Tender For Providing And Fixing Rcc Slab, Aluminium Cupboards, Water Supply And Drainage Connection For Chemistry Lab At Nit Hamirpur (H.P).
Tender Value
2.47 Lakhs
Estimated cost
Bid Submission
03 Jun 2025
0 days left
EMD
5000
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
hamirpur → Himachal Pradesh
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Tender For Providing And Fixing Rcc Slab, Aluminium Cupboards, Water Supply And Drainage Connection For Chemistry Lab At Nit Hamirpur (H.P).
BOQ
| Sl. No. | Item Description |
| 1 | (CIVIL WORK)Centering and shuttering including strutting, propping etc. and removal of form work for :- including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 2 | Shelves (Cast in situ) |
| 3 | Edges of slabs in floors and walls.including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 4 | Edges of slabs and breaks in floors and walls |
| 5 | Reinforced cement concrete work in beams, suspended floors, roofs having slope up to 15° landings, balconies, shelves, chajjas, lintels, bands, plain window sills, staircases and spiral stair cases above plinth level up to floor five level, excluding the cost of centering, shuttering, finishing and reinforcement with 1:1.5:3 (1 cement : 1.5 coarse sand(zone-III) derived from natural sources : 3 graded stone aggregate 20 mm nominal size derived from natural sources). |
| 6 | 1:4:8 (1 Cement : 4 coarse sand (zone-III) derived from natural sources : 8 graded stone aggregate 40 mm nominal size derived from natural sources)including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 7 | Steel reinforcement for R.C.C. work including straightening, cutting, bending, placing in position and binding all complete above plinth level.including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 8 | Thermo-Mechanically Treated bars of grade Fe-500D or more. |
| 9 | Half brick masonry with common burnt clay F.P.S. (non modular) bricks of class designation 7.5 in foundations and plinth inincluding entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 10 | cement mortar 1:4 (1 cement : 4 coarse sand) |
| 11 | 15 mm cement plaster on the rough side of single or half brick wall of mix including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 12 | 1:4 (1 cement: 4 fine sand) |
| 13 | Providing and fixing 10mm thick acid and/ or alkali resistant tiles of approved make Kajaria , Somany , AGL. and colour using and / or alkali resisting cement mortar bedding of 10mm thick cement mortar 1:4 (1 acid proof cement :4 coarse sand), joints filled with acid and/ or alkali resisting cement in flooring, dado/ skirting as per IS :4457, complete. as per the direction of Engineer-in-charge.including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 14 | In flooring on a bed of 10 mm thick mortar 1:4 (1 acid proof cement : 4 coarse sand) |
| 15 | Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make,Kajaria , Somany , AGL. in all colours, shades except burgundy, bottle green, black ofany size as approved by Engineer-in-Charge, in skirting, risers of stepsand dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm,including pointing in white cement mixed with pigment of matching shade complete. including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 16 | Providing and fixing aluminium handles125 mm, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade, with necessary screws etc. completeincluding entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 17 | Providing and fixing aluminium tower bolts,100 mm X 10 mm ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete including entire carriage of materials with in all leads, lifts, height and cost of all other incidentals. |
| 18 | Providing and fixing white vitreous china laboratory sink Size 600x450x200 mmwith C.I. brackets, C.P. brass chain with rubber plug, 40 mm C.P brass waste and 40mm C.P. brass trap with necessary C.P. brass unions complete, including painting of fittings and brackets, cutting and making good the wall wherever required : including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals . |
| 19 | Providing and fixing 3 way Lab tap /Faucet(SH-233C of Tech Safe os its equivalent ), brass electroplated, chemical resistant, table mounted with nozzle arrangement complete including entire carriage of material in all leads and lifts. |
| 20 | Providing and fixing CP Waste Coupling for wash basin and sink, of approved quality and colour.32 mm diaincluding entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 21 | Providing and fixing P.V.C .Flexible pipe. 32 mm diawaste pipe for sink or wash basin including P.V.C. waste fittings complete. Make:- Aspral, prince, finolex.including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 22 | Providing and fixing 15mm nominal bore C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 Make:- Parryware, Hinwere. including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 23 | Providing and fixing 15 mm dia nominal bore G.I. Pipes complete with G.I. fittings and clamps, i/c making good the walls etc. concealed pipe,including painting with anti corrosive bitumastic paint, cutting chases and making good the wall Make :- Jindal, Tata. including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 24 | Providing and fixing15 mm nominal bore ball valve (brass) of approved quality, High or low pressure, with plastic floats complete : Make:- Zoloto. including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 25 | Providing and fixing Anti Acid pipes 100mm dia in flooring or on walls with clamps at 1.00m spacing including floor trap collar, bends and other necessary fittings compleet as required. including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 26 | Providing and fixing C.P.100mm grating with or without waste hole including cost of all other incidentals including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 27 | Providing and fixing 150 mmoxidised M.S. hasp and staple (safety type)conforming to IS : 363 with necessary screws etc. complete : including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 28 | Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead.For thickness of tiles 10 mm to 25 mm. including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 29 | Fixing aluminium work for fixed portion, doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing / panelling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing,paneling and dash fasteners to be paid for separately) Make :- Jindal, Hindalco, Nalco. including entire carrige of materials with in all leads, lifts, height and cost if all other incidentals. |
| 30 | (Elecrical Work)Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed medium class PVC conduit including copper thimble as required at site/ as directed by Engineer in-charge .Make :Havells / Plaza /KEI / Helonix. |
| 31 | 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire |
| 32 | Supplying and fixing following modular switch/ socket on the existing modular plate & switch box including connections but excluding modular plate etc. as required..Make :-Havells / Plaza / KE I/ Helonix. |
| 33 | 5/6 amps switch |
| 34 | 15/16 amp switch |
| 35 | 3 pin 5/6 amp socket outlet |
| 36 | 6 pin 15/16 amp socket outlet |
| 37 | Supplying and fixing following size/ modules, GI box alongwith modular base & cover plate for modular switches in recess etc as required..Make :-Havells / Plaza /KEI /Helonix. |
| 38 | 3 Module (100mmX75mm) |
| 39 | 12 Module (200mmX150mm) |
| 40 | Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, \"C\" curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required..Make :-Havells/Plaza / KEI / Helonix. |
| 41 | Single pole |
AI Tender Summary
Tender Timeline
May 14, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedJun 03, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 04, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
Completed