Tender For Provn Of Certain Facility And Construction Of Pads Under Ge Nams; 1 Material and Labour for Site clearance/ Clearing of bushes and removing the bushes to distance n exc 150m all as specified and as directed. 2 Material and Labour for Taking down old Mild Steel gate, of area n exc 9 Sqm and erecting and refixing the same after making it serviceable, easing, renewing and greasing, oiling complete including cutting, filling for hold fast including making good in PCC 1:2:4, type B-0 as required and applying two coats of synthetic enamel paint to gate complete all as specified and as directed.Note: Complete gate assembly irrespective of no of shutter/ leaf shall be measured as a single job. 3 Material and Labour for Demolition of cement concrete in ground floors and paving not exceeding 15 cm thickness ( below or above ground level) and disposing the rubbish to a distance exceeding 50 Mtr but not exceeding 100 Mtr away to low lying areas complete all as specified and as directed. 4 Material and Labour for hardcore of broken stone or boulders n.exc 63mm,deposited,spread and levelled in layers n.exc 15cm thick, watered and rammed properly to a true surface for compacted thickness complete all as specified and as directed. 5 Material and Labour for Providing, cement concrete (1:2:4), type B-1 using 20mm graded stone aggregate as in to be laid in Panels as in flooring for hardstanding, padding over roof slab or mud stops including providing side forms/shuttering, rounded or chamfered on edges complete all as specified and as directed. 6 Material and Labour for Forming Construction joints straight and vertical through full thickness of slab of 12 mm width and filling with pre-formed bituminuous filler board and top 20mm of joint to receive the gradeB sealing compound including providing filling with grade B sealing compound over primer surface and including formwork for sides of joint complete all as specified and as directed. 7 Material and Labour for Excavation in trenches, n exc 1.5 m wide and n exc 1.5 m in depth; for drains n exc 10 sq m on plan and n exc 1.5 m in depth and getting out complete all as specified and as directed. 8 Material and Labour for Earthwork in excavation by mechanical means in any kind of soil (Hydraulic Excavator) over areas(exceeding 30cm but n exc 1.5 m in depth, 1.5mtr in width as well as 10 Sqm on plan) including getting out and disposal/removal of excavated earth to a lead upto 50 mtr and lift 1.5 mtr complete all as specified and as directed. 9 Material and Labour for Earthwork in excavation by mechanical means in any kind of soil (Hydraulic Excavator) over areas(exceeding 1.5m but n exc 3 m in depth, 1.5mtr in width as well as 10 Sqm on plan) including getting out nd disposal/removal of excavated earth to a lead upto 50 mtr and lift 1.5 mtr complete all as specified and as directed. 10 Material and Labour for Demolition of brick workmasonry built in cementmortar including all quions, arches, pillars bwork of any description all as specified and as directed. 11 Material and Labour for Brick work with sub class B bricks built in CM(1:6), straight or curved on plan exc 6 mtr mean radius, using old size bricks completeall as specified and as directed. 12 Material and Labour for Brick work with sub class B bricks built in CM(1:6), except bricks, straight or curved on plan exc 6 mtr mean radius, using old size bricks completeall as specified and as directed.Note :- Old reuseable bricks received from demolition/dismantling to be reused after cleaning etc 13 Material and Labour for Taking down cement plaster of any description on brick or stone walls, etc.including raking out joints, hacking for key, scrubbing down with water, etc. complete all as specified and as directed. 14 Material and Labour for rendering 15mm thick on fair faces of brick work or concrete surface in cement mortar 1:6 internally and finished even and smooth ( without using extra cement); complete all as specified and as directed. 15 Material and Labour for rendering 15mm thick on external surfaces in CM 1:4 and finished even and smooth (without using extra cement) including mixing of WPC complete all as specified and as directed.Note:- WPC shall be paid under separate item. 16 Material and Labour for rendering 10mm thick on ceiling in cement mortar 1:3 internally and finished even and smooth ( without using extra cement); complete all as specified and as directed. 17 Material and Labour for preparing newly plastered surfaces of wall and Finishing walls with Acrylic Smooth exterior paint of required shade/camouflage pattern : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm) complete all as specified and as directed. 18 Material and Labour for Preparation of new plastered surface and applying two coats of oil bound distemper on wall over one coat of primer etc complete all as specified and and as directed. 19 Material and Labour for complete removal of existing treatment and applying two coats of oil bound distemper on walls complete all as specified and and as directed. 20 Material and Labour for preparation of new plastered surfaces and applying three coats of white wash on ceiling complete all as specified and as directed. 21 Material and Labour for preparation of old existing treatment by wire brushing and washing, rubbing down and stopping of surfaces and applying two coats with acrylic smooth exterior paint of required shade @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm in comorfpage patten complete all as specified and as directed. 22 Material and Labour for preparation of old decorated plastered surfaces and applying one coat of white wash on ceiling complete all as specified and as directed. 23 Material and Labour for Reinforced Cement Concrete (1:2:4) (Nominal Mix) using 20 mm graded stone aggregate as in slabs supported on walls, beams and columns in floors, roofs, landings, balconies, canopies, deck slabs and in shelves and the like; complete all as specified and as directed. 24 Material and Labour for Reinforced Cement Concrete M-25 design mix as in foundations, including rafts, footings, foundation beams; plinth beams; bases for columns, etc.; basement slabs, under-reamed piles and mass concrete complete all specified and as directed. 25 Material and Labour for Cement concreteM-25 design mix as in flooring for hardstanding of heavy vehicle type B, including providing side forms/shuttering complete all as specified and as directed. 26 Material and Labour for Plain Cement Concrete as in foundation filling and mass concrete (1:4:8), type D-2,using 40 mm graded stone aggregate complete all as specified and as directed. 27 Material and Labour for use and waste of Formwork to soffits of suspended slabs such as roof slabs, floor slabs, landings and similar work; not exceeding 200mm thick (Horizontal or sloping) to flat rough finished surface of concrete complete all as specified and as directed. 28 Material and Labour forUse and waste formworkto sides of columns, pillars, posts, struts, piers and stanchions, rectangular or square for rough finished flat surfaces of concrete all as specified and as directed. 29 Material and Labour for TMT bars 8 to 10 mm dia, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding withmild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 30 Material and Labour for TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding withmild steel wire (annealed) not less than 0.9mm dia or securing with clips complete all as specified and as directed. 31 Material and Labour for Plain Cement Concrete (1:2:4), type B-0, using 12.5 mm graded stone aggregate as in padding over roof slab and similar work etc, complete all as specified and as directed. 32 Material and Labour for uprooting grass on old existing mud phuska, removing rubbish off the premises and cleaning surface complete all as specified and as directed. 33 Material and Labour for Demolition of mud in roofs, any thickness including plastering and leaping etc and stacking well for reuse complete all as specified and directed. 34 Material and Labour for Laying and spreading of useable mud phuska obtained from demolition item No-33 above over roof surface including compaction and satisfaction. 35 Material and Labour for Removal of mud phuska to distance n exc 250 mtr complete all as specified and as directed. 36 Material and Labour for 10mm plaster over roof surface in CM (1:3) including WPC @3% by weight of cement finishing the surface even and smooth without using extra cement complete all as specified and directed.Note: WPC shall be paid under separate item. 37 Supply and Fix in repairs 40mm dia Gl pipe medium grade in spout pipe over roof surface complete all as specified and as directed. 38 Material and Labour for APP based polymeric membrane minimum weighing 3kg/sqm and minimum 3mm thick reinforced with polyester non woven fabric (wt not less than 150 gms/sqm) laid on roof on bitumen surfaces by forced application including any cutting chases ad making good over a tack coat of industrial bitumen 85/25 grade @ 1.2 Kg/Sqm including cleaning surfaces etc complete all as specified and as directed. 39 Material and Labour for Cement Concrete (1:3:6), type C-1, using 20mm graded stone aggregate as in 50mm thick plinth protection and as in path including demolition of existing cement concrete and throwing off rubbish complete all as specified and directed. 40 Material and Labour for Dismantling of PVC drain/rainwater pipes 75/100mm bore, set in cement mortar, fixed to wall/laid in trenches etc including all fittings complete all as specified and as directed 41 Supply and Fix 110 mm bore PVC (SWR) pipe single socketed in any length joints fixed to walls with and including clamps & fittings(Minimum three clamps per span of any length), including nuts, bolts etc complete all as specified and as directed. 42 Material and labour for damproofing of wall with two component Acrylic polymer cementitious water proof elastomeric coating for grade mix to form uniform slurry and applying with paint brush as first coat, subsequently laying a layer of fibre glass mesh cloth while first coat is still green with overlap of joints of fibre mesh not less than 100 mm, and finally applying second layer mix by brush to entire surface @ 0.6 - 0.75 Sqm /Kg with 1 mm thickness in two coats depending on the level of substrate and curingfor minimum 3 days. Note : Quoted rate shall be deemed to be inclusive of rates for working upto height 6 metre. 43 Material and labour for 18-20mm thick machine cut kota stone slab flooring laid over 20mm thick cement screed bed in CM (1:6) laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab as in floors including grinding and polishing complete all as specified and as directed. 44 Material and labour for earth filling around traverse wall by bringing in earth from outside MOD land,earth shall be free from vegetation, stones, and pebbles,foreign materials and having good engineering properties for filling in embankment complete all as specified and as directed. 45 Supply only Water Proofing compound @3% by weight of cement complete all as specified and and as directed. 46 Material and Labour for Point wiring complete with 1.5 sqmm single core PVC insulated unsheathed cable 1100 volts grade, multistranded with copper conductors conforming to IS specifications, drawn through and including conceled conduit concealed/ fixed on wall / ceiling with suitable clamps, screws, etc or concealed in wall including terminal boxes fabricated with 1.6 mm MS sheet concealed in walls covered with plastic laminated sheet top cover 3 mm thick fixed with cadmium plated iron screws for housing the switches, switch sockets outlets, fan regulators, etc, including provn of 1.5 sqmm PVC insulated unsheathed cable with multistranded copper conductor as earth continuity conductor and connecting to common earth dolly all as specified and as directed :-(a)One light point/Bell/Fan point controlled by one switch. 47 (b)One 3 pin 5 amps switch socket on same board with other switches. 48 Supply and Fix switch piano type 6 Amps one way 230 volts AC complete all as specified and as directed. 49 Supply and Fix of socket outlet two-in-one, 3 pin each suitable for 5 Amperes flush type, 230 volts AC complete all as specified and directed. 50 Material and Labour for Flame proof point wiring with FRLS multi-stranded copper conductor single core PVC insulated fire resistant cable 1.5 Sqmm size sheathed cable including 20 mm size steel conduit concealed/surface flame proof wiring with all flame proof steel conduit fitting and accessories i.e junction box,ceiling rose, inner/outer corners and inner/outer bends, tees etc. with continuous 1.5 sqmm PVC insulated fire resistant copper earth cable (green color) FRLS conneted to common earth including cutting chases to wall making good the disturb suface to match with the exising specification complete all as specified and directed by Engr - in - charge. 51 Supply and Fix flame proof switch socket & plug combined in LM 6 cable termination box in LM6, 16A, 250V, 2P+earth complete all as specified and as directed 52 Supply and Fixing Flame Proof/Water Proof switch 10 amps single pole ON/OFF complete all as specified and as directed. 53 Supply and Fixing Ceiling rose surface bakelite 3 terminals 65x32mm complete all as specified and directed. 54 Supply & Fix LED light fitting 40 watt flame proof, weather proof CMRI certified recommended for Gas/Vapor group of I,IIA & IIB Zone 1 & 2 and IP 65 protection with die cast aluminum housing with heat resistant toughened glass, with LED tube light fixtures driver, holders, connector etc. Complete with all accessories prewired and including connecting up with three core flexible copper conductor cable with suitable size all as specified and as directed. 55 Supply and installation in repairs, commissioning and testing Polycarbonate ASTA CPRI approved OEM made main LT Panel. The panel shall be made of modular POLYCARBONATE THERMOPLASTIC ENCLOSURES including MCCBs and indicator lamps which shall be UV resistance in accordance with IEC 61439-1, clause 10.2.4: The panel shall be anti-acid & anti corrosive. Degree of protection against mechanical load shall be IK08 (5 Joule) in accordance with IEC 62262. The manufacturer of panel shall submit a copy of ASTA CPRI TEST REPORT IN POLYCARBONATE only also share panel assembled by OEM, channel partner or sister concern assembly will not be accepted. DEGREE OF INGRESS PROTECTION IP 65 IN ACCORDANCE WITH IEC 60529. The gasket shall be internally embedded made of polyurethane. The Panels builder shall submit a copy of TYPE TEST REPORT of a board made out of Polycarbonate thermoplastic panel in accordance with IEC 60439-1. 56 Item No 55 contd.../-The ASTA CPRI report shall have mention of following tests performed and passed out satisfactorily - Temperature Rise, Dielectric Properties, Short circuit withstand current - Rated peak & short time withstand current and Rated Conditional Short Circuit Current, Effectiveness of Protective Circuits. The board manufacturer shall submit the copy of type test reports for Polycarbonate Thermoplastic Board only. Test Reports submitted of other material of construction like MS, SS will not be applicable. Each Board shall have individual routine test report of the manufacturer. The panel shall pass glow wire test 960 degrees Centigrade in accordance with 60695-2-11 (flame retardant and self-extinguishing). Incomer i) MCCB 100 A 4P , Thermal Magnetic Released with Spreader links - 1 No ii) LED Indicator lamp R,Y,B - 1 Sets Outgoings i) 40 A, 4 Pole MCB-03 Nos ii) 32 A, 4 Pole MCB-02 Nos. 57 Supply and Fix Flame proof MCB DB 8 Way including one MCB 32 amps as incomer and 6 amp SP as outgoing complete all as specified and as directed. 58 Material and Labour for sub main wiring with 1100 volt grade two single core FRLS Wire PVC insulated and unsheathed cable with stranded copper conductor 6 sqmm drawn into and including electrical grade PVC conduit not less than 25 mm dia with IS 9537 (Part-III) 1983 mark, or relevant ISI mark with all accessories fixed concealed including chase cutting in brick/ stone masonry for fixing conduit and making good the disturb surfaces of wall as per existing including 6 sqmm multi - stranded copper conductor as earth wire in green colour complete all as specified and directed. NOTE: 3 runs of single core 6 sqmm and PVC conduit shall be measured as one RM. 59 Supply and Fix MCBs single pole (SP) 6 to 32 Amps with 10 KA breaking capacity of B series in distribution boards complete all as specified and as directed 60 Supply and Fix in repairs MCB SPN, 240 volts, 32 Ampere, rupturing capacity 10 KA, B curve type complete all as specified and as directed. 61 Supply and Fix in repairs MCB single pole, 240 volts, 32 Ampere, rupturing capacity 10 KA, B curve type complete all as specified and as directed. 62 Supply and Fix wall/ceing mounting LED 18 Watt PC Diffuser tube light fitting complete with all aceesories 1x18W LED suitable for domestic application 240Volts 50HZ including one tube rode and internally pre-wired with 1.5 sqmm twin twisted flexible copper conductor and complete all as specified and as directed 63 Material and Labour for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 25 sqmm 4core with cable gland complete all as specified and as directed. 64 Material and Labour for laying of LT cable of 1100 volt XLPE insulated and PVC sheathed of size 10 sqmm 2core with cable gland complete all as specified and as directed. 65 Material and Labour for Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc 25 cm. complete all as specified and as directed. 66 Material and Labour for Removing excavated material n exc. 50m and depositing where directed at a level n exc. 1.5 m above the starting point complete all as specified and as directed. 67 Material and Labour for Removing excavated soil to a distance not exc250m but n.exc 500 mtr away and depositing where directed at a level not exc 1.5m above the starting point complete all as specified and as directed. 68 Material and Labour for Rolling and consolidating formation surfaces in cutting using Power Roller exc 8 tonne and n exc 12 tonne includingwatering as necessary and consolidating to the required level, gradient or camber, keeping roller wheels wet complete all as specified and as directed. 69 Material and Labour for rolled steel sections hollow round pipe (Fe 410- W Gde E-250 quaility-A) fixed with foundation RCC and column including welding to reinforcement complete all as specified and as directed. 70 Supply,Lay & Fix double wall corrugated (DWC) pipes made of high density polyethylene (HDPE) with all accessories i.e. all type of joints, sockets, elbows, bends and end cap etc. of size 75 mm outer dia and 61 mm inner dia complete all as specified and as directed. 71 Material and Labour for road cutting 30 cm wide and 50 cm deep including excavation and getting out, returning filling in; spreading, levelling and well ramming in layers, soling with broken boulders or quarried stone, interstices filled, 7.5 cm thick (compacted thickness ) WBM(water bound macadam) with coarse aggregate retrieved from road cutting consolidated to required gradient and camber, including applying evenly a priming /tack coat with bituminous primer and making surface even and getting out surplus soil complete all as specified and as directed. 72 Supply and Fix in replacement of security light fitting LED 36 Watt aluminum pressure dia cast housing with touched glass cover IP-66 protection Including suitable size and accessories complete mounted including connection with 3 core PVC insulated overall sheathed flexible cable with multistranded copper conductor of size not less than 1.0 sq mm from celing rose to fitting terminal all as specified and as directed. 73 Material and Labour for Earthing complete with galvanized iron earth plate electrode 600 x600x6mm thick buried directly in ground (earth pit not less than 2.25 meters deep below normal ground level) with top edge of plate not less than 1.6 meter below normal ground level connected to galvanized earth lead wire 4 mm dia by means of bolts, nuts check nuts galvanized iron or steel all as shown in Electrical plate No.3 of MES sch pt I testing on completion with & incl. 15 mm bore light grade Gl protection pipe 7.5 mtr long for earth lead, PCC (1:3:6) pit with pre cast RCC (1:2:4) cover watering arrangement with funnel, wire mesh 20 mm bore light grade GI pipe, common salt & char coal fixing necessary excavation earth work complete all as specified and as directed. Note:- (GI pipe & GI wire beyond 7.5 mtr will be measured and paid respectively) 74 Supply and Fix GI bracket of light grade GI Pipe 1.2 m Length for fixing of street light fitting 36/40 Watt including connection all as specified and as directed.
