Tender For Construction Of Processing Shed 143.75 Sqm And Warehouse (300 Mt)
Tender Value
71.08 Lakhs
Estimated cost
Bid Submission
30 May 2025
0 days left
EMD
Ref. Documents
Bank guarantee accepted
Document Fee
1000
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
radhanagari → Maharashtra
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Construction Of Processing Shed 143.75 Sqm And Warehouse (300 Mt)
BOQ
| Sl. No. | Item Description |
| 1 | A: CIVIL PORTION |
| 2 | Excavationforfoundationinearth,soilofalltypes,sand,gravelandsoftmurum, including removingtheexcavatedmaterialuptoadistanceof50m.beyondthe buildingareaand stackingandspreadingasdirected,dewatering,preparingthebed forthefoundationand necessary back filling, ramming, watering including shoring and strutting including all leads and lifts etc.complete. |
| 3 | Excavation for foundation in hard murum including removing the excavated material upto distance of 50 metres beyond the building area and stacking and spreading as directed, dewatering, preparing the bed for the foundation and necessary back filling, ramming, watering including shoring and strutting including all leads and lifts etc.complete. |
| 4 | Providingdry/trap/granite/quartzite/gneissrubblestonesoling15cmto20cm thick including hand packing and compact ingincluding all leads and lifts etc.complete. |
| 5 | Providing and laying Cast in situ/ReadyMix cement concrete in M-10 of trap/ granite/quartzite/ gneiss metal for foundation and bedding including bailing out water, Steelcentering,formwork,laying/pumping,compacting,rougheningthemif special finish is to be provided,finishingifrequiredandcuringcomplete,withfully automatic micro processorbasedPLCwithSCADAenabledreversibleDrumType mixer/concrete Batch mix plant (Pan mixer) etc. complete.With fine aggregate (Crushed sand VSI Grade) including all leads and lifts etc.complete. |
| 6 | Providingandlayinginsitu/ReadyMix cementconcrete M-20 oftrap/granite /quartzite/ gneiss metalforR.C.C.work infoundationslikeraft,stripfoundations, grillageand footingsofR.C.C.columnsandsteelstanchions etc.includingbailing outwater, Steel centeringformwork,laying/pumpingcoverblocks,compactionand curing roughening the surface if special finish is to be provided (Excluding reinforcement and structural steel) etc. complete, with fully automatic micro processor based PLC with SCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) including all leads and lifts etc.complete. |
| 7 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite /quartzite/ gneiss metal for R.C.C. columns as per detailed designs and drawing or as directed including steel centering, formwork, cover blocks, laying/pumping, compaction finishing the formed surfaces with cement mortar 1:3 of sufficient minimum thickness to give a smooth and even surface or roughening if special finish is to beprovidedandcuringetc.complete.(Excludingreinforcementandstructural steel).withfully automaticmicroprocessorbasedPLCwithSCADA enabledreversible DrumTypemixer/concreteBatchmixplant(Panmixer)including all leads and lifts etc.complete. |
| 8 | Providing and laying Cast in situ/Ready Mix cement concrete M-20 of trap / granite/quartzite/gneissmetal forR.C.C.beamsandlintelsasperdetaileddesignsand drawings or asdirectedincludingsteelcentering,formwork,coverblocks, laying/pumping,compactionand roughening the surface if special finish is to be providedandcuringetc. complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADAenabledreversible DrumTypemixer/concreteBatchmixplant(Panmixer)including all leads and lifts etc.complete. |
| 9 | ProvidingandlayingCastinsitu/ReadyMixcementconcreteM-20oftrap/granite/ quartzite/gneissmetal forR.C.C.chajjaasperdetaileddesignanddrawingsincluding steel centering, formwork, cover blocks, laying/pumping, compacting androughening the surface ifspecial finish is to be provided and curing complete. (Excluding reinforcement and structural steel). withfullyautomaticmicroprocessorbasedPLCwithSCADA enabled reversible DrumType mixer/ concrete Batch mix plant (Pan mixer) including all leads and lifts etc.complete. |
| 10 | Providing and fixing in position TMT - FE - 500 bar reinforcement of various diameters forR.C.C.pile caps,footings,foundations,slabs,beams columns,canopies, staircase, newels,chajjas, lintels pardis, copings, fins, arches etc. as per detailed designs,drawingsand schedules. including cutting, bending, hooking the bars, binding with wires or tack welding and supporting as requiredincluding all leads and lifts etc.complete. |
| 11 | ProvidingandlayingCastinsitu/Ready MixcementconcreteinM15of trap/ granite/quartzite/gneissmetalforbedblocks,foundationblocksand suchother itemsincluding bailing out water,Steel centering,formwork, laying/ pumping, compacting, rougheningthemifspecialfinishistobeprovided,finishinguneven and honeycombedsurfaceandcuringetc.complete.TheCementMortar1:3plasteris considered for rendering uneven and honeycombed surface only. Newly laid concrete shall becoveredbygunnybag,plastic, tarpaulin etc. (Wooden centering will not be allowed.), with fully automatic microprocessorbasedPLCwithSCADA enabled reversible Drum Type mixer/ concrete Batch mix plant (Pan mixer) including all leads and lifts etc.complete. |
| 12 | ProvidingandlayinginsitucementconcreteM20withtremixtreatmentfor100 mm thicknessforflooringwithgroovecuttingof4mmwideand20mm deepwith necessary refilling with bitumenincluding all leads and lifts etc.complete. |
| 13 | Filling in plinth and floors with contractorsmaterial/brought from outside and approved byEngineer inchargein layers of 15 cmto 20 cm including watering and compactionincluding all leads and lifts etc.complete. |
| 14 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksin cementmortar1:6infoundationsandplinthofinnerwalls/inplinthexternalwalls includingbailingoutwatermanually,strikingjointsonunexposed faces,rakingout joints on exposedfaces and watering including all leads and lifts etc.complete. |
| 15 | Providing secondclassBurntBrickmasonrywithconventional/I.S.typebricksin cementmortar 1:6 in superstructure including striking joints, raking out joints,wateringand scaffolding including all leads and lifts etc.complete. |
| 16 | Providinginternalcementplaster20mmthickin Singlecoatsincementmortar1:4 without neerufinish,toconcrete,bricksurface,inallpositionsincluding scaffoldingandcuringincluding all leads and lifts etc.complete. |
| 17 | Providing sand faced plaster externally in cement mortar using approved screened sand, in allpositions including base coat of 15 mm thick in cement mortar 1:4 using waterproofing compound at 1Kilogramper cement bag curing the same for not less than 2 daysandkeepingthe surface of the base coat rough to receive the sand faced treatment6to8mm thickin cementmortar1:4finishingthesurfacebytakingout grainsandcuringforfourteendays scaffoldingincluding all leads and lifts etc.complete. |
| 18 | Providing and applying priming coat on concrete/ masonary/ Asbestos Cement plastered surfaces including scaffolding if necessary, preparing the surface by thoroughly cleaningoil,grease,dirtandotherforeignmatterandsandpaperingasrequiredincluding all leads and lifts etc.complete. |
| 19 | Providingandapplyingexternalraincoatpaintingwithcrackfilling acrylicpolymer basedchemicalcompoundcoatingtotheexternalsurfaceofwallstopreventwater seepage in the masonry walls during monsoon added with required shade Steiner to give required shade to the surface in two coats. Including providing three coat of priming of polymer base primer including preparing surface scrappingthe existingloose oldpaint, removinglooseparticlesofsand on the surface opening and cleaning the cracks developed in the external plaster,removing loose particles by chiseling, filling cracks by chemicals compound of approvedmake with proper penetration etc. CoatingofRaincoatwiththehelpofbrushandasper instructions andspecification givenby manufacturerandwithinstructionfrom Engineer in- charge. Work shall be executedbycertifiedapplicatoronlyandcoveringguranteeof3yearsoncourtstamp paper of Rs. 500/- and necessary testingincluding all leads and lifts etc.complete. |
| 20 | Providing and applying plastic emulsion paint of approved quality, colour and shade to new surface in three coats including scaffolding, preparing the surface. (excluding primer coat) including all leads and lifts etc.complete. |
| 21 | Providing andfixing colourcoatedZincalume (R)AZ150(min150gms/sq.mt. totalon each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550MPayieldstrength, metallic hot dip coated with Aluminium-Zinc alloy (55%aluminium 43.4%zinc 1.6% silicon) with COLORBOND ( R ) steel quality super durable polyester paint coat ( with inorganicpigment).Thepaintshallhaveatotal coatingthicknessofnominal35um, comprising of nominal 25 um exterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050mmeffectivecoverwidthandnominal25-30mmdeepribswithsubtlesquare fluting in the five pan at nominal 180-250 mm center- to-center.The endribshallbe designedforanti-capillarygroove.andreturnleg.Thefeed material should have coil manufacturersproductdetailsmarkedaregularinterval.Includingfastenerswithmin. fastenedwithmin.25umZinc-Tinalloycoated,Hexhead,self-drillingscrew including all leads and lifts etc.complete. |
| 22 | Providing and fixing of colour coated Zincaluminium( R ) AZ150 ( min 150 gms/sq.mt. total on each side ) profiled sheets for roofing. The feed material is manufactured out of nominal 0.45 mm Base Metal Thickness ( BMT ) (0.5 mm TCT ), Hi-strength steel with min.550MPayieldstrength,metallichotdipcoatedwithAluminium-Zincalloy(55% aluminiumm43.4%zinc1.6%silicon)withCOLORBOND(R)steelqualitysuper durablepolysterpaintcoat(with inorganicpigment).Thepaintshall havea total coating thickness ofnominal 35mm, comprising of nominal 25mmexterior coat on top surface and nominal 10 um reverse coat on back surface. Profile sheet shall have nom. 950- 1050mmeffectivecoverwidthandnominal25-30mmdeepribswithsubletsquare fluting in the five pan at nominal 180-250 mmcenter- to-center.Theendribshallbe designedforanti-capacitygroove.andreturnleg.Thefeed material should have coil manufacturersproductdetailsmarkedaregularinterval.includingfastenerswithmin. fastenedwithmin.25umZinc-Tinalloycoated,Hexhead,self-drillingscrewincluding all leads and lifts etc.complete. |
| 23 | Providing and fixing self supporting steel roofing systemfor a Godown or alike made up ofstructuralgradesteelsheetof912millimeterwidth(tolerance+/-2millimeter), moulded at site using mechanical press dies to the desired curve and shape to form 605 millimeter wide interlocking panels . The interlocking panels shall be pressed to close the seam forming water tight joints for a span of 28.75 meter having arch rise as 5.75 meter, archlength33.92meter.Thebasematerialmadeupofimported galvalumesteel complying to ASTM A792having base metal thickness of 1.40 millimeter ( tolerace + / - 0.02 millimeter ) with alloy coating AZ 150 and paint coating of regular modified polyster , top coat 25 micron and bottom coat 12 micron as perapproved colour , including fixing hangers , clamps etc.as may be necessary of Proflex standard, including fixing sky light of 2 millimeter thick polycarbonate sheet of size 2\" x 14\" and turbo ventilator of 24\"\" diameter to be installed at every 30 feet along the length of roof including finishing , testing and cleaning including all leads and lifts etc.complete. |
| 24 | Providingstructuralsteelworkofrectangularhollowsteelsectionforsteeltrusses, other similartrusseditemslikepurlinandmemberswithallbracing,gussetplates etc. as perdetaileddesignsanddrawingsorasdirectedincludingcutting,fabricating, hoisting,erecting, fixinginposition making riveted/bolted/ weldedconnections and onecoatofanticorrosive paint and over it two coats of oil painting of approved quality and shadeincluding all leads and lifts etc.complete. |
| 25 | Providing and fixing rolling shutter fabricated from steel laths of minimum thickness 0.9 mm with lock plate of 3.15 mm thickness reinforced with 35 x 35 x 5 mm angle section fittedwith sliding bolts and handles for both sides, deep M.S. channel section of depth and thickness not less than 65 mm and 3.15 mm respectively with hold fast arrangements, M.S.Bracketplate300x300x3.15mmminimumsizeandshapewithsquarebar, suspension shaft of minimum 32 mm diameter, hood cover of M.S. sheet not less than 0.9 mmthicknessandofanysizeattopandsafetydevicesincludingmechanicalgear operation arrangement consisting of worm gear wheels and worms of high grade cast iron ormildsteelandonecoatofredleadprimerincluding all leads and lifts etc.complete. |
| 26 | Providing and fixing in position. (as per I.S.1868 / 1982) Aluminium sliding window of two trackswithrectangularpipe having overalldimension63.50x38.10x1.02mm atweight 0.547 Kilogram/One Running Metre. and window frame bottom track section 61.85 x 31.75 x 1.20 mm atweight0.695Kilogram/One Running Metre.Topandside track section61.85x31.75x 1.30 mm at weight 0.659 Kilogram/One Running Metre. Theshutter should beof bearing bottom 40x 18x 1.25mm at weight 0.417 Kilogram/One Running Metre. Inter locking section 40 x 18 x 1.10 mm at weight 0.469 Kilogram/One Running Metre. And handle section 40 x 18 x 1.25 mm at weight 0.417 Kilogram/OneRunningMetre.andtopsection40x18x1.25mmatweight0.417 Kilogram/Runningmetre.AsperdetaileddrawingsandasdirectedbyEngineerin chargewithallnecessaryAluminiumsectionsfixturesandfasteningssuchasroller bearinginnyloncastingandselflockingcatchfittedinverticalsectionofshutter including5 mm thick plain glass with all required screws and nutsincluding all leads and lifts etc.complete. |
| 27 | Providing and fixing mild steel grill work for windows, ventilators etc. 20 Kilogram/ One Square Metre asperdrawing including fixtures,necessarywelding andpainting with one coatsof anticorrosive paint and two coats of oil painting complete.including all leads and lifts etc.complete. |
| 28 | Providing and fixing in position factorymade box type fullyglazed window consistingof coldrolledsectionof105mmx60mmx1.25mmthickframesection filled with cementconcrete(1:2:4)andsteelsectionF4Basperdetaileddrawingand design including mild steel 12mmsquarebarsat10cmcentertocenter,requiredF7B section, section T6, section forshutterframe(LouveredclipsincaseofLouvered windowportion)and3mmthickglassofapprovedqualityofnecessaryfixturesand fastening, finishing with one coat of anticorrosive paintincluding all leads and lifts etc.complete. |
| 29 | Turbo Ventilator |
| 30 | Royalty Charge |
| 31 | a) For Murum |
| 32 | b) Soling |
| 33 | Laboratory test of construction material |
| 34 | 1)Sand |
| 35 | a) Fineness Modulus |
| 36 | b) Silt Factor. |
| 37 | 2) Concrete |
| 38 | a) Concrete Cube mould |
| 39 | 3) Cement |
| 40 | a) Standard Consistency, Fineness,SettingTime,Comprasive,Specific Gravity Strength |
| 41 | 4) Steel Bar Testing |
| 42 | a)Above 16mm (set of 3 bars) (Tensile Strength,%, eleongation,Yield stress, Weight per metere, bend/rebend test,proof stress)Ultimate tensile tress |
| 43 | 5) Bricks |
| 44 | a) Crushing Strength,Water Absorption,Efflorescence |
| 45 | 6) Aggregate |
| 46 | a)Water Absorption,Specific Gravity,impact value crushing value |
| 47 | b) Sieve Analaysis |
| 48 | Management Strategies and ImplementationPlan (MSIP) to manage the Environmental, Social, Health and Safety(ESHS) risks and ESHS Code of Conduct |
AI Tender Summary
Tender Timeline
May 10, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMay 30, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 02, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender