}

Tender For Painting Of Roof Sheet At Dalhousie Cantt, dalhousie-Himachal Pradesh

Military Engineer Services has published Tender For Painting Of Roof Sheet At Dalhousie Cantt. Submission Date for this Tender is 02-06-2025. Painting Tenders in dalhousie Himachal Pradesh. Bidders can get complete Tender details and download the document.




Tender Notice

49112658
Tender For Painting Of Roof Sheet At Dalhousie Cantt
Open Tender
Indian
Himachal Pradesh
Dalhousie
02-06-2025

Tender Documents

Tender Details

Tender For Painting Of Roof Sheet At Dalhousie Cantt; 1 M&L for preparation of old painted steel and iron surfaces of any description and in any position over 10 cm width or girth as in roof, not other wise specially described and applying one coat ofsynthetic enamel paint complete all as specified and directed by Engr-in Charge. 2 M&L for removing old paint by paint removers and cleaning with scrapers, any number of coats, any width or girth as in roof, not other wise specially described and applying two coats ofsynthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in Charge. 3 M&L for preparation of old painted steel and iron surfaces of any description and in any position over 10 cm width or girth (Other than roof) not other wise specially described and applying one coat ofsynthetic enamel paint complete all as specified and directed by Engr-in Charge. 4 M&L for preparation of old wooden surfaces ofany description and applying one coats of synthetic enamel paint over 10cm width or girth complete all as specified and directed by Engr-in Charge. 5 S&F for pre- painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in door and window chajja including grooving of plaster surface of wall and making good surface with plaster, fixed with self tapping screws including dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern complete all as specified and directed by Engr-in Charge. 6 S&F for pre-painted plain, galvanised, mild steel sheet 0.63mm thick of any colour as in valley gutters, drip and straight flashings (length and girth as fixed) with grade of zinc coating 275, fixed with self tapping screws on mild steel frame support,including dismantling of plain or corrugated steel sheeting, any gauge and thickness including Nainital or similar pattern complete all as specified and directed by Engr-in Charge. 7 Dismantling timber fillets, rails, posts rafters purlins etc under 40 Sqcm in section fixed in unframed work position complete all as specified and directed by Engr-in Charge. 8 M&L for Mild steel framed work as in doors & window chajja,fixed with drilling and fastening to wall and flat iron for valley gutter support fixed with self tappping screw or welding with roof rafter complete all as specified and directed by Engr-in Charge. 9 S & F Roof trusses (Framed), trussed , purlins, crane gantries, rails and fastenings and heavy bracket framing (beam, tee, angle, channel or flat sections ) including distance pieces cleats etc FE-410W (Gde E-250) quality A complete all as specified and directed by Engr-in Charge. 10 S & F 110 mm bore PVCPipes single socketed, in any length with rubber ring joints, fixed in wall with cladding for rain water down pipe complete all as specified and directed by Engr-in Charge. 11 S & F 110 mm bore PVCbends with access door including for all necessary extrajoints cuttings and waste toany radius complete all as specified and directed by Engr-in Charge. 12 S&F for Drop ends (for spigot or socket ends) or nozzles complete all as specified and directed by Engr-in Charge. 13 S&F for Stop ends (for spigot or socket ends) complete all as specified and directed by Engr-in Charge. 14 M&L for preparation new steel surfaces, of any description, over 10cm width or girth and applying two coat of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed by Engr-in Charge. 15 M & L for preparing new steel surfaces of any descripation not exc 10cm width or girth and applying, two coats of synthetic enamel paint over a coat of red oxide zinc chrome primer complete all as specified and directed.

Key Value

Document Fees
INR 500 /-
EMD
INR 18000.0 /-
Tender Value
INR 9 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail