|
| 1 | Taking down cement or cement lime plaster, any description on brick or stone walls, etc including racking out joints, hacking for key, scrubbing down with water etc, complete all as specified and directed. |
| 2 | Demolition of brick workbuilt in cement mortar including all quoins, arches, pillars etc but excluding precast concrete articles, complete all as specified and directed. |
| 3 | M&L for brick work withsub class \"B\"bricks, straight or curved on plan exceeding6m mean radius built in cement mortar (1:6), complete all as specified and directed. |
| 4 | M&L for rendering 15 mm thick,ready mix plaster, on brick / concrete surface of external/internal surfaces ofwall, finished fair and even and including mixing of WPC as per manufacture instructions,complete all as specified and directed. Note :- 1. Contractor is required to deposit readymix bags for 100% CA quantity to Engr -in-Charge.2. WPC shall be measured and paid separately. |
| 5 | Supply only integral water proofing compound conforming to IS-2645-1975, complete all as specified and directed. |
| 6 | M&L for preparation of oldplastered or concrete surfaces of wall and applying two coats of weather coat/exterior emulsion paint, complete all as specified and directed. |
| 7 | Removing/cleaning of sand/silt, mud etc under culvert and in the drain of any width and length in soft/loose soil including depositing of removed material from site at a distance exc 900 m but n.exc 1000 m deposited where directed by Engr-in-Charge. |
| 8 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 9 | M&L for 75mm thick, PCC 1:4:8 type D-2 (40mm graded stone aggregate ) as in sub base, complete all as specified and directed. |
| 10 | M&L for 40mm thick, PCC (1:2:4) type B1 using 20 mm graded stone aggregate, finish even and smooth with using extra cement as in flooring, laid in panels, complete all as specified and directed. |
| 11 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete all as specified and directed. |
| 12 | M&L forplain cement concrete 1:2:4 type B-1 using 20 mm graded stone aggregate as in coping/Benching including necessary formwork and finishing of exposed surface, complete all as specified and directed. |
| 13 | Demolition of Re-inforced Cement Concrete in any position and any description including cutting of reinforcement bars to facilitate demolition complete all as specified and directed. |
| 14 | M&L for precast reinforced cement concrete jallies, type B-0, 1:2:4 mix using 12.5mm graded stone aggregate, 35mm thick (Measured solid) set in cement mortar 1:4 including all mouldings, complete all as specified and directed. |
| 15 | M&L for Providing precast cement concrete (1:2:4 type B-1 with using 20mm graded stone aggregate) as in landings, cover slabs (for manholes etc). Chulah hoods, chajjas, water troughs, mangers, shelves and similar articles with plain faces and set in cement mortar (1:4), complete all as specified and directed. |
| 16 | M & L for mild steel TMT bars 8mm to 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 17 | M&L for 75 mm thick Plain cement concrete, 1:2:4 Type B-1 (using 20 mm graded stone aggregate) as in floors, paving etc, finishing the surface even and smooth with using extra cement andincluding use and waste of form work, complete all as specified and directed. |
| 18 | M&L for 60 mm thick precast cement concrete coloured interlocking tiles of grade M-35 any shape and size confirming to IS 15658-2006 with grey cement and pigmentin floors / pavements including 30 mm thick sand cushioning, complete all as specified and directed. |
| 19 | M&L for 250X250X50 mm thick precast cement concrete interlocking paver blocks with holes as directed by Engineer in charge, with grey cement and pigmentlaid in well rammed earth in floors / pavementscomplete all as specified and directed. |
| 20 | Dismantling of wrought iron or mild steel work any description and fixed in any position complete all as specified and directed. |
| 21 | M&L for Framed work such as grills, gratings etc., with ends of bars shouldered and/or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0, complete all as specified and directed. |
| 22 | Dismantling posts or struts (Steel or RCC) any section embedded in natural ground including taking out embedded portion in concrete, brick work or masonry and making good to disturbed surfaces complete all as specified and directed. |
| 23 | Dismantling fencing wire mesh, any type complete all as specified and directed |
| 24 | M&L for PCC 1:2:4 type B1 (using 20 mm graded stone aggregate) as in for fixing angle iron and coping including necessary form work., complete all as specified and directed. |
| 25 | S&F mild steel workas in posts and struts in fencing including cutting tops to shaps as directed, drilling holes, notching for wire,etc ;flat iron fillets (for securing wire mesh etc) embedded in concrete/mosnary complete duly tar painted and sanded the embedded portion of angle iron including all necessary drilling, bolting or riveting etc and similar work conforming to Fe-290 Gde E-165 complete all as specified and directed |
| 26 | M&L for providing and fixing concertina, spiral, coil fencing with punched tape, concentrina coil of 600 mm dia and 6 m maximum openable length, upto 3 m height of wall with angle iron \"Y\" shaped with 9 horizontal RBT reinforced barbed wire studied with GI staples and GI clips to retain horizontal including necessary bolts or GI barbed wire tied to angle iron, complete all as per direction of EIC,inlcudes reinforced barbed wire tape (RBT)/spring core (2.5 mm thick) wire of tensile strength of 165 kg/sqmm with tape (0.52mm thick) and weight 43.47 gm/m including taking down of old unserviceable concertina coil complete all as specified and directed. |
| 27 | S&F in repairs Galvanised, 2 strand, steel barbed wire 2.24mm dia barbed with 2mm dia barbs at 75mm spacing and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanized mild steel wire, staples or steel pins etc, complete all as specified and directedNote : Each line of wire shall be measured. |
| 28 | Supply only Chain link MS Galvanized fencing, any size or type complete all as specified and directed |
| 29 | Fixing only chain link fencing incl line wires, any mesh, size and type to any type of standards, rails, straining blots, etc. including provision of binding wire. complete all as specified and directed. |
| 30 | M&L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 31 | M&L forPrecast cement concrete 1:2:4 type B-1 using 20mm graded stone aggregate as in block for road side kerb stone as per sample approved by GE, includinglaying and setting in cement mortar (1:4) including demolition of old PCC kerb stone complete all as specified and directed. |
| 32 | M&L for preparation of new or previously untreated plastered or concrete surfaces and applying two coats of weather coat over a coat of primer complete all as specified and directed. |
| 33 | M&L for preparation of newly plastered surfaces and applying two coats of cement base paint over a coat of alkali resistant primer complete all as specified and directed. |
| 34 | Dismantling floor, hearth or wall tilesincluding cement mortar, concrete bedding andremoving rubbish off the premises complete all as specified and directed. |
| 35 | M&L for Glazed ceramic coloured/printed tiles in vertical surface, of size 450x350x7-8mm thick as in skirting and dado, set and jointed in neat cement slurry and pointed in white or colour cement to match including 10mm thick backing coat in cement mortar (1:4), complete all as specified and directed. |
| 36 | Material and labour for non skid coloured(dark shade as approved by EIC) ceramictiles 7-8 mm thick, area of each tiles exceeding 0.11 Sqm bur not exc 0.18 Sqm as in floors etc, set and jointed in neat cement slurry and pointed in white or coloured cement with pigment to match the shade of tiles over andincluding 20 mm thick screed bed in cement mortar (1:6), complete all as specified and as directed. |
| 37 | M&L for complete removal of existing treatment from walls, fins, chajja etc shall include brooming down or steel wire brushing, scrubbing down smoke soot, moulds, moss and efflorescence salts and treating oil and greasy spots and removing debris to low lying area outside of MoD land and applying 3 mm thick waterproofwall care putty to obtain even and smooth surface by rubbing with sand paper, complete all as specified and directed. |
| 38 | M&L for applying two coats ofacrylic smooth exterior weatherproof (water based) paint (in camouflage pattern as per CCD pattern approved by Stn HQ) of dark colours/shade on walls (shade as approved by GE) .Two coats applied @ 1.67 ltr/10 sqm per coat over and including priming coat of exterior primer (water based) applied @ 2.20 kg/10 sqm), complete all as specified and directed. |
| 39 | M&L for preparation of newly plastered surfaces of wall/roof parapets etc and applying3 mm thicka layer ofwaterproof wall care puttyandapplying two coats of weather proof exterior emulsion (water based)paint (in camouflage pattern as perCCD patternapproved by Stn HQ) of dark colours/shade on walls (shade as approved by GE) including 1 coat of water based exterior primer on walls complete all as specified and directed. |
| 40 | M&L for preparation of old painted steel surfaces of corrugated roofing sheet and applying two coats of synthetic enamel paint (in camouflage pattern as per CCD pattern approved by Stn HQ)) of dark colours/shade (shade as approved by GE) on roofs/sheds etc, complete all as specified and directed. |
| 41 | M&L for Steel work in tubular trusses and purlins including special shaped washer etc. complete using ERW or induction butt welded tubes conforming to IS 1161-1979 grade St.-240, complete all as specified and directed. |
| 42 | M&L for coloured exterior paver tiles of size 300x300x8 to12 mm thick, with grey cement and pigments, set, jointed and pointed in neat cement slurry in floors over and includingscreed bed 20 mm thick in cement mortar (1:6), complete all as specified and directed. |