Supply , Fixing Andcommissioning Universal Testing Machine(Utm)-1000Kn Capacity At Regional Laboratories In Pwd Raj , Supply , Fixing & Commissioning Universal Testing Machine(Utm)-1000Kn Capacity , Supply, Fixing& Commissioning Of Universal Testing Machine (Utm) Of 1000 Kn Loading Capacity With 6 Pillar Structure With Hydraulic Jaw Gripping And Servo-Controlled Motion. The Machine Shall Be Supplied Complete With Industrial Pc Core I5 With Software And Laser Printer And Preferably Floating Remote To Operate The Machine. The Machine Shall Have Tension, Compression , Transverse Bend And Rebend Test Arrangements. The Machine Shall Be Capable To Conduct 0.2 % Proof Stress Test With Electronic Extensometer, Shear Test, Flexure Beam Test And Various Other Specified Attachment Enabled. Salient Features Of Utm And Its Technical Specifications Shall Be As Under :- Servo Controlled System :- Three Mode Controlled, Displacement Rate Control , Load Rate Control, Strain Rate Control. System Shall Have Smooth, Accurate And Auto Load Rate /Strain Rate Control Withspecially Designed Software With Closed Loop Pid Control To Control The Utm From Pc. Micro Proccessor Based Measuring System :- Window Based Software With High Speed Data Acquisition & Interface Card. Data Base Backup & Restore Facilities. Elongation With Resolution 0.01Mm When Extensometer Is Used And Displacement With Resolution 0.1Mm When Encoder Is Used. There Shall Be Provision For Calulating Uts Value, % Elongation, Max Force, % Area Reduction And Breaking Load Etc. Alongwith Built-In Facility To Print Test Results And Various Graphs As Load V/S Elongation, Load V/S Displacement, Stress V/S Strain, Proof Test And Yield Etc. There Shall Be Atleast 20,000 Test Data Storage And Report Printing Facility. Accuracy /Calibration :- Machine Shall Be Capable To Perform Tests As Per Is:1608(P-I):2022, Is:1786-2008 And It Shall Have Accuracy Of ± 1% For Utilization Of Its Entire Range. Machine Will Be Made Available Calibrated As Per Requirement Of Class-I, Is 1828(P-I) : 1991. Technical Specification Of Utm :- Max. Capacity - 1000 Kn,Structure Type- 6 Piller Structure With Hydraulic Jaw Grips,Control & Motion - Servo Control With Electro- Hydraulic Value With Designed Software. Load Resolution - 0.10 Kn, Load Measurement Accuracy - ± 1% Of Value(From 2-100 % Range), Load Rate Setting Range - 0.1 Kn - 10Kn/Sec., Displacement Measurement - By Mean Of Rotary Encoder. Displacement Resolution - 0.01 Mm, Extensometer Resolution - 0.001 Mm, Clearance Range For Tensile Test - 50-800 Mm, Clearance Between Column - 540 Mm Or More, Ram Stroke - 200Mm, Straining /Piston Speed At No Load - 0-80Mm/Min., Power Requirements - To Min. 3 Kw, Power Supply - 440 V , 3 Phase , 50Hz. Ac Supply Accessories :- For Tensile Test:- Clamping Jaws For Round Specimens - 8-15Mm, 16-25Mm, 26-40 Mm. ,Clamping Jaws For Flat Specimens - 0-40 Mm For Compression Test:-Pair Of Compression Plate With Dia - 200Mm For Transverse Test:-Table With Adjustable Roller - 160 Mm, Width Of Roller - 160 Mm, Dia Of Roller - 50 Mm, Max. Span Between The Roller (Adjustable) - 800 Mm, Radius Of Punch Top - 16, 22 Mm, For Bend /Re Bend Test:- - Mandrel As Per Is 1786
