|
| 1 | Removing rich mix cement concrete including stacking the spoils as directed with all leads, lifts etc, complete. |
| 2 | Excavation for foundation in earth, soil of all types, sand, gravel and soft murum, including removingtheexcavatedmaterialuptoadistance of50m.beyondthebuildingareaand stackingandspreadingas directed,dewatering,preparingthebedforthefoundationand necessary back filling, ramming, watering including shoring and strutting etc. complete. By Mechanical Means(Spec. No. : Bd.A. 1 Page 259/CSR I Page No. 148) |
| 3 | Providing soling using 80 mm size granite / quartzite / gneiss / trap metal in 15 cm. layer including hand packing filling voids with sand / grit, ramming, watering complete.(Spec. No. : As directed by Engineer-in-charge /Page No. 154) |
| 4 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteinM- 10oftrap/granite/ quartzite/gneissmetalforfoundationand beddingincludingbailingoutwater,Steel centering, formwork, laying/pumping, compacting, roughening them if special finish is to be provided,finishingifrequiredandcuringcomplete,withfully automaticmicroprocessor based PLC with SCADA enabled reversible Drum Type mixer/concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 5 | Providing , laying and fixing ,jointingEco- drain 200 mm SN 4 Nu- Drain Upvc pipes or of equivalent make, manufacture as per EN 13476 or equivalent as per I.S.15328 with fittings suchabends,teestees,coupler etc,jointingwithrubberlubricantincludingnecessary excavation, trench refilling with selective excavated materialetc. complete. |
| 6 | Providing and laying in situ /Ready Mixcement concreteM-20of trap / granite /quartzite/ gneiss metalforR.C.C.work infoundationslike raft,stripfoundations,grillageand footingsofR.C.C.columnsand steelstanchions etc.includingbailingoutwater, Steel centering formwork,laying/pumpingcoverblocks,compactionandcuring roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) etc. complete. With fine aggregate (Crushed sand VSI Grade) |
| 7 | Providing and laying in situ / ready mix M20 RCC of trap/ granite/ quartzite/ gneiss metal for RCC work of ballast walls, kerbs and box returns including scaffolding, compaction, formwork finishing and curing etc. complete. (excluding reinforcement, with fully automatic micro processor based PLC with SCADA enabled concrete batch mix plant / pan mixer with Natural / VSI standard Artificial Sand) |
| 8 | Providingand layingin situ / readymix M-20 controlled cement concrete oftrap/granite/ quartzite/ gneiss metal for RCC work in solid/ deck slabetc.including ramming, vibrating,curing, formwork, centering and finishing in cement plaster excluding reinforcement etc.complete.(withfullyautomaticmicroprocessorbasedPLCwith SCADA enabledconcrete batch mix plant / pan mixer and fine agreegates of required specifications ( VSI sand finely washed etc ) |
| 9 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters for R.C.C. pile caps, footings, foundations, slabs, beams columns, canopies, staircase, newels, chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs, drawings and schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as required complete. |
| 10 | Providing and fixing precast 80 mm thick RCC Cover in M-30 for man holes of various sizes with reinforcement of 10 mm dia both way tied with tack welding @ 150 mm c/c with 2 hooks of 12 mm dia bars etc.complete. |
| 11 | Providing and fixing in position steel fibre reinforced concrete (S.F.R.C.) frame and covers of approved make including loading, unloading, transportation, all taxes, etc.complete |
| 12 | Providing and laying in-situM30 Grade unreinforced plain cement concrete pavement over a prepared sub base with 43 grade cement , coarse and fine aggregate( VSI grade finely washed crushed sand) conforming to IS 383, using fine and coarse aggregates combined gradation asperTable600-3ofMORTHSpecification2013,mixedin abatchingand mixing plant/ non tilting mixer and Weigh batcheras per approved mix design,admixtures,transporting to site,spreading,laying with approved make paver,compacted and finished in a continuous operation, finishing to lines and gradesas directed by Engineer-in- charge andcuring bycuringcompound/byprovidingcementvatain cement Mortar 1:8 @0.6m X 0.6m centre to centre, admeasuring 80 mm at bottomand40mmattopwith depthof75mmandmaintainingthesame throughout curing period by any other method approved by Engineer-in- charge. |
| 13 | Providingandfixingboarddisplayinginformation,suchas\"Nameof work,Tendercost, Name of Contractor, Work completion and liability period etc\", having rectangular shape of 1.20m x 0.90m size made out 18 gauge(1.25mm)thickmildsteelsheetpaintedwithonecoatofZinc chromate stoving primer and two coats of enamel paint on front side and grey stove enamel on back side and border / messages / symbols etc. with approved colour shade paint complete, on M.S.angle of size 35 x 35 x 3 mm frame with properly cross braced M.S. angles of size 35mmx35mmx3mm duly painted including Two M.S. angle iron posts of size65 mm x65 mm x6 mm, 3.65 m long paintedwithalternateblack and white bands of 25 cm width including all fixtures etc.and fixing the boards in 1:4:8 concrete block of size 60 cm x 60 cm x75cmincluding, excavation,refilling, transportation, and labouretc complete.Spec. Number As directed by Engineer in Charge |
| 14 | Transportation of Material obtained from debries of various sorts including necessary excavation / loosing including loading, unloading and conveying and disposing as directed. |
