Tender For Construction Of Swimming Pool At Vigyanasagar (Meti), Girinagar, Kochi.; 1 Felling and removing trees of the girth (measured at a height of 1 m above ground level) upto 180cm, including cutting of trunks and branches, removing the roots and disposal of unserviceable material to the designated dumping ground or any other area under contractors responsibility, including loading, transporting, unloadingfor all leads including all lifts involved (above 200 cm girth). All statutory clearance & legal compliances shall be contractors responsibility. Rate is inclusive of backfilling & levelling the ground. 2 Boring, providing and installation of bored cast-in-situ reinforced cement concrete piles of grade M-30 using Tractor mounted rotary rig drilling using Direct mud circulation (DMC), having cement not less than 400kg/m3 with 20mm nominal size hard granite broken stone of specified diameter and length below the pile cap, to carry a safe working load not less than specified as per approved drawing, excluding the cost of steel reinforcement but including the cost of cement, cost of boring with bentonite solution and temporary casing of appropriate length for setting out and removal of same and the length of the pile to be embedded in the pile cap etc.The rotary rig is to be replaced with percussion chiselusing tripod and mechanical Winch machine for clearing and flushing, including removal of excavated earth with all its lifts and leads and clearing the bore hole and disposal of bore muck as per the instruction of statutory authority(length of pile for payment shall be measured up to bottom of pile cap). Rate is inclusive of cost & conveyance of hire charges of machines, materials, labours and other incidentals complete in all respect 3 a. 500 mm dia piles 4 b. 700 mm dia piles 5 Conducting in-situ Standard Penetration Test at the pile terminating pointinside the pile bore hole to ascertainthe N value, all complete and as directed by the Engineer-in-Charge. Rate is inclusive of hire charges of tools and plants, all labour, other incidentals etc. complete. 6 Chipping carefully cut off portion of piles without injury to the piles, removing and disposal of demolition waste as per the instruction of statutory authority , cleaning and straightening reinforcement from R.C.C.etc.complete. 7 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 sqm on plan) including getting out and disposal of excavated earth within CSL premises, disposed earth to be levelled and neatly dressed -All kinds of soil 8 Earth work in excavation by mechanical means (Hydraulic excavator)/manual means over areas (exceeding 30 cm in depth, 1.5 m in width as well as 10 Sqm on plan) including disposal of excavated earth within CSL premises, disposed earth to be levelled and neatly dressed. Rate includes cost for providing shoring for side protection and bailing out water -All kinds of soil 9 Supplying, providing and laying gunny bags filled with quarry sandto get30cm thick levelled and consolidated surface below PCC of pilecap & plinth beam. The mouth of gunny bags shall be stiched and the voids betweengunny bags are to be filled with quarry sand. Then 400G polythene sheet shall belaid over the levelled surface to receive PCC. The rate shall include cost and conveyance of allmaterials, bailing out water, all labour charges, etc complete. 10 Providing and laying in position cement concrete of specified grade including cost of cement, the cost ofcentering , curingand shuttering - All work up to plinth level: 1:4:8 (1 cement : 4 coarse sand : 8 graded stone aggregate 40 nominal size) 11 Providing and laying in position ready mixed M-30 grade concrete for reinforced cement concrete work, using cement content as per approved design mix and transported to site of work in transit mixer for all leads, having continuous agitated mixer, manufactured as per mix design of specified grade for reinforced cement concrete work.The rate includes the cost of precast cover blocks, cement, admixtures in recommended proportionsto accelerate/ retard setting of concrete, improve workability & waterproofing without impairing strength and durability, pumping, centering, shuttering, levelling, finishing, curing, etc. complete as approved by CSL. 12 a. All works upto plinth level for pilecap, foundation, grade beam, grade slab, etc (cement content 400kg/cum) 13 b. All works above plinth level for column, slab and beam etc. (cement content 400kg/cum) - including suitable shuttering for sloping floor 14 c. All works above plinth level for swimming pool wall (cement content 400kg/cum) 15 Providing and Placing in position suitable PVC water stops for construction of RCC member and fixed to the reinforcement with binding wire before pouring concrete etc. complete Serrated with central bulb (225 mm wide, 8-11 mm thick). Rate is inclusive of cost & conveyance of all materials, fixtures/binding for placing in position, labour, etc. complete in all respect. 16 Supply and providing Steel reinforcement Thermo-Mechanically Treated bars of grade Fe-500D for R.C.C. work including straightening, cutting, bending, placing in position, binding and welding, if required, all complete as per the site requirement. Rate is inclusive of cost and conveyance of machineries, labour, material, tools and tackles, others incidentals etc. 17 Filling available excavated earth (excluding rock) in trenches, plinth, sides of foundations etc. in layers not exceeding 20 cm in depth, consolidating each deposited layer by ramming and watering from CSL premises and compactor and ramming by plate compactor. Rate is inclusive of cost and conveyance of machineries, labour, material, tools and tackles, others incidentals etc complete. 18 Supplying, spreading, filling and compacting quarried earth (excluding rock) in layers not exceeding 20cm thick, watering, consolidating each deposited layer by compacting using plate compactor and watering. Rate is inclusive of cost and conveyance of machineries, labour, material, tools and tackles, transporation, others incidentals etc.complete. 19 Supplying and providing Solid block masonry using pre-cast solid blocks ( Factory made) of size 30x20x15cmfor super structure in CM 1:4 (1 cement : 4 coarse sand) including cost of all materials, labour, transportation, loading, unloading, curing and scaffolding etc complete. 20 Supplying and providing Solid block masonry using pre-cast solid blocks ( Factory made) 30x20x10cm in CM 1:4 (1 cement : 4 coarse sand) includingcost of all materials, labour, transportation, loading, unloading, curing and scaffolding etc complete. 21 Providing and laying Autoclaved Aerated concrete (AAC) blocks masonry 100 mm/ 125 mm thick with Grade- I AAC blocksfor super structure above plinth levelin cement mortar 1:4 (1 cement : 4 coarse sand) with RCC band of 10cm at sill level and lintel level. The rate includes supplying and providing in position 2 Nos 6 mm dia M.S. bars for RCC work. Rate is inclusive of cost of all materials, labour, transportation, loading, unloading, curing and scaffolding etc complete. 22 Plastering with cement mortar 1:4(1 cement : 4 Msand), 12 mm thick,for externaland internal walls of structure including cost of all materials, curing, labour, transportation, loading, unloading and scaffolding etc complete 23 Plastering with cement mortar 1:3 (1 cement : 3 Msand), 6mm thick, for ceiling plasteringincluding cost of all materials, curing, labour, transportation, loading,unloading and scaffolding etc complete. 24 Finishing walls withtwo or more coat of Acrylic Smooth exterior emulsion paint ofapproved brand to get required colour shade on new work including priming coat ofexterior primer applied, including cost and conveyance of all materials, labour,scaffolding, and other incidentials etc complete.(Make ofPaint: Apex ultima protek or equivalent product of Berger/Nerolac) 25 Finishing walls with two or more coat of Acrylic Smooth interior emuslion paint of approved brand to get required colour shade on new workincluding priming coat of interior primer applied, cost and conveyance of all materials, labour, other incidentials etc, complete. (Make ofPaint: Apex ultima protek or equivalent product of Berger/Nerolac) 26 Supplying, providing and laying matt finished vitrified floor tiles 600x600mm size(thickness to be specified by the manufacturer) of approved make, in all colours and shades and 600 x 100 mm skirting laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqm providing 3 mm epoxy grouted joints with matching pigments and finishing the work complete in all respect. (Basic Rate of tile = ₹900/Sqm excluding GST) 27 Supplying, providing and laying Antiskid tiles 120 x 60cmsize on the deck slab and steps (thickness to be specified by the manufacturer)of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3kg/sqmproviding 3 mm epoxy grouted joints with matching pigments and finishing the work complete. (Basic rate of tile = ₹1291/sqm excluding GST) 28 Supplying and laying anti-skid/non slippery ceramic floor tiles for showers /toilets of best quality and colour and shade of size 300x300mm(thickness to be specified by the manufacturer) of 1st quality and approved make laid on 20mm thick bed of cement mortar 1:4 (1 cement : 4 coarse sand), filling with grey cement slurry @3.3Kg/sq.m including grouting the joints of flooring tiles having joint of 3mm width, using epoxy grout mix of desired shade including cost and conveyance of all materials, cement, epoxy grout,curing, labour, transportation,loading and unloading, other incidentials etc. complete. (Basic rates = ₹700/sqm excluding GST ) 29 Providing and laying vitrified Toiletwall tiles, of approved make, in all colours and shades, laid on 20mm thick cement mortar 1:4 (1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/ Sqm including epoxy with 3mm spacer and grouting the including skirtingjoints with white cement and matching pigments etc, including cost ofall materials, curing, labour, transportation, loading and unloading etc. complete.(Basic rates = ₹600/sqm excluding GST) (Size 45 x 30 cm) 30 Providing and laying swimming pooltilesin different sizes, of approved make, in all colours and shades, Piccolo Tiles size 10 x 10 cm Model Silk, 126 S1 100% or as approved by CSL. Tile Laying including Adhesive and Epoxy filling joints with water proffing. Make: MYK LATICRETE/ROFF including all materials and labour charges etc including cost ofall materials, curing, labour, transportation, loading and unloading etc. complete. (Basic rates = ₹1070/sqm excluding GST) (Size 10 x 10 cm) 31 Supplying, providing and fixing FRP doors with frame work and accessories such as 100mm SS hinges, 100mm SS tower bolt, 100mm SS aldrop, and SS handle, 60mm and 20mm SS screw, 20mm wood screw, 30mm PVC grip including cost and conveyance of all the materials, labour charges, necessary fixtures, and all other incidentals etc. complete. 32 Providing and fixing Aluminium openable ventilatorusing powder coated Aluminium frames of approved quality and shade using 63.5x 38.1x 2mm size and shutter frame50x20x1.5mm or nearest available sections aluminium Sections & 4mm thk. Plain glass, EPDM beading, locking arrangements including cost and conveyance of materials, labour, fixtures, all other incidentals etc. complete. 33 Supplying and fixing in position fully glazed Aluminium Windows sliding type using window frames and shutter frames of conventional size powder coated Aluminium section of appropriate quality and colour, frames 63.5x38.1x1.5mm and 38x20x1.5mm thick or nearest available sizes and shutter panels with clear float glass having thickness not less than 5mm including cost and conveyance of all materials, all fixtures, clips, fittings, putty, locking arrangements, all labour, other incidentals etc. complete. 34 Supply, fabrication and errection in positionwith MS material of angles, flats, solid rods, base plate works etc by straightening, cutting & welding, for various worksas per drawing or as instructed, erecting in position to line and level by welding/bolting embedding in concrete and applying a priming coat of approved steel primer and two coats of synthetic enamel paint including hire charges for tools and plants, material & labour, cost of electrodes, other incidentals etc.complete. 35 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc, including welding, grinding, buffing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners, stainless steel bolts etc, of required size, on the top of the deck floor, stairs and the side of pool deck with suitable arrangement as directed, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.) complete in all respect. 36 Supplying and fixing roofing with 0.46mm thickness coloured aluminum powder coated roofing sheet trafford type from reputed manufacturers and fixing using approved size self tapping, self drilling carbon steel screws with EPDM sealing washers to be fixed on every alternate crest ofsheets and overlaps of sheets with minimum end overlaps of 150mm and stitch screws of approved size on side overlaps including cost and conveyance of all materials, labour for all leads and lifts, other incidentals etc. complete. (Only Finished area only will be measured for payment.) 37 Providing and fixing in position aluminium ridge cover of 0.46mm thick and 1200mm wide from reputed manufacturers with minimum end overlaps of 450mm, and fixing with self tapping & self drilling screws with EPDM sealing washersincluding cost and conveyance of all materials, labour, all leads and lifts, other incidentals etc. complete. (Only Finished area only will be measured for payment.) 38 Supplying and fixing 150 mm Square type UPVC gutter with spouts at the eve of roof for collecting rain water including supply and fabrication of M.S clamps for holding gutter, painting the clamp with 2 coats of enamel paint over one coat of zinc chromate primer of approved brands, fixing to line and level, glue for gutter for connecting with leakproof including cost and conveyance of all materials, labour etc. complete. (Structural steel works for clamps shall be measured under respective item.) 39 Supplying and erecting in position PVC down water pipes 110mm dia (Hycount or Finolex or Supreme) including all specials such as bends, elbows, reducers, end cap, etc. and will be measured with pipe length for all heights to correct line and level, fixing the pipe by means of MS brackets by bolting or welding wherever required including cost and conveyance of all materials, all accessories, MS brackets in structural steel, labour etc. complete. (structural steel works for clamps shall be measured separately.) 40 Providing and fixing 600 x 450mm bevelled edge mirror of superior glass (of approved quality) completewith stainless steel screws and washers complete.(Base rate Rs 1298/- each excluding GST) 41 Providing Rubber Mat(Duro wipe) of approved quality having rectangular/oval shaped. 42 Swimming Pool Concealed Water proofing (AC 40) (Providing water proofing treatment on the Swimming Pool internal/external RCC Slab area by cleaning loose particles, covering the wall-floor joint with polymer modified mortar, application MYK Arment/SmartCare/Sika®/UniShield® make two component elastomeric acrylic reinforced cementitious, waterproofing coating (two coats) by brush including cost of all labour, materials etc complete. Waterproofing shall be carried out by manufacturer or its authorised applicator having warranty of atleast 10 years. 43 Supplying and fixing Signages(S S mat finish engraved name boards)of size10cm x 25cm. 44 Construction of granular sub-base by providing close graded material, carriage of mixed material by tippers to work site, for all leads & lifts, spreading in uniform layers of specified thickness,compacting manually/mechanically to achieve the desired density, complete. 45 Providing and laying 60mm thick factory made cement concrete interlocking paver block of M -30 grade made by block making machine with strong vibratory compaction, of approved size, design & shape, laid in required colour and pattern over and including 50mm thick compacted bed of coarse sand, filling the joints with line sand etc. all complete. Rate is inclusive of clearing & levelling the site, aggregate laying over polythene/PVC sheet with an overlap of 15cm in joints longitudinally & transversely. 46 Conducting water tightness test of swimming pool by arranging and filling the pool with water after cleaning of all debris and before water proofing the structure as per relavanrt IS code including cost & coveyance of water, labour, monitoring, etc. complete in all aspect. 47 PART B- PLUMBING WORKS SANITARY SYSTEMS:-Sanitary Supply & Installations: Providing and fixing white vitreous china pedestal type water closet dimension not less than 520*360*390 mm (European type W.C. pan) (S or P type) ISI marked (Basic rate=Rs.3050/- excluding GST) white solid plasticseat and lid cover, 10 litre wall mounting white PVC flushing cistern (Base rate = Rs.1540/- excluding GST), including flush pipe, with manually controlled device (handle lever), conforming to IS, CP connector tube with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required. 48 Providing and fixing in position approved quality white glazed vitreous china flat back wash basin size not less than 450X350X195 mm with CI brackets, 15mm brass CP pillar cock, 15mm PVC connection and 32mm brass waste of standard pattern, PVC waste pipe etc. including painting of fittings & brackets, cutting & making good the walls wherever required. All PVC items are to be heavy duty type. 49 Supplying and fixing Acrylonitrile Butadiene Styrene (ABS) body health faucet withwall hook with angle cock and 1 metre SS braided flexible connection pipeincluding cost and conveyance, all labour for fixing, all incidental charges etc. complete. . 50 Providing and fixing in position approved quality white ceramic wall mounting urinal size not less than 375x390x590mm(Base price=Rs6390/-) having a 15mm PVC connection, 32mm or nearest dia PVC waste connection, CP brass waste coupling and 1No CP spreader connected to waterline and 15mm brass push cock, cutting and making good the walls and floors, including cost and conveyance of all materials, screws, plugs, labour, other incidentals, etc. complete. All PVC items are to be heavy duty type. 51 Providing and fixing in position good quality HPL board urinal partition including cost and conveyance of all materials, brackets, screws, plugs, labour, other incidentals, etc. complete. 52 Providing and fixing CP Soap Dish Holder having length of 138 mm, breadth 102 mm, height of 75 mm with concealed fittings arrangements. 53 Providing and fixing CP towel rail600 mm withCP brass screws and accessories with concealed fittings arrangement of approved quality 54 Providing and fixing Robe hook points of approved quality(Base rate =Rs 350/-excluding GST) 55 Providing and fixing C.P. brass shower 100mm dia with 200mm long shower arm and wall flange (Base rate = Rs.1420/- excl. GST) with 15 or 20mm inlet along with CP brass shower valve 56 Providing and fixing brass bib cock of approved quality 15 mm nominal bore including flanges 57 Providing and fixing C.P. brass angle valve of approved make of 15mm nominal bore 58 Providing and fixing PVC pipes, fittings including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step PVC solvent cement and testing of joints complete-50 mm dia 6 Kgf/cm2 - External work - Exposed on wall. 59 Providing and fixing PVC pipes including fixing the pipe with clamps/clips at 1.00 m spacing.This includes jointing of pipes with one step PVC solvent cement and testing of joints complete-63 mm dia 4 Kgf/cm2- External work - exposed on wall. 60 Providing and fixing PVC pipes (75 mm dia 6 Kfg/cm2) including fixing the pipe with clamps/Clips at 1.00 m spacing. This included jointing of pipes with one step PVC solvent cement and testing of joints complete. 61 Providing and fixing PVC pipes (110 m dia 10Kgf/cm2 - External work) including fixing the pipe with clamps/clips at 1.00 m spacing. This includes jointing of pipes with one step PVC solvent cement and testing of joints, providing necessary PVC puddle flanges embedded in RCC wall etc. complete. 62 Supplying and fixing PVC multi floor traps with 110mm dia including cost and conveyance of all materials, labour, other incidentals etc. complete. 63 Supplying, Fixing, Testing and commissioning at site in position 150x150mm square C.P cast brass or stainless steel anti cockroach grating cover SS (304)of matching size of UPVC fabricated floor trap / multi inlet trap complete in all respects. 64 Providing, Fixing, testing and commissioning at site in position Floor clean outwith Stainless Steel Square frames SS (304), Rubber Seal and flat round cover with screw. complete in all respects.110 MM DIA. 65 Supplying,Fixing, testing at site in position 160mm dia square/circular grating Terrace rain water outlet (Cast Iron)(for 110mm dia pipe). 66 WATER SUPPLY (INTERNAL AND EXTERNAL)Supplying, Fixing, Testing and commissioning at siteUPVC pipes (as per ASTM D- 1785 sch-40 ) of approved make suitable for solvent welded joints including all necessary fitings like tee, elbow, adaptors, split clamp etc, chasing and making good the walls whatever required providing necessary brass ended terminal fittings testing the entire pipe work for a pressure not less than 5kg/cm2 to the satisfaction of project engineer (Inernal Cold water supply) 67 a. ¾ (20mm) dia. (Internal / Concealed) Cold water supply 68 b. 1 (25mm) dia. (Exposed on wall /ceiling) Cold water supply 69 c. 1 ¼ (32mm) dia. (Exposed on wall /ceiling) Cold water supply 70 Supplying, Fixing, testing and commissioning at site in ¾ (20mm) dia positions Automatic Air Release Valves ,approved quality and make on the top of the vertical water supply pipes as per specification and drawings. 71 Supplying, Fixing at site in position full way lever operated forged brass ball valveof brass body with forged brass hard crome plate (PN 10) of approved make with necessary MTA fittings in position as per drawings 72 a.18.18.2 1” (25mm)dia 73 b. 1 ¼ “ (32mm) dia. 74 Supplying,Fixing, testing and commissioning at site GI Slotted Rail Brackets , hangers, supports with necessary drilling holes to suit the insertion of pipe clamps, de burring etc., as per detailed drawing for supporting soil, waste & rain waterpipes & water supply pipes in shaft and ceiling with suitable GI clamps, bolts, threaded rods, anchor bolts nuts & washers fixed on shaft walls/outer walls etc. complete. Electro Galvanized (In shaft, Ceiling and dry interior areas) 75 Excavation and refilling trenches after taking out the pipes manually / by mechanical means and stacking the pipes within 50 metres lead. Pipes Upto 150 mm diameter 76 Providing and fixing PVC pipes (150 mm dia 6Kgf/cm2) includings jointing of pipes with one step PVC solvent cement ,trenching, refilling & testing of joints complete. 77 Constructing Gully Trap Chamber300X300 mm internal size including 100mm thick 1:4:8 PCC base,115mm thick brick masonry in CM 1:5, plastering internally and externally with CM 1:3 , 12mm thick and providing 110mm dia PVC Square Gully Trap. 78 Constructing brick masonry Manhole / Inspection chambers with bricks of class 75in cement mortar 1:5 including plastering inside and outside with cement mortar 1:3, 12mm thick (1cement : 3 coarse sand) inside with a floating coat of neat cement 12mm thick and making channels in cement concrete 1:2:4 etc. complete) Internal size 600X600mm depth not exceeding 900mm 79 Supplying and fixing Ductile Iron (Hinged Type) cover andframe. (As per EN – 124 standard) 80 a. Manhole cover For Gully trap 300X300mmsize 8 kg wt 81 b. For Inspection chamber 600X600mmsize 58 kg wt. -C-250(HD) 82 c. For Inspection chamber 450X450mmsize 58 kg wt. -C-250(HD) 83 Drilling with Core Cutting machine in RCC beams,slabs floors etc., for laying pipes and rendering the same in RCC 1:2:4,finishing the same to the satisfaction of the Owner or his authorized representative etc., including nominal reinforcement wherever required, complete. The quoted rate shall also include for providing (conbextra GP -2/GP – 0) based water proofing compound for sealing the joints around the pipes.(Slab Thickness – 10cm / 12cm) 84 a. RCC beams50 mm dia 85 b. RCC beams75 mm dia 86 c. RCC beams110mm dia 87 PART C-POOL EQUIPMENTS 900 mm FRP Bobbin Wound , high rate Sand Filter,with UV resistant surface finish, Dia :900mm, Max Operating pressure 2.5 kg/cm2 Max.Flow of 31.20 m3/hr, 2.0outlet connection. Side Mounted MPV,complete with pressuregauge, manual bleeder, water drain, empty drainfor filter media.Make -Pentair / Emaux/Equivalent 88 Silex Sand (Filter Media 0.4 - 0.8 mm). 50kg/bag. 89 RE-CIRCULATION PUMP : 3 H.P. / 2.2 KW, Single phase Horizontal closed coupled, Centrifugal Pump,with Mechanical Seal in Stainless Steel AISI 304 shaft, Designed for pumping Pool Water being disinfected by chlorine. with motor of 2900 RPM, with attached stainer basketwith easily movable lid. Make:Lubi / Kirloskar/Espa 90 Eye Ball Inlet 2 for Concrete Pool Make -Pentair / Emaux/Equivalent 91 Suction Fitting 2 for Concrete PoolMake -Pentair / Emaux/Equivalent 92 Main Drain cover ABS 300x300mm Square Drain Make -Pentair / Emaux/Equivalent 93 Skimmer Box White ABS PlasticsMake -Aqua / Emaux/Equivalent 94 Under water light LED Warm white14.4 w, 12 volts with 3 m cablewith driver Make -Dazzle/Equivalent 95 Deck Box in White ABSMake -Aqua / Emaux/Equivalent 96 Protection box for LED Drivers 97 Chemical Dosing Pump of for Chlorine. 10ltrs/hr Make: Aquafine Make in India/ Procopi/ Astral 98 Storage tank for Dosing Pumps 200 ltrs. For Chlorine Only Make: Aquafine Make in India/ Procopi/ Astral 99 Control panel with necessary controls, cabling and power switches as required for pumps and U/W Lights. Make - Schneider / L&T 100 Vaccum head with 4 wheels ,Aluminium body ,plastic handle(34.5*13cm).Make -Pentair / Emaux/Equivalent 101 Floating suction ,made of polyethyene blue color 40 mm(1-1/2) 15 mtrs longMake -Aqua /Certikin/Equivalent 102 Telescopic Handle 2.4-4.8 mtrs longMake -Pentair / Emaux/Equivalent 103 Leaf net with Clip (Deep bag) MAKE -Pentair / Emaux/Equivalent 104 Leafskimmer Make -Pentair / Emaux/Equivalent 105 Curved brush clip typeMake -Pentair / Emaux/Equivalent 106 Test kit for chlorine & pH Make -Pentair / Emaux/Equivalent 107 63mm PVC Double Union Valve. Make - VDL/ Cepex (for filtration ) 108 63mm PVC 3 piece Union adaptor. Make - VDL/Cepex 109 Supply, Installation, Technical supervision, Transportation etc. 110 TESTING AND COMMISSIONING:-Testing and commissioning of all Equipment supplied and installed and water balancing with Proper levels of pH and Chlorine. Including startup chemicals. 111 The necessary pipes, fittings, cables, conduits, Brackets, Supports and other accessories for installation etc.Make:Aizer/ Supreme / Astral.& Finolex / RR Kabel / Eqlnt 112 Standard model stainless steel AISI-304 ladders, width: 500mm, handrails dia 42mm stainless steel non-slip steps, supplied with anchoring fixtures. No. of steps - 5 .Make -Aqua / Emaux/Equivalent 113 PART D - ELECTRICAL WORKSPANELS Distribution Board/ RCCB/ ISOLATOR/MCBsDB 114 a. Supplying and fixing of following ways surface/ recess mounting, vertical type, 415 volts, TPN MCB distribution board of sheet steel, dust protected, duly powder painted, inclusive of 200 amps tinned copper bus bar, common neutral link, earth bar, din bar for mounting MCBs (but without MCBs and incomer ) as required . (Note : Vertical type MCB TPDB is normally used where 3 phase outlets are required.) 4 Way (4+ 12)DB,Double Door 115 b. Supplying and fixing 5 amps to 32 amps rating, 240/415 volts, C curve, miniature circuit breaker suitable for inductive load of following poles in the existing MCB DB complete with connections, testing and commissioning etc. as required.Single pole 116 c. Supplying and fixing following rating, four pole, (three phase and neutral), 415 volts,FP, 40A, MCB,complete with connections, testing and commissioning etc. as required. 40A, FP, MCB 117 d. Supplying and fixing following rating, Four pole, (three phase and neutral), 415 volts, 30mA, RCCB, in the MCB DB complete with connections, testing and commissioning etc. as required. 118 e. Supplying and fixing single pole blanking plate in the existing MCB DB complete etc. as required. 119 CABLES Supply , laying, testing and commissioning of the following PVC insulated ArmouredAluminium L.T. Cables(AYWY/AYFY)/(XLPE) H.T trenches, cable trays, hume pipes, including supply and fixing of painted MS clamps, spacing of the clamps not exceeding 60cms, nuts and bolts, screws, identification tags, route markers etc. required for clamping intervals as necessry. 120 a. SUPPLY OF M.V.ALUMINIUM CABLES Supply of the following PVC Insulated Armoured Aluminium M.V.Cables XLPE 1 x 4C x 10 Sq.mm. 121 b. MV CABLE LAYING Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size direct in ground including excavation, sand cushioning, protective covering and refilling the trench etc as required. Upto 35 sq. mm 122 c. Laying of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size in the existing RCC/ HUME/ METAL pipe as required.Upto 35 sq. mm 123 d. Laying and fixing of one number PVC insulated and PVC sheathed / XLPE power cable of 1.1 KV grade of following size on cable tray as required.Upto 35 sq. mm (clamped with 1mm thick saddle) 124 TERMINATION Supply of all materials and termination of the following FR PVC insulated flexible copper cable using single compression type cadmium plated brass cable glands, Copper crimped type cable lugs, cable identification tags and including gland earthing using copper conductor of adequate size , AL-CU strip for termination of Cables etc. 1 x 4C x 10 Sq.mm. 125 FAN /Exhaust Fan 126 Supplyof light duty exhaust fan in plastic body with self opening louvers working on 230V single phase A/C in the existing opening, including making good the damage, connection, testing, commissioning etc. as required.(150MM) 127 Extra for fixing the louvers/ shutters complete with frame for a exhaust fan of all sizes 128 Installation of Exhaust fan in the existing opening making good the damage, connection, testing commissioning etc as required upto 450 mm sweep. 129 WIRING in PVC Conduit.Supply, installation and testing of wiring points according to IS 732 -1989 in pvc conduit using 1.5sq.mm FRinsulated stranded single core copper wire 650/1100V grade conforming to IS 694 part 1 1964 with 2.03mm. continuous copper earth wire, earth socket crimped to the earth wire, brass bolt and nut etc complete suitable size modular type flush mounting metal swith boxes , modular type front plate, clip-in modular type 6A switches, 6A 3plate ceiling rose and making good surface of the wall.Copper wire of the specification and of size 1.5sq. mm. should be used in 2 run as circuit mains to switch board. All the termination in the switches and DBs shall be tinned and the wire shall be colour coded as per IS.(wiring should include lead wire also. No separate payment for lead wires.) 130 Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm PVC conduit, with modular switch, modular plate, suitable GI box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. 131 a. 2 No.light points controlled by 1 No 6A SP switch 132 b. 4 No.light points controlled by 1 No 6A switch 133 c. 7 No.light points controlled by 1 No 6A switch 134 d. 8 No.light points controlled by 1 No 6A switch 135 e. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 3 pin 5/6 amps modular socket outlet and 5/6 amps modular switch, connection etc. as required. 136 f. Supplying and fixing suitable size GI box with modular plate and cover in front on surface or in recess, including providing and fixing 6 pin 5/6 & 15/16 amps modular socket outlet and 15/16 amps modular switch, connection etc. as required. 137 f. Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor, single core cable in surface/ recessed PVC conduit as required 138 a. 2 X 1.5 sq. mm + 1 X 1.5 sq. mm earth wire 139 b. 2 X 2.5 sq. mm + 1 X 2.5 sq. mm earth wire 140 E A R T H I N G 141 Providing and fixing of maintenance free Earthing system comprises of molecularly bonded copper of 99.9% purity on low carbon steel of min 3048mm length (10 feet), having a diameter of 20mm with copper bonding thickness of 250 microns as per UL 467.The Rod has to be either continuous or with self-coupling peg & bore arrangement with fault current withstand capability of 30 KA rms value for 1 second and I peak of 76 KA. The rod must be having corrosion test, peel off test for uniform coating, 180 degree bend test with out peeloff of copper bonding. Exothermic welded Clamp for clamping as suggested as per NBC 2016. Ordinary Stainless steel/Copper alloy universal clamps are not recommended. For self coupling peg & bore arrangement rod needs Impact point on the bottom rod for easy insertion. Earth enhancing mineral compound is used for improving the soil conductivity. The material shall be mineral inert to sub soil and shall not pollute the environment and non corrosive to earth rod. The material should have a resistivity less than 0.2 Ωm. It should be free from hazardous substances. The mineral compound is required to have minimum 17.5 Kg of the total composite. The compound should be chemically inert and needs to submit Govt approved Indian labs test certificate. Concrete Earth electrode inspection chamber with weight bearing capacity of 50KN. The dimension shall be 320mmx 320mmx 190mm. Govt approved Indian labs test certificate required. Make: Cape / Erico / Furse 142 Providing and fixing all type of copper strip(all sizes) on surface or in recess for connections etc. as required. 143 Providing and fixing all type of copper wire (0 to 14swg) on surface or in recess for connections etc. as required. 144 LIGHTINGFIXTURES 145 Supply, instalation, testing and commissioning of wall mounting type1x20 W LEDluminare complete with necessary accessories and connections as required. 146 Supply, instalation, testing and commissioning of recess mounted 8W Mirror Light 147 Supply, instalation, testing and commissioning of of recess mounted 7WLED down light fixture of extruded aluminium housing with phospher technology with all accesssories including, wiring , terminations etc. complete (LUCKER LCOB07N or equivalent (Architect approved make .) 148 Supply,instalation, testing and commissioning of of 1x15 WBollard Light 149 Supply,instalation, testing and commissioning of 2 X25 W Pole Light 150 MISCELLANEOUSITEMS DOCUMENTS APPROVAL 151 Preparationof necessarydocuments,forms, drawings, schemes, certificates,etc. and getting approval from statutory authorities forthe enrgisation.Safety certificate and energisation order should be obtained from the Central Electricity Authority(CEA). All expenses except statutory charges shall be paid by the contractor and make necessary documents and getting connection from CEA 152 PART E - OPERATION & MAINTENANCE 153 Engaging experienced personnel for daily operations and routine maintenance of pool for a period of 12 months. The rate is inclusive of cost for all materials, consumables, conveyance charges, hire charges of tools, labour charges etc. for periodic maintenance and replacement of all spares etc(Note:The work includes vaccum cleaning of pool bottom, cleaning of pool walls, cleaning of filter and pre-filter of the pump,backwashing, checking the water quality, cleaning of water quality areound the pool, monitoring of electromechanical system etc. but not limited to the above. Maintenance works shall be carried out at required frequency in consultation with CSL)
