Creation of Green Space by way of mass plantation/ Landscaping SDA upto SKIMS GATE on LHS of Bypass under National Clean Air Program (NCAP).- 1 Uprooting rank vegetation and weeds by digging the area to a depth of 60 cm removing all weeds and other growth with roots by forking repeatedly, breaking clods, rough dressing, flooding with water, uprooting fresh growths after 10 to 15 days and then fine dressing for planting new grass, including disposal of all rubbish with all leads and lifts 2 Earth work in excavation by mechanical means (hydraulic excavator) in trenches for foundations, drains, pipes, cables etc. (not exceeding 1.5 m in width) and for shafts, wells, cesspits and the like not exceeding 10 sqm on plan, including dressing of sides and ramming of bottoms lift upto 1.5 m, including getting out excavated earth and disposal of surplus excavated earth as directed, within a lead of 50 metres, All kinds of soil : 3 Providing and laying of hand packed stone boulder before laying of mud mat compacted consolidated rammed filling the voids compacting all complete carriage upto site of work all head loads complete job. 4 Providing and laying in position cement concrete of specified grade including curing butexcluding the cost of centring and shuttering. All work upto plinth level with 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 20 mm nominal size) 5 Providing and laying in position cement concrete of specified grade including curing but excluding the cost of centring and shuttering. All work upto plinth level with: 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) 6 Centering and shuttering including strutting, propping etc. and removal of form work for Walls (any thickness) including attached pilasters, buttresses, plinth and string courses etc. 7 Structural steel work in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 10.2.2 Welded 8 Steel work welded in built up sections/framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer using structural steel etc. as required. In gratings, frames, guard bar, ladder, railings, brackets, gates and similar works. 9 Providing and fixing G.I. chain link fabric fencing of required width in mesh size 50x50 mm including strengthening with 2 mm dia wire or nuts, bolts and washers as required complete as per the direction of Engineer-incharge. Made of G.I. wire of dia 4 mm 10 Painting with synthetic enamel paint of approved brand and manufactureto give an even shade. Two or more coats on new work 11 CEMENT PLASTER (IN FINE SAND) 12mm Cement plaster of mix, 1 : 6 ( 1 cement : 6 fine sand) 12 Applying one coat of water thinnable cement primer of approved brand and manufacture on wall surface 13 Finishing walls with water proofing cement paint of required shade onNew work (two or more coats applied @ 3.84 kg/10sqm) 14 Supplying and stacking of good earth at site including royalty, Spreading ofgood earth in required thickness as per directions of officer in-charge and consolidation with PRR (8-10 Ton) capacityincl. all cariiages, leads, lifts etc complete job. 15 Preparation of mounds of various size and shape by available excavated/supplied earth in layers not exceeding20 cm in depth, breaking clods, watering of each layer dressing etc. lead upto 50 meter and lift upto 1.5 m complete as per direction of officer- in -charge 16 Plantation work:- Providing & fixing of different types of trees as per the layout plan incl. digging of pits for trees/ shurbs with required inorganic/ organic manures/ river bed soil and fertilisers/ PP chemicals etc complete job. The height of the tree shall be at least 3 to 4 feet height at the time of planting with required poly bag. (Polyraised having polybag of minimum size 18x14& Plant having collar dia3/4 to 1) 17 Name of the plant 18 Cedrus deodara(Deodar) 19 Ginko biloba 20 Ligustrum vulgare 21 Lagstromia indica 22 Cupressus Torulosa 23 Bay laurel(Laurel Green) 24 Complete maintenance of the entire lawnsfeatures incl. watch & ward for 03 Years having as per yard stick in the garden area i.e. lawn trees, shrubs, herbs, edge, flower beds, foliages, creepers etc. including hoeing,weeding, pruning, replacement of plants, gap filling, watering, mowing of lawn, grass cutting by lawn mover and brush cutter, removal of garden waste, applying insecticide, pesticide & fertilizers(whenever required) top dressing of lawn with good earth and manure and maintenance of other garden related works as directed by office-in-charge (Cost of Good Earth, Manure, Fertilizer, Insecticide, Pesticide, lawn mover, water pump boosters and brush cutter with fuel and other T & P material/articles incl. electricity / Gensets as required at site shall be provided by the contractor.) and as per direction of officer in charge. ( The payment for maintenance shall be made at the end of the year from the date of completion of the work yearwise i.e. 33% every year)For03 years = 36 months 25 Manufacturing supplying and fixing retro reflective overhead signage boards made up of 2mm thick aluminum sheet, face to be fully covered with high intensity and encapsulated lens type heat activated retro reflective sheeting conforming to type-III of ASTM-D-4956-01 as approved by Engineer-in-charge; letters, borders etc. as per IRC : 67-2001 in silver white with blue colour background and with high intensity grade, pasted on substrate by pressure sensitive adhesive backing which shall be activated by applying pressure conforming to class -II of ASTM-D-4956-01 and fixing the same to the plate of structural frame work by means of suitable sized aluminum alloys, rivets or bolts and nuts @ 300mm c/c all along the periphery as well as in two vertical rows along with theft resistant measures including the cost of painting with two or more coats of epoxy paint in grey colour on the back side of aluminum sheet including appropriate priming coat. The rate includes the cost of rounding off the corners, lowering down the structural frame work from the gantry, fixing and erecting the same in position all complete as per drawing, specification and direction of Engineer-in-charge (Structural frame work including M.S. plate to be provided separately. Rectangular area of the sheet only shall be measured for payment).Overhead informatorysignage 26 Boring,providing and installing bored Tube Well of 450 mm diameter. 27 Providing and shrouding of requisite / assorted size pea gravel in the annular space of the bore hole to the gravel packed including the extra drilled space below the casing assembly and the voids created during the drilling. The job includes the cost of gravel, labour, transportation handling shrouding etc 28 Providing and fixing of following size of PVC (Ravindra make) Pipe including C/O (B-Type, specified adhesive.a) 150mm diaPVCslotted Pipes 29 Providing and fixing of GI Pipes includes all necessary fittings (heavy grade) such as Elbows, tee, union, niples etc. 30 32mm dia pipes 31 20mm dia pipes 32 Providing and fixing of 20mm Dia Size ball Cock fully way valve make of cost brass incl. CI well. 33 Providing and fixing ofService Cable of Standard make from Submersible Pump to control pannelincl. power connection complete job. 34 Providing, Installation and successful commissioning of 2.0 HP Submersible Pump of 4 dia capacity incl. all fiitings & fixtures but excl. pannel board complete job. 35 Providing and fixing ofcontrol pannelbox for submersible pump incl all fixturescomplete job 36 Dismantling of exisiting barbed wire fencing with angle iron embeded in CC Blocks incl. stacking of same by way of cutting etc incl. cost of genset with POL as per the instructions of Engineer-in-charge complete job. 37 Carriage of material by mechanical transport ,including loading, unloading & stacking complete 38 (a)Sand from source for an average lead of 20km 39 (b)Stone agg. 40mm and belowfor an lead of 20km.
