|
| 1 | Earthwork excavation above water level in light or sandy soil for infiltration gallery, syphon or connecting pipeline and connected works including refilling complete.First depth of 2 m |
| 2 | Second depth of 2 m |
| 3 | Third depth of 2 m |
| 4 | Fourth depth of 2 m |
| 5 | Fifth depth of 2 m |
| 6 | Dry rubble masonry using new stone including simultaneous pointing of the export surface and all incidental charge such as bailing out water etc complete, Scaffolding curing fishing complete with standard specification. |
| 7 | Random rubble masonry in cement mortar 1:5 mix (one part of cement and five part of sand) using new best rough and bond stones from approved quarry including cost and conveyance of all materials to site. Loading and unloading charges and labour charges for mixing, laying and curing etc complete complying with standard specifications. |
| 8 | Supplying and erecting centering to sides and soffits including supports and strutting with necessary centering for soffits upto 3 meter height using mild steel sheet of size 90 cm x 60 cm x 10 mm gauge with MS angles of size 25mm x 25mm x 3mm laid over silver oak (CW) joists of size 10cm x 6cm spaced upto 90cm c/c and casurina props or 10 cm to 13 cm dia spaced at 0.750 cm c/c complying with standard specifications as per TNDSS NO : 30 & 86. |
| 9 | Supplying, fabricating and placing in position of Steel Reinforcement using Mild steel or ribbed tar steel rods, for all RCC works as per the design given by the departmental officers including cost of steel cutting, bending, placing in position and binding with binding wire and all labour charges for cutting, bending, tying and placing in position etc, complete. TNDSS No:97 |
| 10 | Reinforcement Cement concrete 1:1½:3 (one part of cement one and a half part of sand and three part of aggregates) using machine broken granite jelly of 20 mm size for all reinforced cement concrete works excluding cost of centering shuttering strutting and also cost of reinforcement grill in position but including laying vibrating with mechanical vibrators using finishing etc complete, as directed by the departmental officers etc complete complying with standard specification. TNDSS No:30 |
| 11 | Supplying, fabricating, erecting structural steel trusses work for roofing welded or bolted type using necessary mild steel rectangle and square box sections etc each according to given design conforming to IS specification. It includes cutting, welding, conveyance of all materials to work site, primer coating and enamel painting and approved by the departmental officers etc complete as per standard specification. |
| 12 | Supplying and fixing of roofing with galvaline Sheet 0.47 mm thick of approved quality by drilling hole (and not by punching) with necessary J/U bold and nut of 8 mm Ø of suitable length providing one set of bitumen washer at 25 mm Ø and 1.60 mm thick for each bold and nut including protruding portion of bold and nut shall be covered with bitumen compound etc complete complying with standard specification and as directed by Engineer incharge. |
| 13 | Providing and fixingwall cladding made up of 3mm thick aluminum composite panel of ALTOBOND make over the wall using aluminum section at 600mm c/c horizontal and vertical both way using aluminum sheet of required length cut from 12mmX 12mm \"L\" angle of medium fxed to the term using A/16 pan head screws granted with 50mm PVC raw plug to plum level filling uniformly formed groove of 15mm thick with weather proof slicon of DOW CORNING make thermo foam packed inside the grooves etc.complete as per Standard specification and as directed by the departmental officers.(as per the Quotation rate). |
| 14 | Supplying and Fixing of Aluminium Dye Cast Letters 9\" of approved size and colour. The colour treatment process is achieved with MRF colour coat and then the processed coloured layer is set into the kiln for the heat treatment process for the following sizes (M-0692) |
| 15 | Supply and delivery of 1.5 HP submersible pump set having a duty condition of 20 lpm discharge against head of 125 metre confirming to IS specification with ISS marking suitable for installation panel board including cost of all materials and all conveyance charges etc complete as per standard specification. |
| 16 | Supply and delivery of wall mounting type control panel board of Ammeter, Voltmeter single phase prevents insulator-indicating lambs, STAR DELTA / DOL starter. Suitable for 1.5 HP suitable certificate pump set including all charges. |
| 17 | Cement concrete of mix 1:4:8 (one part of cement four part of sand and eight part of aggregates) using 40 mm gauge machine broken granite stone jelly for foundation including de watering if found necessary and laid in layers of not more than 15 cm thick well rammed and consolidated etc complying with standard specification. TNDSS No:28 |
| 18 | Paving floor with colour ceramic tiles of size 200 x 200 x 6 mm in all floors over the base layer of cement mortar 1:3 (one part of cement three part of sand) 20 mm thick pointed with white cement at 0.40 kg/m2 including finishing the joints etc complete, as directed by the departmental officers (The rate should be exclusive of cost of flooring concrete 1:5) special |
| 19 | Wiring with 2 x 1.5 sq.mm.PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessorieswith TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil) SD 22 |
| 20 | Supply and fixing of 1200mm (48\") AC ceiling fan complete with stepped electronic 300W regulator with 1 meter down rod on the existing clamp SD 107 |
| 21 | Wiring with 2 x 1.5 sq.mm.PVC insulated unsheathed FRLS SC copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessorieswith TW switch box with 5A FT switch inflush with wall covered with hylum sheet of 3mm thick with painting of suitable colour for open PVC light / fan point (for electronic regulator) (5 points per coil) SD 22 |
| 22 | Supply and fixing of 65mm dia GI pipe (Class \"B\") of 4 metre length with 300mm x 300mm x 6mm MS base plate duly welded at the bottom and with concreting and construction on masonary pedestal with MS box of 30cm x 20cm x 10cm with angle iron frame work with door with lock and key arrangementsand with supply and fixing of 25 W LED street light fitting with bulb and with supply and fixing of 16A fuse unit (500V), 5A SP switch inside the MS box and painting with suitable colour SD 98 |
| 23 | Wiring with 2 x 1.5 sq.mm.PVC insulated SC unsheathed FRLS copper conductor of 1100V grade in suitable PVC rigid pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box in flush with wall with 3mm thick hylem sheet cover for 5A 3 pin non inter locking wall socket with 5A flush type switch with painting of suitable colour with continuous earth wire connection of 1.5 sq.mm copper wire for open PVC plug point SD 37 |
| 24 | Wiring with 2 x 4 sq.mm.PVC insulated SC unsheathed FRLS copper conductor cable of 1100V grade in suitable pipe on wall and ceiling with PVC accessories with 150mm x 100mm x 113mm TW switch box for 15A 3 pin non inter locking wall socket with 15A flush type switch with paintingof suitablecolour with continuousearth wire connectionof 4 sq.mm copper wire for open PVC power plug point SD 39 |
