Tender For Improvement Of Part At Andal Puram; 1 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil,wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blastinginclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete - Narrow Foundations - Upto 2.00m Depth 2 Plain Cement Concrete 1:4:8 (one part of cement, four part of Crushed Stone Sand (M- Sand) and eight part of coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour charges and all incidential charges such as water providing etc., complete as per standard specification 3 Plain Cement Concrete 1:2:4 (one cement, two Crushed Stone Sand (M- Sand) and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification 4 Supplying and erecting centering for vertical plain/ RCC concrete walls of supply channel, retaining wall etc upto 90Cm height with necessary supports,all cross bracing with mild steel size of 90cm x60 cm and gauge BG 10 stiffened with welded mild steel sheet angles of size 25 mm x25 mm x3mm for bearing laid silver Oak/ Country wood joist of size 7.50 cm x5.0 cm spaced @ about 90 cm C/C and supported by Casurina props of 10 cm to 13 cm spaced @ 75 cm C/C etc,, complete complaying withstandered specfications and as directed by the departmental officers 5 Shuttering 6 Column 7 Providing and laying in position Standardised Concrete Mix M-20 Grade in accordance with IS 456 - 2000 using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement contenet of 325Kg/ cum and maximum water cement ratio of 0.55 including admixture (Plasticiser / super plasticiser) in recommended proportions as per IS 9103 to accelerate, related setting of concrete, improve workability without imparing strength and durability with about (5.0cum), 7730Kg of 20mm machine crushed stone jelly and with about (3.3 cum), 5156kg of 10 - 12mm machine crushed stone jelly and with about (4.79cum) 7670 kg of sand, but excluding cost of reinforcement grill and fabricating charges centering and shuttering but including laying, vibrating with mechanical vibrators, finishing, curing, etc and providing fixtures like fan clamps in the RCC floor / roof slabs wherever necessary without claiming extra cost etc., complete complying with standard specification and as directed by the departmental officers - The Coarse and Fine aggregates to be used should comply with the requirements of IS standards. (No separate payment will be made by the Department for the excess usage of materials) -Upto Basement 8 Suppling and fabricating and placing in position MS(or) R.T.S. bar for reinforcement to all RCC works as per the design given including cost ofsteel and binding wire also in all floors. 9 Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. 10 Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of63mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, sand cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. 11 Supplying and filling in foundation, basement, etc with Stone Dust in layers of not more than 15 cm thick well watered, rammed and consolidated etc. complete complying with standard specification and as directed by the departmental officers. 12 Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. 13 Supplying, fabricating, erecting structural steel work for roofing welded or bolted type using MS channels, angles, plates and round bars etc. conforming to IS specification including primer coating and enamal painting as per Design given by the departmental officers etc, complete as per standard specification 14 Brick work in CM 1:5 (one cement & Five Crushed Stone Sand (M- Sand)) using II class ground moulded bricks of size 9 X 43/8X 2 3/4 including finishing, curing, etc., complete complying with standard specification - 100CFT 15 Plastering with cement mortar 1:5 (One part of Cement and Five part of Plastering Sand (P- Sand)) 12mm, thick in all floors including cost and conveyance of all materilas to site and labour charges etc,complete as per standard specifications 16 Providing Two Seater arrangements with Ready made Granite benches 20mm thick Slab with 1500mm wide , 600mm height. The cost shall include all labour and materials and as directed by the departmental officers. 17 Supply and Fixing of Double Swing -2.40 m height with 40mm dia MS pipe Support as legs & Top bar is 50mm dia. The Seat is 9mm tk Reinforced rubber with antiskid chequred top with heavy ball bearing & 7mm Dia Suspension, Electro galavanised chain & the Cost shall inclusive of all materials, labours and Fixing Etc., Completed by the Departmental officers 18 Supplying and fixing of Seesaw 4 Seater FRP Seat to a height of 0.50m with 80mm dia leaver and 40mm top bar with MS pipes. The seater is of Moulded Plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and Fixing etc complete as directed by the departmental officers 19 FRP Slide 6feet Supply of 6 Feet FRP slide is provided with FRP slide having the chute length ofnearly 12Ft and the centre support pipes height above the ground level is 6Ft 25mm, 38mm & 32mm MS Pipes pipes are used. Painting is executed by latest Technology of 7 tank process and electrostatic applied Pure polyester Powder coating(for outdoor) in attractive colours and no sharp edges. 20 Supplying and fixing of Merry Go Round 6 Seater (FRP Seat). The cost shall inclusive of all materials, labours and Fixing etc complete as directed by the departmental officers 21 b)Collection,supply,erection and fixing of Air walker eequipped with Vertical postof 2nos(CR circular pipe of 3mm thick) of size 4x4x4 height above floor level.Hanle made of 1.5 inches dia Ms pipe(3mm Thick) fixed with vertical post on top.Foot rest 2 nos fixed in 1.5 inches dia circular pipe 3mm thick at a height of 8 from floor level with necessary provisions for bearing.All materials used are of heavy duty.double coated with PU Painting,heavy duty,branded sealed ball bearing for long lasting life etc.,complete, cost including al costs and conveyance of all materials to site,labour charges and all other costs etc.,complete as directed by the departmental officers. 22 Supply and fixing of 65 mm dia G I pipe (Class B) of 4 Mts. Length with 300 mm x 300 mm X 6 mm MS base plate duly welded at the bottom and with concreting and construction on Masonary pedestal with MS box of 30cmx20cmx 10cm with angle iron frame work with door with lock and key arrangements and with supply and fixing of post top latern fitting of (Integral type) with Cu. Choke and condensor and necessary accessories with complete set (Philips/ Crompton Greaves / Equivalent Make) with spherical / ribbed / conical acrylic cover suitable for 20W LED lamp with supply and fixing of 1 No. 20W LED lamp and with supply and fixing of 16A fuse units, (500V), 5A SP switch inside the MS box and painting with suitable colour SD 99 23 Earthing as per the ISI specification with an earth electrode of 2.1mt class B GI pipe of dia not less than 40mm, with copper earth plate of size 125mm x 50mm x 6mm, with necessary funneling arrangements with necessary masonry work and with 38mm RCC cover slab for the brick masonry . SD 212 24 Supply and Laying of 4 x 16 sq.mm. PVC armoured LTUG cable in suitable size HDPE pipe in a trench to be excavated at a depth of 0.75 metre and refilling the earth to make good.SD 658 25 Supply and Run of 2 of 6 sq.mm. PVC insulated SC unsheathed FRLS copper conductor of 1100 V grade in suitable gauge MS conduit pipe concealed in wall and ceiling with continuous earth wire connection of 6 sq mm copper wire with painting of suitable colour. SD 325 26 Supply and fixing of 16A DP switch of 500V with metal clad with fuse and neutral (side handle) on suitable TW board with earth connection only etc, complete PWD 173 27 Planting of Tabernum dwarf foliage shrub(nanthiyavattai) variety of height 30-45 cm in polythene bag of dia 20 cm including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in-charge. TWAD 282 28 Supplying and Planting of Bougainvillea hybrid foliage shrub variety sapling of height 30-45 cm in polythene bag of dia 20cm, including loadingand unloading charges,transportation, stacking of saplings at site, earth work excavation of required size, planting ofsapling, refilling of excavated earth etc as directed by the site in-charge.TWAD 272 29 Planting of Nerium oleander foliage shrub variety of height 30-45 cm in polythene bag of size 6x7 inch including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site in- charge.TWAD 280 30 Supplying and Planting of Hibiscus tilliaceus treesapling of height 240 – 300 cm in polythene bag of size 20x21 inch including supporting stack of 5 cm dia casurina pole of 10 feet height, including loading and unloading charges, transportation, stacking of saplings at site, earth work excavation of required size, planting of sapling, refilling of excavated earth etc as directed by the site incharge.TWAD 303 31 Providing various designs of Animal Dust bins made of 3 layer fiber structure with multi colour powder coating. The height of the dist bins 4 feet available models are penguin, Rabbit, Fish and monkey
