|
| 1 | Supply , Installation, Testing and Comissioning ofInverter type Air Cooled Hi Wall split type Air conditioners with latest star rating system as per BEE amended upto date complete with Indoor unit(IDU), Out door unit (ODU), surface / concealed copper Refrigerant piping with insulation (closed cell elastomeric nitrile rubber tubular pipe section) upto 3 Mtr (IDU to ODU), copper power cable upto 3.5 Mtr (IDU to ODU), R-32/R-410 Green Refrigerant, wireless Remote control, suitable for working between 230V +/- 10% with low & high voltage cutoff and50 hz , single phaseACsupply capable of performing cooling, dehumidification, air circulation of following capacity with Scroll / rotary compressor. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR.1.5 TR ISEER not less then 4.6 E-22.24.4 |
| 2 | Supply , Installation, Testing and Comissioning of Air Cooled Cassette typeAir conditioners complete with Indoor unit(IDU), Out door unit (ODU), R-32/R410A Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, +/- 10% 50 Hz ,1 /3 phaseACsupply, apable of performing cooling, dehumidification,Air circulation, filteration & ventilation of following capacity with Scroll /rotary/twin rotary compressor. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . 3.0 TR . E-22.27.1.1.6 |
| 3 | Supply , Installation, Testing and Comissioning of Air Cooled Cassette typeAir conditioners complete with Indoor unit(IDU), Out door unit (ODU), R-32/R410A Green Refrigerant, wireless Remote, inbuilt drain pump, suitable for 400/230V, +/- 10% 50 Hz ,1 /3 phaseACsupply, apable of performing cooling, dehumidification,Air circulation, filteration & ventilation of following capacity with Scroll /rotary/twin rotary compressor. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . 3.8 / 4.0 TR . E-22.27.1.1.7 |
| 4 | Providing & Fixing of IS : 4985 - 2000 Class -4 (10 Kgf / Sqcm) UPVC drain water piping withfittings (IS:7834 & 10Kgf/sqcm) like elbow, socket, Tee, solvent cement jointing,support with MS hanger on ceiling or recessed in wallwith chasing & plastering with 6 mmthickclosedcellelastomeric nitrile rubberinsulation including leakage testing etc. as required of following Nominal sizes. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR .25 mmE-22.40.2 |
| 5 | SITC of Interconnecting refrigerantcopper pipe forsplit/Ductable/ Casseette AC of DHE Grade C12200- ASTM B68, B75, chemical composition of copper %- 99.0 Min and Phosphorus %- 0.015 to 0.040 . For Annealed copper tube :- Tensile strength = 210 Mpa wih elongation % = 40 Min . Ink MarkBrand Printing on Hard Tubes should be present. Piping between each set of indoor & outdoor units of different sizesas per OEM requirement & specifications including class \"O\" Nitrile rubber sleeves, chase cutting, supports, making good the same with sand cement plaster etc. as required. All as per pre approved by Engineer in charge.For additional technical parameters of products/ work, refer Annexure \"A\" attached with this BSR . E-22.59 |
| 6 | Providing&Fixingof240/415VACMCBwithpositive isolationof10kAbreakingcapacity(B/C/Dtripping characteristic as per type of load andsite requirement)4KVimpulsewithstandvoltage,ISImarkedIS 8828(1996) / conforming to IEC 60898-1 2002, IEC 60947-2, low watt losses, trip free mechanisum , energy limitingof class3asperIEC, minimumphase terminationcapacityof35sq.mm.,conductorlineload reversibility , IP 20 contact protection and fitted in existingdistributionboard/sheets,minimumelectrical operation 20,000 upto 20 A rating and 10,000 upto 63 A, 5000 for 80 A & above ratingincluding making connections,testingetc.asrequired.OEMshallhave submit NABL/CPRI/ERDAaccrediatedlabtypetest reports& All as per pre approved by Engineer in charge. Foradditionaltechnicalparametersofproduct/work referAnnexure\"A\"attachedwiththisBSR.Singlepole MCB (With B/C curve tripping Characteristics) 6 A to 32 A ratingE-6.1.1.2 |
| 7 | Supply&fixingMSpowdercoatedstandsuitablefor 1.0/1.5/2.0TroutdoortypeofSplitAC. Allasperpre approved by Engineer in charge.For additional technical parametersofproducts/work ,referAnnexure\"A\" attached with this BSR .E-22.45 |
| 8 | SupplyingandfixingofpowerplugpointwithModular accessories as per PWD specification for electrical Works, on hot dipped galvanized modular box of 1.2 mm thickwithearthingterminal/connectoronsurfaceorin recessedwithsuitablesizeofmodularfaceplacewith gridplateandcoverplateincludingcostof ISImarked modular 16 amp. Switch (IS :3854) and 6/16 amp. socket outlet(IS:1293)makingconnection,testing,etc.as required.Forspecificationof Wiringaccessoriesrefer Chapter E-07 relateditem&Foradditionaltechnical parameters of product / work refer Annexure \"A\" attached with this BSR.E-7.37 |
| 9 | Making of holein R.C.C. slab/wall/beams and masonary wall (width up to 450 mm) by core cutting machine complete as per direction of EI Fromdiameter 100mm to 150mmB-13.34.1 |