Maintenance Repairs To Steel Furniture At Naval Station, Bheemunipatnam; 1 Material & labour for Removing existing paint of any description both inside & outside by paint removing agent / scrapper or by caustic soda or by any other means without damaging surfaces, filling holes, welded joints with putty and finally rubbing with sand paper / abrasive cloth thoroughly for smooth and clean surface free from dust and applying two coats of synthetic enamel paint of smoke grey colour by Spray Machine complete all as shown on drawings and as directed. 2 Almirah Large Steel with Shelves [FD – 67 / FD – 339 / FD – 1031] 3 Almirah Small Steel with Shelves [FD – 67 / FD – 340 / FD – 1032] 4 Almirah Steel Large [FD / E6 / MAP / 18] 5 Almirah Steel Medium [Wire Gauge Front] [FD – 115] 6 Almirah Steel Medium [Cabinet] [FD – 115] 7 Almirah Steel Large with Selves 1855X910X480mm [TP] 8 Almirah Steel Medium with Selves 1155X760X430mm [TP] 9 Almirah Map Steel [FD – 83 / FD – 1030] 10 Book Case Steel [FD – 1028] 11 Cabinet Filling Steel [4 Drawers] [FD – 397] 12 Chair CB Office with Arms [FD – 75] 13 Chair CB Office without Arms [FD 75] 14 Chair Verandah [FD / E6 / MAP / 11] 15 Chair Writing [FD / E6 / MAP / 12] 16 Locker Steel Built-in [FD – 1029] 17 Locker Steel [CWE [P] / V / SK / 18 & CWE [P] / V / SK / 35] 18 Locker Steel [4 Nos] [FD / SK / 944] 19 Form with Back [FD – 78] 20 Form without Back [FD – 77] 21 Rack Steel for Closed Records 915X760X1905mm [TP] 22 Stool Steel [FD – 81 / FD – 409] 23 Rack Steel Adjustable Six Tiers [FD – 106] 24 Rack Pigeon Hole Steel [FD – 106] 25 Side Rack with Trays [Steel] [FD – 97] 26 Rack Steel Adjustable Three Tiers [FD – 106] 27 Rack Shoe Steel [ FD / E6 / MAP / 02 [R]] 28 Steel Shelving Cabinet large [Adjustable Type] [TP] 29 Steel Shelving Cabinet Small [Adjustable Type] [TP] 30 Table Office Officers Steel [FD – 84 / FD – 306] 31 Table Office Clerk / General Steel [FD – 84 / FD – 307] 32 Table Typist Steel [FD – 84] 33 Table with Drawer Steel [FD – 1008] 34 Table Steel [FD – 1009] 35 Table Officers Steel [FD – 1003] 36 Table Clerk Steel [FD – 1004] 37 Chair Verandah [FD / MAP-II / 06] 38 Chair Revolving / Tilting with Arms [FD – 75] 39 Locker [6 Units] Steel [FD – 127] 40 Book Shelf Open Large Steel [FD – 69] 41 Chair Visitors [Model No. PCH – 7112R of Godrej] [TP] 42 Table Steel with Marble Top [FD – 136] 43 Chair Visitor 2-Seater with Arms [TP] 44 Vertical Storage Unit 1290 X 470 X 620mm 4 Drawer [TP] 45 Slotted Angle Rack 4 Tier [TP] 46 Storage Cabinet [Model No. Nova Pedestal of Godrej] [TP] 47 Storwell Big [Make: Godrej] [TP] 48 Work Station 1500 X 1500 X 1241mm [Make: Godrej Spacio] [TP] 49 Screen Moveable [Steel] [FD – 83] 50 Storage Cabinet [Model No. VSDU – 12 of Make Godrej] [TP] 51 ALMIRAH LARGE STEEL [FD – 67 / FD – 339 / FD – 1031] 52 Locking Device, Brass, Chromium Plated 6 Lever with Duplicate Keys, First quality 53 Handles 54 Removing the existing unserviceable / damaged Legs and supplying and fixing New Legs made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 55 Removing the existing unserviceable / damaged Back and supplying and fixing New Back made of 1.00mm thick CRCA sheet including welding and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 56 Removing the existing unserviceable / rusted Shelves and supplying and fixing New Shelves made out of 1.00 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 57 ALMIRAH MEDIUM / SMALL STEEL [FD – 67 / FD – 340 / FD – 1032] 58 Locking Device, Brass, Chromium Plated 6 Lever with Duplicate Keys, First quality 59 Handles 60 Removing the existing unserviceable / damaged Legs and supplying and fixing New Legs made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 61 Removing the existing unserviceable / damaged Back and supplying and fixing New Back made of 1.00mm thick CRCA sheet including welding and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 62 Removing the existing unserviceable / rusted Shelves and supplying and fixing New Shelves made out of 1.00 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 63 LOCKER STEEL BUILT-IN [FD – 1029] 64 Removing the existing unserviceable / damaged Legs and supplying and fixing New Legs made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 65 CABINET FILLING STEEL [4 DRAWERS] [FD – 397] 66 Removing the unserviceable / broken Drawers and supplying and fixing New Drawers made out of 1.00mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 67 Removing the unserviceable / broken Channels and supplying and fixing New Channels including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 68 CHAIR CB OFFICE WITH OR WITHOUT ARMS [FD –75] 69 M & L for Removing Dents / Bends by Cutting and Welding of broken Chair CB Office with Arms and bringing to its original shape, painting to Chair Tubular Steel with Arms including fixing 4 Nos of new PVC Bushes to the bottom of the chair frame and 2 Nos of PVC Caps on the top of the frame complete all as specified and as shown on drawing. 70 All as per Serial Item No. 6.01 above but for Chair CB Office without Arms 71 Removing unserviceable Seat Frame of Chair CB Office with Arms and S & F new Seat Frame made out of teak wood, black polished and duly plastic canned in Godrej pattern with plastic cane not less than 1.8mm width and borders with 4mm wide plastic cane fixed with 4 Nos screws and nuts to the chair frame complete all as specified and as shown on drawing. 72 All as per Serial Item No. 6.03 above but Back Frame of Chair CB Office with Arms 73 Removing broken Hand Rest and S & F new Hand Rest made of teak wood, black polished and fixed to the Chair CB Office with Arms with screws of suitable size to the chair frame complete all as specified and as shown on drawing. 74 All as per Serial Item No. 6.03 above but Seat Frame of Chair CB Office without Arms 75 All as per Serial Item No. 6.03 above but Back Frame for Chair CB Office without Arms 76 Removing of existing torn out / unserviceable plastic cane from Back of Chair CB Office with Arms and recanning with plastic cane in Godrej pattern with plastic cane not less than 1.8mm width and borders with 4mm wide plastic cane complete all as specified and as shown on drawing. 77 All as per Serial Item No. 6.08 above but Seat Frame of Chair CB Office with Arms 78 CHAIR VERANDAH [FD – 256 / FD – 359] 79 Removing of existing torn out / unserviceable plastic cane from Chair Verandah, preparation of steel tubular frame surfaces with emery paper for painting and applying two coats of synthetic enamel paint over one coat of red oxide primer and recanning the chair fully both seat and back with new plastic cane, white, half round of size 4mm wide including providing new suitable PVC shoes of approved quality and colour Complete all as specified and shown on drawing. 80 CHAIR VERANDAH [FD / MAP-II / 06] 81 Removing the existing worn-out Plastic Seat and Back from Chair Verandah and S & F new Plastic Seat & Back of approved quality including repairing the broken frame by proper welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 82 CAFETERIA CHAIR [TP] 83 Removing the existing worn-out Plastic Seat and Back from Cafeteria Chair and S & F new Plastic Seat & Back of approved quality and size including repairing the broken frame by proper welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 84 TEAPOY VERANDAH [FD / E6 / MAP / 17] 85 M & L for Repairing the Dents / Broken frame by proper welding to bringing it to original position by carrying out petty repairs including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 86 Removing unserviceable Top from Teapoy Verandah and S & F New Top complete all as shown on drawing and as directed. 87 TABLE OFFICE CLERK / GENERAL STEEL [FD – 84] 88 Removing the unserviceable / broken Leg and S & F New Leg including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 89 Removing the unserviceable / broken Drawer S & F New Drawer made of 1mm thick CRCA Sheet bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 90 Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board. 91 M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 92 TABLE OFFICE OFFICER STEEL [FD – 84] 93 Removing the unserviceable / broken Leg and S & F New Leg including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 94 Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board. 95 M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 96 TABLE TYPIST STEEL [FD – 84] 97 Removing the unserviceable / broken Leg and S & F New Leg including preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 98 Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board. 99 M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 100 OFFICE TABLE [Godrej WT 712 with ERV] [TP] 101 M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 102 EXECUTIVE TABLE DESK [1800 X 900 X 750mm] [Godrej Maestro] [TP] 103 M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 104 Table Computer [FD / E6 / MAP / 03]:M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 105 Table Steel Laminated Top of Size 1400 X 760 X 800mm with Three Side Drawers on Either Side [TP]: M & L for Removing dents of existing dislocated / damaged Drawers and bringing it to good condition by carrying out petty repairs and providing locking system [Lock & Keys] and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 106 TABLE BED SIDE [FD / E6 / MAP / 15 [R]] 107 Top made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board. 108 Right Side made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board. 109 Left Side made of 18mm thick Prelaminated Particle Board, Exterior grade, ISI marked and confirming to IS – 12823, Type – III with One side Decorative Lamination and other side Balancing White lamination with 6mm thick teak wood beading duly French Polished fixed to the exposed edges of Particle Board. 110 Front Door and fixing the knobs from Table Bed side and replacing the same items confirming to same quality and size complete. 111 Back Made of 6mm thick Plywood, BWR Grade, Type AA, conforming to IS – 303 and ISI marked provided in one piece in top. 112 STEEL SHELVING CABINET ADJUSTABLE TYPE [TP] 113 Removing the existing unserviceable / rusted Shelves of Steel Shelving Cabinet Large Adjustable Type and supplying and fixing New Shelves made out of 1 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 114 Removing the existing unserviceable / rusted Shelves of Steel Shelving Cabinet Small Adjustable Type and supplying and fixing New Shelves made out of 1 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 115 RACK STEEL ADJUSTABLE SIX / THREE TIER [FD – 106 / FD – 1038 / FD – 1039] 116 Removing the existing unserviceable / rusted Shelves of Rack Steel Adjustable Six Tier and supplying and fixing New Shelves made out of 1 mm thick CRCA Sheet, bent to shape including welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces 117 All as per Serial Item No. 20.01 but Rack Steel Adjustable Three Tier complete all as specified and as directed. 118 All as per Serial Item No. 20.01 but Rack Steel Adjustable Closed Type of Size 1875 X 900 X 500 mm [TP] complete all as specified and as directed. 119 CHARPOY IP HARD TOP [FD / MAP-II / 01] 120 Removing the existing damaged plywood Top from the GI Charpoy Plywood top and S & F new 12 mm thick Plywood, BWR Grade Top of size 1950mm X 900mm including fixing with Screws and washers including tightening of loose components by welding angle iron / flat iron cleats of suitable size duly painted with two coats of Synthetic Enamel Paint [Black Colour] complete all as shown on drawings and as directed. 121 CHARPOY GI PIPE WITH PLYWOOD TOP [FD – 220] 122 Removing the existing damaged plywood Top from the GI Charpoy Plywood top and S & F new 12 mm thick Plywood, BWR Grade Top of size 1950mm X 900mm including fixing with Screws and washers including tightening of loose components by welding angle iron / flat iron cleats of suitable size duly painted with two coats of Synthetic Enamel Paint [Black Colour] complete all as shown on drawings and as directed. 123 Removing the old unserviceable Nylon newar from GI Charpoy, cleaning the surfaces thoroughly, Supplying and closely weaving both sides with new Nylon Newar First Quality of Light Shade of size 50/55 mm wide of approved quality consisting minimum 33 Bands and 13 Rows, not less than 1.50 KGs per Charpoy including minor repairs complete all as shown on drawings and as directed. Make: Konark / Mayur / Kohinoor [Recycled Nylon Newar shall not be used] 124 S & F MS Stiffners made of 25 X 4mm Flat Irin or 25mm Square Tube, 16 Guage, welded to 32mm Dia GI Pipe Charpoy and fixed to Ply Wood top with suitable Nut and Bolts and duly painted with two coats of Synthetic Enamel Paint [Black Colour] over a Coat of Red Oxide Primer complete all as shown on drawings and as directed. 125 Taking down existing unserviceable GI Pipe Long Rail of 32 mm Bore from GI Pipe Charpoy and Supplying & Fixing new Long Rail using 32 mm Bore GI Pipe, Medium Grade, approved quality, of length as per existing Long Rail with proper threading complete all as shown on drawing and as directed. 126 Taking down the existing Short Rails and making the existing GI Pipe Long Rails 32 mm bore obtained from Item No. 22.04 above into short rail by cutting, threading suitably and fixing with existing old elbow complete all as shown on drawing and as directed. 127 Making the existing unserviceable GI Pipe Short Rail 32 mm Bore of Charpoy obtained from Item No. 22.05 above and converting into Legs by cutting, threading suitably and fixing with existing elbow including providing 3 mm thick MS Base Plate equal to outer dia of the pipe, welded at the bottom of the Leg and two Nos Clamps made out of 3 mm thick MS Black Sheet welded to each Legs for holding mosquito net frame set frame all as shown in drawing including one coat of black enamel paint to mosquito net frame complete all as shown on drawing and as directed. 128 Taking out existing unserviceable GI Pipe Three Way Elbow from GI Pipe Charpoy and Supplying & Fixing New GI Elbow, 32 mm Bore, Three Way, Medium Grade, approved quality complete all as shown on drawing and as directed. 129 Taking out existing unserviceable GI Check Nut from GI Charpoy and Supplying & Fixing New 32 mm GI Check Nut complete all as shown on drawing and as directed. 130 CHAIR EXECUTIVE TYPE REVOLVING [HFD – 2047] 131 M & L for carrying out repairs including replacement of Wheels and Cushion with Cover including replacement of necessary steel sections and spares of Main Frame to bring it to original shape and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 132 CHAIR VERANDAH [FD / E6 / MAP / 11] 133 Removing the existing worn-out Steel Plates of Seat and Back from Chair Verandah and S & F new Steel Plates of Seat and Back of approved quality including repairing the broken frame by proper welding and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 134 RACK SHOE STEEL [FD / E6 / MAP / 02 [R]]:M & L for Repairing the Dents / Broken frame by proper welding to bringing it to original position by carrying out petty repairs including replacement of necessary steel sections and spares and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as shown on drawing and as directed. 135 Rack Steel Parachute [U2, HSN / SAC: 998719] of Size 97 ¼ X 48 X 24:M & L for Repairing the Dents / Broken frame by proper welding to bringing it to original position by carrying out petty repairs including replacement of necessary steel sections and spares and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as specified and as directed. 136 Rack Steel Parachute [HSN / SAC: 998719] of Size 94 X 36 X 24:M & L for Repairing the Dents / Broken frame by proper welding to bringing it to original position by carrying out petty repairs including replacement of necessary steel sections and spares and preparation of surface and applying two coats of synthetic enamel paint over one coat of red oxide primer including preparation of surfaces complete all as specified and as directed.
