Tender For Annual Rate Agreement For The Year 2025-26 For The Maintenance And Repair Of The Distribution System For The Junnar Municipal Concil, Junnar.

Sharing tender

Annual Rate Agreement For The Year 2025-26 For The Maintenance And Repair Of The Distribution System For The Junnar Municipal Concil, Junnar.- 1 MATERIAL 2 Supply of C.I.Mechenical compression collar coupling (popularly known as Jifty TM Collar Coupling ) Suitable for C.I. Sun Pipes (as per IS -1536 /2001) & D.I. Pipes (as per IS -8329 /2000), complete with sealing rubber gasket of S.B.R. C.I. follower glans and M.S. nut bolts. The whole assembly should be mechanically and hydraulically tested to the provisions as laid down in IS-1538/1993 3 100mm 4 150mm 5 200mm 6 250mm 7 300mm 8 350mm 9 400mm 10 450mm 11 MJP DSR 2018-19 P. No. 260, I. No. 2 12 Supply of C.I.Mechenical compression flanged / Socket Tail Piece (Populalrly known as I™ Flanged / socket Tail Piece) Suitable for making flanged connecting with the plain barrel of C.I. spun pipes (as per IS - 1536 /2000), The tail Piece complete with sealingrubber gasket of S.B.R.,C.I. follower glands and M.S. nut bolts . 13 80mm 14 100mm 15 150mm 16 200mm 17 300mm 18 350mm 19 MJP DSR 2018-19 P. No. 260 I. No. 1 20 Supply of C.I. Mechanical joint all socket, Tees as dimensionally describedin tube -18 of 13382/1992 complete with sealing rubber gasket,of SBR with cast iron follower gland & mild steel nut bolts coated or otherwise protected from &suitable for CI pipes 21 100x100x100 22 200x100x200 23 150x100x150 24 200x150x200 25 150x150x150 26 250x100x250 27 300x150x300 28 MJP DSR 2018-19 P. No. 264 ,I.No.7 29 Supply of C.I. Mechanical joint double socket with flanged tee as dimensionally describedin tube -18 of 13382/1992 complete with sealing rubber gasket,of SBR with cast iron follower gland & mild steel nut bolts coated or otherwise protected from &suitable for CI pipes 30 100x100x100 31 150x150x100 32 200x200x100 33 MJP DSR 2018-19 P. No. 264 ,I.No.8 34 Supply of C.I. Mechanical Joint Double socket 90 (1/4) Bends as dimensionaaly Described in Table -14 of IS -13382/1992 complete with sealing rubber gasket (dimensionally described in IS -12820/ 1989 ) with cast iron following gland & mild steel nut bolts coated or otherwise protected from rustin & suitable for CI pipes 35 100mm 36 150mm 37 200mm 38 250mm 39 300mm 40 MJP DSR 2018-19 P. No. 261 ,I.No.3 41 Supply of C.I. Mechanical Joint Double socket 90 (1/4) reducer asDescribed in Table -21 of IS -13382/1992 complete with sealing rubber gasket (dimensionally described in IS -12820/ 1989 ) with cast iron following gland & mild steel nut bolts coated or otherwise protected from rustin & suitable for CI pipes 42 150x100mm dia 43 200x100mm dia 44 200x150mm dia 45 300x150mm dia 46 MJP DSR 2018-19 P. No. 267 ,I.No.9 47 Providing double flange sluice valve conforming to IS-2906/14846 including work gear arrengements as per test pressure, stainless steel, spindle , caps,excluding GST leived by GOI & GOM in all respect 48 c) sluice valve -PN-1.6(without by pass) 49 65mm 50 50mm 51 80mm 52 100mm 53 150mm 54 200mm 55 250mm 56 300mm 57 350mm 58 MJP DSR 2018-19 P. No. 236 ,I.No.2 59 Providing and supplying ISI marked D.I.S.& S pipes (push on joints pressures pipes of D.I. of following class and diameters conforming to the cost of jointing materials (rubber gasket of EPDM quality ) excluding all staturoty duties and taxes levied by Govt. of India and Govt. of Mahrashtra in all respect education cess, VAT third party inspection charges of TPI agency approved by MJP, including tranist insurance ,railway freight , unloading ,stacking , etc. complete , as directed by engineer -in -charge .(IS- 1536/2001 for pipes and IS 12820/1989 or latest edition revision with amendments for rubber gaskets)(IS 18329-2000 latest version ) 60 D.I.K-7 61 100mm 62 150mm 63 200mm 64 250mm 65 300mm 66 350mm 67 400mm 68 450mm 69 MJP DSR 2018-19 P.No.86, I. No. 3 70 Providing and supplying ISI Mark rubber gasket suitable for C.I.or D.I.Pipes of all class for tyton joints including ,inspection charges, transporation to departmantel stores /site etc.excluiding leived by GOI & GOM in all respect complete 71 100mm 72 150mm 73 200mm 74 250mm 75 300mm 76 350mm 77 400mm 78 450mm 79 MJP DSR 2018-19 P. No. 254 .I. No. 21 (A) 80 Welding in all position with required number of runs, for M.S. pipe internally and /or externally including gauging Wherever necessary fixing ,appurtenance & other accessories in connection with pipe laying work as per specification . 81 6mm 82 8mm 83 MJP DSR 2018-19 P, No. 211,I.No.7(A) add 10%for H.A. 84 Supplying Brass, gunmetal material for spindle & check 85 80mm 86 Check Nut 87 100mm 88 Check Nut 89 150mm 90 Check Nut 91 200mm 92 Check Nut 93 250mm 94 Check Nut 95 300mm 96 Check Nut 97 350mm 98 Check Nut 99 400mm 100 Check Nut 101 450mm 102 Check Nut 103 Gland Russi for Sluice valve 104 6mm to 20mm 105 MATERIAL 106 Providing of ISI Mark G.I. pipes of following class & dia, excluding all local & central taxes octrol inspectipon charges ,transportation to stores etc . Complete .(ISI 1239/ 2004) Note-one coupler should be prvidedwith each full length pipe,cost of which is included in rates below 107 15mm (withoutE.D) 108 20mm 109 25mm 110 40mm 111 50mm 112 65mm 113 80mm 114 100mm 115 MJP DSR 2018-19 P. No. 110, I. No. 1(B) 116 G.I. Bend B class 117 (MJP mechanical CSR -2018-19 P. No. -14 code No-PW 1) 118 15mm 119 25mm 120 40mm 121 50mm 122 65mm 123 75mm 124 100mm 125 G. I. Tee B Class 126 (MJP mechanical CSR -2018-19 P. No. -14 code No-PW 2) 127 15mm 128 25mm 129 40mm 130 50mm 131 65mm 132 75mm 133 100mm 134 150mm 135 G.I. Coupling /Nipple B Class 136 (MJP mechanical CSR -2018-19 P. No.14 code No-PW3) 137 15mm 138 25mm 139 40mm 140 50mm 141 65mm 142 75mm 143 100mm 144 150mm 145 G.I. Union (Heavy Duty ) 146 (MJP mechanical CSR -2018-19 P. No-15 code No -PW 4) 147 15mm 148 25mm 149 40mm 150 50mm 151 M.S.Flanges 152 (MJP mechanical CSR -2018-19 P.No-16 code No -PW 10) 153 UP to 300 NB 154 Above 300 NB 155 NUT- BOLTS DSR pune PWD 16-17 156 LABOUR 157 Excavation for foundation / pipe trenches in earth, soil of all types sand ,gravel & soft murrum including removing the execavated material upto a distance of 50 meters & lifts as below, stacking &spreading as directed , normal dewatering ,preparing the bed for foundation & excluding backfilling etc complete 158 MJP DSR 2018-19 P. No. 47, I. No. 1 add 10% for H.A 159 Excavationfor foundation / pipe trenches in Hard murum & boulders,WBM roadincluding t removing the execavated material upto a distance of 50 meters beyond the area & lifts as below , stacking & spreadingas directed , normal dewatering , prepairing the bed for foundation& excluding backfilling. 160 MJP DSR 2018-19 P. No. 47, I. No. 2 add 10% for H.A. & 2% for municipal area 161 Excavation for foundation /Pipe trenches in soft rock & old cement &lime masonary foundation asphalt road including remoing the excavated materials upto a distance of 50 meter & lifts as below , stacking &spreading as directed normal dewatering , prepairing the bed for foundation & excluding backfilling 162 MJP DSR 2018-19 P. No. 47 ,I.No. 5 add 10% for H.A. 163 Excavation for foundation / pipe trenches in Hard rock & concrete road by chiseling, welding, line drying by mechanical means or by all means other than blasting including & leveling the bed, removing the excavated materials upto a distance of 50 meter & lifts as below , stacking & spreading as directed , normal dewatering , preparing the bed for foundation && excluding backfilling 164 MJP DSR 2108-19 P. No. 48 ,I. No. 7 add 10% for H.A. 165 Refiling the trenches with available excavated stuff with soft material first over pipeline & then hard material in 15 cm layers with all leads & lifts including consolidation , surcharging complete 166 MJP DSR 2018-19 P. No. 50, I. No. 15 add 10%for H.A. 167 Making cross connection to exiting distribution main of any type including excavation breaking & removing existing pipes, lowering , laying , of specials &pipes in their position ,refiling , closing the water supply in that area, dewatering & restarting the water supply etc. complete as directed by Engineer In Charge for following diameter of existing pipeline, irrespective of diameter of branch line . (the number of joints involved will be paid seperately depending upon the nature of) 168 80mm 169 100mm 170 150mm 171 200mm 172 250mm 173 300mm 174 350mm 175 400mm 176 450mm 177 MJP DSR 2018-19 P. No. 73 add 10% for H.A. 178 Dewatering the excavated trenches and pools of water in thebuilding trenches / Pipeline trenches well works by using pump and other device including disposing off water to safe distance as directed by engineer - In -charge(Including cost of 179 MJP DSR 2018-19 P. No. 52 ,I. No. 14 add 10% for H.A.& 2% for municipal area 180 Lowering laying and jointing with SBR rubber gasket C.I. / D. I. SS Pipes of various classes with C.I. /D.I. MS specials of following diameter in proper position , grade and aligments as directed by Engineer-In-charge including conveyance of material from store to site of work , including cost of jointing material and rubber rings labour etc complete 181 80mm 182 100mm 183 150mm 184 200mm 185 250mm 186 300mm 187 350mm 188 400mm 189 450mm 190 MJP DSR 2018-19 P.No. 84, I . No. 2(A) add 10% for H.A. 191 Lowering laying and jointing In position following C.I. D /F Reflux valves, Buttrefly valves and sluice valves incluiding all labour jonting material,incluiding nut bolts and giving satisfactory hydraulic testing etc. complete (Rate for all class and valves) 192 100mm 193 150mm 194 200mm 195 250mm 196 300mm 197 350mm 198 MJP DSR 2018-19 P. No. 240 ,I. No. 4 add 10% 199 Providing and constructing B.B. masnory valve chamber with 15 cm thick 1:3:6 proportion PCC bedding excluding excavation , B.B. Masnory in CM 1:5 proportion precast RCC frame and cover etc. complete as directed by Engineer-In- charge .As above of 90 x 45 cm internal size depthupto 1.2 M with pre cast RCC slab cover 200 MJP DSR 2018-19 P.No. 385 ,I. No. 1(8) add 10% for H.A. 201 Providing and laying in situ cement concrete M -15 of trap/ granite /quartzite / gneiss metal for foundation and bedding including boiling out water , from work compaction, 202 MJP DSR 2016 -17 P. No.43 ,I. No. 1(b) add 10% for H.A. MJP DSR 2018-19 P.No. 385 ,I. No. 1(8) add 10% for H.A. 203 Dismantling dead pipeline G.I. /A. C. /P.V.C. /S. W./H. D. P. E. pipe including cost of necessary excavation and refiling of trenches, breaking the joints ,lifting the pipes and stacking to the place as directed by Engineer - In - charge with all leads and lifts incluiding ceaning thearea etc complete 204 For M.S. /R.C.C./C.I. /P.S.C. 205 80mm 206 100mm 207 150mm 208 200mm 209 250mm 210 300mm 211 350mm 212 400mm 213 MJP DSR 2018-19 P. No.74 ,I. No. 11(A) add 10% for H.A. 214 For G. I./A. C. /P.V.C. /S.W./H.D.P.E. 215 80mm 216 100mm 217 150mm 218 200mm 219 250mm 220 300mm 221 350mm 222 MJP DSR 2018-19 P. No. 11 (B) add 10% for H.A. 223 Lowering laying and jointing G.I. pipes and specials of following class and diameter including conveyance from stores to site of works .All labour , giving satisfactory hydraulic test , etc. complete .Either underground or in vertical position as directed by engineer in-charge 224 15mm 225 20mm 226 25mm 227 40mm 228 50mm 229 65mm 230 80mm 231 100mm 232 MJP DSR 2018-19 P. No. 113 ,I. No. 2 (B) add 10% for H.A. 233 Providing& suppling ISI mark CI D/F reflux valve (non eturn valve)of following dia.incluiding railway freight inspection charges,unloading from railway wagon,loading into truck transportation charges upto departemental stores unloading stacking excluiding GST leived by GOI & GOM in all respect etc completeReflux valve as per I.S.5312 part I(1984) 234 c) sluice valve -PN-1.6(without by pass) 235 100mm 236 150mm 237 200mm 238 250mm 239 300mm 240 350mm 241 Providing& supplingAir Valves as per IS-14845 and MJP std specifications double orifice type combined withscrew down isolating valve,small orifice elastic ball resting on a gun metal orifice nipple,large orifice vulcanite ball seating on moulded seat ring,inlet face and drilled,incluiding insurance,loading,unloading,transportation upto departmental stores,excluiding GST leived by GOI& GOM in all respect etc complete 242 b) Air valve Double Ball flanged -PN-1.6 243 50mm 244 65mm 245 80mm 246 100mm 247 MJP DSR 2018-19 P. No. 243 ,I. No. 6 (B) 248 Lowering,laying & fixing in proper alignment an position all typs of C.I.air valves as directed by Engineer-in-charge incluiding cost of conveyance from stores to site of work,cost of all material and giving satisfactory hydraulic testing etc complete (for all class of valves) 249 b) Air valve Double Ball(PN-1 & PN-1.6) 250 50mm 251 65mm 252 80mm 253 100mm 254 MJP DSR 2018-19 P. No. 247 ,I. No. 10 (B) 255 Fairwell 1/2 256 Fairwell 1 257 Solvent(greese) 258 1UPVC Pipe 259 0.5UPVC Pipe 260 2UPVC Pipe 261 1UPVC socket 262 0.5UPVC socket 263 2UPVC socket 264 1UPVC Brass elbow 265 0.5UPVC Brass Elbow 266 1UPVC Brass F.T.A. 267 0.5UPVC Brass F.T.A. 268 1UPVC Brass M.T.A. 269 0.5UPVC Brass M.T.A. 270 1UPVCelbow 271 0.5UPVCelbow 272 2UPVCelbow 273 1UPVCT 274 0.5UPVCT 275 2UPVCT 276 1UPVCunion 277 0.5UPVCunion 278 2UPVCunion 279 end cap 280 a) 100mm 281 b) 200mm 282 c) 150mm 283 Asbestas sheet 284 (sr no. 35 to sr no. 59are as per market price) 285 Providing and supplying in std.length ISI marked rigid unplasticized PVCpipes suitable for portable water with solvent cement joints incluiding cost of couplers .excluding all staturoty duties and taxes levied by Govt. of India and Govt. of Mahrashtra in all respect education cess, VAT,chargesincluding tranist insurance ,railway freight , unloading ,stacking , etc. complete , as directed by engineer -in -charge . Note-one coupler & required cement solventshall be provided with each full length pipe cost of which is included in rates below 286 a) Working pressure 6 kg/sq.cm 287 75mm 288 90mm 289 110mm 290 MJP DSR 2018-19 P. No. 97 ,I. No. 2(b) 291 Lowering laying and jointing with PVCpipes and specials of following class and diameter including conveyance from stores to site of works .All labour , giving satisfactory hydraulic test , etc. complete . as directed by engineer in-charge 292 75mm 293 90mm 294 110mm 295 MJP DSR 2018-19 P. No. 97 ,I. No. 4 (b) 296 Fiarwel 1/2 297 Fiarwel 1/2 298 NRV Valves PN-10. 200 mm 299 NRV Valves PN-10. 350 mm 300 NRV Valves PN-10. 50 mm 301 NRV Valves PN-10. 40 mm 302 काँक्रीटी खिळे 303 1/2 U.P.V.C पाईप 304 1/2 U.P.V.C ब्रास F.T.A 305 1/2 U.P.V.C ब्रास M.T.A 306 1/2 U.P.V.C ब्रास एल्बो 307 1/2 U.P.V.C एल्बो 308 1/2 U.P.V.C टी 309 1/2 U.P.V.C टॅक नेपल 310 1/2 U.P.V.C सॉकेट 311 1/2 U.P.V.C युनेन 312 1 U.P.V.C पाईप 313 1 U.P.V.C ब्रास F.T.A 314 1 U.P.V.C ब्रास M.T.A 315 1 U.P.V.C ब्रास एल्बो 316 1 U.P.V.C टी 317 1 U.P.V.C सॉकेट 318 1 U.P.V.C टँक नेपर 319 1 U.P.V.C युनेन 320 1 U.P.V.C क्लिप 321 1 U.P.V.C वॉल्व 322 1 U.P.V.C एल्बो 323 1 G.I बेन्ड 324 1 G.I होज नेपल 325 1क्लिप 326 1 एन्ड कॅप 327 सिमेंट 328 स्वॉलवट 329 2 U.P.V.C पाईप 330 2 U.P.V.C ब्रास F.T.A 331 2 U.P.V.C ब्रास M.T.A 332 2 U.P.V.C ब्रास एल्बो 333 2 U.P.V.C टी 334 2 U.P.V.C सॉकेट 335 2 U.P.V.C टँक नेपर 336 2 U.P.V.C युनेन 337 2 U.P.V.C क्लिप 338 2 U.P.V.C वॉल्व 339 2 U.P.V.C एल्बो 340 2 G.I बेन्ड 341 2 G.I होज नेपल 342 2क्लिप 343 2 एन्ड कॅप 344 सी टँक पाण्याची टाकी 345 Providing and supplying in standard lengthsPolyethelene Pipes, confirming to IS 4984 / 14151 / 12786 / 13488 with nesessary jointing material like mechanical connector i. e. thread / insert joint / quick release coupler joint / compression fitting joint or flanged joint excluding coupler/specials, including transportation and freight charges, inspection charges, loading / unloading charges,conveyance to the departmental stores & stacking the same in closed shade duly protecting from sunrays & rains, excluding GST levied by GI & GOM􀀃in􀀃all􀀃respect􀀃etc.􀀃complete. 346 A.) PE-100,􀀃􀀃6􀀃Kg/Sq.􀀃cm􀀃: 347 i) 63􀀃mm Rmt 112 348 ii) 75􀀃mm Rmt 155 349 iii) 90􀀃mm Rmt 220 350 iv) 110􀀃mm Rmt 319 351 v) 125􀀃mm Rmt 437 352 vi) 140􀀃mm Rmt 549 353 vii) 160􀀃mm Rmt 711 354 viii) 180􀀃mm Rmt 895 355 ix) 200􀀃mm Rmt 1049 356 PE-100,􀀃8􀀃Kg/Sq.􀀃cm􀀃: 357 i) 63􀀃mm Rmt 140 358 ii) 75􀀃mm Rmt 187 359 iii) 90􀀃mm Rmt 266 360 iv) 110􀀃mm Rmt 391 361 v) 125􀀃mm Rmt 507 362 vi) 140􀀃mm Rmt 693 363 vii) 160􀀃mm Rmt 897 364 viii) 180􀀃mm Rmt 1133 365 ix) 200􀀃mm Rmt 1333 366 x) 225􀀃mm Rmt 1712 367 xi) 250􀀃mm Rmt 2110 368 xii) 280􀀃mm Rmt 2644 369 Lowering,􀀃Laying􀀃and􀀃Jointing􀀃H.􀀃D.􀀃P.􀀃E./􀀃M. D. P. E. pipes in proper position including allspecials by compression fitting/electrofusion and butt fusion jointing procedure as per relevent IS Code complete with all materials for jointing procedure like Electrofusion machine, Electric heater/butt fusion welding machine with hydraulic jack, top loading clamp etc. and all labours as directed by engineer in charge as per IS-7634 Part 370 For􀀃all􀀃classes. 371 i) 20􀀃mm Rmt. 13 372 ii) 25􀀃mm Rmt. 21 373 iii) 32􀀃mm Rmt. 26 374 iv) 40􀀃mm Rmt. 35 375 v) 50􀀃mm Rmt. 41 376 vi) 63􀀃mm Rmt. 50 377 vii) 75􀀃mm Rmt. 54 378 viii) 90􀀃mm Rmt. 75 379 ix) 110􀀃mm Rmt. 78 380 x) 125􀀃mm Rmt. 90 381 xi) 140􀀃mm Rmt. 120 382 xii) 160􀀃mm Rmt. 130 383 xiii) 180􀀃mm Rmt. 130