|
| 1 | Labour for site clearance and cleaning old wall, surface, roof etc. all complete job. |
| 2 | Dismantling old plaster and pointing in cement or lime and raking out joints to 15mm depth, watering and disposal of unserviceable materials with all leads all complete as per direction of E/I.(5.10.7) |
| 3 | Providiag designation 75B brick work in Cement Mortar (1:6) in superstructure with approved quality of clean coarse sand of F.M. 2 to 2.5 including providing 10mm thick mortar joints, cost of screening materials, raking out joints to 15mm depth, curing taxes and royalty all complete job as per building specificition and direction of E/l. |
| 4 | Providing 12 mm thick cement plaster (1:6) with clean coarse sand of F.M. 1.5 including screening, curing with all leads and lifts of water, scaffolding, taxes androyalty all complete as per specification and direcition of E/l.B.C.D. S.O.R. Item No. 5.7.3 |
| 5 | Providing 6mm cement plaster (1:4) in ceiling with clean coarse sand of F.M 1.5 including cost of screening, taxes and royalty all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.7.6 |
| 6 | Supplying, Fitting and fixing M.S grill made of 20 x 6mm M.S. flat as per approved design and drawing, properly fabricated with joints continuous fillet welded and finished smooth, hoisting carriage of grill to work site hoisting as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.5.12 |
| 7 | Providing two coat of synthetic enamel paint of approved shade and make over steel surface including cleaning the surface thoroughly, scaffolding and taxes all complete as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.45 |
| 8 | Providing P.C.C. M-200 with nominal mix of (1:1½:3) over roof with approved quality of stone chips 20mm to 6mm size graded and clean coarse sand of requisite F.M (2.5 to 3) including screening, shuttening, mixing cement concrete in mixer and placing in position, vibriting, striking, curing taxes and royalty all complete as per building specification and direction of E/l.B.C.D. S.O.R. Item No. 5.3.2.1 |
| 9 | Providing and laying APP (Atactic Polypropylene Polymer)modified prefabricated five layer 3mm thick water proofing membrene,black finished reinforced with non woven polyster matt consistingof a coatof bitumen primer for bitumenmembrene @0.40 lit/sqm by the same membrene manufacture of density at 25 degree celcious........do...... of E/I DSR 14.91.1 |
| 10 | Providing and applying plaster of paris putty of 2 mm thickness over plastered surface to prepare the surface even and smooth complete.D.S.R. Item No. 13.26 |
| 11 | Providing two coats of oil bound distemper of approved shade and make over a coat of cement primer over new surface including preparing the plastered surface by rubbing smooth with pumice stone or fine sand paper, applying putty where required, scaffolding , washing of floors and taxes all complete as per specification and direction of E/I.B.C.D. S.O.R. Item No. 5.8.18 |
| 12 | Finishing walls with Acrylic Smooth exterior paint of required shade : New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 2.20 kg/10 sqm).D.S.R. Item No. 13.46.1 |
| 13 | Dismantling patent stone flooring work including stacking serviceable materials in countable stacks within 15m lead and disposal of unserviceable materials as per building specification and direction of E/I.B.C.D. S.O.R. Item No. 5.10.4 |
| 14 | Providing and laying Doublecharge vitrified floor tiles in different sizes(thickness to be specified by the manufacturer) with water absorptionless than 0.08% and conforming to IS: 15622 / ISO 13006 of approvedmake, in all colours and shades, laid on 20mm thick cement mortar 1:4(1 cement : 4 coarse sand), jointing with grey cement slurry @ 3.3 kg/sqm including grouting the joints with white cement and matching pigments etc., complete. Size of Tile 600x600 mm .B.C.D. S.O.R. Item No. 5.6.28 |
| 15 | Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) 110mm dia Single socketed pipes.D.S.R. Item No. 12.41.2 |
| 16 | Making plinth protection 50mm thick of cement concrete (1:3:6) (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry brick ballast 40mm nominal size well rammed and consolidated and grouted with fine sand including finishing the top smooth. (5.3.8) |
| 17 | Providing 250mm. Wide brick drain in cement mortar (1:6) with av. 150mm clear depth and 250mm apron including cost of eartwork involved with 75mm cement concrete (1:4:3) over one brick designation 75A flat soling in proper grade and slope at the base the drain duly plastered in C.M. (1:3) with punning over exposed surface all complete as per building specification and direction of E/I. |
| 18 | Providing and laying 25mm thick kotah stone slab flooring of approved size , texture and colour over 19mm thick base of lime mortar (1:1:1) ( lime :putty:surkhi:coarse sand) laid over and jointedwith grey cement slurry mixed with pigment to match the shade of slab including rubbing and polishing to granolithick finish with approve quality of carborandum stone including cost of curing taxes and royltyall complete as per building specification and direction of E/I. 5.6.19 (iv) |
| 19 | Taking down old door and window shutters including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.B.C.D. S.O.R. Item No. 5.10.10 |
| 20 | Taking down chaukhats in doors including stacking serviceable materials within 15M. lead and disposal of unserviceable materials with all leads all complete as per direction of E/I.B.C.D. S.O.R. Item No. 5.10.11 |
| 21 | Supplying, fitting and fixing 35mm thick solid core type non-decorative single leaf flush door shutter in door and windowswith black board core blended with high qualityphenol formal dehydes synthetic resine both side commercial veneered of standard make with oxidised iron fittings such as hinges, towerbolts, handle, cleat and sand blocks and taxes all complete as per building specification and direction of E/I. 5.4.38 |
| 22 | Providing and fixing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/appropriate Z sections and other sections of approved mak+B50e conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fastenersto be paid for separately) : For fixed Portion : Powder coated aluminium (minimum thickness of powder coating 50 micron) DSR 21.1.1.2 |
| 23 | For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) Powder coated aluminium (minimum thickness of powder coating 50 micron) DSR 21.1.2.2 |
| 24 | Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of Engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item) : With float glass panes of 5.0 mm thickness DSR 21.3.2 |
| 25 | Carriage of materials(i) Cement |
| 26 | (ii) Sand |
| 27 | (iii) Stone Chips |
| 28 | (iv) Brics |
| 29 | Wiring for light point/ fan point/ exhaust fan point/ call bell point with 1.5 sq.mm FR PVC insulated copper conductor single core cable in surface / recessed medium class PVC conduit, with piano type switch, phenolic laminated sheet, suitable size M.S. box and earthing the point with 1.5 sq.mm. FR PVC insulated copper conductor single core cable etc as required. |
| 30 | Wiring for circuit/ submain wiring along with earth wire with the following sizes of FR PVC insulated copper conductor, single core cable in surface/ recessed steel conduit as required.2 x 2.5 sq.mm + 1 x 2.5 sq.mm earth wire |
| 31 | 2 x 10 sq.mm + 1 x 10 sq.mm earth wire |
| 32 | Supplying and fixing 3 pin, 5 amp ceiling rose on the existing junction box/ wooden block including connection etc as required. |
| 33 | Supplying and fixing brass batten/angle holder including connection etc. as required. |
| 34 | Providing and fixing following capacity TP&N disconnector fuse switch unit inside the existing panel board with ISI marked HRC fuses including drilling holes in cubicle panel, making connections, etc. as required.63 amps Double Pole |
| 35 | Earthing with G.I. earth pipe 4.5 metre long, 40 mm dia including accessories, and providing masonry enclosure with cover plate having locking arrangement and watering pipe etc. with charcoal/ coke and salt as required. |
| 36 | Supplying and laying 8 SWG copper wire at 0.50 mtr below ground level for conductor earth electrode including soldering etc. as required. |
| 37 | Supplying and fixing metal box of following sizes (nominal size) on surface or in recess with suitable size of phenolic laminated sheet cover in front including painting etc as required.75mm x 75mm x 50mm |
| 38 | 121mm x 173mm x 48mm |
| 39 | 170mm x 221mm x 48mm |
| 40 | 210mm x 206mm x 48mm |
| 41 | Supplying and fixing of ceiling fan - 48\" dia with regulator. |
| 42 | Installation, testing and commissioning of ceiling fan, including wiring the down rods of standard length (upto 30 cm) with 1.5 sq. mm FR PVC insulated, copper conductor, single core cable etc. as required. |
| 43 | Supplying and fixing of holder type LED - 9/10 watt |
| 44 | Floodlight 100W :- Enviromental friendly , new genearation , aesthetically designed , ultra modern LED flood light luminaire with high dia cast housing and IP66 protection ( Make:- Havells/Bajaj- BJFL 100W LED/Philips ) |
| 45 | Supply of 12\" (300mm) metal exhaust fan |
| 46 | Supply of 3000 VA sine wave inverter input ac range 100v to 300v AC wide 90v to 300v AC standard- 180v to 260 v AC , DC Range 10.5 to 14.2 |
| 47 | Supply oftrolly for single tubular battery |
| 48 | Supply of 220/230Ah tubular lead acid battery with 36 month replacement IS:1652:1991 |
| 49 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes concealed work15 mm nominal |
| 50 | 20 mm nominal |
| 51 | Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes,external pipes, 25 mm nominal outer dia Pipes |
| 52 | Making holes in walls for laying G.I. pipes and restoring the same after pipe laying with complete job.a) 125mm thick |
| 53 | b) 250mm thick |
| 54 | Providing and fixing gate valve of approved quality with complete job, 25 mm dia |
| 55 | Supplying Polythene water storage tank of ISI mark (e.g. sintex / Sinter / Himgiri / Gangotri etc.) with cover and locking system. |
| 56 | Providing and fixing male ended 15mm dia brass bib cock with complete job |
| 57 | Supplying, fitting and fixing vitreous white glazed earthen ware wash hand basin of Parryor Hindustan or any other with complete job |
| 58 | Supplying, fitting and fixing vitreous white glazed earthen ware I.W.C. of parry Hindustan or any other with complete job , with 12.50 liter low level PVC Cistern |
| 59 | SFF flat back or angular lipped front vitreous white glazed earthen ware urinal of Hindustan Parrry or any other approved with all complete job. |
| 60 | Supplying fitting and fixing the following items complete with all with complete joba) Mirror of 6mm thick plate glass600x450mm size |
| 61 | b).Soap Dish |
| 62 | c).Towel rail |
| 63 | Making soak pit 2.5 m diameter 3.0 metre deep with 45 x 45 cm dry brick honey comb shaft with bricks and S.W. drain pipe 100 mm diameter, 1.8 m long complete as per standard design. |
| 64 | Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion.a).Door tee- 110mm |
| 65 | b) Dlain bend -110mm |
| 66 | c)Single tee without door - 110mm |
| 67 | 200x165x125mm dia borewell - Supplying all materials, labours, tools & equipments for drilling -do-(a) from 0.00 m to 50.0m |
| 68 | (b) from 51.0m to 125.0m |
| 69 | Supplying, assembling, lowering and fixing in vertical Position in bore well, unplasticized PVC medium well Casing (CM) pipe of required dia,200 mm nominal size -do- |
| 70 | Development of tube well in accordance with IS : 2800 (part I) and IS: 11189 -do- |
| 71 | Providing and fixing suitable size threaded mild steel capfor borewell of 200mm dia -do- |
| 72 | Providing and fixing suitable size threaded mild steel clamp for borewell of 200mm dia -do- |
| 73 | S/F KIRLOSKER/CRI make 1.5HP submersible pump set having 100m, including all taxes, royalty etc. all complete job as per direction of E/I. |
| 74 | (b) Starter 5HP |
| 75 | (c) 2.5 mm2 copper finolex submersible cable |
| 76 | Providing and fixing G.I. pipes complete with G.I. fittings including trenching and refilling etc. 32mm G.I Pipe -do- |
| 77 | Add 18% GST |
| 78 | Add 1% Labour Cess |
