Renovation Work At Sub-Division (O&Ampm) Choti Sadri, Pratapgarh - 1 B-14/14.55 Dismantling old plaster or skirting, raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 meter lead. 270.00 15.00 P.Sqm 4050.00 2 B- 13/13.4.1 Renewing glass panes,with putty and nails wherever necessary Float glass panes of thickness 4 mm 10.00 617.00 P.Sqm 6170.00 3 B-13/13.15 Patch repair to cement concrete floor including digging out old floor in regular shape and removal of rubbish curing etc. complete in all respects. 5.00 317.00 P.Sqm 1585.00 4 B-1/1.31 Clearing jungle including uprooting of rank vegetation, grass, brush wood, trees and saplings of girth upto 30 cm measured at a height of 1 m above ground level and removal of rubbish upto a distance of 50 m outside the periphery of the area cleared. 80.00 5.00 P.Sqm 400.00 5 B-5/5.8.3 Half brick masonry in Superstructure , above plinth level upto floor V level using bricks of designation 75 Cement mortar 1 : 6 (1 cement : 6 coarse sand) 10.00 526.00 P.Sqm 5260.00 6 B-7/7.13 Providing and fixing 1st quality MAT finished ceremic tile size 300x300mm confirming to IS : 13755 and IS : 15622 colour such as white, grey, ivory, fume red brown, light green, light blue and other light shades in floors, steps, pillars etc. laid on a bed of neat cement slurry finished with flush pointing in the white cement mixed with pigment to match the shade of the tile complete (including the cost of cement mortar bed 1:4). 3.50 748.00 P.Sqm 2618.00 7 B- 8/8.13.2.1 Providing and fixing external grade board solid core single leaf flush door shutters ISI 2202-67 marked using Phenol formal dehyderesin in glue both sides with approved steel fittings complete as per annexure A : 30 mm thick .Commercial Veneer both side 11.00 1841.00 P.Sqm 20251.00 AJMER VIDYUT VITRAN NIGAM LIMITED Office of Assistant Engineer (Civil),Pratapgarh SCHEDULE G BSR-2022 Name of work:- Renovation work of Sub-Division (O&M), Choti Sadri 8 B-8/8.37 Providing and fixing S.S. Rod 30mm dia (304 grade ,16SWG) including brackets fixed with C.P. brass screws and rawl plugs, etc., wherever necessary complete two side central all fittings. 20.00 650.00 R.Mtr 13000.00 9 B-9/9.26 Supplying and fixing fixed wire gauge of 14 mesh x 24 gauge to the metal frame of rolled section by metal beading 20x3mm with suitable screw at not exceeding 150mm distance. 13.50 617.00 P.Sqm 8329.50 10 B-9/9.27 Providing and fixing Square bars or other flat welded to window, ventilatiors etc. 100.00 65.00 P.Kg 6500.00 11 B- 12/12.3.2 Plaster on new surface on walls in cement sand mortar 1:6 including racking of joint etc. complete fine finish :20mm thick. 280.00 190.00 P.Sqm 53200.00 12 B- 2/12.22.1 Providing and applying white cement based putty over plastered surface to prepare the surface even and smooth complete New Plastered Surface (three or more coats) 100.00 84.00 P.Sqm 8400.00 13 B- 12/12.37.2 Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade including all scaffolding: Old work (one or more coats) including scrapping surface and necessary repairs (a).Colour Change 1150.00 15.00 P.Sqm 17250.00 14 B- 12/12.43.2 Painting exterior surface of Wall with 100% acrylic exterior paint of approved brand and manufacture to give an even shade with two or more coats including prepartion of base with sand papering, primer, putty, etc complete in all respect including scaffolding and safety provision Old Work 860.00 50.00 P.Sqm 43000.00 15 B-9/9.39 Providing and fixing of double leaf steel shutter for cupboard, the frame is made of pressed steel ISI section 80x25 mmx 1.25 mm thick with 1.00 mm MS sheet to spot welded including holdfasts of 15x3mm, MS oxidized fittings such as butt hinges, sliding doors bolts, handles, tower bolts and twin peg etc complete including applying priming coat of approved steel primer of red oxide zinc chromate and spray painting in approved shade with deco paint of approved quality complete as per direction of Engineer In Charge 63.00 3895.00 P.Sqm 245385.00 16 B- 12/12.46.1 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : Two or more coats on new work 50.00 69.00 P.Sqm 3450.00 (B) 12.46.2 One or more coat on old work 60.00 34.00 P.Sqm 2040.00 17 B-6/6.17.3 Supplying and fixing in walls machine cut and polished stone shelves, tands and in CM 1:3 with machine cut edges :Kota stone minimum 30mm thick. 15.00 609.00 P.Sqm 9135.00 18 B-7/7.22.3 P & F 1st qualityHeavy Duty Vitrified Polished Digital tiles on floor, skirting and steps etc.in different sizes (thickness minimum 10mm) with water absortion less than or equal 0.08% and conforming to IS 15622 of approved make in all colour and shade, laid with 20 mm thick CM 1: 4 including grounting the joints with white cement and matching pigment etc complete.Size 600mm x 600mm 17.00 1126.00 P.Sqm 19142.00 19 B-9/9.19.3- 9.24 Providing and fixing steel glazed doors windows and ventilator shutters of standard rolled steel section (IS 1038-1983) joints mitred and welded with steel lugs 13x3mm, 10cm. long embedded in cement concrete block 15x10x10cm. of 1:3:6 (1cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) or with wooden plugs and screws or rawl plugs and screws with fixing clips or with bolts and nuts as required including providing and fixing of pin headed glass panes 4mm thick with cooper glazing clips and special metal sash putty of approved make or metal beading with screws complete including priming coat of approval steel primer, excluding the cost of metal beading and other fitting except necessary hinges of pivots steel handles peg stay etc. as required :Windows side hung /Ventilators top or centre hung (openable) 12.00 2978.25 P.Sqm 35739.00 20 B-5/5.2.2 Brick work with F.P.S. bricks of class designation 75 in superstructure above plinth level upto floor V level in all shapes and sizes in : Cement mortar 1 : 6 (1 cement : 6 coarse sand) 0.50 4990.00 P.Cum 2495.00 21 B- 11/11.18.2 Kota stone slab flooring 25 mm thick over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand)For area of each slab from 2001 to 5000 Sq.Cm 140.00 1023.00 P.Sqm 143220.00 22 B- 11/11.19.1 Kota stone slabs 25 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete For area of each slab upto 2001 Sqcm 14.00 912.00 P.Sqm 12768.00 23 B-3/3.1.1 Providing and laying in position cement concrete including curing, compaction etc. complete in specified grade excluding the cost of centering and shuttering - All work up to plinth level. M20 grade Nominal Mix 1: 1.5: 3 (1 cement : 1.5 coarse sand : 3 graded stone aggregate 20mm nominal size). 17.50 4915.00 P.Cum 86012.50 24 B-9/9.2 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting (height upto 10 m) , fixing in position and applying a priming coat of approved steel primer all complete: 300.00 81.00 P.Kg 24300.00 25 B- 10/10.1.3 Providing corrugated G.S. sheet roofing including vertical / curved surface fixed with polymer coated J or L hooks, bolts and nuts 8 mm diameter with bitumen and G.I. limpet washers or with G.I. limpet washers filled with white lead and including a coat of approved steel primer and two coats of approved paint on overlapping of sheets complete (upto any pitch in horizontal/ vertical or curved surfaces) excluding the cost of purlins, rafters and trusses and including cutting to size and shape whenever required.0.63 mm thick with zinc coating not less than 275 gm/m2 36.00 645.00 P.Sqm 23220.00 G. Total Rs- 796920.00 Executive Engineer (Civil) Assistant Engineer (Civil) AVVNL Chittorgarh AVVNL Pratapgarh Part B S. No. BSR Ref. Particulars Qty. Rate Unite Amount 1 2 3 4 5 6 7 1 S-1/1.3 P & F European type white glazed vitreous china 1st quality W.C pan (IS : 2556 Mark) with P or S trap including cutting and making good the wall and floor 2.00 2420.00 Each 4840.00 2 S-1/1.9 Labour charges for removing W.C. pan (any type) of all sizes with care including all necessary fittings P or S trap. 1.00 286.00 Each 286.00 3 S-1/1.7.1 P & F water closet Seat Covers with brass hinges complete :Solid PVC (IS 2548 marked) grade-I Black for EWC. 2.00 402.00 Each 804.00 4 S-1/1.14.1 P & F lst quality WVC Urinal (IS:2556 mark) with 25mm dia G.I. waste pipe, dome waste couplings, concealed iron brackets or screws etc complete.Flat Back (small) size 456x355x265mm. 2.00 1832.00 Each 3664.00 5 S-1/1.20.2 P & F Low level Flushing Cistern of 10 litres capacity (IS : 2556 mark) of approved make with complete fittings C.I. brackets duly painted, brass ball cock with ball (IS: 1703 mark) complete including cutting and making good the wall:PVC with PVC bend as per IS : 7231 . 1.00 1291.00 Each 1291.00 6 S-1/1.43.2 P& F waste Pipe with all fitting P.V.C with PVC nut 32 mm 1.00 61.00 Each 61.00 7 S-1/1.45.1 P & F Looking Mirrors with P.V.C. frame of approved make as per direction of Engineer-incharge Size 500x400mm 2.00 351.00 Each 702.00 8 S-1/1.46.1 P & F Toilet Shelf of approved quality/make:W.V.C. (I.S.: 2556 Mark) Size 300mm 1.00 440.00 Each 440.00 9 S-1/1.47.3 P & F Towel Rail or Ring of approved quality/make: C.P. brass towel rail with brackets 450 x 20mm. 1.00 296.00 Each 296.00 10 S-1/1.48.1 P & F Grating of approved quality/make:Stainless Steel Sheet size 125mm dia. 2.00 62.00 Each 124.00 11 S-1/1.59 P & F Jet spray for water closet with C.P. Copper Tube flange of approved make. 1.00 381.00 Each 381.00 12 S-2/2.1.1 P & F G.I. pipes (Internal Work) with G.I. Fittings excluding union (IS:1239 Mark) & MS clamps including cutting and making good the walls and floors:15 mm dia nominal bore B Class 15.00 230.00 R.Mtr 3450.00 (B) 2.1.3 25mm dia nominal bore B Class 10.00 360.00 R.Mtr 3600.00 AJMER VIDYUT VITRAN NIGAM LIMITED Office of Assistant Engineer (Civil),Pratapgarh SCHEDULE G BSR-2022 Name of work:- Renovation work at Sub-Division(O&M), Choti Sadri 13 S-2/2.2.1 P & F G.I. Pipes (External Work) with G.I. fittings excluding union (IS : 1239 Mark) including trenching & refilling earth etc.15mm dia nominal bore B Class 10.00 190.00 R.Mtr 1900.00 (B) 2.2.3 25mm dia nominal bore B Class 20.00 278.00 R.Mtr 5560.00 14 S-2/2.6.1 P & F Pilllar Cocks (IS :8931 : 1993 Mark) of superior quality and approved make:C.P. Pillar cock, 15 mm dia nominal bore 1.00 779.00 Each 779.00 15 S-2/2.7.1 P & F Bib Cock (IS : 8931 Mark), Superior quality of approved make:Brass 400 gm,15mm nominal bore. 2.00 298.00 Each 596.00 (B) 2.7.3 C.P. Brass bib cock,15mm nominal bore. 1.00 590.00 Each 590.00 16 S-2/2.8.1 P & F Stop Cock (IS :8931 Mark), superior quality & of approved make:Brass 400 gm. 15mm nominal bore. 1.00 319.00 Each 319.00 17 S-2/2.11.1 P & F Ball Cock (IS :1703 Mark) with Rod & P.V.C. Ball complete :Brass wt. Not less than 300 gm,15mm. 1.00 314.00 Each 314.00 18 S- 2/233/2.12. 1 P & F Inlet Connection (Angle Valves) Superior quality, of approved make, for Wash basin, Gyser etc. C.P. Inlet connection 15mm.Brass (IS : 8931 marked) 2.00 501.00 Each 1002.00 19 S-2/2.13.1 P & F 15 mm. Dia Connection Pipe of approved quality/make :PVC pipe with C.P. Brass nuts upto length, 300mm 3.00 73.00 Each 219.00 20 S-2/2.14.9 P & F Flush Cock / Flush Valve (IS : 9758 Mark) for WC of approved quality make :Brass / Gun metal Half-turn wt. 1 Kg. of approved quality / make, 25mm nominal bore. 1.00 551.00 Each 551.00 21 S- 2/233/2.15. 1 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :Gun-metal 15mm nominal bore. 1.00 227.00 Each 227.00 22 S-2/2.15.3 P & F Full-way Valve (IS:778 Mark) or wheel valve of approved make :(-do-) 25mm nominal bore. 1.00 529.00 Each 529.00 23 S-2/2.26.3 P & F PVC Storage Tank ISI Marked (IS : 12701) indicating the BIS license No), of approved make with cover, 25mm dia 1M long G.I. over-flow pipe & 25 Cm. long wash out pipe with plug & socket, including making connection etc., complete of approved design: 500 (-do-) 1.00 3920.00 Each 3920.00 24 S-3/3.16.3 P&F rigid PVC Pipe (IS:4985 mark) class II/ (4 Kg. /Cm2.) approved quality /make including joining the pipe with solvent cement rubber ring and lubricant.110 mm dia 30.00 282.00 R.Mtr 8460.00 25 S-3/3.17.1 P&F rigid PVC pipe fittings (IS: 4985 mark) of approved quality /make including joining the pipe with solvent cement rubber ring and lubricant:Coupler (socket)110 mm dia 2.00 108.00 Each 216.00 (B) 3.17.2 Reducer 110 X 75 mm 110mm dia 2.00 97.00 Each 194.00 ( C ) 3.17.3 Plain Tee 110 mm dia 2.00 187.00 Each 374.00 (D) 3.17.8 Bend 110 mm dia 2.00 128.00 Each 256.00 (E) 3.17.9 Bend 87.5 110 mm dia 2.00 161.00 Each 322.00 (F) 3.17.12 Vent Cowel 110mm dia 2.00 56.00 Each 112.00 (G) 3.17.27 Gully trap 110mm dia 2.00 561.00 Each 1122.00 26 S-3/3.19.1 Construction of manhole in all type of soil inner size 90 X 60 Cm. 300 mm thick masonry in CM 1:6, 10 Cm. thick cement concrete 1:5:10 in foundation, 20 mm thick inside plaster in CM 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring, making channels, 80mm thick stone slab covering with 40mm thick M-15 grade C.C. flooring, Cement cover with frame of 450mm dia, earthwork etc. complete as per design including disposal of surplus earth within 50 mtr. lead.Depth up to 0.5 M 1.00 5489.00 Each 5489.00 27 S-3/3.21.1 Construction of chamber in all type of soil with 300 mm thick masonry in CM 1:6 m,10 cm thick C.C. 1:5:10 in foundation, 20mm thick insider plaster in Cm 1:6, finished with floating neat cement, 50mm thick M-15 grade C.C. flooring , earthwork etc. complete as per design including disposal of surplus earth within a lead of 50 mtr.Inside size 300 X 300 mm depth upto 0.5 M Cement cover with frame. 1.00 1049.00 Each 1049.00 28 S-3/1.36.3 P & F WVC Wash basin (Ist quality IS:2556 Mark) of approved make with C.I. brackets duly painted 1 No. 15 mm C.P. Pillar cock (IS:8934 Mark) & 32 mm C.P. brass waste coupling of approved make, P.V.C Waste pipe with PVC nut 32 mm complete including cutting & making good the wall :Size Size 550 mm x 400 mm 1.00 2598.00 Each 2598.00 G. Total Rs- 56637.00 Executive Engineer (Civil) Assistant Engineer (Civil) AVVNL Chittorgarh AVVNL Pratapgarh Part C S. No. BSR Ref. Particulars Qty. Rate Unite Amount 1 2 3 4 5 6 7 1 E-03/3.1.1 Wiring of light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper conductor 1.1 kV grade and 1.5 sq. mm nominal size FR PVC insulated unsheathed flexible copper earth conductor 1.1 kV grade (IS:694) on surface ISI marked ( IS:14927 P - II ) virgin material UPVC trunking & its accessories, Hot Dipped Galvanized Modular box of 1.2 mm thick with earth terminal/ Surface Moulded virgin material UPVC Modular Box , 10 A Modular switch,Modular face plate with grid plate, 3 pin ceiling rose/holder /3 way Connector, screws, making connections, testing etc. as required. For specification of copper Conductor, Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR Short point (up to 3 mtr.) 16.00 361.00 P.Pt 5776.00 (B) E-03/3.1.2 Medium point (up to 6 mtr.) 14.00 584.00 P.Pt 8176.00 (C ) E-03/3.1.3 Long Point (up to 10 mtr.) 12.00 814.00 P.Pt 9768.00 2 E-04/4.1.6 Supplying and drawing FR PVC insulated & unsheathed flexible copper conductor as per PWD specification for electrical Works with ISI marked (IS:694) and as per IS 8130 : 2013 of 1.1 kV grade . Wire should be made from 99.90 % purity copper, class 5 stranding in acc. to IS:8130/IEC 60228 for lower watt loss , oxygen free for less chances of oxidization, insulation PVC type A/C/D , flame retardant as per IS 10810-53, better amperage rating as per IS:3961 part 5, in existing surface or recessed PVC/ MS conduit/casing capping making connections with Copper Lugs of suitable size, Ferrules,testing etc. as required. OEM Must have its own in house NABL lab setup for all testing facilities for wires. For additional technical parameters of product / work refer Annexure A attached with this BSR 2 x 2.5 sq.mm 100.00 61.00 R.Mtr 6100.00 (b) E-04/4.1.11 2 x 4.0 sq.mm 60.00 93.00 R.Mtr 5580.00 3 E-03/3.3.1 Wiring of 3/5 pin 6 amp. Light plug point with 1.5 sq. mm nominal sizeFR PVC insulated unsheathed flexible copper conductor 1.1 kV gradeand 1.5 sq. mm nominal size FR PVC insulated unsheathed flexiblecopper earth conductor 1.1 kV grade(IS:694)on surface ISI marked (IS:14927 P - II ) virgin material UPVCTrunking & its accessories, HotDipped Galvanized Modular box of 1.2 mm thick withearth terminal/Surface Moulded virgin material UPVC Modular Box, modular 10A switch, 3/5 pin 6 A modular socket, Modular face plate with grid plate,screws, making connections, testing etc. as required. For specificationof copper Conductor, Phenolic Laminated sheets & Electrical/ Wiring accessories refer Chapter E - 04, E - 05 & E - 07 For additional technical parameters of product / work refer Annexure A attached with this BSR On board 10.00 389.00 P.Pt 3890.00 AJMER VIDYUT VITRAN NIGAM LIMITED Office of Assistant Engineer (Civil),Pratapgarh SCHEDULE G BSR-2022 Name of work:- Renovation work at Sub-Division(O&M), Choti Sadri E-07/7.37 Supplying and fixing of power plug point with Modular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thick with earthing terminal/connector on surface or in recessed with suitable size of modular face place with grid plate and cover plate including cost of ISI marked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet (IS:1293) making connection , testing , etc. as required. For specification of Wiring accessories refer Chapter E - 07 related item & For additional technical parameters of product / work refer Annexure A attached with this BSR 12.00 580.00 Each 6960.00 5 E18/18.12. 1 Providing & Fixing of IK08, IP 66 protected LED Street Light Luminaire on existing bracket/pole. Fixture made of powder coated single piece pressure die cast aluminum material with heat dissipation fins on housing with UV stabilized PC (UV stablization report submitted for UV cover ) /Toughened Glass cover and secondary lens on each LED & should be SMD type of 3 to 5 watt each . The System efficacy >=125 lm/ wt and potted driver & has a unique BIS R number with Input Voltage AC 120 to 270 V AC with High voltage Cutoff @>=300 V AC and Auto resetting Safety , Power Factor >0.95 driver Efficiency >85% ,THD(I) <10% Humidity 10% to 90% RH Working Temp -5C to 45C . driver current <750mA. The luminaire shall be BIS certified and Trade mark certified. Life Expectancy Equal or more than 50000 burning hrs with Minimum 70% lumen maintened , CRI >70 and CCT 5700K +355K. Surge protection shall be min ≥ 4 KV internal and min 10 KV external inside driver compartment. driver should be Phase to phase protection of 440 V for 4 Hrs. Manufactures Word Mark/Name Engraved/Embossing on die cast housing to allow traceability/authenticity. Fixture shall be AS PER IS 10322 Complianced.OEM Must have its own in house NABL lab setup for all testing facilities for LED fixtures. (LM79/LM80) Certificate/ report with liable warranty of product/accessories from OEM shall be submitted. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . LED Street Light fixture with Minimum lumen output 2450 lm 3.00 2554.00 Each 7662.00 6 E06/6.9.2 Providing & Fixing of Recessed/surface mounting heavy duty Enclosure made out from Galvanized steel / CRCA sheet not less then 1.2 mm thick conforming to IS-8623-1 & 3 / IEC 61439- 1 & 3. powder painted complete with din rail making internal DB terminations with copper lugs, detachable gland plate, including making connections, testing etc. as required.For additional technical parameters of product / work refer Annexure A attached with this BSR Suitable for Six / Eight module for MCB/ RCCB 2.00 1099.00 Each 2198.00 7 E- 06/6.2.1.2 Providing & Fixing of 240/415 V isolator ISI marked IS:13947-III/conforming to IEC 60947-3, suitable for AC22A utilizationcategory, 4KV impulse withstand voltage, true contact indication, Red colour dolly / lever shall have single mould covering over all poles for operation , two position din rail mounting, minimum phase termination capacity of 35sq.mm. IP 20 contact protection and fitted in existing distribution board / sheet including making connections, testing etc. as required. OEM shall have submit NABL/ CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge.For additional technical parameters of product / work refer Annexure A attached with this BSR Double pole isolator 63 A rating 2.00 453.00 Each 906.00 8 E- 06/6.1.1.2 Providing & Fixing of 240/415 V AC MCB with positive isolation of 10 kA breaking capacity (B/ C/D tripping characteristic as per type of load and site requirement) 4 KV impulse withstand voltage, ISI marked IS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limiting of class 3 as per IEC, minimum phase termination capacity of 35sq.mm. ,conductor line load reversibility , IP 20 contact protection and fitted in existing distribution board/sheets, minimum electrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above rating including making connections, testing etc. as required. OEM shall have submit NABL / CPRI / ERDA accrediated lab type test reports & All as per pre approved by Engineer in charge. For additional technical parameters of product / work refer Annexure A attached with this BSR Single pole MCB (With B/C curve tripping Characteristics 6 A to 32 A rating 8.00 187.00 Each 1496.00 9 E- 15/15.12. 1 Providing & Fixing of Heavy duty capacitor start, copper wound Double ball bearing 900/1400 RPM single phase Exhaust fan conforming to IS:2312 ISI marked in existing opening including making connections testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 300 mm sweep(900/1400 RPM) 2.00 3175.00 Each 6350.00 10 E- 17/17.11. 2 Providing & Fixing of IP 20 box made out from 1.2mm thick CRCA sheet steel with depth of minimun 30 mm and finished with powder coating and suitable for mounting LED tube including side covers, holders , internal wiring to illuminate the single sided connection LED tube. ( Without tube). All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . Suitable for 4 LED Tube shape fixture for single rod 12.00 227.00 Each 2724.00 11 E- 15/15.7.1 Providing & Fixing of BEE Star rated copper wounded double ballbearing capacitor start, aluminium body & Metallic blade ceiling fan Conforming to all the performance requirements laid down in IS 374:2019 including all amendments, as applicable ; & Carry BIS licensing (i.e. ISI marking) with down rod up to 80 cm with secondary support safety cable ( steel rope) , cotter pin with 3 x 1.5 sq.mm pvc insulated flexible copper conductor making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR .1200 mm Sweep BEE 1 Star rated (service value >=4.0 to < 4.5 ) 8.00 1890.00 Each 15120.00 12 E-07/7.26 Providing & Fixing of ding dong/musical chime bell as per PWD specification for electrical Works, including making connection testing etc. as required.All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR . 1.00 328.00 Each 328.00 13 E-07/7.24 Providing & Fixing of ISI marked surface type buzzer (IS:2268-1994) with CM/L no. printed including making connection testing etc. as required. All as per pre approved by Engineer in charge. For additional technical parameters of products/ work , refer Annexure A attached with this BSR .
