Tender For Road Construction Work With Drain And Interlocking Tiles From Anil Tyagis House To Haider Sahabs House In Ward Number-16, Baghpat-Uttar Pradesh
TDR : 49133204
Tender Notice
BOQ
Expired
Baghpat
Uttar Pradesh
Tender For Road Construction Work With Drain And Interlocking Tiles From Anil Tyagis House To Haider Sahabs House In Ward Number-16
Name of Work: वार्ड संख्या 16 अनिल त्यागी के मकान से हैदर साहब के मकान तक तक नाली एवं इंटरलॉकिंग टाइल्स }kjk lMd निर्माण कार्य A
Sl. No.
Item Description
1
Earth work in cutting or in embankment in ordinary soil excavation to be in the form of regular pits not exceeding 0.50M. in depth and earth work in embankment to be in 20 cm.layers including remming and dressing the surface to requiredlevels and slopes and also including 1.50 M. lift and 30 M.lead. The earth from cutting to be used in making embankmentor to be deposited as spoil banks with-in 30 M. distance asdirected by the Engineer incharge
2
P/L GSB by providing well graded material spreading in uniform layers with motor grader on Prepared surface mixing by mix in place method with rotavator at OMC and compacting with smooth wheel roller to achieve the desired density as per MORD
3
M-150 Brick work in one cement and Four C Sand (1:4 ) in foundation and plinth including supply of all materials labour, T&Petc. Reqd. for proper completion of the work (SI No 305a)
4
12 mm thick cement plaster with cement and corse sand mortar 1:4over brick work thickness not less than 1 cm including supply of all materials labour Tools & Plants etc. reqd. fpr proper completion of the work. (SI No 584a)
5
Cement Concrete with 2 cm gauge approved stone ballast, coarse sand & cement in the proportion of 4:2:1 includng supply of all materials, labour, Tools& plants etc. required for proper completion of the work.(Si No 279a)
6
Supply of 80mm thick Precast cement concerete I-Shape\"Interlocking paver blocks ISI mark confirming to IS: 15658-2006 with top layer of minimum 5 mm thickness having plan dimension 200x(160+120mm) of O.P. Cement , smooth high gloss finish, skid resistant; manufactured from rubbermoulds through vibro-compression mechanism. The compressive strength of concrete paver block shall not beless than 40Mpa and weight 4.5kg per including cost of material, with a blanket layer of 4.00cm. thick fine sand.including labour, T & P etc required for proper completion of the work as directed by Engineer-in-charge.(new item B)
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
