Essential Repair And Maintenance Of Jammu Tawi Ho Jammu Division; 1 Carriage of Materials 1.1 By Mechanical Transport including loading,unloading and stacking 1.1.1 Disposal of moorum/building rubbish/ malba/ similar unserviceable, dismantled or waste material by mechanical transport including loading, transporting, unloading to approved municipal dumping ground for lead upto 10 km for all lifts, complete as per directions of Engineer-in-charge. 10 cum 494.10 4941.00 Sub-Total 4941.00 2 CLADDING WORK 2.1 Providing and fixing Ist quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. 20 sqm 1267.95 25359.00 2.2 Designing, fabricating, testing, installing and fixing in position Curtain Wall with Aluminium Composite Panel Cladding, with open grooves for linear as well as curvilinear portions of the building , for all heights and all levels etc. including: (a) Structural analysis & design and preparation of shop drawings for pressure equalisation or rain screen principle as required, proper drainage of water to make it watertight including checking of all the structural and functional design. (b) Providing, fabricating and supplying and fixing panels of aluminium composite panel cladding in pan shape in metalic colour of approved shades made out of 4mm thick aluminium composite panel material consisting of 3mm thick FR grade mineral core sandwiched between two Aluminium sheets (each 0.5mm thick). The aluminium composite panel cladding sheet shall be coil coated, with Kynar 500 based PVDF / Lumiflon based fluoropolymer resin coating of approved colour and shade on face # 1 and polymer (Service) coating on face # 2 as specified using stainless steel screws, nuts, bolts, washers, cleats, weather silicone sealant, backer rods etc. (c) The fastening brackets of Aluminium alloy 6005 T5 / MS with Hot Dip Galvanised with serrations and serrated washers to arrest the wind load movement, fasteners, SS 316 Pins and anchor bolts of approved make in SS 316, Nylon separators to prevent bi-metallic contacts all complete required to perform as per specification and drawing The item includes cost of all material & labour component, the cost of all mock ups at site, cost of all samples of the individual components for testing in an approved laboratory, field tests on the assembled working curtain wall with aluminium composite panel cladding, cleaning and protection of the curtain wall with aluminium composite panel cladding till the handing over of the building for occupation. Base frame work for ACP cladding is payable under the relevant aluminium item.s The Contractor shall provide curtain wall with aluminium composite panel cladding, having all the performance characteristics all complete , as per the Architectural drawings, as per item description, as specified, as per the approved shop drawings and as directed by the Engineer-in-Charge. However, for the purpose of payment, only the actual area on the external face of the curtain wall with Aluminum Composite Panel Cladding (including width of groove) shall be measured in sqm. up to two decimal places. 3 WOOD AND P. V. C. WORK 3.1 Providing wood work in frames of doors, windows, clerestory windows and other frames, wrought framed and fixed in position with hold fast lugs or with dash fasteners of required dia & length (hold fast lugs or dash fastener shall be paid for separately). 3.1.1 Kiln seasoned and chemically treated hollock wood 1.5 cum 83378.05 125067.00 3.2 Providing and fixing glazed shutters for doors, windows and clerestory windows using 4 mm thick float glass panes, (weight not less than 10 kg per sqm) fixing with ISI marked M.S. pressed butt hinges bright finished of required size with necessary screws. 3.2.1 Kiln seasoned and chemically treated hollock wood 3.2.1.1 30 mm thick 2 sqm 3305.20 6610.00 3.3 Providing and fixing ISI marked oxidised M.S. sliding door bolts with nuts and screws etc. complete : (copper oxidized as per IS: 1378) 3.3.1 300x16 mm 5 each 216.55 1083.00 3.3.2 250x16 mm 10 each 193.70 1937.00 3.4 Providing and fixing ISI marked oxidised M.S. tower bolt black finish, (Barrel type) with necessary screws etc. complete : (copper oxidized as per IS: 1378) 3.4.1 200x10 mm 20 each 69.40 1388.00 3.4.2 150x10 mm 40 each 59.45 2378.00 3.5 Providing and fixing ISI marked oxidised M.S. handles conforming to IS:4992 with necessary screws etc. complete : (copper oxidized as per IS: 1378) 3.5.1 100 mm 25 each 32.55 814.00 3.6 Providing and fixing aluminium hanging floor door stopper, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour and shade, with necessary screws etc. complete. 3.6.1 Twin rubber stopper 2 each 72.35 145.00 3.7 Providing and fixing wooden moulded corner beading of triangular shape to the junction of panelling etc. with iron screws, plugs and priming coat on unexposed surface etc. complete 2nd class teak wood. 3.7.1 50x50 mm (base and height) 20 metre 354.35 7087.00 3.8 Providing and fixing plain lining with necessary screws/nuts & bolts/ nails, including a coat of approved primer on one face, and fixed on wooden /steel frame work, complete as per direction of Engineer-in- charge (Frame work shall be paid for separately). 3.8.1 12mm thick commercial ply conforming to IS : 1328 BWR type 190 sqm 1224.65 232684.00 Sub-Total 379193.00 4 STEEL WORK 4.1 Structural steel work riveted, bolted or welded in built up sections, trusses and framed work, including cutting, hoisting, fixing in position and applying a priming coat of approved steel primer all complete. 410 kg 133.70 54817.00 4.2 Providing and fixing stainless steel ( Grade 304) railing made of Hollow tubes, channels, plates etc., including welding, grinding, bufing, polishing and making curvature (wherever required) and fitting the same with necessary stainless steel nuts and bolts complete, i/c fixing the railing with necessary accessories & stainless steel dash fasteners , stainless steel bolts etc., of required size, on the top of the floor or the side of waist slab with suitable arrangement as per approval of Engineer-in-charge, (for payment purpose only weight of stainless steel members shall be considered excluding fixing accessories such as nuts, bolts, fasteners etc.). 5 FLOORING 5.1 Kota stone slab flooring over 20 mm (average) thick base laid over and jointed with grey cement slurry mixed with pigment to match the shade of the slab, including rubbing and polishing complete with base of cement mortar 1 : 4 (1 cement : 4 coarse sand) : 5.1.1 25 mm thick 190 sqm 1948.25 370168.00 5.2 Kota stone slabs 20 mm thick in risers of steps, skirting, dado and pillars laid on 12 mm (average) thick cement mortar 1:3 (1 cement: 3 coarse sand) and jointed with grey cement slurry mixed with pigment to match the shade of the slabs, including rubbing and polishing complete. 8 sqm 2354.70 18838.00 5.3 Providing and laying Ceramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer) of 1st quality conforming to IS : 15622 of approved make in colours such as White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand), Jointing with grey cement slurry @ 3.3 kg/sqm including pointing the joints with white cement and matching pigment etc., complete. 12 sqm 1096.55 13159.00 5.4 Providing and laying flamed finish Granite stone flooring in required design and patterns, in linear as well as curvilinear portions of the building all complete as per the architectural drawings with 18 mm thick stone slab over 20 mm (average) thick base of cement mortar 1:4 (1 cement : 4 coarse sand) laid and jointed with cement slurry and pointing with white cement slurry admixed with pigment of matching shade including rubbing, curing and polishing etc. all complete as specified and as directed by the Engineer-inCharge : 5.4.1 Flamed finish granite stone slab Jet Black, Cherry Red, Elite Brown, Cat Eye or equivalent. 52 sqm 3186.70 165708.00 Sub-Total 567873.00 6 ROOFING 6.1 Providing and fixing on wall face unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion, (i) Single socketed pipes. 6.1.1 110 mm diameter 10 metre 377.40 3774.00 6.2 Providing and fixing on wall face unplasticised - PVC moulded fittings/ accessories for unplasticised Rigid PVC rain water pipes conforming to IS : 13592 Type A, including jointing with seal ring conforming to IS : 5382, leaving 10 mm gap for thermal expansion. 6.2.1 Single tee with door 6.2.1.1 110x110x110 mm 2 each 234.15 468.00 6.2.2 Single tee without door 6.2.2.1 110x110x110 mm 2 each 221.35 443.00 6.2.3 Bend 87.5° 6.2.3.1 110 mm bend 1 each 150.35 150.00 6.2.4 Shoe (Plain) 6.2.4.1 110 mm Shoe 1 each 131.85 132.00 Sub-Total 4967.00 7 FINISHING 7.1 12 mm cement plaster of mix : 7.1.1 1:6 (1 cement: 6 coarse sand) 65 sqm 343.65 22337.00 7.2 15 mm cement plaster on rough side of single or half brick wall of mix: 7.2.1 1:6 (1 cement: 6 coarse sand) 45 sqm 395.35 17791.00 7.3 Finishing walls with Acrylic Smooth exterior paint of required shade . 7.3.1 New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm 1650 sqm 160.60 264990.00 7.4 Painting with synthetic enamel paint of approved brand and manufacture to give an even shade : 7.4.1 Two or more coats on new work 190 sqm 155.90 29621.00 7.5 Providing and applying white cement based putty of average thickness 1 mm, of approved brand and manufacturer, over the plastered wall surface to prepare the surface even and smooth complete. 450 sqm 156.05 70223.00 7.6 Wall painting with acrylic emulsion paint, having VOC (Volatile Organic Compound ) content less than 50 grams/ litre, of approved brand and manufacture, including applying additional coats wherever required, to achieve even shade and colour. 7.6.1 Two coats 3300 sqm 137.45 453585.00 7.7 Applying priming coats with primer of approved brand and manufacture, having low VOC (Volatile Organic Compound) content. 7.7.1 With ready mixed pink or grey primer on wood work (hard and soft wood) having VOC content less than 60 grams/ litre 190 sqm 70.35 13367.00 7.8 Painting with synthetic enamel paint of approved brand and manufacture of required colour to give an even shade : 7.8.1 One or more coats on old work 450 sqm 102.80 46260.00 Sub-Total 918174.00 8 REPAIRS TO BUILDING 8.1 Renewing glass panes, with wooden fillets wherever necessary: 8.1.1 Float glass panes of nominal thickness 4 mm (weight not less than 10kg/sqm) 12 sqm 1580.90 18971.00 8.2 Providing and fixing double scaffolding system (cup lock type) on the exterior side, up to seven story height made with 40 mm dia M.S. tube 1.5 m centre to centre, horizontal & vertical tubes joining with cup & lock system with M.S. tubes, M.S. tube challies, M.S. clamps and M.S. staircase system in the scaffolding for working platform etc. and maintaining it in a serviceable condition for the required duration as approved and removing it there after. The scaffolding system shall be stiffened with bracings, runners, connection with the building etc wherever required for inspection of work at required locations with essential safety features for the workmen etc. complete as per directions and approval of Engineer-in-charge. The elevational area of the scaffolding shall be measured for payment purpose. The payment will be made once irrespective of duration of scaffolding. Note: - This item to be used for maintenance work judicially, necessary deduction for scaffolding in the existing item to be done. 50 sqm 338.25 16913.00 8.3 Taking out existing wooden door shutter, repair by cutting, painting etc. and refixing of repaired door shutters to existing door frames, including replacement of hinges with screws, etc. as required, all complete as per the direction of the Engineer-in-charge. 12 each 429.10 5149.00 Sub-Total 41033.00 9 Dismantling and Demolishing 9.1 Demolishing cement concrete manually/ by mechanical means including disposal of material within 50 metres lead as per direction of Engineer - in - charge. 9.1.1 Nominal concrete 1:3:6 or richer mix (i/c equivalent design mix) 1 cum 2434.25 2434.00 9.2 Dismantling tile work in floors and roofs laid in cement mortar including stacking material within 50 metres lead. 9.2.1 For thickness of tiles 10 mm to 25 mm 10 sqm 73.40 734.00 9.3 Dismantling old plaster or skirting raking out joints and cleaning the surface for plaster including disposal of rubbish to the dumping ground within 50 metres lead. 110 sqm 54.65 6012.00 Sub-Total 9180.00 10 SANITARY INSTALLATIONS 10.1 Providing and fixing white vitreous china pedestal type water closet(European type W.C. pan) with seat and lid, 10 litre low level white P.V.C. flushing cistern, including flush pipe, with manually controlled device (handle lever), conforming to IS : 7231, with all fittings and fixtures complete, including cutting and making good the walls and floors wherever required : 10.1.1 W.C. pan with ISI marked white solid plastic seat and lid 10.2 Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: 10.2.1 White Vitreous China Flat back wash basin size 550x400 mm with single 15 mm C.P. brass pillar tap 1 each 1879.20 1879.00 10.3 Providing and fixing P.V.C. low level flushing cistern with manually controlled device (handle lever) conforming to IS : 7231, with all fittings and fixtures complete. 10.3.1 10 litre capacity - White 1 each 1190.65 1191.00 10.4 Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. 10.4.1 Flexible pipe 10.4.1.1 32 mm dia 4 each 119.55 478.00 10.5 Providing and fixing mirror of superior glass (of approved quality) and of required shape and size with plastic moulded frame of approved make and shade with 6 mm thick hard board backing : 10.5.1 Circular shape 450 mm dia 2 each 1479.05 2958.00 10.6 Providing and fixing toilet paper holder: 10.6.1 C.P. brass 1 each 803.70 804.00 Sub-Total 13826.00 11 WATER SUPPLY 11.1 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, including fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and testing of joints complete as per direction of Engineer in Charge. Internal work - Exposed on wall 11.1.1 20 mm nominal dia Pipes 10 metre 335.00 3350.00 11.2 Providing and fixing Chlorinated Polyvinyl Chloride (CPVC) pipes, having thermal stability for hot & cold water supply, including all CPVC plain & brass threaded fittings, i/c fixing the pipe with clamps at 1.00 m spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement and the cost of cutting chases and making good the same including testing of joints complete as per direction of Engineer in Charge. Concealed work, including cutting chases and making good the walls etc. 11.2.1 20 mm nominal dia Pipes 10 metre 537.60 5376.00 11.3 Providing and fixing uplasticised PVC connection pipe with brass unions : 11.3.1 45 cm length 11.3.1.1 15 mm nominal bore 5 each 97.75 489.00 11.4 Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work) : 11.4.1 20 mm nominal bore 2 each 346.80 694.00 11.4.2 25 mm nominal bore 2 each 439.25 879.00 11.5 Providing and fixing C.P. brass long nose bib cock of approved quality conforming to IS standards and weighing not less than 810 gms. 11.5.1 15 mm nominal bore 2 each 820.70 1641.00 11.6 Providing and fixing C.P. brass long body bib cock of approved quality conforming to IS standards and weighing not less than 690 gms. 11.6.1 15 mm nominal bore 2 each 798.95 1598.00 11.7 Providing and fixing C.P. brass stop cock (concealed) of standard design and of approved make conforming to IS:8931. 11.7.1 15 mm nominal bore 2 each 670.45 1341.00 11.8 Providing and fixing C.P. brass angle valve for basin mixer and geyser points of approved quality conforming to IS:8931 11.8.1 15mm nominal bore 2 each 574.30 1149.00 11.9 Providing and fixing C.P. Brass extension nipple (size 15mmx50mm) of approved make and quality as per direction of Engineer-in-charge. 2 each 74.80 150.00 Sub-Total 16667.00 12 ALUMINIUM WORK 12.1 Providing and fxing aluminium work for doors, windows, ventilators and partitions with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved make conforming to IS: 733 and IS: 1285, fixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing I paneling, C.P. brass / stainless steel screws, all complete as per architectural drawings and the directions of Engineer-in-charge. (Glazing, paneling and dash fasteners to be paid for separately) : 12.1.1 For fixed portion 12.1.1.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) 50 kg 530.90 26545.00 12.1.2 For shutters of doors, windows & ventilators including providing and fixing hinges/ pivots and making provision for fixing of fittings wherever required including the cost of EPDM rubber / neoprene gasket required (Fittings shall be paid for separately) 12.1.2.1 Powder coated aluminium (minimum thickness of powder coating 50 micron) 45 kg 634.45 28550.00 12.2 Providing and fixing glazing in aluminium door, window, ventilator shutters and partitions etc. with EPDM rubber / neoprene gasket etc. complete as per the architectural drawings and the directions of engineer-in-charge . (Cost of aluminium snap beading shall be paid in basic item): 12.2.1 With float glass panes of 5 mm thickness (weight not less than 12.50 kg/sqm) 8 sqm 1505.25 12042.00 Sub-Total 67137.00 13 WATER PROOFING 13.1 Grading roof for water proofing treatment with 13.1.1 Cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size) 1 cum 8042.30 8042.00
