|
| 1 | Structural steel work rivelad, boiled or wedded in built up sections, trusses and frame work, including cutting , hoisting , fixing in posit on and applying a painting coat of approved steel primer at complete:DSR 10.2 |
| 2 | Providing corrugated G.S. Sheet roofing including vertical/ curved surface fixed with polymer coated J ro L bolts and nuts 8 mm diameter with bitumen and G.I. linpet washers or with G.I. limpet wahers filled with white lead, including a coat of approved steel primer and two coat of approved paint on overlapping of sheets complete (up to any pitch in horizontal/ vertical or curved surfaces), excluding the cost of purlins rafters and trusses and including cutting to size and shape wherever required DSR. 12.1.1 |
| 3 | Earth work excavation in ordenry soil as per SI No. 251 |
| 4 | Providing and laying of 1:6:12 CC in foundation in cement sand and brick ballast 40 mm gauge including all required complete for proper completion of work as per S.I. no 273 |
| 5 | WBM Grading III - Providing, laying, spreading and compacting stone aggregates of specific sizes to water bound macadam specification including spreading in uniform thickness, hand packing, rolling with three wheel 80-100 kN static roller in stages to proper grade and compacting in base of road. |
| 6 | Provideing of laying interlocking concrete block pavements having thickness 80 mm as per technical specification clause 1504. |
| 7 | Providing andfixing up to floor five level precast cement concrete string or lacing courses copings, bed plates, anchor blocks, plain window sills, shelves, louvers, steps stair cases, etc. including hoisting and selting in position with cement mortar 1:3 (1cement:3 coarse sand ), cos fo required centering complete. D.S.R. 4.5.1 |
| 8 | M1 150 class in foundation with 1:4 cement and coarse sand mortar including all complete SI No. 305 a |
| 9 | PCC work with 1:2:4 with cement, coarse sand & 20 mm stone grit including all material labour etc complete As per SI No. 601 |
| 10 | 12 mm thick cement plaster with 1:4 cement coarse sand mortar including all material labour etc complete as per SI no 305 A and anylises |
| 11 | RCC work in slab with 1:2:4 with cement, coarse sand & 20 mm stone grit including all material labour etc complete SI no 284 |
| 12 | P/L of MS work in slab as reinforcement including all material TNP etc completeSI No 504 |
| 13 | Providing and fixing stainless steel (grade 304) railing made of hollwo tubes, channels, paltes etc. including velding grading building and making curvature (wherever required) and fixing the same with necessary stainless steel nuts and bolts comple i/c fixing the ralling with nacessarty accassories & stairless stool dash stairless steel bolts etc. of required size on the top of the floor or the side of waist slab with arrangement as per approval of Engineer-in charge DSR. 10.28 |
| 14 | Wiring for light point/ fan point/ exhaust fan point/ callbellpointwith1.5sq.mmFRLSPVCinsulated copper conductor single core cable in surface / recessedmediumclassPVCconduit,withmodular switch,modularplate,suitableGIboxandearthing the point with 1.5 sq.mm FRLS PVC insulated copperconductor single core cable etc. as required. DSR 1.10.1 |
| 15 | Wiring for light/power plug with 4x4sq. mmFRLS PVC insulated copper conductor single core cable in surface /recessedmedium classPVC conduit along with 2No. 4 sq.mm FRLS PVCinsulted copper conductor single core cable for loop earthing as required code No. 1.13 |
| 16 | Wiringforcircuit/submainwiringalongwithearth wirewiththefollowingsizesofFRLSPVCinsulated copper conductor, single core cable in surface/ recessed medium class PVC conduit as required. 2 X2.5 sq. mm + 1 X 2.5 sq. mm earth wire DSR 1.14.2 |
| 17 | AddforInvertorwiringinwiringpointfor Light/Fan/Plug with 1.5 mm Cu Wire. UPPWD 189(A) |
| 18 | Supplying and fixing suitablesize GI box with modularplateandcoverinfrontonsurfaceorin recess,includingprovidingandfixing3pin5/6A modularsocketoutletand5/6Amodularswitch,connections etc. as required. DSR 1.31 |
| 19 | Supplyandfixingof LEDTubeLightbattenfittingsuitableforupto1X22wattLEDtubelighton surface complete in all respect. - CAT-AAA UPPWD 1413(A) |
| 20 | Supplyandfixingof LEDStreetlightFitting having die cast aluminium body and diffuser with driver set suitablefor 45 wattto50Watt.ConfirmingtoIP66protection complete in all respect. CAT-AA UPPWD 1421 |
| 21 | supply ofceilling fan with fan motor of A.C parmanent insulation capicitor rating conforming bee5 star rating and IS:374/79 and alsocomply with IS:1709/1984 with latest amendment the rated voltage220/240 volts 50Hz,1-ph AC the fan assemble shouldconsist of down rod blades,shacklescanopies etcand with double ball bearing system(BEE 5 star rated- 1200/900 sweep) M.R |
| 22 | supply of300mm sweep exhaut fan MR |
| 23 | Extraforfixingthelouvers/shutterscompletewith frame for a exhaust fan of all sizes DSR 1.51 |
| 24 | Supplyingandfixingfollowingway,horizontaltype threepoleand neutral, sheetsteel, MCB distribution board, 415 V, on surface/ recess, complete with tinned copper bus bar, neutral bus bar, earth bar, din bar,interconnections,powderpaintedincluding earthingetc.asrequired.4way(4+12),Doubledoor DSR 2.4.1 |
| 25 | Supplyingandfixing5Ato32Arating,240/415V, 10kA,\"C\"curve,miniaturecircuitbreakersuitable forinductiveloadoffollowingpolesintheexisting MCB DB complete with connections, testing andcommissioning etc. as required. Single pole DSR 2.10.1 |
| 26 | SupplyandburringofSafeEarthingElectrodeT-19 (HotDipGalvanized),Lengthupto2000mm,outer pipe 50mm, inner pipe 25, terminal Dia 12 mm, outer GIpipeof16swg andinnerGI pipeof 12swgwith HotDipGalvanizationupto100micronfilledwith crystalline conductive mixture (CCM) having anti corrosive&conductivepropertywith50kgs activated soil (BFC) capable of reducing the soil resistivitywithgoodmixtureofretainingcapacity along with 30cm square C.I. frame with hinged cover & masonry husing (from electrode terminal to switch board, cost of 25 x 3 G.I . strip will be extra)Make: Asapproved in U.P. P.W.D., & C.P.R.I. Certified. UPPWD 725(A) |
| 27 | Supplying & Laying of 25mmx3mm G.I. Strip forearthingpurposeasrequiredcompleteinall respects.UPPWD 716 |
| 28 | Supply and fixing of batten/angle batten/holder complete in all respetc. S.I.No. 405 |
| 29 | suply and fixing LED BulbM.R. |
