|
| 1 | PDKPOperation and routine maintenance of sub-station equipment having Oil type transformers 400KVA - 1 No. (11 KV/415 V Indoor type) i/c HT panel, L.T. panels, capacitor panels & Floor panels etc. and 1 No. of 125 KVA D.G. setsi/c other allied panels and Running Maintenance & Operation ofInternal Electrical Installations (IEI) and ExternalLighting including high mast lighting &submersible pump operation by deploying following staff as per inventory andadditional Terms and conditions attached etc.complete as reqd.a)Electrician cumOperator-3 Nos.(1 No. in each shift total three shift i.e. 6 AM to 2 PM & 2 PM to 10 PM & 10PM to 6AM )b) Khallasi - 2 Nos.(1 No. in each shift total two shift i.e. from 6 AM to 2 PM & 2 PM to 10 PM) c)Supervisor Fortnightly Visit(Note:All Tools and Plants (T&P) including tower wagon suitable to maintained fittings mounted up to height 12 Mtrs. shall be made available at the site throughout the contract period.) |
| 2 | Servicing (B-Check Maintenance) of 125 KVA DG set by OEM / authorised dealeras complete as required(For PDKP)a)Kit element oil filter - 2 Nos.b)Kit fuel filter element - 2 Nos. (Primary & secondary ) c)By pass filter- 1 No.d)Coolant – 1 liters e)Air filter (inner & outer) -1setf) Lubricating oil (SAE 15 W 40) |
| 3 | Servicing of H.T. OCB Complete with dismantling, Cleaning, alignment, adjustment of gaps between phases, lubricating all moving parts adjustment for smooth mechanical operation etc complete as required. |
| 4 | Testing and Calibration of IDMT relay with secondary injection test set i.e. cleaning servicing of contacts tightening of loose contacts testing repair etc., complete as required. |
| 5 | Servicing / Overhauling 800/1000 Amp ACB\"s with dismantling, cleaning, alignment, adjustment of gaps between phase, lubricating all moving parts adjustment for smooth mechanical operation etc complete as required. |
| 6 | Providing and fixing following rating and breaking capacity and pole MCCB with thermomagnetic release and terminal spreaders in existing cubicle panel board including drilling holes in cubicle panel, making connections, etc. as required. |
| 7 | 63 Amp TPN MCB. |
| 8 | 125A,36KA, FPMCCB |
| 9 | 250A,36KA, FPMCCB |
| 10 | Supplying and making straight through joint with heat shrinkable kit includingferrules and other jointing materials for following size of PVC insulated and PVC sheathed/ XLPE aluminum conductor cable of 1.1KV grade as reqd. |
| 11 | a) 3½ Cx240 sq.mm |
| 12 | b) 3½ Cx185 sq.mm |
| 13 | c)3½ Cx95 sq.mm |
| 14 | Labour and T&P charges for locating fault in LT cable by fault locating equipment including pin pointing of particular location of fault etc as required. |
| 15 | Digging of Pit for providing cable joint as per site located by fault Locator machine including refilling of soil complete as required. |
| 16 | Dehydration & filtration of transformer oil (400 KVA transformer indoor ONAN) to upgrade the dielectric strength of oil upto 50 KV as required including topup of transfer oil etc. complete as required. |
| 17 | Supplying and top up of fresh transformer oil. |
| 18 | Supply andfixing 4’ long 20 wattLED Batten – AL- anodized indoor decorative LED extruded IP-20 filing with opal diffuser connection testing etc. as required. |
| 19 | Suppling and fixing of 12 watt LED Bulb connection testing etc. as required. |
| 20 | Supplying and replacement (including deduction of cost for replaced item) of PVC insulated copper round cable of following size in the existing surface / recessed conduit i/c connection testing etc as reqd. |
| 21 | 3x 1.5 sq.mm |
| 22 | 3x 2.5 sq.mm |
| 23 | 3x 4.0 sq.mm |
| 24 | Supplying and fixing following modular switch /Socket on the existing modular plate & switch box including connection but excluding modular plate etc. as required. |
| 25 | 5/6 Amp Switch. |
| 26 | 15/16 Amp Switch. |
| 27 | 3 pin 5/6 Amp Socket outlet. |
| 28 | 6 pin 15/16 Amp socket outlet. |
| 29 | Supplying of following MCB\"sfor Electrical Panel Board/ feeder pillar/ pole including testing etc as required. |
| 30 | 6 to 32 AmpSP MCB \"C\" series. (10 KA Capacity) |
| 31 | 32 AmpDP MCB \"C\" series. (10 KA Capacity) |
| 32 | 63 Amp FP isolater. |
| 33 | 63 AmpTPN MCB \"C\" series. |
| 34 | Supply of PVC insulated and PVC sheathed / XLPE armoured aluminium conductor power cable (As per IS 7098 (Part-1) of 1.1 KV grade i/c connection testing etc.as required. |
| 35 | 2 x16 sq.mm |
| 36 | 3.5 x 25 sq.mm |
| 37 | 3.5 x 50 sq.mm |
| 38 | Supplying and laying of following size DWC HDPE pipe ISI marked along with all accessories like socket, bend, couplers etc. conforming to IS 14930, Part II complete with fitting and cutting, jointing etc.direct in ground (75 cm below ground level) including excavation and refilling the trench but excluding sand cushioningand protective covering etc., complete as required. |
| 39 | 63 mm dia (OD-63 mm & ID-51 mm nominal) |
| 40 | 90 mm dia (OD-90 mm & ID-76 mm nominal) |
| 41 | Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required. |
| 42 | Upto 35 sq. mm |
| 43 | Above 35 sq. mm and upto 95 sq. mm |
| 44 | Providing and fixing 6 SWG dia G.I. wire on surface or in recess for loop earthing as required. |
| 45 | Supply and fixing of 250 mm sweep fresh Air fan ( 5 nos blade) i/c connection, testing etc complete as required. |
| 46 | Supply and fixing of 400 mm wall fan ( 3 nos blade) i/c connection, testing etc complete as required. |
| 47 | Supplying, Installation,Testing and Commissioning of 36 watt 2ftx2ft recessed/surface mounted high efficient LED light fittingminimum 3600 lumen fabricated with deep drawn CRCA sheet steel housing duly power coated with high efficient LEDs&glare free full ,opal diffuser,IP 20 i/cvconnecton etc. complete as required. |
| 48 | Supplying and fixing ofSurface/recess Mounting20 Watt LED light fitting 1\"X1\" fabricated with CRCA sheet steel housing duly power coated with high efficient LEDs & glare free full ,opal diffuser, IP 20 etc as required. |
| 49 | Supplying, Installation, Testing and Commissioning of 40-45 watt LED Post top Luminaire with Die- castaluminium graphite grey powder coated spigot and spunaluminiumbody with clear/opal diffuser IP-65 protection, driver with all accessoriesi/c connection, testing etc. complete as required, as per technical specification attached. |
| 50 | SITC of150 WattLED Flood light fitting complete with suitable lens & other accessorieshighly efficient made ofpressure die cast aluminium housing ,extruded aluminium heat sink & enclosed with toughened glassIP-66 protection and achieving 16500 Lumens & fitting not more than 150 watt i/c making modification in existing brackets according to LED flood light fitting i/c connection testing complete as per technical specifications attached etc as required. |
| 51 | SITC of200 WattLED Flood light fitting complete with suitable lens & other accessorieshighly efficient made ofpressure die cast aluminium housing ,extruded aluminium heat sink & enclosed with toughened glassIP-66 protection and achieving 22000 Lumens & fitting not more than 200 watt i/c making modification in existing brackets according to LED flood light fitting i/c connection testing complete as per technical specifications attached etc as required. |
| 52 | Lifting out of submersible pump set from the exiting bore well up to the required depth along-with existing G.I. pipes and accessories etc. i/c dismantling of G.I pipe and disconnecting the submersible cable etc. complete as reqd. |
| 53 | Lowering of sub. pump set in the existing bore well up to the required depth along with existing G.I pipe and sub. cable etc , water proof jointing of sub. cable. Replacement of reqd. nuts, bolts, washers and packing, nipple, reducer, connection testing, etc. complete as reqd. |
| 54 | Supplying of copper conductor flat submersible cable offollowing sizei/c connection testing etc. complete as reqd. |
| 55 | 3 x 4 sq.mm |
| 56 | 3 x 6 sq.mm |
| 57 | Supplying of following size of double G.I. flanged (ISI marked ) GI pipe \"B\" class duly threaded or welded with necessary pipe fittings, bends, elbow etc. complete as reqd. |
| 58 | 65 mm dia. |
| 59 | 50 mm dia. |
| 60 | Repairing & rewinding of 3 phase submersible motors of following capacity with cartage, dismantling, reassembling i/c supply & replacememt / repairing of damaged parts of motors and making good for operation i/c connection, testing, painting etc. complete as reqd. |
| 61 | 5 HP submersible motors |
| 62 | 12.5 HPsubmersible motors |
| 63 | Repairing of submersible pump of the following stages &dia with cartage, dismantling, reassembling, supply & replacement / repairing of damaged parts of pump and making good for operation i/c testing painting etc. complete as reqd. |
| 64 | Up to all stages 4\"dia submersible pump sets |
| 65 | Up to all stages 6\"dia submersible pump sets |
| 66 | Repairing, Rewinding & servicing of submersible Dewatering pump set i/c repairing / replacement of following worn out part and testing etc as required. i)3HP pump set. |
| 67 | Supplying & replacement of following control gear / accessories in the existing installation for electric panel boards, motor starters, connection, testing etc. as reqd. |
| 68 | Single Phase Preventer |
| 69 | D.O.L starter (suitable upto 5 HP pump) |
| 70 | Maintenance of RO 50 LPH basic (6 nos) inclusive of all electrical and electronics spare parts and one set of consumables: particulate filter 20\" (2x10\"), sediment filter 20\" (2x10\"), Pre carbon filter(AC block) 20\", post carbon filter (AC block)20\" except membrane set of 4 x 75 GPD as per condition attached. |
| 71 | Replacement of RO membrane filter 75 GPD in existing Reviva RO at site. |
| 72 | Supplying andfixing of 20\"or 2x10\" particulate/sediment filter in existing Reviva RO at site. |
| 73 | Supplying and replacing 20\"\" pre filter spun 5 micron of size 20\"\"X 2.5\"\" in existing RO at site. |
| 74 | Supplying andfixing of Automated on/ off Switching Device for Level monitoring of Water cooler in existing Reviva RO at site. |
| 75 | Supplying Installation, Testing & commssioning of Pressure generating Pump with Automated Switch for 50 LPH Reverse Osmosis System complete as reqd.. |
| 76 | Comprehensive Annual Maintenance contract of P.A. System & KTS (Key telephone sysytem)with all accessories installed at Poorv Delhi Khel Parisari.e. 40 Watt Garden Speaker- 27 Nos., 700 watt Amplifier-02 Nos., wireless Mike- 01 Nos. Rack-01 Nos., Feeder Pillar-01 Nos, KTS exchange -01 No.,12 Key telephone - 02 Nos, Push button Telephone -4 Nos i/c underground wiring of speakers etc complete as required. |
| 77 | Dismntlling, Providing, Installation and Testing of outdoor type Garden Speaker made of aluminum alloy having duly painted in green color. The speaker having arrangements of taping 40w/20w/10w/5w on 100 volt and frequency of 160 16000hz. Installation of speaker with suitable RCC Foundation and suitable nut bolt after fixing 50 mm dia GI pipe of suitable length with suitable size flange i/c connection testing etc. as required. |
| 78 | Refilling of fire extingusher through BIS accredited agencies & facilitation of refilling certificates. Scope shall include dismounting/ re-installation of cylinders with commissioning, testing etc. & all necessary equipment’s/ tools/ tackles etc. required for the same. etc complete as required. |
| 79 | ABC Type fire extinguisher of 4.5 kg capacity with M.A.P 90% |
| 80 | ABC Type fire extinguisher of 9/10kg capacity with M.A.P 90% |
| 81 | Supply & installation offollowing Spare parts in existing fire extinguisher etc complete as required. |
| 82 | PVC Syphon Tube |
| 83 | Discharge nozzle |
| 84 | Pressure gauge |
| 85 | Safety Clip |
| 86 | Labelling of fire extinguisher etc complete as required. |
| 87 | Service of following type air conditioner of 1.5/2.0 ton capacity i/ccleaning of cooling coil & condenser with chemical, washing the complete air-conditioner, painting of sheet metal parts hose plate with synthetic enamel i/c painting of exposed cooling & condenser pipes with anti corrosion paint, oiling of fan motor, etc as required. |
| 88 | split type |
| 89 | Window type |
| 90 | Servicing of water cooler 40/80/120/150 ltr. Capacity oiling in fan motor, Cleaning of base plate and condenser coil with chemical and cleaning of water tank etc. complete as required. |
| 91 | supply and fixing of 1.5 Ton/2.0 Ton capacity air conditioner i/c replacement of burnt compressor with following type of new compressor including flushing thesystem, leakage, testing, vacumising, cleaning of condenser, gas charging, cartage i/c testing and commencing complete as required. |
| 92 | Rotary type compressor |
| 93 | reciprocating type compressor |
| 94 | Supplying & replacement of condenser coil suitable for various make of window type/split type air-conditioner of 1.5/2.0 Ton capacity having copper piping, i/c welding, pressure testing etc as required. |
| 95 | Supplying & replacement of Evaporatingcoil suitable for various make of window type/split type air-conditioner of 1.5 ton capacity having copper piping, i/c welding, pressure testing etc as required. |
| 96 | Supply and charging of refrigerant for 1.5 Ton/2.0 Ton capacity split/window type air conditioner of various make i/c testing of pressure and cooling etc. complete as required. |
| 97 | Repairing of PCB of Split type AC/window type AC i/c connection, testing etc. complete as required. |
| 98 | Rewinding of fan motor 1.5Ton/2.0 Ton capacity Air conditione i/c replacement of Gun Metal bushes and testing etc. Complete as required. |
| 99 | Supplying and replacement of following part of air conditioner i/c connection, testing etc complete as required. |
| 100 | Front grill suitable for existing Air Conditioners. |
| 101 | Running capacitor (36 MFD/50 MFD) |
| 102 | Capacitor 6 MFD |
| 103 | Rewinding of fan motor suitable for 40/80/120/150 Ltr capacity water cooler i/c replacement of bushes, testing, commissioning etc. complete as require. |
| 104 | Supply and replacement of following part in water cooler i/c connection, testing etc. complete as required |
| 105 | Thermostat |
| 106 | Over load protection with relay box |
| 107 | Float Valve Assembly |
| 108 | Water tap |
| 109 | Supplying and installation of Copper refrigerant piping(Liquid + gas)with suitable size of insulation ,tie rod ,hanger etc.complete as required. |
| 110 | Supplyingand installation of suitablemotor for idu/odu uints. i/c connection,testing etc. complete as required. |
| 111 | Installation of Split/window type air conditioner including providing and fixing wooden frame for fixing the housing of air conditioner on the existing window testing etc. complete as required. |
| 112 | Supplying and replacement of unserviceable pair of PCBfor both indoor unitand out door unit of air conditioner,suitable for various make of 2 Ton 5 star inverter type air conditioneri.c connection,testing etc. complete as required. |
