|
| 1 | Excavation in trenches not exc 1.5m widthand not exc1.5 min depth and getting out forlaying of pipes etc in soft/loose soil . |
| 2 | Returning filling in including spreading levelling watering and ramming in layers not exceeding 25 cm in any type ofsoil. |
| 3 | Removing excavated surplus soil to a distance not exceeding50M where directed and at a level not exceeding 1.5 M above the starting point. |
| 4 | M & L for taking up cast iron (CI) / DI /GI water mains (including all fittings), with spigot and socket ends and lead joints of any size all as specified and dirercted by Engr-in-Charge ofsize 100 mm bore. |
| 5 | All as per ser item no 4 above but of size 150 mm bore. |
| 6 | All as per ser item no 4 above but of size 200 mm bore. |
| 7 | All as per ser item no 4 above but of size 300 mm bore. |
| 8 | Supply and lay DI pipe centrifugally cast of class K-7 with spigot and socket endssuitable for tyton jointsincluding rubber gasket for the following sizes 100 mm bore. |
| 9 | All as per ser item no 5 above but of size 150 mm bore. |
| 10 | All as per ser item no 5 above but of size 200 mm bore. |
| 11 | All as per ser item no 5 above but of size 300 mm bore. |
| 12 | Material and labour for fixing DI specialssuch as bends(any type, radius and angle),tappers any type, (straight, bend, increasing, decreasing or double socket etc) tee pieces single branch, \"Y\" junction, double branch, cross (all sockets or socket and spigot) collars, caps & plugs of sizes Upto 150 mm bore . |
| 13 | All as per ser item no 6 above but above 150 mm bore. |
| 14 | Supply and Fixing for DI sluice valve PN-1.6 incl new rubber gasket, nuts and bolts SS spindle etc and dismentling of existing unserviceable one of size 80 mm bore. |
| 15 | All as per ser item no 7 above but of size 100 mm bore. |
| 16 | All as per ser item no 7 above but of size 150 mm bore. |
| 17 | All as per ser item no 7 above but of size 200 mm bore. |
| 18 | All as per ser item no 7 above but of size 250 mm bore. |
| 19 | M&L for repair of CI/DI/GI pipe line of lead joints/push tyton rubber joint socket and spigot type taking up/down excavation, returning filling and removal of excavated soil near pipe line of size as 80mm borein break down maint of raising main line / distribution line. Providng any type of special tools & plants such as JCB, Hydra cranes, pumps & materials (such as lead, lead wool, detechable joints/ leak repair clamp suitable for CI/DI fittings,patsun/spun yarn, caller/short piece of pipes or any other fittings to be required to minimise the breakdown time and rectification of the problem as soon as posible. Rectification work must be start within two hours of intimation to contractor. Any delay in rectification may be penalised as deemed fit. Rate of excavation removing and returning filling willbe deemed to be included in the rate quoted by contractor. |
| 20 | All as per ser item no 8 above but of size 100 mm bore. |
| 21 | All as per ser item no 8 above but of size 150 mm bore. |
| 22 | All as per ser item no 8 above but of size200 mm bore. |
| 23 | All as per ser item no 8 above but of size250 mm bore. |
| 24 | All as per ser item no 8 above but of size 300mm bore |
| 25 | All as per ser item no 8 above but of size350/375mm bore |
| 26 | Supply and fix LRC joint /Detachable jointfor repairing the leakage of any type of joint forCI/DI pipe at spigot socket end andincl bailing out the line water as requiredand directed for sizes of 80 mm bore.Note :- Rate ofExcavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor. |
| 27 | All as per ser item no 9 above but of size100 mm bore. |
| 28 | All as per ser item no 9 above but of size150 mm bore. |
| 29 | All as per ser item no 9 above but of size 200 mm bore. |
| 30 | All as per ser item no 9 above but of size 250 mm bore. |
| 31 | All as per ser item no 9 above but of size300 mm bore. |
| 32 | All as per ser item no 9 above but of size350/375 mm bore. |
| 33 | Material and labour for repairing the leakage offlange end joints for MS/CI/DI pipe by doing welding incl replacement of rubber gasket, nut bolts etcbailing out the line wateras requiredand directed for the of size150 mm bore.Note :- Rate ofExcavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor. |
| 34 | All as per ser item no 10 above but of size200 mm bore. |
| 35 | All as per ser item no 10 above but of size 250 mm bore. |
| 36 | Taking up or down steel tubing/HDPE pipes alongwith fittings such as tee, bends etc and connections incl removal from site ofsize 15mm bore. |
| 37 | All as per ser item no 11 above but of size20mm bore. |
| 38 | All as per ser item no 11 above but of size25mm bore. |
| 39 | All as per ser item no 11 above but of size40mm bore |
| 40 | All as per ser item no 11 above but of size50mm bore. |
| 41 | All as per ser item no 11 above but of size80mm bore. |
| 42 | All as per ser item no 11 above but of size100mm bore. |
| 43 | M&L galvanised iron pipe medium grade (ISI marked) with and includingfittingsmedium grade (ISI Marked)concealed or fixed to walls, celling or laid in floors including chase cuttings where required, making good to distributed surfaces as per existing as directed and specified of size15mm bore:- Note: Cost of cutting/leaving/forming chases, holes etc through walls, floor, plinth protection, roof etc as required and making good the surface to match as per existing shall deemed to be included in quoted rate by the tenderer.. |
| 44 | All as per ser item no 12 above but of size20mm bore. |
| 45 | All as per ser item no 12 above but of size 25mm bore. |
| 46 | All as per ser item no 12 above but of size50mm bore. |
| 47 | Supply and fixing of galvanised iron pipe medium grade (ISI marked) with and including fittings medium grade (ISI Marked)laid in trenches jointed and tested complete all as specified and directed of size15mm bore. |
| 48 | All as per ser item no 13 above but of size20mm bore. |
| 49 | All as per ser item no 13 above but of size 25mm bore. |
| 50 | All as per ser item no 13 above but of size 40mm bore |
| 51 | All as per ser item no 13 above but of size50mm bore. |
| 52 | All as per ser item no 13 above but of size80mm bore |
| 53 | All as per ser item no 13 above but of size100mm bore |
| 54 | Supply and fixgun metal gate valve ball type with iron iron handle screwed both ends for iron/GI pipeand fixed of size15 mm dia incl taking down and removal from site. Make: Zoloto, Sant, Normax,Jinko . |
| 55 | All as per ser item no 14 above but of size20 mm dia. |
| 56 | All as per ser item no 14 above but of size25 mm dia. |
| 57 | All as per ser item no 14 above but of size50 mm dia iron wheel head. |
| 58 | Dismentling of stone massonary valve chamber of any size and pattern and at any position and construction of valve chamber with PCC foundation 1:4:8 type D2 using 40mm graded stone aggregate PCC block 20 cm thick wall massonary built in cement mortar 1:6 with plastering of 10mm thickness internally and 15mm thickness externally above and below ground level with PCC 1:2:4 type B1 using 20mm graded stone aggregate inclframe made of angles iron of size matches with the internal size of the valve chamber and chamber cover made of MS sheet of 3.0mm thickness incl MS hinge and painting the steel surfaces with two coats of synthetic enamel paint over a coat of red oxide primer incl necessary earth work, excavation etc all as specified and directed by Engr-in-Charge of the size1050 x 1200 x 1000mm |
| 59 | All as per ser item no 15 above but of size900 x 600 x 1000mm |
| 60 | All as per ser item no 15 above but of size450 x 450 x 600mm |
| 61 | All as per ser item no 15 above but of size 2500 x 2200 x 1500mm and PCC bolck wall thickness 30 cm |
| 62 | Material and labour for clamp made of MS flat of size 50x6 mm with nuts & bolts forconnection from existing 50-200 mm bore CI/GI pipe line by providing 15 to 50mm bore socket complete incl welding, nuts bolts, rubber sheet etc all as directed by Engr-in-Charge at site. |
| 63 | S&F in replacement of u/s PVC float valve , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 20 mm bore. |
| 64 | S&F in replacement of u/s PVC float valve , high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule of size 25 mm bore. |
| 65 | S&F in replacement of u/s gate lock padlocks/round padlock 65mm 8 leaver with 3 keys mild steel material, bright chrome polished finish complete all as directed. |
| 66 | Material and labour for laying of pipe of size 15mm to 200mm bore under road crossing by trenchless technology by aguring or mechnical means.in any type of soil. |
| 67 | M & L for road cutting and repairing the same with road patch material width upto 75 cm all as specified and directed by EIC.Note: Road repair work shall be completed the same day of work execution in all aspect, failing which a panelty of Rs 100 per meter for per hour delay will be imposed and deducted from RAR/Final Bill. |
| 68 | M&L PCC (1:2:4) type B-1 (using 20 mm graded stone aggregate) in support of pipes or foundationof pump complete all as directed. |
| 69 | M&L 15 mm thick cement plaster in cum (1:6) on brick/stone/PCC surface fair and even complete all as directed |
| 70 | S&F CI foot valve threaded/flanged as required size of 50mm bore. Make: Kartar, Sant, Normax, Kirloskar (ball type) |
| 71 | All as per ser item no 24 above but of size80mm bore. |
| 72 | All as per ser item no 24 above but of size100mm bore. |
| 73 | All as per ser item no 24 above but of size150mm bore. |
| 74 | All as per ser item no 24 above but of size200mm bore. |
| 75 | S&F CI Non Return Valveofof size150mm bore. Make: Kartar, Sant, Normax, Kirloskar |
| 76 | All as per ser item no 25 above but of size200mm bore. |
| 77 | Supply and fixing for CI Butterfly valve (ISI Marked) size 150 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc including and dismantling of existing unserviceable complete all as specified and as directed. Make: Normex, Kartar, Sant |
| 78 | Supply and fixing for CI Butterfly valve (ISI Marked) size 80 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc including and dismantling of existing unserviceable complete all as specified and as directed. Make: Normex, Kartar, Sant |
| 79 | Supply and fixing for CI Butterfly valve (ISI Marked) size 200 mm bore PN-1.6 incl new rubber gasket, nuts and bolts etc including and dismantling of existing unserviceable complete all as specified and as directed. Make: Normex, Kartar, Sant |
| 80 | M&L for painting of Valve Chambar plaster portion with cement base and steel portion with synthetic enamel paint of any size. |
| 81 | Taking down carefully spindle of cast iron sluice valve of size 80mm boredismantling parts and reassembling by replacement of newbrass spindle suitable for 80mm dia sluice valve, class PN 1.0, and refixing in original position including provision of nuts, bolts, washers, rubbers gaskets etc complete all as specified and as directed at site. |
| 82 | All as per ser item no 30 above but of size 100 mm bore |
| 83 | All as per ser item no 30 above but of size 150 mm bore |
| 84 | All as per ser item no 30 above but of size 200 mm bore |
| 85 | All as per ser item no 30 above but of size 250 mm bore |
| 86 | All as per ser item no 30 above but of size 300 mm bore |
| 87 | M&L for painting of sluice valve/NRV upto 100mm dia as per existing colour complete all as specified. |
| 88 | M&L for painting of sluice valve/NRV 150/200mm dia as per existing colour complete all as specified. |
| 89 | S&F DI air release valve with two air outlets, 50mm dia bore and fixing up in cast iron/ DIwater supply mains |
| 90 | S&F DI air release valve with two air outlets, 80mm dia bore and fixing up in cast iron/ DIwater supply mains |
| 91 | Taking up raising/ delivery DI/GI water mains 50/80mm bore (including all fittings), with flanged or spigot and socket end with tyton joints/ gasket/socket with nut bolts & washers of any size and relaying the same with using new gasket / tyton/socket jointcomplete all as specified and dirercted by Engr-in-Charge.Note :- Rate ofExcavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor. |
| 92 | Taking up raising/ delivery DI water mains 100mm bore (including all fittings), with flanged or spigot and socket end with tyton joints/ gasket with nut bolts & washers of any size and relaying the same with using new gasket / tyton jointcomplete all as specified and dirercted by Engr-in-Charge.Note :- Rate ofExcavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor. |
| 93 | All as per ser item no 36 above but of size 150 mm bore |
| 94 | All as per ser item no 36 above but of size 200 mm bore |
| 95 | All as per ser item no 36 above but of size 300/350 mm bore |
| 96 | Taking out/up 150/200/250mm size of distrbution header tee, bend at varoius pump house/OHT and relaying/refixing the same with using new gasket / tyton jointcomplete all as specified and dirercted by Engr-in-Charge.Note :- Rate ofExcavation and earth work returning filling and removing shall be deemed to be included in the rate quoted by contractor |
