Tender For Special Repair Of Internal Roads (Balance Phase-Iii) In Sector-20 P-Iii Sirsa. “Providing And Laying Of 20Mm Thick Premix Carpet With Tack Coat And Providing And Applying Thermoplastic Paint And Fixing Of Cateyes On Internal Roads In Sector-2, Sirsa-Haryana
TDR : 49107102
Tender Notice
BOQ
Expired
Sirsa
Haryana
Tender For Special Repair Of Internal Roads (Balance Phase-Iii) In Sector-20 P-Iii Sirsa. “Providing And Laying Of 20Mm Thick Premix Carpet With Tack Coat And Providing And Applying Thermoplastic Paint And Fixing Of Cateyes On Internal Roads In Sector-2
Name of WorkSPECIAL REPAIR OF INTERNAL ROADS (BALANCE PHASE-III) IN SECTOR-20 P-III SIRSA. “PROVIDING AND LAYING OF 20MM THICK PREMIX CARPET WITH TACK COAT AND PROVIDING AND APPLYING THERMOPLASTIC PAINT AND FIXING OF CATEYES ON INTERNAL ROADS IN SECTOR-20P-III SIRSA AND ALL OTHER WORKS CONTINGENT THERETO” (INCLUDING THREE YEARS MTC. AND DEFECT LIABILITY PERIOD FREE OF COST)A/C Rs. 28.52 Lacs
Sl. No.
Item Description
1
[34.26]Road Marking with Hot Applied Thermoplastic Compound with Reflectorising Glass Beads on Bituminous Surface Providing and laying of hot applied thermoplastic compound 2.5 mm thick including Reflectorising glass beads @ 250 gms per sqm area, thickness of 2.5 mm is exclusive of surface applied glass beads as per IRC:35 .The finished surface to be level, uniform and free from streaks and holes. [Through Rate]
2
[34.34]Moulded Shank Road Stud Supplying and fixing of single mould twin shank reflective road studs made out of poly carbonate/ABS moulded body and reflective panels with micro prismatic lenscapable of providing total internal reflection of the light entering the lens face with retro reflectance and chromaticity values @ ASTM E 809 & ASTM D 4280. The detailed specifications and the product shall conform to ASTM D4280 and ASTM E 809. The raised pavement marker shall also meet all the testing conditions of ASTM D4280 like abrasion resistance and fixed to the road surface using the epoxy adhesive. Two cylinderical polymer shanks of not less than 20 mm diameter and not less than 30 mm length shall be moulded in the RPM body. The marker shall support a load of 13635 Kg tested in accordance with ASTM D4280.The marker shall withstand flexural strength of 909 kgf force in accordance with ASTM D4280. Marker lenses shall be moulded of Polycarbonate or methyl Methacrylate conforming to ASTM D788. The supplier shall provide a 2 years warranty for satisfactory field performance as per clause 804.7.3 of MORT&H 5th revision specifications. [Through Rate]
3
Providing and applying tack coat with penetration grade bitumen VG-10 using bitumen pressure distributor at the rate of 0.30 kg per sqm on the prepared bituminous/ granular surface cleaned with mechanical broom as per technical clause 503 of MORTandH specifications
4
Providing, laying and rolling of open – graded premix surfacing of 20 mm thickness Type B composed of crushed stone aggregates of specified grading premixed in a continuous type of hot mix plant of appropriate capacity not less not less than 75 tonne per hour, with bituminous binder VG - 10 @ 1.9 kg per sqm, laid with Paver Finisher
We takes all possible care for accurate & authentic tender information, however Users
are requested to refer Original source of Tender Notice / Tender Document published by
Tender Issuing Agency before taking any call regarding this tender.
