Tender For Development Of Shahid Smark At Shahid Park, Pali. - Demolishing Stone Rubble Masonry Manually/ By Mechanical Means Including Stacking Of Serviceable Material And Disposal Of Unserviceable Material Within 50 Metres Lead As Per Direction Of Engin, pali-Rajasthan

Tender For Development Of Shahid Smark At Shahid Park, Pali. - Demolishing stone rubble masonry manually/ by mechanical means including stacking of serviceable material and disposal of unserviceable material within 50 metres lead as per direction of Engineer-in-charge:In cement mortar.l.14.9.2 2 Earth work in excavation by mechanical means (Hydraulic excavator )/ manual means over areas (exceeding 30cm in depth. 1.5m in width as well as 10 sqm on plan) includingdisposal of excavated earth, lead upto 50m and lift upto 1.5 m ,disposed earth to be levelled and neatly dressed : All kinds of soil.1.6 3 Providing and laying in position cement concrete including curing compaction etc. of specified grade excluding the cost of centering and shuttering All up to plinth level IS 456-2000:1:5:10 (1 cement : 5 coarse sand : 10 graded stone aggregate 40mm nominal size).3.1.7 4 Random Rubble stone masonary for foundation and plinth in Cement Sand Mortar above 30 Cm. thick wall IS 1597 (Part-I) 1992 in :Cement Mortar 1:6 (1-Cement:6-Sand). 6.1.6 5 Random Rubble stone masonry with hard stone in superstructure above plinth level and upto five level above 30cm. thick walls in ::Cement Mortar 1:6 (1-Cement:6-Sand). 6.2.6 6 Supplying and fixing Jodhpur machine cut stone Kadau in CM 1:4 with rock facing with proper projection and machine cut edges of stone, two line dressing of building corners, jambs etc. including uniform joints using aluminium square section of size 12 mm to 15 mm as per requirement of course and width of stone not less than 12 Cm., with reqisite humber headers (minimum length of sotne 0.9 M) 6.87 (ii) 7 Pointing on stone masonry in cement sand mortar 1:3 (1 cement : 3 sand) :Deep groove pointing12.31.3 8 Plaster on new surface on walls in cement sand mortar 1:4 including raking of joints etc. complete fine finish: 25 mm thick. 12.2.1 9 Supply and fixing Jodhpur sand stone Machine cut Dash, Coping,sill,lintel fixed in cement sand mortar 1:4.9 cm (3.5) thick6.88 II 10 Supplying and fixing Red ashlar railing ordinary with takia and thambli complete fine dressed Red Ashlar three line dressed 6.43 I 11 Providing & Installation of White ashlar stone Carved perforated Jali 50 to 70mm thick with height 600mm and length not exceeding 1250mm with pillar 900mm long with groove cutting etc. complete as per direction of Engineer-incharge (excluding cost of providing & fixing dassa) 12 Flooring with Cobble stone of approx. Size 125x125x75 mm (thick) laid on 25 mm average thick cement mortar 1:3 ( 1 cement : 3 Coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the stone, laid in approved pattern complete in all respect as per direction of Engineer-in-charge. 13 Providing and fixing steel gate, grating , and grills made of angles, tees, square bars, flats,or black pipe with holdfast and fittings complete as per design and drawing including cutting welding and fabrication with priming coat of red oxide Extra if square,rectangular hollow tubelar sections are used or grill made by flats only 9.8.1 14 Finishing walls with Acrylic Smooth exterior paint of required shade including all scaffolding.New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including base coat of water proofing cement paint applied @ 2.20 kg/ 10 sqm ). 12.42 15 Labour charges for soorsagar or equivalent white Ashlar stone coping 15 Cm. thick with cutting, moulding and dressing as per old M.G.H. pattern 6.70 16 Labour charges for providing 8 to 10 cm. Gola with animar dressing as per old M.G.H. pattern on white Ashlar 6.69 17 Brick work with modular F.P.S. bricksconforming to IS:12894-2002, class designation 100 average compressive strength in super structure above plinth level upto two stories in :Cement mortar 1:6 (1 cement : 6 Coarse sand) 18 Supply & fixing of one side polished black granite/white marble stone 14-20mm thick of size 3x2 with engraved and gold colour painted letters (upto 500 letters) & borders including dismatalling plaster for fixing stone and finishing the surface including cost of stone and other material, carriage, loading, unloading with all leads & lifts as per direction of Engineer Inchagre. 19 Providing and Fixing Gun insas with soldier Helmet (Rifle with helmet) of 4.5- 5 feet of High Quality fiber with copper gold high coated color including fixing in Cement concrete with complete installation as per EIC. The design and drawing is attached .

INR 500 /-

INR 30000.0 /-

INR 15 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB