Tender For Supply And Installation Of Led Street Light Network In Dark Zone At I.A. Mathura Site-A - Supply & fixing 90W LED Street light having die cast aluminium body and diffuser with driver set suitable for 90 Watt confirming to IP 66 protection complete in all respect with surge protection device. Minimum CAT AA (Crompton/Philips with 5 year warrenty against defects,damaged & missing)Make: Crompton /Philips/Bajaj/Wipro) 2 Supply & fixing steel tubular pole 9.50 Metre long designated 410 SP-39 in 1:3:6 cement concrete foundation including excavation back filling etc. complete in all respect. 3 S/F of street light junction box made of SMC material complete with 4 way terminal block, cable gland etc. 4 S/F of 6 Amp to 32 Amp SP MCB (10KA) B curve 5 Supply & fixing 32mm dia,1.20M long GI bend pipe with 02 nos. clamp of 50x6mm MS Flat suitable for fixing street light on ST pole including cost of men and T&P. 6 S/E of D clamps of 38mm X 6mm flat iron for wall/ roof type service bracket with bolts, nuts etc, complete in all respects including painting with aluminium paint 7 Supply & fixing of 100 x 110 mm shackle insulator /100 x 80 mm pin insulator including G.I. Bolts/ spindle nuts etc.Complete in all respect. 8 Supply, sagging & tensioning of 6 SWG GI earth wire including cost of material, men and T&P 9 Supply & fixing insulated piercing connector set suitable for ABC cable/Insulated Conductor including cost of material,men and T&P. 10 Suppy,laying & drawing of3x1.5 Sq mm PVC insulated copper cable for Street/flood lights connection in existing pipe/surface/air as required including cost of material, men and T&P.(Havells/Polycab/Grandlay,KEI, Gloster) 11 Supplying and laying of 25 sq.mm 3.5 core aluminium conductor PVC insulated, armoured, served, sheathed cable 1100 V grade at a depth of 750 mm below ground level over a cushion of 75 mm thick sand alround and protected with burnt bricks on sides and on top complete in all respects. 12 Supply and laying of 16 sq mm 2 core aluminium conductor PVC insulated , armoured , served ,sheathed cable 1100 v grade in existing pipe/surface/pole etc.(Havells/Polycab/Grandley/Gloster) 13 Supply & fixing of 25 sq. mm 3.5 core cable socket/lug with insulated tape in cable termination complete in all respect. 14 Supply & fixing of 16 sq. mm 2 core cable socket/lug with insulated tape in cable termination complete in all respect. 15 Supply & fixing of 25 sq. mm 3.5 core brass nickle plated compression gland for PVC insulated cable complete in all respect. 16 Supply and fixing of brass nickle plated compression gland for PVC insulated & armoured served sheathed, underground cable including rubber ring etc. complete in all respect. The armouring of the cable shall be properly connected with the earth as per direction of ngineerIncharge.(Size 16 sq. mm 2 core) 17 Supply & fixing 40A TPN capacity of automatic street light cubical panel painted with anti corrosive alkali and acid proof paint consisting of digitel/time switch TSO 100 series with ML-3 contactors,HRC fuses/MCB/MCCB/ isolating switch metering instrument & instrument box with CTs etc or as directed . Design & material will be approved by Engineer in charge. 18 S/B of 40 mm dia x 4.5 mtr. long G.I. pipe vertically for earthing having 12 mm dia. Holes spaced 75 mm apart drilled upto 2 mtr. from the bottom complete with earthing lead of no.6 to 8 SWG GI wire in G.I.pipe upto appron upto switch board 30 cm square box with hinged cover masonary enclosure. Funnel of top, alternate layers of charcoal and salt at least 150 mm thick alround etc. as per direction E/I complete in all respect.(Approved make) 19 Providing & fixing 35mm x6mm G.I. earth strip on surface or in recess including cost of GI saddle/Al. Alloy/cadmium/PVC fastener etc.plated iron screw etc. as required for connections. 20 Supply and Laying of 63 mm HDPE/DWC pipe ( 750 mm below ) ISI marked through horizontal boring( trenchless )by making pit at regular interval and refiling the pit after work as before on road crossing including cost of all material , men and T&P , confirming to IS 14930 Part II (Road Crossing ). 21 Supply & Laying of 90 mm dia (OD-90 mm & ID-76 mm nominal) DWC HDPE pipe ISI marked along with all accessories like socket, bend,couple etc. confirming to IS 14930 Part-II complete with fitting and cutting, jointing etc. direct in ground (75 cm below ground level)including excavation and refilling the trench but excluding sand cushioning andprotective covering etc. complete in all respect 22 Supply & fixing of 50 mm dia GI pipe B classfor climbing up the cable from ground to over head LTlinepole/Metering point complete withGI fitting including material,labour and T&P. 23 Supply & fixing of 100 mm dia GI pipe B classfor climbing up the cable from ground to over head LTlinepole/Metering point complete withGI fitting including material,labour and T&P. 24 Supply & fixing MS clamp made out from 50x6mm MS flat for securing GI Pipe/HDPE with ST pole. 25 Supplyandinstallation,testing&commissioningofoutdoortypealuminiumwoundoilcooled transformer of ratings 25 KVA, 11/.04 KV on double pole including cost of base channel & holding clamps.complete as per IS-1180-2014 (Discom Approved Make) proper completion of work as per direction of Engineer in charge 26 Supply and erection of Double Pole structure consisting of 410-SP-56,11m long241 Kg complete steel tubular pole to be grouted as 1/6th of overall length below ground level with 45 cm dia cement concrete plinth around the pole & 45 cm above the ground level. The foundation of underground will not be less than 20 cm thick layer of cement concrete in the ration of 1:3:6 (cement : coarse sand : over burnt brick ballast/stone ballast). The brick ballast / stone ballast will be used of 1.25 cm size with stone pad of 30X30X7.5 cm at the base. The cost includes all men and material. 27 Supply & fixing of M.S Top channel of125x65x2240 mm including costof holding clamps and materials for proper completion of work as per direction of Engineer in charge 28 Supply & fixing of M.S channel of 100x50x2000 mm including cost of holding clamps and materials for proper completion of work as per direction of Engineer in charge 29 Supply & fixing of Straight M.S.channel 75X40 mm,2.24m long complete as per SIDC Sch.No.3(3)E36.01 30 Supply and fixing of 11KV TPMO Switch of 400 amps. Copmlete in all respect as per direction of Engineer in charge complete incuding all T&p, men and material required for proper completion. Stock Issue 2023-24, Item No. 92 (Annexure-I) 31 S/F of 11 kV three phase D.O. fuse set complete with suitable clamps, nuts & bolts, fuse wire etc. 32 Supply&fixxingof11KVdiscwithinsulatorwithgalvanisedinsulator,ballandsockettype complete with strain clamps nuts,bolts,washers,T&P men & material for proper completion of work as per direction of Engineer in charge 33 Supply &fixxing of11KVpinwithinsulatoronchannelarmfixedonST/DPincluding cost of nuts,bolts,washers,T&P men & material for proper completion of work as per direction of Engineer in charge 34 Supply & laying 70 sq mm 3 core Al. conductor XLPE insulated PVC bedded galvanised flat steel strip armoured, served, sheated cable 11 KV grade laid with existing DWC Pipe in ground. The armouring of the cable shall be properly connected with earth conductor by clamp etc.(Polycab/Havells/Grandlay/Gloster Make) 35 Supply and fixing ofjointing kit suitable for 70-120 sq.mm 3 core H.T.cable outdoor type with kit no. OT-5 including all materials,labour and T&P required for proper completion of work as per specification. 36 Supply and fixing of MS/GI clamp as per design suitable for fixing shackle insulator, made out for 50x6mm M.S. Flat including nut, bolt & washer. 37 Supply & erection of stay set at 3.5 Metres away from the pole complete with galvanised 19 mm dia x1.80 Metre long stay rod, 30 cm x 30 x 6.3 mm anchor plate, thimble stay clamps, stay insulator, 19 mm 600 mm double screw tightener, 7/3.5 mm G.I. stay wire etc. in 1:3:6 cement concrete complete in all respect. 38 Supply , Sagging & tensoning of overhead line with insulated ACSR weasel conductor including binding etc complete in all respects. 39 S/B of 600x600x6mm GI plate vertical for earthing with its top at least 3 M. below ground levelcomplete with20 mm dia. GI pipe and funnel for watering andone earthing leads of no. 8 to 10 SWG GI wire in 15 mm diaGI pipeupto switch board (from appron to switch board the cost of GI pipe snd GI wire be extra)30 CM square C.I. framewith hinged cover masonary housingalternate layers of charcoal /Coke and saltat least 150 mm thick alround etc. as per direction E/I complete in all respect as per drawing. 40 Supply,sagging,tensioning,jointing and binding of ACSR Weasel conductor including cost of aluminium tape binding wire and jointing sleeves complete in all respects including materiaI,men an T&P for proper completion of work . 41 Supply & Fixing of anti climbing device on ST pole by fabricated G.I. flat/bar in shope of ring having MS pointed fins foo 6mm dia of 25mmlength in 8nos. Including cost of all material, men and T&P as per direction fo E/I. 42 Cleaning & spray painting of ST bend pole and power ST Pole ( above 10 mtr height in case of shut down) with one coat of red oxide primerand two coat of aliminium paint/PU paint as per direction of Engineer incharge including cost of all material, men and Hydraulic cran,other T&P( Burger/Nerolac/Asian mark) 43 Painting letter ( Pole no. ) 2.5 cmm up to 8.0 cm size complete on street light pole/panel/other electrical properties under UPSIDA including cost of all material , men and T&P. UPPWD CIVILSOR Sch Item Mno.817, Ch-26 44 Supply & fixing of LED light Strip with driver on street light pole at central verge road no. 1 &2 including cost work T&P men and material complete in all respect. The LED strip should be in tri Colour as red, white and green (each colour 6 mtr.respectively.) With 01 Year warranty against defects/damage/missing. 45 Supply and wiring of sub main with 02 nos.of 2.5 sq.mm FRLSH PVC insulated 1100 V grade single core multistrand copper conductor cable in existing conduit complete with supply of all material labour and T&P required for proper completion of work as directed E/I 46 Fabrication, supply and fixing of work information board in M.S. frame made by 50mm dia Square Pipe of Stainless steel grade SS-304 & 16 mm thick base plate with back supporting of bracing by MS flat of 25x6mm and 2.85 Mtr long supporting leg made from 65mm pipe SS-304 grade with proper grouting arrangement. The board should be Retro reflective type in green color with white letters as required and shall be fixed at a height of 1.2 Meter from ground by providing 0.45x0.45x0.60 Mtr cement concrete stone pad as per drawing enclosed.The Borad Should be installed within 07 day of signing of Contract Boand.) 47 S/F of Danger Board for 11kv line
