|
| 1 | Taking down chowkatsor frame with shutters(without taking off shutters from the frame not exceeding 1.50 sqm each & removing to store complete all as specified and directed by Engr-in Charge. |
| 2 | Taking down shutters& refixing in same opening of any description exc 1 sqm and n exc 2 sqm each and removing from site complete all as specified and directed by Engr-in-Charge. |
| 3 | Taking down shuttersand refixing in same opening of any descriptionexc 2 sqm each and removing from site complete all as specified and directed by Engr-in-Charge. |
| 4 | Resecuring or easing & adjusting without taking down shutter of any description exc 1 sqm and n exc 2 sqm each complete all as specified and directed by Engr-in-Charge. |
| 5 | Resecuring or easing & adjusting without taking down shutter of any description exc 2 sqm each complete all as specified and directed by Engr-in-Charge. |
| 6 | Repair 1st class soft woodPieces, small let in for making good where hinges, etc. have been removed from chowkhats or frames and refixing, joinery, etc. including painting or oiling to match, if required andrefixing in same opening of any descriptionany type, size door window & ventilator complete all as specified and directed by Engr-in Charge. |
| 7 | Repair Beads, straight (any size) for glazed or gauzed joinery,renewed, including mitres etc.. and removing old beads to store complete all as specified and directed by Engr-in Charge. |
| 8 | Taking down chowkatswith shutters(without taking off shutters from the frame exceeding 1.50 sqm each but not exceeding 4 sqm) complete all as specified and directed by Engr-in Charge. |
| 9 | S&F PVC doorframe of size 50x47mm made out of 5 mm plain colour PVC sheet reinforced with MS square tube supplying and fixing in opening as perspecification and designs and making good as per previous condition complete all as specified and directed by Engr-in Charge. |
| 10 | S&F Factory made solid panel PVC door shutter 30mm thick (style) consisting of frame made out of MStubes for top and bottom rails, MS frame shall be covered with heat moulded plain colour PVC’C’ channel heaving a PVC sheet strip of 20mm width suck inside complete all as specified and directed by Engr-in Charge. |
| 11 | S&F Aluminium handle cast type anodized 125 mm long complete all as specified and directed by Engr-in Charge. |
| 12 | S&F Aluminium anodized barrel tower bolt of extended section and fixed 200 mm long complete all as specified and directed by Engr-in Charge. |
| 13 | S&F 75 mm long butt hinges extruded almiunium alloy with galvanised mild steel hinges pin, anodised and fixed complete all as specified and directed by Engr-in Charge. |
| 14 | S&F 2nd class hard wood plain solid, straight chowkats and frames wrought,frame rebated on the solid,rounded or chamfered,put together with glue pinned at joints,supplied and fix as in cupboards complete all as specified and directed by Engr-in Charge. |
| 15 | S&F 35mm thick 2ndclass hard wood glazed Skelton shutters open rebated and prepare to receive glass gauges etc withoutsash bars edges of gramng plainchamferedor roundedfluted without and mixed beadsfor securing gases etc size ofchambers as specified in SSR Part I sector 8-20 (a) fitted tochowkat complete all as specified and directed by Engr-in Charge. |
| 16 | S & F Factory made Plain framed, panelled shutter IInd class hardwood rail and style 35 mm thickness (two panel) with lock rail and panel of 9 mm B.W.P. commercial ply or 12 mm veneered particle board with commercial veneering on both faces. The size of rail and stile as per IS : 1003 (Part I), kiln seasoned and chemically pressure treated complete all as specified and directed by Engr-in Charge. |
| 17 | S&F Aluminiumbarrel tower bolt 200mm long stove enameled black complete all as specified and directed by Engr-in Charge. |
| 18 | S&F Aluminium pressed handles oval type enameled black 150mm size complete all as specified and directed by Engr-in Charge. |
| 19 | S&F Aluminiumsliding door bolt 300 mm long plate type stove enameled black with bright bolt not less than12mm dia complete all as specified and directed by Engr-in Charge. |
| 20 | S&F in repair MS 300mm ordinaryrat tail rod pattern springs including roller and roller plate complete all as specified and directed by Engr-in Charge. |
| 21 | S&F Galvanished mild steel wire cloth 0.56mm nominal dia of wire and average width of aperture 1.18 mm and fixed with tinned tacks or galvanished wire staples complete all as specified and directed by Engr-in Charge. |
| 22 | S&F in repairgalvanized mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm and fixed with tinned tacks or galvanished wire staples, complete all as specified and directed by Engr-in Charge. |
| 23 | S&F MS flat 25x3mm thick as in hold fast confirming to Fe410-0 & Fe 310-0 complete all as specified and directed by Engr-in Charge. |
| 24 | M&L preparing surface ofnewly wood and woodbased surfaceon any description not other wise described over 10cm with or grith and applying two coat of synthetic enamel paint over a coat of pink primer complete all as specified and directed by Engr-in Charge. |
| 25 | Steel window 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x35mm double rebated comprises one gauged and another glazed skelton shutter(Glass shutter and Wire Mesh Shutter) ERW Sec 50mm x 20mm and 1mm thick with two openable leaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No\"s for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (vii)10 mm square gaurd bar complete,fixing glass 3 mm thick ordinary quality and glazing with oil putty completed , galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm fixing completed and providing two coats of synthetic enamel paint over surface,including making good adjoining conditionall as specified and directed by Engr-in Charge.Note:- Measurment of above complete description shall be measured outer to outer frame of window ( Lenght X Height) as a single window complete all as specified and directed by Engr-in Charge. |
| 26 | Steel ventilator with top hung shutter 1.25mm thick box type (Primer coated) ERW hollow P section of size 85mm x35mm double rebated comprisesgauged, glazed skelton shutter ERW Sec 50mm x 20mm and 1mm thick withleaf consiting two Nos sash bar of T-Section 20mm x 3mm complete welded to frame with one vertical mullion of ERW box type T-section of size 30mm x 25mm and 1.25mm thick including cutting holes and making good dismantled portion in PCC M-15, type B-0 (04 No\"s for each window, steel duly painted with one shop coat of zinc chromate primer on prepared surfaces) and finishing the surfaces to match with existing including following fitting welded to frame shutter:- (i) Hold fast, 150mm long of 12mm x 3mm made to shape -04 Nos per window. (ii) Handle of Z section 20mm x 25mm, 100mm long -1 No per leaf. (iii) MS tower bolt 150mm long - 2 No per leaf (iv) Z section 20mm x25mm, 100 long stopper - 1 No per leaf. (v) Cleat 65mm long of hollow square 15mm x 20mm x 63mm welded to hinge -1 No per leaf. (vi) Mild steel pintle hinge of size 75mm x 12mm - 2 Nos per leaf. (vii) Flat iron fillets of size 20X3 mm for fixing wire gauge. (viii) Fabrication & fixing arrangement as per manufactur instruction , 10 mm square gaurd bar complete,fixing glass 3 mm thick ordinary quality and glazing with oil putty completed , galvanized mild steel wire cloth 0.56mm nominal dia of wire and average width or aperture 1.18mm fixing completed and providing two coats of synthetic enamel paint over surface, all as specified, including making good adjoining conditionand directed by Engr-in Charge. Note Measurment of above complete description shall be measured outer to ouetrframe of window( Lenght X Height) as a single window complete all as specified and directed by Engr-in Charge. |
| 27 | Taking down aluminium door or window shutter and Refixing in the same opening after tightening of members, refixing of glass panes and rubber bids inluding adjusting of old hydraulic door closer complete complete all as specified and directed by Engr-in Charge. |
| 28 | S&F anodised aluminium frame for doors, window, ventilators and partition wall with with one or more rebate including joiing cleat forfixing etc complete all as specified and directed by Engr-in Charge. |
| 29 | S&F anodised aluminium door shutter,aluminium section wt 0.55 kg / mtr including necessary joining cleats ,glazing clips, rubber neoprene packing , handles 2 Nos. in each door , hinges , anodised aluminium snap beading screws etc complete all as specified and directed by Engr-in Charge. |
| 30 | S&F anodised aluminium window /ventilator shutter, side hung type without sash bar, aluminium section wt 0.55 kg / mtr including necessary joining cleats, glazing clips, rubber packing, anodised aluminium snap beading screws, anodised aluminium fitting such as peg stays 150 mm long (1 No) hinges type B-21 100mm long (2 Nos) suitable handle (1 No) complete all as specified and directed by Engr-in Charge. |
| 31 | S& F Anodised aluminium grill (anodised transparent or dyed to required shade according to IS: 1868 with minimum anodic coating of grade AC 15) of approved design/pattern, with approved standard section and fixed to the existing window frame with C.P. brass/ stainless steel screws @ 200 mm centre to centre, including cutting the grill to proper opening size for fixing and operation of handles and fixing approved anodised aluminium standard section around the opening, complete all as specified and directed by Engr-in Charge. |
| 32 | S&F sheet glass 4.80 mm thick ordinary quality and fixed in alum section in squares not exceeding 0.50 sqm in each pane complete all as specified and directed by Engr-in Charge. |
| 33 | S&F in repairs aluminium (die cast) body,door closer hydraulically regulated designation No. 3 , universal type , suitable for door shutters of 851 to 1000 mm in width and weight between 61 to 80 kg and fixed complete all as specified and directed by Engr-in Charge. |
| 34 | S & Fin repairs AluminiumMotrice lock4 levers and 75mm size for aluminium doors complete all as specified and directed by Engr-in Charge. |
| 35 | S&F for 150mm floor door stopper of aluminium alloy body and tongue,anodised with hard drawn steel spring, fixed in floor complete all as specified and directed by Engr-in Charge. |
| 36 | S&F Aluminium powder coated three track sliding windows (with three sliding shutters, (One with stainless steel jally and two with glasspanes)aluminium frame not less than 1.63kg / RM aluminium sections not less than 1.1kg per meter for bottom track and top track and side track 0.98 kg per metre, bottom shutter frame 0.55 kg per metre, top shutter frame 0.47 kg per metre, shutter sides, 0.47 kg per metre and interlock sides 0.45 kg per metre including suitable nylon beading channel gasket, nylon rollers Maruthi lock with handles etc complete all as specified and directed including 4 mm thick tinted Glass panes and stainless steel wire mesh complete all as specified and directed by Engr-in Charge. |
| 37 | S&F Aluminium ventilatorswith frame powder coated with 4mm thick frosted glass louvers and incl 0.36mm dia and 1.18mm aperture stainless steel jally (Fixed outside of ventilator) complete all as specified and directed by Engr-in Charge. |
| 38 | S & F repairs 18/19 mm thick prelaminated particle board ,exterior grade,prelaminated on both sides with decorative choice lamination, complete all as specified and directed by Engr-in-charge. |
| 39 | S&F Aluminium handle cast type anodized 100 mm long as in cupboards complete all as specified and directed by Engr-in Charge. |
| 40 | S & F of 100mm hasp and staple, mild steel, wire type, stove enamelled black, including bolt to hinge plate and fixed with screws complete all as specified and directed by Engr-in Charge. |
| 41 | S & F of 40mm dia, cupboard knobs fixed with nut, screw and washer of mild steel, bright finished complete all as specified and directed by Engr-in Charge. |
| 42 | S & F of 30 mm width of flaps Continuous (piano) hinges, mild steel, bright finish or electro galvanised complete all as specified and directed by Engr-in Charge. |
| 43 | S & F continous piano hinges mild steel bright finish or galvanised of 30mm width complete all as specified and directed by Engr-in Charge. |
| 44 | S&F in sheet glass 3 mm thick ordinary quality and glazing with oil putty or wooden beads in squares not exceeding 0.50 sqm in each pane including hacking out old broken glass (any size, thickness, quality or description from metal frame including punching or drilling out old glazing pins/ spring clips complete all as specified and directed by Engr-in Charge. |
| 45 | S & F PVC wall panelling, hollow cored, 5mm thick, decorative designs with smooth surfaces , fire resistant, water and heat proof, tongue and grooves edges for easy assembly with all acessories such U cap ,end cap, Tee, plugs, fillets and srews etc and fixing as per manufactures instructions and fixing complete all as specified and directed by Engineer-in-Charge. |
| 46 | M & L for preparation of old painted wooden surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in Charge. |
| 47 | M & L for preparation of old painted steel surfaces of any description over 10 cm width or girth not otherwise described and applying one coat of synthetic enamel paint complete all as specified and directed by Engr-in Charge. |
| 48 | S&F 25 mm dia drapery curtain rod with decorative end knobs complete with brackets and fixed to walls complete all as specified and directed by Engr-in Charge. |
| 49 | M & L for preparation and applying two coats of synthetic enamel paint over one coat of red oxide primer on new steel surfaces of any description over 10 cm width or girthcomplete all as specified and directed by Engr-in-charge. |
| 50 | S & F 600 x 450 mm size beveled edge mirror 5mm thick of selected quality glass mounted on 6mm thickcommercial plywood and fixed with wooden plugs with chromium plated brass screws and cup washers complete all as specified and directed by Engr-in-charge. |
| 51 | M & L runnung welding in repairs thickness of metal exc 6mm n exc 9mm like gate, door, window, etc. complete all as specified and directed by Engr-in-charge. |
| 52 | M&L 20-25mm thick machine cut kota stone slab (table rubbed and polished) as in flooring laid over and including 15 mm thick screed bed or bedding layer in CM (1:6), set and jointed with grey cement slurry mixed with pigment to match the shade of slab including cutting, rubbing, grinding and mirror polishing upto desired satisfaction of Engr In Charge complete all as specified and directed by Engr-in-charge. |
| 53 | M& Lin old surfaceMirror polishing on marble / granite / kota stone / stone work where ever required to give high gloss finish completedall as specified and directed by Engr-in-charge. |
| 54 | M&L for walling of random rubble stone masonry uncoarsed, well bonded bedded and soilidly hearted built in CM 1:6, including demolition of brick workor stonework or precast concrete articles and precast concrete block walling ,built in cement mortar including allquoins, arches pillars etc but excluding ashlar facings ,dressed stonework and precast concrete articles and stacking the serviceable materials within 100m and disposal of unserviceable material, debris and rubbish to a distance not exceeding 100m, complete all as specified and directed by Engr-in Charge. |
| 55 | M&L for brick work with old size burnt fly ash bricks, straight or curved on plan exceeding 6 mtr mean radius built in CM 1:6including demolition of existing brick work and removing rubbish off the premises complete all as specified and directed by Engr-in Charge. |
| 56 | M&L for rendering 15mm thick (in two layer of 10mm+5mm) on brick or concrete/stone surfaces in cement mortar 1:4 surface finished even and smooth without using extra cement complete all as specified, including taking down cement plaster from stone/brick walls, racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in Charge.Note:- Necessary additional dubbing if required will be done by contractor and nothing extra cost is admissible in this account. |
| 57 | M&L for rendering 15 mmthick (in two layer of 10mm+5mm) on brick or concrete/stone surfaces in cement mortar 1:6 surface finished even and smooth w/o using extra cement complete all as specified and as directed,including taking down cement plaster from stone/brick walls, racking out joints hacking for key, scrubbing down with water etc complete all as specified and directed by Engr-in Charge.Note:- Necessary additional dubbing if required will be done by contractor and nothing extra cost is admissible in this account. |
| 58 | M&L for rendering 20mm (in two layer of 10mm+10mm) thick on stone masonry surfaces or surfaces other than fair faces of brick work or one side of lathing in CM (1:4) surface finished even and smooth without using extra cement complete all as specified and directed by Engineer-in-Charge Note:- Necessary additional dubbing if required will be done by contractor and nothing extra cost is admissible in this account. |
| 59 | M & L for water proof cement based putty @ 2 kg (undiluted) per Sqm of average thickness 2mm over the plastered/ old prepared painted surface of walland sanding of the putty surface with mechanical wall sander (having mechanical vaccum mechanism) having RPM not less than 1500, sanding pad of 240 grit or above to make the surface free from dust etc by skilled labour as per the following steps:-Step 1 :- Mix the putty powder by adding water as per manufacturer\"s instruction and mix it with putty mixer with the mixing capacity of min 2.5 kg putty per minute.Step 2 :- Apply the first coat of the prepared mixer with the help of fully automatic airless spray machine of putty application finishing the surface even and smooth in level without any undulations.Step 3 :- Allow 6-8 hrs time to dry the putty surfaceNote: Where thickness of putti is required more than 2mm thick, the same shall be make good using POP and than putty shall be applied to obtain even & smooth surface. Nothing extra shall be admissible on this account. |
| 60 | M&L for applying two coats of oil bound distemper on wall on new plasted surfaces including preparation over a coat of primer complete all as specified and directed by Engr-in Charge. |
| 61 | M&L for applying two coats of cement base paint over a coat of primer on newly plastered surfaces of wall with primer coat complete all as specified and directed by Engr-in Charge. |
| 62 | M & L Mat finish, premium quality, joint free (edge cut), coloured/ printed non -Skid ceramic tiles 7 to 8 mm thick (square/ rectangular) area of each tile not exceeding 0.36 sqm, as in floors etc. set and jointed in neat cement slurry over 15mm thick bedding layer in cement mortar (1:4) including necessary cutting and waste as per site requirement pointed in white or coloured cement to match, including dismentling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engr-in Charge.Size/Shade/Colour of tile shall be approved by the AGE(I). |
| 63 | Virified Ceramic tiles 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match in floors over 15mm thick screed bed or bedding layer of CM (1:6) etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match. including dismentling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engr-in Charge.Size/Shade/Colour of tile shall be approved by the AGE(I). |
| 64 | M&L Glazed ceramic colouredtilesof size450mm x 350 mm x7 mm thick as in vertical surfaces, set and jointed in neat cement slurry and pointed with white or coloured cement to match the shade of tile over 10 mm thick cement screed in cement mortar 1:3 including dismentling floor, hearth or wall tiling including cement mortar bedding complete all as specified and directed by Engr-in Charge.Size/Shade/Colour of tile shall be approved by the AGE(I). |
| 65 | M&L Glazed ceramic tiles in vertical surface 300x200x 7 mm thick set and jointed in neat cement slurry and pointed in white or colour cement to match of tile over and including 10 mm thick cement screed in cement mortar 1:3, including dismantling floor, hearth or wall tiling including cement mortar bedding, removing serviceable tiles to store and rubbish off the premisescomplete all as specified and directed by Engr-in Charge. Size/Shade/Colour of tile shall be approved by the AGE(I). |
