Renovation Work At Sub-Division Debari Udaipur - Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster incl. disposal of rubbish to the dumping ground within 50mtr lead 180 sqm 15.00 2700.00 2 B-13.4.1 Renewing glass panes, with putty and nails wherever necessary : Float glass panes of thickness 4 mm 5 sqm 617.00 3085.00 3 B-9.26 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150 mm distance. 10 sqm 617.00 6170.00 4 B-12.46.2 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : One or more coats on old work. 300 Sqm 34.00 10200.00 5 B-12.37.2 (a) Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Old work (one or more coats) including scrapping surface and necessary repairs. Colour Change 800 Sqm 15.00 12000.00 6 B-12.43.2 Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision. (a) Old Work 400 Sqm 50.00 20000.00 7 B-12.22.2 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete Old Plastered Surface (two or more coats) 80 sqm 46.00 3680.00 8 B-12.3.2 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finished: 20 mm thick. 200 Sqm 190.00 38000.00 9 B-8.13.2.1 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A : 30 mm thick . Commercial Veneer both side 6 Sqm 1841.00 11046.00 10 B-8.31 Providing and fixing bright finished Mortice lock of approved make Godrej or equivalent with pair of CP handles for doors with necessary screws etc complete (Best make of approved quality) as per direction of Engineer-in-charge. 6 Each 629.00 3774.00 11 B-5.8.3 Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) 25 Sqm 526.00 13150.00 12 B-6.17.3 Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges : Kota stone minimum 30mm thick. 15 Sqm 609.00 9135.00 13 B-13.24 Labour charges for repair to door / window without using any material such as applying randha (finishing) tightening of bolts & screw etc. 10 Sqm 220.00 2200.00 14 B-9.19.3 - B-9.24 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038- 1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of plain glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required : Windows side hung /Ventilators top or centre hung (openable) Deduct for Pin headed 4mm thick glass panels is used instead of 4mm thick plain glass 3 Sqm 2978.25 8934.75 15 B-9.27 Providing and fixing square bars or other flat welded to window, Ventilators etc 12 Kg 65.00 780.00 ASSISTANT ENGINEER CIVIL UDAIPUR SCHEDULE `G` / ABSTRACT OF COST Name of work: - Renovation work at Sub-division debari Udaipur. AJMER VIDYUT VITRAN NIGAM LIMITED 16 B-13.23 Repair of existing steel glazed doors, windows and ventilator,MS sheet door,garage doors,compound wall gates etc by welding drilling complete include cost of welding rods and hire charge of welding machine & TP etc complete. 20 Sqm 332.00 6640.00 17 B-7.12 Providing and fixing 1st quality standard white, grey, ivory, fume red brown, light green, light blue and other light shades glazed tiles confirming to IS : 13753 & IS :15622 of size 200mm x 300mm in walls, floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (excluding the cost of cement plaster on walls and pillar). 35 Sqm 674.00 23590.00 18 B-7.13 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 10 Sqm 748.00 7480.00 19 B-7.18.2 P & F 1st qualityVitrified Porcelain Polished tiles on floor, skirting and steps etc.in different sizes (thickness to be specified by manufactuer) with water absortion less than 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1 : 4 including grounting the joints with white cement and matching pigment etc complete. size 600 mm X 600 mm 25 sqm 911.00 22775.00 20 B-3.1.1 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 4 Cum 4915.00 19660.00 21 B-17.1 Supply and installation of Multi Rib Proofing/cladding Sheet Manufacture out of 0.50mm TCT (Total Coated Thickness) high tensile Zinc aluminum alloy coated galvalume steel (as per 150gsm zinc aluminum coated 550Mpa tuekd strength) confirming to IS: 1397/astm A-792 sheet to have wide pens 30mm high NB at 250 centre and centre width of 1020mm sheets be casted with regular modified polyster system on a continuous with line on centre for face and with a polyster coating respectively sheet shall have proportionality with siphoned plate made to prevent leakage sheet shall be fixed by more of sell drilling lift tapping hot dip zinc coated hox head fasterner of size 12x14x55mm long. The sheet shall be supplied in cost one length and for a minimum up to 12mts with all scaffolding. 65 Sqm 689.00 44785.00 22 B-9.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 650 Kg 81.00 52650.00 23 B-9.39 Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge 18 Sqm 3895.00 70110.00 392544.75 Sig. of Contractor EXECUTIVE ENGINEER (CIVIL) Avvnl Udaipur Total Part A = Assistant Engineer (Civil) Avvnl Udaipur I/ we offer our rate @ ...................... % Above/ Below the ‘G’ SCHEDULE. Part -(B) S.N BSR Ref Particulars Qty Rate Unit Amount 1 S-1.2.2 P & F indian type white glazed viterous china I st quality W.C. orissa pan (I.S. : 2556 Mark) with 100 mm vitreous china P or S trap including cutting and making good the wall and floor. Size 580 X 440 mm 1 3080.00 Each 3080.00 2 S-1.3 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 1 2420.00 Each 2420.00 3 S-1.7.2 P & F water closet seat covers with brass hinges complete : Solid PVC (IS 2548 marked) grade-1 white for EWC 1 485.00 Each 485.00 4 S-1.20.2 P & F low level Flushing Cistern of 10 liters capacity 9IS:2556 mark), of approve make with complete fittings CI brakets duly painted, brass ball cock with ball, (IS: 1703 mark) complete including cutting and making good the wall: PVC with PVC bend as per IS 7231 1 1291.00 Each 1291.00 5 S-1.59 P & F jet spray for water closet with CP copper tube flange of approved make 1 381.00 Each 381.00 6 S-2.14.9 P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make : Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / make, 25mm nominal bore. 1 551.00 Each 551.00 7 S-2.15.1 P & F full way valve (IS 778 mark) or wheel valve of app make gunmetal 15 mm nominal bore 2 227.00 Each 454.00 8 S-2.15.3 P & F full way valve (IS 778 mark) or wheel valve of app make gunmetal 25 mm nominal bore 2 529.00 Each 1058.00 9 S-2.7.1 P & F Bib Cock (IS:8931 Mark) Superior quality of approved make :Brass 400 gm. 15 mm nominal bore. 6 298.00 Each 1788.00 10 S-1.48.1 P&F Grating of approved quality/ makeStainless steel sheet size 125mm dia 5 62.00 Each 310.00 S-3.16.2 P&F rigid PVC Pipe (IS:4985 mark) class II(4 Kg. /Cm.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant75mm dia 10 177.00 Mtr 1770.00 S-3.16.3 (B)110mm dia 20 282.00 Mtr 5640.00 S-3.17.18 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:(A) Plain floor trap 110 mm Dia 1 230.00 Each 230.00 S-3.17..9 (ii) (B)Bend 87.5, 110 mm 4 161.00 Each 644.00 S-3.17..9 (i) (C)Bend 87.5, 75 mm 3 97.00 Each 291.00 S-3.17.4 (ii) (E) Door -Tee 110 mm dia 1 213.00 Each 213.00 S-3.17.12 (ii) (F) Vent Cowel 110 mm dia 1 56.00 Each 56.00 13 S-2.13.2 P & F 15 mm. Dia Connection pipe of approved quality/make: -do- up to length 370 mm. 3 79.00 Each 237.00 14 S-2.8.1 P&F stop cock (IS:8931 Mark ), superior quality & of approved make : Brass 400 gm, 15mm nominal bore. 3 319.00 Each 957.00 15 S-2.11.1 P & F Ball Cock (IS:1703 Mark) with Rod & P.V.C. Ball complete :Brass wt. not less than 300 gm, 15mm 1 314.00 Each 314.00 16 S-2.26.3 P & F PVC Stroage tank (IS 12701 marked) including the BIS license No of app make with cover 25 mm dia 1 m long GI over flow pipe & 25 cm long wash out pipe with plug & socket incl making connection comp of app design 500 lit capacity 2 3920.00 Each 7840.00 17 S-1.36.3 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall : Size 550 mm x 400 mm 1 2598.00 Each 2598.00 11 12 AJMER VIDHYUT VITRAN NIGAM Ltd Assistant Engineer (Civil).Udaipur ABSTRACT OF COST/SCHEDULE G Name of work: - Renovation work at Sub-division debari Udaipur. BSR-2022 18 S-2.37.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings i/c fixing the pipe with clamps at 1 metre spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. (Internal work Exposed on wall) 15 mm nominal size 10 191.00 Rm 1910.00 19 S-2.37.3 _______DO__________ 25 mm nominal size 20 282.00 Rm 5640.00 20 S-2.39.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes (IS 15778 : 2007 code) having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings, this included jointing of pipes & fittings with one step CPVC solvent cement , trenching refilling & testing of joints complete as per direction of Engineer in Charge. (External work). 15 mm nominal bore 10 167.00 Rm 1670.00 21 S-2.39.3 _______DO__________ 25 mm nominal size 25 262.00 Rm 6550.00 22 S-1.14.1 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete. Flat Back (small) size 456x355x265mm. 1 1832.00 Each 1832.00 23 S-3.27.1 Construction of septic Tank in all types of soil with 40 Cm .thick masonry in CM 1:6, 15 Cm thick C.C bed of 1:5:10, M- 15 grade C.C floor & RCC slab covering with M15 grade c.c. floor, 50 mm thick stone slab partition walls, 20 mm thick plaster in CM 1:6 finished with neat floating cement, 4 Nos stone foot rests of approved design ,two No. 450 mm dia each Ferro cement cover with frame, earth work etc. complete as per approved drawing including disposal of surplus earth within a lead of 50 mtr:- Size 200x100x130 cm.(for 10 users) with 115 mm thick RCC (M-20) slab with Tor steel reinforcement 8mm ϕ @15 cm c/c bothways including shuttering complete in all respect. 1 27322.00 Each 27322.00 77532.00 Assistant Engineer (Civil) Avvnl Udaipur I/ we offer our rate @ ...................... % Above/ Below the ‘G’ SCHEDULE. Sig. of Contractor EXECUTIVE ENGINEER (CIVIL) Avvnl Udaipur Total Part B = S.No Part C- Electric work BSR Ref. Qty Unit Rate Amount 1 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) on surface ISI marked ( IS:14927 P - II ) virgin material UPVC trunking & its accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal/ Surface Moulded virgin material UPVC Modular Box , 10 A Modular switch,Modular face plate with grid plate, 3 pinceiling rose/holder /3 way Connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR (a) Short point( up to 3m) E-3.1.1 15.00 Each 361.00 5415.00 2 (b) Medium point(up to 6m) E-3.1.2 25.00 Each 584.00 14600.00 3 (c) Long point (up to 10m) E-3.1.3 5.00 Each 814.00 4070.00 4 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/ casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR (a) 2x1.5 sqmm E-4.1.2 25.00 Pmtr 43.00 1075.00 5 (b) 2x2.5sqmm+1x1.5sqmm E-4.1.7 80.00 Pmtr 81.00 6480.00 6 Providing & Fixing of modular type switch/ bell push duly ISI marked (IS:3854) with CM/L no. printed and made out of unbreakable and fire retardant vergin UV Stabilized Polycarbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating ,minimum width of switch toggle( PUSH PART ) should not less then 20mm, including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 10 A one way switch E-7.27.1 20.00 Each 55.00 1100.00 7 Providing & Fixing of modular type lockable feature socket duly made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge, making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 6 A 3/5 pin shuttered socket E-7.28.1 20.00 Each 107.00 2140.00 8 Providing & Fixing of Recessed/surface mounting heavy duty Enclosure made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted complete with din rail making internal DB terminations with copper lugs, detachable gland plate, including making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure A attached with this BSR Suitable for Six / Eight module for MCB/ RCCB E-6.9.2 1.00 Each 1099.00 1099.00 9 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. , conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR (A) 6A to 32A rating E-6.1.1.2 6.00 Each 187.00 1122.00 AJMER VIDHYUT VITRAN NIGAM LIMITED ABSTRACT OF COST / SHEDULE G Name of work: - Renovation work at Sub-division debari Udaipur. PWD BSR 2022 10 Providing & Fixing of 240/415 V isolator ISI marked IS:13947- III/conforming to IEC 60947-3, suitable for AC22A utilization category, 4KV impulse withstand voltage, true contact indication, Red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. IP 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL/ CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure A attached with this BSR Double pole isolator 30/40 A rating E-6.2.1.1 1.00 Each 351.00 351.00 11 Providing & Fixing of modular type 120 W Step Fan regulator duly ISI marked (IS 11037:1984 ) with CM/L no. printed made out of unbreakable and fire retardant vergin poly carbonate with brass terminals and captive screws & silver alloy contact tip with IP-20 rating , including all as per pre approved by Engineer in charge,making connections, testing etc. as required. For additional technical parameters of product / work refer Annexure A attached with this BSR 5 step fan regulator 2 Module 360 dgree rotating E-7.29.1 10.00 Each 398.00 3980.00 12 Providing and fixing of power plug point with non modular accessories as per PWD specification for electrical Works with Galvanized box of 1.2 mm thick with earth terminal with suitable size phenolic laminated sheet (IS : 2036 - 1995) cover including cost of 16 amp. Switch (IS :3854) and 3/6 pin 16 amp. socket outlet making connection , testing , etc. as required. . For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure A attached with this BSR E-7.36 10.00 Each 303.00 3030.00 13 Providing & Fixing of energy efficient direct fit (Retrofit) Polycarbonate/ Glass housing SMD Mid Power LED tube rod (with integral driver & alumn. heat sink ), on existing fixture. system lumen efficacy ≥ 100 lm/Watt output, internal surge protection of 2.5 KV ,THD < 20% ,p.f.≥0.95,CRI >80 , life time of minimum 35000 Burning Hours with , 70% of intial Lumen maintaned till life ends , CCT 3000°K / 4000°K / 5700°K /6000°K/6500°K (As per ANSI Bin) , maximum power consumption should not more than the specified rating and Fixture shall be of BIS standard and trade mark certificate ( T.C.). Manufactures Word Mark/ Name Engraved/ Embossing/ Screen printing on housing. OEM must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79 & LM80)certificate / Report from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 1200mm , Min. Lumens output 2000 lm LED Tube rod with Polycarbonate Housing
