will be opened and evaluated.

Completed

Tender Documents

Download All (ZIP) ↓
pdf

Tendernotice_1.pdf

html

dcc6bb94-b5c2-4a58-9b23-3ab35007a3be.html

xls

BOQ_852106.xls

pdf

SBD.pdf

pdf

technicalspecifications.pdf

Disclaimer

We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender

TenderDetail
Loading tenders