|
| 1 | For Lighting Load |
| 2 | Supplying and fixing 15/16 A (Havells Make, 240V DP with fuse on L&N) Sheet steel Main Switches on flat iron frame on wall. |
| 3 | Supplying and fixing 240/415 V MCB Isolator on din rail of existing DBs and necessary connection Lagrand Double Pole32 A |
| 4 | Supplying & Fixing bulk head light fitting (Havells make) with die cast aluminium housing & frosted glass on wall/ceiling incl. S&F 8watt CFL/100watt GLSlamp complete set. |
| 5 | Wiring from 15/16A DPIC main switch to Busbar box in 1.1 KV grade single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC)of following sizes in 25mm PVC casing-capping (Precision make) incl. necy. PVC clips, fittings etc. (c) 2 x 36/0.3 (2.5 sqmm) + 1 x 22/0.3 (1.5 sqmm) |
| 6 | Distribution wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single corestranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to light/fan/call bell point with piano key type switch (Anchor make) fixed on sheet steel fabricated switch board with Perspex/bakelite top coveron wall incl. necy. connections and making earthing attachment and mending good damages to building works. [PVC casing-capping and Switch board both on surface](b) Average run 6 mtr. |
| 7 | Distribution Wiring in 1.1 KV grade 2x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire (Brand approved by EIC) in suitable size PVC casing-capping (Precision make) with 1x22/0.3 (1.5 sqmm) single core stranded \"FR\" PVC insulated & unsheathed copper wire for ECC, incl. necy. PVC clips, fittings etc. to 5A 3 pin flush type plug socket with piano key type switch (Anchor make) fixed on sheet steel fabricated CRC MS switch board with bakelite / perspex (wall matching color) top cover of 3 mm thick flushed in wall by housing the board after cutting brick wall incl. necy. connection making earthing attachment, painting and mending good damages to building works [PVC casing-capping and plug box both on surface] |
| 8 | Supply & Fixing angular batten holder (Anchor) on 75mm dia PVC round block / round bakelite on wall/ceiling |
| 9 | For Motor wiring |
| 10 | Fixing only TPN switch fuse units in Sheet Steel enclosure with HRC fuses on angle iron frame on wall for 32A to 400A. [Main switch will be supplied departmentally] |
| 11 | Fixing only 63 Amps 415V TP/TPN Sheet Steel Main Switch (Rewireable type)/ Change over on Flat Iron Frame/Angle Iron Frame on wallOn angle iron frame. [Main switch will be supplied departmentally] |
| 12 | Fixing only MS sheet metal 4 bars 200 Amps busbar Chamber on angle iron frame on wall.[Busbar will be supplied departmentally] |
| 13 | Fitting & fixing of(DOL or Start- Delta/Auto-Transformer) with Nuts & bolts fixed on Angle iron frame on wall and making necessary connection with the electrical equipments(ii) Star-Delta/Auto-Transformer Starter (above 15 HP upto 25 HP) [Starter will be supplied departmentally] |
| 14 | Fixing Volt meter(1 No.),Ammeter (2 No.) and Selector switch(1 No.) with necessary screws and other fixing materials including making holes where necessary and making connections.[Voltmeter,Ammeter & Selector switch will be supplied departmentally] |
| 15 | Supplying, fitting & fixing 350 mm x 250 mm x 25 mm size Wooden Plank on wall (for fitting & fixing of electrial equipments as necessary on the plank). |
| 16 | Meter loop connection with 1.1 KV G.R. 3.5 core /4 core 10 sqmm to 50 sq.mm PVC/XLPE insulated and sheathed and armoured Al /Cu Cable from Meter to incoming TPN Main Switch/Terminal (Brand: Gloster/Havell/Finolex).(d) For Major RLI Scheme(i) 50 sq.mm 3.5 core Al Cable |
| 17 | Supplying and drawing with 1.1 KV, PVC flexible \"FR\"cables Cu conductor conforming to IS:694 in suitable size with fitting & fixing on wall/Kiosk Box including making necessary connection to the prefixed devices with all necessary accessories like saddle, screw, clips, gland, socket etc. conforming to IEE Regulation and asper direction of EIC. (i) 4CX25 sq.mm Cu cable conforming to IS:694 in [100/200Amp TPC Switch to Busbar] |
| 18 | Supplying and drawing with 1.1 KV, PVC flexible \"FR\"cables Cu conductor conforming to IS:694 in suitable size with fitting & fixing on wall/Kiosk Box including making necessary connection to the prefixed devices with all necessary accessories like saddle, screw, clips, gland, socket etc. conforming to IEE Regulation and asper direction of EIC. (ii) 3CX16 sq.mm Cu cable conforming to IS:694 in [Busbar to 63 Amp TP Main Switch and 63 A TP Main Switch to Motor Starter and Busbar to Voltmeter/Ammeter/Selector switch] |
| 19 | Supplying and drawing with 1.1 KV, PVC flexible \"FR\"cables Cu conductor conforming to IS:694 in suitable size with fitting & fixing on wall/Kiosk Box including making necessary connection to the prefixed devices with all necessary accessories like saddle, screw, clips, gland, socket etc. conforming to IEE Regulation and asper direction of EIC. (iii) 2X3CX10 sq.mm Cu cable conforming to IS:694 in 32 mm GI Conduit (ISI Medium Quality) [Star-Delta Motor Starter to Motor] |
| 20 | Finishing of the PVC insulated wire ends by socketing with pin /ring type copper sockets and insulated tapes etc including supplying sockets and tapes |
| 21 | Finishing the end of following XLPE/PVC armoured cable by crimping method incl supplying and fixing solderless sockets (Dowel make) tapes ,anticorrosive paste ,jointing materials (i) 4core 25 sqmm cable |
| 22 | Finishing the end of following XLPE/PVC armoured cable by crimping method incl supplying and fixing solderless sockets (Dowel make) tapes ,anticorrosive paste ,jointing materials (i) 3.5 core 50 sqmm cable |
| 23 | Supply & Fixing EI danger board on wall(b) 20 cm x 30 cm (8\"x12\") |
| 24 | Earthing with 50 mm dia GI pipe 3.64 mm thick x 3.04 Mts. long and 1 x 4 SWG GI (Hot Dip) wire (4 Mts. long), 13 mm dia x 80 mm long GI bolts, double nuts, double washers incl. S & F 15 mm dia GI pipe protection (1 Mts. long) to be filled with bitumen partly under the ground level and partly above ground level driven to an average depth of 3.65 Mts. below the ground level as below: (a) By ISI-Medium GI pipe |
| 25 | (a) Supplying & fixing earth busbar of galvanized (Hot Dip) MS flat 25 mm x 6 mm on wall having clearance of 6 mm from wall including providing drilled holes on the busbar complete with GI bolts, nuts, washers, spacing insulators etc. as required. |
| 26 | Connecting the equipments to earth busbar including S & F GI (Hot Dip) wire of size as below on wall/floor with staples buried inside wall/floor as required and making connection to equipments with bolts, nuts, washers, cable lugs etc. asrequired and mending good damages.a) Solid GI wire (iii) No. 8 SWG |
| 27 | Insulation testing of internal wiring of Pump House/Kiosk Box including wiring of electric Motor & other ancilary equipments by means of Megger. |
| 28 | Supply and fixing of wall mounting type angle iron frame made from G.I angle (40 X40 X5 mm) thick for fixing of control equipments. |
| 29 | Carrage of materials (To be supplied Departmentally from Sub-Divisional Store to Work Site) |
| 30 | Considering Extra Rates @5% for Murshidabad District & applicable for PWD Schedule item only |
| 31 | Add 18% GST |
| 32 | Add 1% Labour Cess |