Constructing 1.3Km Ht Line With Covered Conductor Constructing 1.3Km Ht Line With Covered Conductor And Relocating Gandhinagar Dtr (Cw-4683-202425- 29) Under Electrical Section Kottarakkara East Of Electrical Division Kottarakkara, kottarakkara-Kerala

Constructing 1.3Km Ht Line With Covered Conductor Constructing 1.3Km Ht Line With Covered Conductor And Relocating Gandhinagar Dtr (Cw-4683-202425- 29) Under Electrical Section Kottarakkara East Of Electrical Division Kottarakkara= 1 Providing one Coil Earth using GI earth wire, digging separate pit at standard distance away from the pole/ structure &back filling 2 Providing one Earth using earth pipe incl. digging & back filling pitand supply of charcoal, salt, sand etc. 3 Fitting one Additional 2.4m/3m Channel cross arm (100x50x6mm), in existing 11KV DP incl. conveyance of materials. 4 Transporting poles by hired vehicle to a distance up to 5km and carrying up to 4 poles excluding loading & unloading 5 Dismantling transformer station in DP structure excluding the rate of dismantling earthing 6 Fitting and erecting one HT DP using PSC pole in position incl. fitting 2 channel cross arms, digging & back filling pit, drawing earth leads 7 Transporting Transformers by hired vehicle upto 5km and upto 2No. of 63 to 250kVA Transformers/RMUs excluding loading & unloading 8 Fitting one Additional 75x40mm, 1.8m channelcross arm in existing single pole incl. conveyance of materials 9 Fitting one Additional 2.4/3m channel cross arm (75x40x6mm), in existing 11KV DP incl. conveyance of materials 10 Loading HT A typepole from the stacking place and unloading the same at work site (transport by vehicle). 11 Fitting and erecting one HTA type pole in position incl. fittingcross arm, digging & back filling pit, drawing earth leads 12 Fitting and erecting one HT PSCtype pole in position incl. fitting cross arm, digging & back filling pit,drawing earth leads 13 Loading HT PSC pole from the stacking place and unloading the same at work site (transport by vehicle). 14 Fitting and providing one HT stay for 11KV pole incl. digging and back filling pit 15 Stringing of one km 3ph11KV line with XLPE insulatedACSR Racoon incl. cutting and removing tree branches wherever necessary. 16 Fitting one set AB switch and giving connection 17 Drilling hole of various sizes on existing Channel/Cross arm 18 Additional rate for excavation of Pit for A type pole in Laterite 19 Fitting and providing one HT Fly stay for 11KV Pole using HT PSC pole incl. digging and back filling pits 20 Fitting and providing one strut using HT PSC pole incl. digging and back filling pit 21 Dismantling one ordinary street light/CFL/LED fitting from existing pole and refitting the same on newly erected pole and reconnecting 22 Dismantling and reconnecting Sph service connection from the OH line incl. lowering down the WP portion 23 Dismantling and reconnecting 3ph service connection from the OH line incl. lowering down the WP portion 24 Transferring LT Sph 2/3 wire OH line to newly erected HT/LT pole and refitting all items to the new pole 25 Transferring LT 3ph 4/5 wire OH line to newly erected HT/LT pole and refitting all items to the new pole 26 Providing Transformer fencing, using 50x50x6mm Angle iron, 40x6mm MS flat and 8mm MS rod as specified, incl. cost of transportation and foundation 27 Fitting one additional HT pin with insulator 28 Fitting one LT 4 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT line 29 Additional rate for refitting/redoing one Shackle set and reshackling one spanwhile renewing any type ofpole 30 Fitting one No. section fuse on LT line with dropping cables, crimping sockets, connecting with bolt and nut etc. 31 Providing yard metalling with 6mm and 40mm thick blue metal as specified after constructing a curb wall 32 Providing stay for LT poles incl. digging & back filling pit 33 Providing/Inserting 3 line spacer on the existing LT OH line 34 Additional rate for excavation of one pit for HT pole/ HT stay in Hard laterite 35 Additional rate for excavation of one pit for HT pole/HT stay in Soft rock 36 Dismantling ( without damage) one LT PSC/RCC pole after disconnecting stays, strut, etc. and stacking the same 37 Dismantling one damaged LT PSC/RCC pole after disconnecting stays, strut etc. and stacking the same 38 Erection of one 100kVA Transformer to existing DP and giving connections, incl. loading & unloading, excloding transportation 39 Fitting one additional fuse unit and giving connection from Transformer to fuse and DB to LT OH line 40 Dismantling one section fuse 41 Fitting one LT 2 line cross arm on HT or LT existing poles incl. fitting insulators and binding the same with LT line 42 Pole numbering using printed aluminium sheets / painting the surface of pole with anti algal yellow paint and painting letters with black paint as specified incl. cost of paint. 43 Providing concrete muffing (0.45x0.45x1.5m) inclusive of cost of all materials(as per specification) 44 Additional rate for excavation of one Earth Pit (2.5m depth) in laterite 45 Dismantling one Transformer upto 160kVA from structure and loading to vehicle incl. disconnecting HT/LT/Earth connections 46 Dismantling( without damage) LT stay incl. digging pit in all classes of soil and back filling 47 Drilling oval shaped hole of various sizes on existing Channel/Cross arm/GI/MS cleat etc. 48 Installing one DTR meter with box on existing poles and giving the complete connections incl. conveyance of materials. 49 Fitting 5 channel cross arms, AB switch, DO fuse, LA, HT& LT connections on existing DP, 3 LT fuses. 50 Additional rate for excavation of Pit for A type pole in Hard Laterite 51 Additional rate for excavation of one Pit for HT pole/ HT stay in laterite

INR 5900 /-

INR 27300.0 /-

INR 10.88 Lakhs /-

FileName	File Description	File Size
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB
Click here to download tender document	Tender Documents	0 KB