|
| 1 | Supplying and Erection of following size swaged type steel tubular poles as IS : 2713 (part II) - 1980, having painted with 2 coats of anti –corrosive primer and 2 coats of aluminum paints including Base Plate having size of 350*350*8mm in cement concrete 1:3:6 (1 cement : 3 coarse sand : 6 graded stone aggregate 40 mm nominal size) foundation including excavation and refilling etc. as required. 410SP-46 (overall length- 10 mtr, approx weight- 208 Kg + 7.70 Kg = 215.70 Kg) |
| 2 | Fabrication Supplying & installation of 03 Nos 150 mm (W) X 75 mm (H) X 5.7 (T) mm M SChannel having lengths of 1500 mm, 300mm and 300 mm LED flood lighting brackets suitable for mounting of 3/4 nos. LED flood light luminaries on 10 meter long steel tubular poles required to be fixed with 02 Nos 6 mm thick 250 mm dia (outer ) M.S. Flange duly welded with 139.7 mm dia 4.50 mm thick 300 mm long ms pipe having 4 no’s 18mm dia symmetrically located holes having painted with 2 coats of anti –corrosive primer and 2 coats of aluminum paints. Drawing of flood lighting bracket will be provided to L-1 vendor. |
| 3 | Fabrication supply installation and commissioning of CPRI approved outdoor type cubical canopy based Bus Bar Box with IP54 protection grade made up of 2.5 mm thick CRAC sheet done with 70 micron Powder Coating (RAL-7032) after 7 tank chemical pretreatment having 150 mm deep and 350 mm x 250 mm surface area excluding canopy with front openable door including suitable MS clamp for mounting on pole, nut bolts gasket and locking arrangements and Alluminum(E91E Grade) TP+N with Current Density 0.8A/sq. mm -100 Amps with suitable insulation support etc as req. |
| 4 | Fabrication supply installation and commissioning of CPRI approved outdoor type cubical canopy based LED driver Box with IP54 protection grade made up of 3 mm thick CRAC sheet done with 70 micron Powder Coating (RAL-7032) after 7 tank chemical pretreatment having 250 mm deep and 600 mm x 400 mm surface area excluding canopy with front openable door welded with Suitable 2 Nos hinges (Min 100*50 mm made up of 2 mm thick SS material) ,GI channel 600 mm x 60 mm for mounting of 03 Nos LED drivers including suitable GI clamp for mounting on pole nut bolts gasket and locking arrangements with suitable insulation supportand 30 way DIN Rail - 01 Nos, 16 AMPs DP MCB C series- 01 Nos, 6 AMPs SP MCB C series- 04 Nos, PVC Connector - 24 Nos and interconnection with 1.5 sqmm FRLS flexible copper cable andmaking 01 Nos, 20 mm dia symmetrically located hole for enterence of cable etc as required.etc as req. |
| 5 | Supplying and Laying of3.5 x 25 Sqmm Aluminum conductor PVC insulated and PVC sheathed armored UG cable of 1.1 KV grade in the 75 mm DWC pipe with proper coupling of socket at a depth upto 75 cm including excavation and refilling of earth etc as required Make- Havells/Finolex/Polycab |
| 6 | Supplying and laying 25 mm X 5 mm G.I strip along the MS pole as strip earth electrode, including connection/ terminating with G.I. nut, bolt, spring, washer etc. as required |
| 7 | Supplying and making end termination with brass compression gland and aluminium lugs for following size of PVC insulated and PVC sheathed / XLPE aluminium conductor cable of 1.1 KV grade as required.a) 3½ X 25 sq. mm (28mm) |
| 8 | Dismantling of 07 Mtr height tubular pole embedded in cement concrete foundation etc. as required |
| 9 | Installation of 01 Nos flood lights on the newly installed 10 Mtr tubular pole after Dismantling from existing 7 Mtr pole including suitable GI nut bolt & washer etc. as required |
| 10 | Supplying and drawing of 1.50 sq. mm 3 Core PVC insulated and FR PVC Round Sheathed, Copper Conductor (flexible) industrial cable, 1100 Volt, conforming to IS 694 from top of the pole to the junction box( Make like: Havells-WHMFDSKB31X0/ Anchor/ Polycab/ Finolex/ RR Kabel) |
| 11 | Supplying and laying of 90 mm diaHDPE pipe (PE-100) OD 3 inch, minimum pressure 8.0 Kg and SDR 17,ISI marked conforming to IS 4984:2016 along with pole for protecton of UG Cables etc. as required |
| 12 | Buyback of existing 07 Mtr height tubular pole, including bracket and Control gear box \"as is where is\" basis excluding switchgears, LED driver and other electrical accesories in control gear box, embedded in cement concrete foundation - weight approx- 70 Kg. vendors are advised to check the latest condition of poles on ground. |
