Tender For Improvement Of Babu Nagar Municipal Park S.F No: 76/1A53,A15 In Jolarpet Municipality; 1 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil,wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blastinginclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete - Narrow Foundations - Upto 2.00m Depth 2 Supply and filling in foundation with Filling M-Sand in layer of 15cm thick well water rammed to consolidation including cost and conveyance of Sandto site incluidng labour charges etc., complete as per standard specification 3 Plain Cement Concrete 1:4:8 (one cement, four fine aggregates and eight coarse aggregates) using 40mm size ISS HBG metal including cost and conveyance of all materials to site and labour charges and all incidential charges such as water providing etc., complete as per standard specification 4 Supplying and erecting steel centering including necessary supports for plane surfaces for Reinforced Cement Concrete works such as column footings, column pedestals, plinth beams, grade beams, staircase steps, etc. which require only nominal strutting using mild steel sheets of size 90cm x 60cm and 10 BG stiffened with welded mild steel angles of size 25mm x 25mm x 3 mm for boarding, laid over silver oakjoists of size 10cm x 6.5cm spaced at about 75cm centre to centre or at suitable intervals etc. complete in all floors complying with standard specifcation - Plinth Beam 5 Column 6 Slab and beams 7 Providing and laying in position, Standardised Concrete Mix M-20 Grade in accordance with IS:456-2000, using 20mm and down graded hard broken granite stone jelly for all RCC items of works with minimum cement content of 325 kg/mᶾ and maximum water cement ratio of 0.55, including admixture (plasticiser / super plasticiser) in recommended proportions as per IS:9103 to accelerate, retard setting of concrete, improve workability without impairing strength and durability with about (5 cu.m.) 7730 kg. of 20mm machine crushed stone jelly and with about (3.3 cu.m.) 5156 kg. of 10-12mm machine crushed stone jelly and with about (4.79 cu.m.) 7670 kg. of sand, but excluding cost of reinforcement grill and fabricating charges, centering and shuttering and also including laying, vibrating with mechanical vibrators, finishing, curing, etc. and providing fixtures like fan clamps in the RCC floor/ roof slabs wherever necessary without claiming extra, etc., complete complying with standard specification and as directed by the departmental officers.The coarse and fine aggregates to be used should comply with the requirements of IS Standards. 8 SupplyingandFabrication of Steel and placing in position TMT rod Grills for RCC works as per design given including cost of steel and GI binding wire in Floors etc,. Complete complying with standard specification in force and as directed by department officials.-TNDSS NO. SS 86 & 86A V,VI, VII (S6) 7,3 9 Brick work in CM 1:5 (one cement & five sand) using Third class country brick kiln burnt Bricks of size 8 3/4X4 1/4X 2 3/4 including finishing, curing, etc., complete complying with standard specification - 100CFT 10 Plastering with CM 1:5(One part of cement & five parts of sand) mix for 12mm thick including cost and conveyance of all materialsto work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:56&57 11 Providing granolithic floor finish of the following thickness with plain cement concrete 1:2:4 (One Cement, Two sand and Four aggregate) using 10 to 12mm gauge hard broken stone jelly including laying, finishing and the top rubbed smooth with power trawl, thread lining, curing etc. complete complying with standard specification and as directed by the departmental officers. 12 Special Ceiling Plastering with CM 1:3 (One part of cement & three parts of sand)mix for 12mm thick including cost and conveyance of materials to work site and including all labour charges for mixing, laying, curing,finishing etc., complete as per standard specifications and as directed by departmental Engineers – TNBP No:30,56&57 13 Painting two coats for Interior surface with approved Interior Plastic Emulsion paint approved quality and colour over a priming coat, including thorough scrapping, clean removal of dirt, etc complete and including necessary plaster of paris, putty, wherever required etc, complete as per standard specification. 14 Painting two coats with Ready Mixed Enamel Paint over the new iron works of approved quality and colour without priming coatincluding the cost all materials etc.,complete, in all floors. 15 Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulatedunshealhed SC.Cu.conductor of1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessorieswith TW switch box with 5A F.T. switch inflush with wall, coveredwith hylum sheet of 3mm thick with painting of suitable colour for open PVClight/fan point(For Electronic regulator) (5 pointsper coil). 16 Supply and fixing of 20W LED Tube Light for T8 Fitting (Single Side) Fitting complete with electronic ballast with TW round blockson wall or ceiling with led tube with PVC unsheathed Copper leads from terminals to the fitting. M-1278 17 Weathering Course with Concrete Broken Brick (S.I.No.278) & ( P & D) Data 54.Jelly 20mm gauge in pure slaked lime (no sand to be added) over roof slab,the proportion of brick jelly to lime being 32 to 12.5 well beated with wooden beaters for giving required slope and thickness as directed by the departmental officers.etc., complete.-1 m 3 18 Supply and fixing of M.S Grills with Doors and Windows with one coat of Red oxide with Primer including all costs such as welding,grinding and fabrication charges, cost and conveyance of all materials to site etc,complete as per standard specification. 19 Paving the floor with design Antiskirt ceramic tiles (colour and shade as directed) of size 305 mm x 305mm x 6 mm in all floors over a base layer of cement mortar 1:3 (one cement and three sand ) 20mm thick laid in-situ and pointed with same coloured cement 20 Supplying and fixing in position Indian water closet of size 580 X 440mm, white glazed earthen ware of approved quality with P trap or S trap confirming to IS:2556 -Part XII with sand cushion and forming flooring alround the closet using 40mm broken brick jelly in lime concrete1:2:5 ( one part of lime, two parts of sand and five parts of brick jelly) 100mm thick and finishing the top to required slope and including giving necessary connection to cast iron soil pipes/ PVC pipes by dismandling brick masonry, reinforced cement concrete roof/floor slab and making good the disturbed portion to original condition without leakage etc., complete complying with standard specifications and as directed by the departmental officers. 21 Supplying and fixing in position white / colour glazed European Water Closet of best quality and approved make with 100 mm P or S trap connecting with CI pipe of 100mm dia / PVC pipe of 110mm dia, double flapped rigid PVC black seat and seat cover with CP brass hinges including cost of white cement, cement for packing, spun yarn, teak wood plugs, brass screws, etc., including supplying and fixing 10 litres capacity PVC / 12.5 litres capacity porcelin low level flushing tank with a pair of CI brackets, etc., complete with all fittings such as 15mm brass ball valve with polythene float with brass handle, union, coupling connected by means of 40mm white PVC flush hand using Indian adopter joint including all internal fittings 22 Supplying laying and jointing P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting , Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges 20mm dia PVC pipe 23 20mm PVC elbow 24 20mm PVC Union 25 20mm PVC Tee 26 tap 27 110mm dia pvc pipe 28 110mm PVC Elbow 29 110mm PVC Tee 30 Supplying and filling in foundation andbasement with Well Gravel in layers of not more than 15cm thick well rammed watered and compacted etc., complete complying with standard specification. 31 Supplying and laying in flooringwith fully polished Sinthetic Grey colour Granite stone of 20mm thick (average) of 4 X 2 in size laid over base layer of cementmortar 1:3 (one cement and three Plastering sand) - 20 mm thick and applying cement slurry &pointed with white cement and colour pigments to the colour of stones and polished neatly as directed by the deparmental officers 32 Fabricating supplying and fixing of pre painted galvanium colour sheets with the following specification. The materials should be of PPGI tile profile with a red colour or any other approved design 0.47 mm thick 24 guage having width 1050 mm. The sheet should be G.I.base pre painted hot dipped galvanized iron sheet and to be fixed with shelf tapping screws,plastic washer.The washer and screws to be fixed by using minute power machine drilled with out damaging the sheets paint coating to be regular modified polyster coat with zinc coating of Z 120 GSM paint thickness the finish should be terra cotta finish like malabar mangalore tiles finish optional matt finish. The sheet to be fixed with making suitable corrugated,cutting the sheet in to the required ssize and making ornamental designs as per the site condition and as directed by the departmental officers. 33 Earth work excavation for foundation in Hard stiff clay, stiff black cotton, hard red earth, shales murram, gravel, stoney earth and earth mixed with small size boulders SS.20B and Sand, silt or other loose soil,wet sand or silt not under water, light black cotton soil, sandy loam ordinary soil and to full depth as may be directed except in hardrock requiring blastinginclusive of shoring shuttering and baling out water and cleaning and levelling the site etc., complete - Open Earth Work Excavation 34 Supplying and erecting for shuttering, including necessary supports for plan surface in foundation and basement for RCC column footings, Plinth beams, Staircase steps, etc. Using mild steel sheets of size 90 cm X 60 cm and 10 gauge, stiffened withmild steel angle of size 25 mm X 25 mm X 3 mm for boarding, supported by silver oak joists of size 10 X 6.5 cm, spaced at about 90 cm centre to centre and supported by casuarinas props of 10 cm to 13 cm dia spaced at 75 cm centre to centre complete, complying with standard specifications and as directed. 35 Plain Cement Concrete 1:2:4 (one cement, two fine aggregates and four coarse aggregates) using 20mm size ISS HBG metal including cost and conveyance of all materials to site and including for the mixing, laying and labour chargesetc., complete as per standard specification 36 Providing and laying, spreading and compacting graded stone aggregate to Wet mix macadam (WMM) specification including premixing the material with water at OMC in mechanical mix plant carriage to mixed material by tipper to site laying in uniform layers with paver in sub base / base course on well prepared surface and compacting with vibratory roller to achive the desired density complete as per clasue 406 of MORTH specifications. 37 Supplying and laying Rubberised interlocking Paver blockM40 grade Providing and laying of83mmthick high strength type conforming IS 15658-2006 of rubberized interlocking paver lock in size of minimum compressive strength of 40N/mm2 in uniform shape of approved make to be laid in flurring bone pattern with sand cushion below the uniform shap of approvednon skitting surface in the top and the rate including levelling the base preparation ofpavers as sub base, sand cushion 150mm thick layingout of pavement cut the pieces to fix the edge vibring the pavers,sweeping tranporting loading unloading of laying paver block as per standard specification,. 38 Internal Water Supply - P.V.C. Pipes (6Kg/SqCm) Supplying laying and jointing of 32mm P.V.C pipes (6Kg/SqCm) of approved quality and best variety conforming to I.S.S & with I.S.I mark, of the following sizes including cutting, Fixing to PVC specials using Adhesive but excluding cost of such specials and fixing to wall with necessary teak - Wood Plugs,PVC Clamps and screws,making holes on the wall or drilling holes in roof and making good the dismantled portions to original condition with necessary brick work and plastering wherever necessary with necessaryscaffolding charges etc. as per standard specification. 39 Supply and delivery of PVC pipes 4KSC including cost and conveyance of all materils and labour charges etc. complete 40 Lowering PVC rigid pipes and specials to trench and laying to proper grade and alignment, jointing with PVC couplers with cement paste. 41 Supply and delivery of Following PVC special Materials Including all Labour Charges etc., complete75mm PVC Elbow 42 75mm PVC Tee 43 32mm PVC Elbow 44 32mm PVC Tee 45 20mm Tap 46 Refilling with excavation earth including consolidation all labour charges etc., complete.Instruction given by departmental officers 47 Supply and delivery of clear water vertical wet type submersible pump conforming to IS8034/2002 and as amended thereafter and BEE 3 Star Rated capable of discharging notedLPM against head of water column due to all causes. The pump shall be with stainless steelshaft and dynamically balanced bronze or Cast SS impeller, brass screws and CI FG 200 gradepump bowl/diffuser with ISI mark. The pump shall be directly coupled to a continuos ratedtwo pole suitable wet type vertical squirrel cage induction motor suitable for operation in ACsingle phase 230 V+/- 10 %,50 HZ +/-5 % 48 Supply and delivery of direct online starter confirming to IS13947, IEC60947-1 and as amendedthereafter with suitable KW rating for operation in AC/single Phase/50HZ(± 5%) and 230V(±10%) including Ammeter, Voltmeter, Thermal Overload relay, 16 Amps 2 pole MagneticContactor with under Voltage protection, Indication lamp, starting capacitor, running capacitorand On/Off Push button switches, 5 way connector, wiring with 1 sq. mm/1.5 sq. mm copperPVC insulated cable, powder coated vermin proof box including the capacitor (the cost ofcapacitor is to be taken separately). 49 Labour charges for the erection of submersible pumpset in borewell/openwell including fixing and jointing submersible cable with proper clamps upto the starter to required depth and also fixing of riser pipes to the required depth valves erection clamps, pressure gauges upto the exterior wall of pump room and erection of panel board consisting of TPICN switches starter, Voltmeter, Ammeter, three pilot (indicating) lamps capacitor single phasing preventor, water level guard and laying and jointing the cables and twin earthing as per IE rules etc., complete and testing the pumpset and trail run for 10 days. 50 Supply and delivery and fixing of HDPE tank as per IS 12701 / 1996 including loading, unloading, transportation and labour charges for fixing of the GI pipes and specials for pipe connection works including cutting, threading and fixing charges etc., 51 Supplying and fixing of Double Swing of height 2.40m height with 40mm diaM.S. pipes support as legs and top bar is 50mm dia.The seat is 9mm thick reinforced rubber with Antiskid chequred top with heavy ball bearing and the suspension is 7mm dia electro galvanized chain and the cost shall inclusive of all materials, labours and fixingetc, complete as directed by the departmental officers. 52 Supplying and fixing of Two seater SeeSaw for below 12 years old childrens to a height of 0.50m with 50mm dia leaver and 40mm top bar with M.S. Pipes. The seater is of moulded plastic with heavy duty bush bearing. The cost shall inclusive of all materials, labours and fixingetc, complete as directed by the departmental officers. 53 Supply ,Erection, and fixing of Seated leg press of Pipe using 4 GI pipe, 11/2 GI pipe,11/4 pipe B Class and 5204 Premium Bearing, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns. Fibre seats of raw materials Fiber Mat: EB 300, 450, 600 & Fibre Resin: GP Resin, ISO Gel coat, Top Coat, Pigment etc,including cost and conveyance of all materials and labour charges etc. 54 Supply ,Erection, and fixing of Airwalkerof Pipe using 2 GI pipe,21/2 GI pipe 11/2 GI pipe,11/4 pipe13/4B Class and 5204 Premium Bearing & 6202 NTN Bearing , poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc. 55 Supply ,Erection, and fixing of Shoulder Wheel of Pipe using 21/2 GI pipe,3/4(20mm)B Class and 6204 ZZBearing 1 * 3/8 GI Bolt, 3* 3/8 GI Bolt, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc. 56 Supply ,Erection, and fixing of Double Wheel of Pipe using 21/2 GI pipe,11/4 pipeB Class and 5204 PremiumBearing, poly Urethane coating painting with coating thickness of primer 30 micrones and PU Top coating 55 microns including cost and conveyance of all materials and labour charges etc. 57 Supply and fixing of 4metre Lengthsingle Bracket pole with Base plate ( 250 x 250 x 6mm) 76.10mm OD x 3.65 mm thick x 4000mm length etc., completed ( PWD SOR Page No.148) Sl No.XV --1 58 Supply of 25w LED Streetlight Fitting with LED Etc., completed., 59 Earthing as per PWD Standard Specification with on earth Electrode of 2m Class B Pipe of dia not less than 32mm Completed. Brass Cable Evenet for Suitable of 4 x 16 Sq.mm etc., completed,, 60 Wiring with 2 x 1.5 sqmm (22/0.3) PVC insulatedunshealhed SC.Cu.conductor of1100V grade in suitable PVC rigid Pipe on wall and ceiling with PVC accessorieswith TW switch box with 5A F.T. switch inflush with wall, coveredwith hylum sheet of 3mm thick with painting of suitable colour for open PVClight/fan point(For Electronic regulator) (5 pointsper coil). 61 Supply and fixing of 20lit capacity tilting type stainless steel garbage bins in park area as per the site condition and as directed by the departmental officers. 62 Supply and Planting of sapling of height 180-2 facant in polythene bag of dia 300m including supportingof5cm dia casuling pile of 10feet height including loading and unloading change per transportation Neem Tree 63 Ficus Benjamina 64 PungaiTree 65 Providing Three Seater arrangements with Ready made Granite benches 20mm thick Slab with 1500mm wide , 600mm height. The cost shall include all labour and materials and as directed by the departmental officers. 66 Provision For GST-18%
