|
| 1 | Easing of door shutters for easy closing/ opening by tightening of hinges or changing the position of hinges, adjustment of tower bolts, sliding bolts etc with new screws etc complete all as specified and directed. |
| 2 | Easing of window shutters, kitchen cupboard shutters, show case shutters, drawers incl fixing of screws, adjusting handles, knobs, tightening piano hinges incl misc small adjustments complete all as specified and directed. |
| 3 | Fixing only in repair loosed wooden pelmet boxes in position by using plug/wooden gutties embedded in wall, making good in CM (1:3), fixed with suitable MS holder clips complete incl tightening of screws etc in all respect length of each pelmet n exc 2.5m complete all as specified and directed. |
| 4 | S&F, in repair 25 mm dia curtain rod of mild steel chromium plated, with fixing brackets stops rollers etc complete all as specified. |
| 5 | S&F, in repair MS chromium plated bracket holders for curtain rod 25mm dia and fixed with screws to pelmet boxes complete all as specified and directed. |
| 6 | S&F, in repair fancy type mild steel prepainted decorative type rods 20-25mm bore, cut to length as required, of colour as approved complete all as specified and directed. |
| 7 | S&F, in repair mild steel painted brackets with fancy type end knobs suitable for draprery rod of same colour of suitable dia complete all as specified and directed. |
| 8 | S&F, in repair double legged door stopper of aluminium alloy with rubber all as specified and directed. |
| 9 | S&F, in repair aluminium anodized hasp & staple, safety type, with mild steel hinge pin including bolt to hinge plate, fixed with screws, of 100mm size all as specified and directed. |
| 10 | S&F, in repair door closer hydraulically regulated designation No-2 universal type of aluminium body fixed to door frames with screws or by welding complete all as specified and directed. |
| 11 | S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed |
| 12 | S&F, in repair 150mm dia CP Towel Ring complete all as specified and directed. |
| 13 | S&F, in repair corner shelf assembly 300mm consisting of 8mm thick sheet glass with chromium plated bracket guard and railing complete all as specified and directed. |
| 14 | S&F, in repair corner shelf assembly 250mm consisting of 8mm thick sheet glass with chromium plated bracket guard and railing complete all as specified and directed. |
| 15 | S&F, in repairs butt hinges 100mm size, medium weight, mild steelcold rolled, weldedto angle iron or pressed steel chowkat complete all as specified and directed. |
| 16 | S&F, in repair 18/19mm thick prelaminated particle board of exterior grade prelaminated decorative one side and other side balancing white laminated fixed with screws as in cupboard shutters, shelves and pelmet boxes incl 6mm thick teak wood liping allaround complete all as specified and directed. |
| 17 | S&F, in repair 12mm thick prelaminated particle board of exterior grade prelaminated decorative one side and other side balancing white laminated fixed with screws as in cupboard shutters, shelves and pelmet boxes incl 6mm thick teak wood liping allaround complete all as specified and directed. |
| 18 | M&L for repair 12mm thick plywood, commercial quality, BWR grade, type BB, 5 ply, fixed with screws to timber frame work complete all as specified and directed. |
| 19 | S&F, in repair mild steel, cold rolled, medium weight, butt hinge 100mm size fixed with screws to wooden frames complete all as specified and directed. |
| 20 | S&F, in repair mild steel, cold rolled, medium weight, butt hinge 75mm size complete all as specified and directed. |
| 21 | S&F, in repair mild steel helical door spring 300mm long stove enamelled black incl roller and roller plate complete fixed with screws to wooden frames or with welding to steel frames complete all as specified and directed. |
| 22 | S&F, in repair aluminium alloy anodized sliding door bolt with hasp, staples (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy length of bolt 250mm complete all as specified and directed. |
| 23 | S&F, in repair stainless steel wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm and fixed with tinned tacks or galvanized wire staples or wooden beads or with pins in steel window complete all as specified and directed. |
| 24 | S&F, in repair aluminium anodized barrel tower bolts of extruded section, length of bolt 200mm complete all as specified and directed. |
| 25 | S&F, in repair aluminium anodized barrel tower bolts of extruded section, length of bolt 150mm complete all as specified and directed. |
| 26 | S&F, in repair aluminium anodized barrel tower bolts of extruded section, length of bolt 100mm complete all as specified and directed. |
| 27 | S&F, in repair extruded aluminium alloy handles, fabricated type, 150mm size complete all as specified and directed. |
| 28 | S&F, in repair extruded aluminium alloy handles, fabricated type, 125mm size complete all as specified and directed. |
| 29 | S&F, in repair plain fillets of 2nd class hard wood, square, rectangular or triangular section, wrought, secured with nails, sectional area exc 13 Sqcm and n exc 25 Sqcm complete all as specified and directed. |
| 30 | All as per item No. 29 above but sectional area exc 3 Sqcm and n exc 6 Sqcm. |
| 31 | S&F, aluminium sheet 0.56mm thick, bent at edges, fixed to door shutter with nails complete all as specified and directed. |
| 32 | S&F, in repair looking mirror 5.5mm thick well polished of size 600 x 450mm, bevelled edge of selected quality glass mounted on 6mm commerical ply or AC building board with aluminium frame around and fixed to wooden plugs with CP brass screws complete all as specified and directed. |
| 33 | Hacking out old broken glass (any size, quality or description) from wooden or steel frames at any height fixed with beads or putty complete all as specified and directed. |
| 34 | S&F, 3mm thick plain sheet glass ordinary quality and galzing with oil putty or wooden beads in squares,n.exc 0.5Sqm in each pane complete all as specified and directed. |
| 35 | S&F, 3mm thick figured glass pin head type and glazing with oil putty or wooden beads in squares n exc 0.50 Sqm each pane complete all as specified and directed. |
| 36 | M&L for petty repairs to leaking water in bib taps, pillar taps, stop cock, angle valve, PVC connection, waste pipes, float valves, concealed stop cock, GI pipe joints, bottle traps, etc of any description by changing the washers etc or any other minor accessories to make the system functional complete all as specified and directed. |
| 37 | M&L for petty reapirs to high/ low level flusing cistern by adjusting the float valve, syphon, leakage in PVC connection, PVC/ GI bend incl replacing of rubber washer, check nuts, plunges etc for any type of flush complete all as specified and directed. |
| 38 | S&F in repair 15mm dia bib tap cast copper alloy (fancy type), chromium plated, with crutch or butterfly handle, screwed down for iron pipe or for brass ferrule complete all as specified and directed. |
| 39 | S&F in repair 15mm dia brass chromium plated long neck pillar tap, fancy type with or without lettered \"Hot\" or \"Cold\", with long screwed shanks and fly nut, capstan head, screwed for 15mm dia pipe complete all as specified and directed. |
| 40 | S&F in repair chromium plated brass wall mixer 2-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange (without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 41 | S&F in repair chromium plated brass wall mixer 3-in-1 fancy type with provison for both hand shower and overhead shower complete with wall flange without hand & over head Shower screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 42 | S&F in repair chromium plated brass Central hole basin mixer without popup waste system complete screwd down for 15mm GI bore pipe complete all as specifed and directed. |
| 43 | S & F in repairs Stop/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 44 | S&F, in repair 15mm bore PVC stop valves complete all as specified and directed. |
| 45 | S&F, in repair 15mm bore PVC bib taps complete all as specified and directed. |
| 46 | S & F in repairs two way Bib cock/ angle cock 15mm bore cast copper fancy type chromium plated alloy screwed down high pressure with crutch or butter fly handle serwed both ends for iron pipe or for unions complete all as specified and directed. |
| 47 | S&F, in repair PVC cover for Over head water tank of capacity 500 ltr and 1000 ltr complete all as specified & directed. |
| 48 | S&F, in repair 15mm bore brass CP spreader for urinal suitable for 15mm borepipe complete all as specified & directed. |
| 49 | S&F, in repair PVC waste pipe for WHB 32mm dia 1150mm long complete all as specified and directed. |
| 50 | S&F, in repair PVC waste pipe for Sink 40mm dia 1150mm long complete all as specified and directed. |
| 51 | S&F, in repair rubber or PVC door seal 900mm long complete all as specified and directed. |
| 52 | S&F, in repair PVC ball valves high pressure with epoxy coated aluminium rod & high density polyethylene ball screwed for 15mm bore pipes complete all as specified and directed. |
| 53 | All as per item No.52 here in before, but suitable for 20mm bore pipe complete all as specified and directed. |
| 54 | All as per item No 52 here in before, but suitable for 25mm bore pipe complete all as specified and directed. |
| 55 | S&F, in repair PVC connection 15mm size with PTMT nuts at both ends, of length 450mm complete all as specified and directed. |
| 56 | All as per item No.55 above, but of length 600mm complete all as specified and directed. |
| 57 | S&F, in repair 75mm dia chromium plated shower rose, fancy type, fixed to 15mm bore pipe complete all as specified and directed. |
| 58 | S&F in repairs Health Faucet ABS with Rubbit Cleaning System, 1.25 m LongFlexible Tube & ABS Wall Hook complete all as specified and directed. |
| 59 | S&F, in repair waste fitting brass chromium plated 32mm dia for wash hand basin complete all as specified and directed. |
| 60 | All as per item No 59 above but 40mm dia for sinks complete all as specified and directed. |
| 61 | S&F, in repair waste fitting 40mm dia of PTMT suitable for stainless steel kitchen sink complete all as specified and directed. |
| 62 | S&F, in repair 10 LTR capacity PVC low level flushing cistern complete with syphon, handle, lever, float valve and PVC bend incl connecting to ITWC/ ETWC and fixing on wall bracket complete all as specified and directed. |
| 63 | S&F, in repair 125mm/ 100mm dia mild steel chromium plated grating fixed on floor trap/ nahni trap in cement mortar 1:6, complete all as specified and directed. |
| 64 | S&F, in repair vitreous china squatting pan, white, Orissa pattern, size 580 x 440mm with integral foot rests (excluding flushing cistern & flush pipe) with cast iron trap, connected to outgoing pipe and flush pipe, making good floor portion to match with the existing surface of floor complete all as specified and directed. |
| 65 | S&F, in repair vitreous china wash down water closet pan (pedestal pattern), white, excluding flushing cistern & flush pipe incl connection to out going pipe and flush pipe completeall as specified and directed. |
| 66 | S&F, in repair plastic water closet seat with cover, white/ black, closed pattern with flat bottom and cover and mild steel chromium plated or aluminized hinging device complete all as specified and directed. |
| 67 | S&F, in repair vitreous china wash basin, white, flat back, size 550 x 400mm excluding taps, waste, chain & plug and porcelain stopper but incl brackets complete all as specified and directed. |
| 68 | S&F, in repair fitting of galvanized iron medium grade such as socket, elbow, nipple of different sizes, equal or unequal Tee, union, reducer etc for 15mm bore pipe complete all as specified and directed. |
| 69 | S&F, in repair fitting of galvanized iron medium grade such as socket, elbow, nipple of different sizes, equal or unequal Tee, union, reducer etc for 20mm bore pipe complete all as specified and directed. |
| 70 | S&F, in repair fitting of galvanized iron medium grade such as socket, elbow, nipple of different sizes, equal or unequal Tee, union, reducer etc for 25mm bore pipe complete all as specified and directed. |
| 71 | Taking down steel tubing and connections incl removal from site for 15mm bore pipe complete all as specified and directed. |
| 72 | Taking down steel tubing and connections incl removal from site for 20mm bore pipe complete all as specified and directed. |
| 73 | S&F in short lengths 15mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 74 | S&F inshort lengths 20mm bore tubes medium grade galvanized with all fitting and fixed complete to walls and ceilings or laid in floors complete all as specified and directed. |
| 75 | S&F, in repair brass spindles, heavy duty, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed. |
| 76 | M&L for welding in repairs not exc 2.5 cm each with thickness of metal to be welded not exc 6mm, complete all as specified and directed. |
| 77 | S&F, PVC cabinet mirror of size 450 x 300 x 100mm with selected quality glass complete all as specified and directed. |
| 78 | S&F, in repair CP Toilet paper holder complete all as specified and ditrected. |
| 79 | Supply only Integral waterproofing compound (BIS Marked) complete all as specified & directed. |
| 80 | S&F in repair brass chromium plated jet spray with flexible pipe length not less than one metre (min) fixed to EWC suitable for 15mm bore pipe complete all as specified and ditrected. |
| 81 | S&F in repair 20mm dia brass chromium plated tubular towel rails, D type, 60cm long between flanges, complete all as specified and ditrected. |
| 82 | S&F, in repair glass shelf 8mm 60cm long thick including bracket complete all as specified and directed. |
| 83 | S&F in repair WHB brackets cast iron, prepainted of required size complete all as specified and directed. |
| 84 | S&F in repair PVC low level flushing cistern internal kit fitting with syphon, handle, lever, float valve complete all as specified and directed. |
| 85 | Supply and fix in repairs PVC (SWR) pipes 75mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and ditrected. |
| 86 | Supply and fix in repairs PVC (SWR) pipes 110mm bore single socketed in any length with rubber ring joints fix to wall complete all as specified and ditrected. |
| 87 | S&F PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 75mm, complete all as spcified. |
| 88 | S&F in repairs PVC (SWR) Bends (any radius), diminishing pieces or tapers, bore of pipe 110mm, complete all as spcified. |
| 89 | S&F in repairs PVC (SWR) Branch pieces, double (double Y) equal or unequal of pipe 75mm bore complete all as spcified. |
| 90 | S&F PVC in repairs (SWR) Branch pieces, double (double Y) equal or unequal of pipe 110mm bore complete all as spcified. |
| 91 | S&F in repairs PVC floor trap, with grating 75mm including jointing to wast pipe fixed in cement concrete type B1 (1:2:4), in repairs and including waterleak proor treatment complete all as spcified |
| 92 | S&F in repair 15mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 93 | S&F in repair 20mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 94 | S&F in repair 25mm Gun-metal, globe or gate valves, with iron wheel head, screwed both ends for iron pipe and fixed. |
| 95 | S&F in repair sinks with drainage board made of stainless steel 1mm thick kitchen or laboratory with all plugs, washers, fittingsand wastes; including bedding in cement mortar to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 915mm x 460mm bowl size 410mm x 330mm x 160mm, complete all as specifed and directed. |
| 96 | S & F in reparis Stainless Steel Wall Mount Case with Soap Holder & Bruch Holder fixed to wall complete all as specified and ditrected. |
| 97 | M & L for patch work n.exc 2 sqm each patch 15mm thick rendering in CM (1:6) on other than fair faces of brick work finished even and fair without using extra cement complete all as specified and ditrected. |
| 98 | M&L for patch work n.exc 2 sqm each patch PCC 1:2:4 type B-1 using 20mm graded stone aggregate, 50mm thick in flooring complete all as specified and ditrected. |
| 99 | S&F in repairs 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed. |
| 100 | S& F in repairs 100mm size MS mat/ glossy finish handle complete all as specfied and directed. |
| 101 | S&F in repairs modular type stainless steel basketof any shape with side sliding roller clip and sliding rails on both side fixed with steel screws including all fixing arrangement complete all as specified and directed. |
| 102 | S&F in repair heavy duty wall mixer legs, brass elbow, brass socket, short pices, for pillar cock, CP stop cock, CP bib cock, concealed stop cock, wall mixer, sink mixer in any size etc complete all as specified and directed. |
| 103 | S&F, in repair looking mirror 5.5 mm thick well polished of size 600 x 900mm, bevelled edge of selected quality glass CP brass screws complete all as specified and ditrected. |
| 104 | S&F in repair of steel spring for rolling shutters and removing of worm out components such as hood cover, laths, ball bearings, helical wire spring lock, shaft pipe, straightening of existing laths at required places including greasing and refixing in the same location complete all as specified and ditrected. |
| 105 | Taking down chowkats of any description without taking of shutter from the frame exceeding 1.5 sqm but not exc. 4.0 sqm each complete all as specified and ditrected. |
| 106 | Taking down chowkats or frame of any description n.exc. 1.5 Sqm each (without taking off shutters from the frames) & remove off the premises complete all as specified and directed. |
| 107 | Taking down Shutters of any description exc. 1 sqm but n. exc 2 sqm each of any description complete all as specified and directed. |
| 108 | S&F 35mm thick second class hardwood Plain, framed, panelled shutters (any number of panels), with panels of timber flat on both sides (feather edged), or of veneered particle board medium density, wood particle board with commercial face veneers, moulded on solid (for each side) : supplied and fitted to chowkat complete all as specified and ditrected. |
| 109 | S&F 35mm thick Flush shutters, solid core construction, with block board core & plywood face panels, commercial type on both sides complete all as specified and directed. |
| 110 | S&F 30mm thick 2nd class hard wood glazed and skeleton shutters open rebated and prepared to receive glass gauge etc with cut and mitred beads for securing glass etc size of member of shutter as specified in SSR Pt-1 section 8 and clause 8.24 (a) |
| 111 | S&F Pressed steel door frame for single door, size 105 x 60mm with one rebates incl necessary fixing lugs, hinges, lock strike plate, holdfast (size 25mm x 3mm) of length 30 cm) etc. making good holes and distrub area in cement mortar (1:3) complete all as specified and as directed. |
| 112 | S&F Pressed steel door frame for single door, size 165 x 60mm with double rebates incl necessary fixing lugs, hinges, lock strike plate, holdfasts (size 25mm x 3mm) of length 30 cm) etc, making good holes and distrub area in cement mortar (1:3) complete all as specified and as directed. |
| 113 | M&L for PCC 1:2:4 type B0 (12.5mm graded) aggregate for filling in pressed steel door framed complete all as specified and ditrected. |
| 114 | S&F Solid PVC Door Frame of size 50mm x 47mm made out of 5mm prelam PVC sheet used instead of plain colour PVC sheet and edges will be painted to match with reinforced with M.S. Square tube, suppling & fixing in opening as per specification & drawing with prelam sheet all as on drawing on Sl page No.178 of SSR Part-II, complete all as specified and ditrected. |
| 115 | S&F solid PVC door frame of size 50mm x 47mm made out of 5mm plain colour PVC sheet reinforced with MS sqare tube, complete all as specified and directed. |
| 116 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded plain colour PVC ‘C’ channel having a PVC sheet strip of 20mm width stuck inside with solvent cement for stiles and plain colour PVC sheets for top rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 117 | S&F Factory made solid panel pvc door shutter 30mm thick (style) consisting of frame made out of M.S. tubes for top & bottom rails. M.S. frame shall be covered with heat moulded both side Prelam PVC sheet used instead of plain colour PVC sheet with solvent cement for stiles andtop rail, lock rail & bottom rail on either side & as gap insert for top rail & bottom rail; Panelling of plain colour Prelam PVC sheet to be fitted in the M.S. frame welded/ sealed to the stiles & rails with suitable Prelam PVC sheet beading, and joined together with solvent cement, suppling & fixing in the frame at site as per specification & drawing |
| 118 | S&F 150mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 119 | S&F 125mm size aluminium, anodised barrel tower bolt of extruded section complete all as specified and directed. |
| 120 | S&F 300mm length, aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type) and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast aluminium alloy complete all as specified and directed. |
| 121 | S&F 100mm size, butt hinges, medium weight, cold rolled mild steel complete all as specified and directed. |
| 122 | S&F 150mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 123 | S&F 100mm size extruded aluminium alloy handles, fabricated type complete all as specified and directed. |
| 124 | Demolition of cement concrete (un-reinforced) of any description and in any position not otherwise specifically provided for complete all as specified and directed. |
| 125 | Dismantling floor, hearth or wall tiling including cement mortar bedding (but not backing), removing debrish and rubbish off the premises and stacking serviceable tiles complete all as specified and ditrected. |
| 126 | M&L for Vitrified Ceramic tiles 10mm thick light shade (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and ditrected. |
| 127 | M & L for 25mm thick plain cement concrete 1: 2: 4type B-0 using 12.5mm graded stone aggregate as in base floor or maintain to even surface complete all as specified and directed. |
| 128 | All as per item No.122 but on verticalsurfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 129 | M&L for non skid ceramic coloured tiles 7 to 8mm thick (square/ rectangular) area of each tile exceeding 0.11 sqm but not exceeding 0.18 sqm in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match including 15mm thick screed bed in CM 1:6 complete all as specified and ditrected. |
| 130 | All as per item No.124 but on verticalsurfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 131 | M&L for glazed coloured ceramic tiles, first quality (or approved class, colour and design/ shade) of300 x 450 x 7mm thick in vertical surfaces, as in dado/ skirting etc set & jointed in neat cement slurry & pointed in coloured cement to match with coloured tiles, over and including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 132 | Demolition of stone slabs of any description or thickness in floors/ walls laid bedded and pointed in any mortar etc. complete removal of debris outside MD land complete all as specified and ditrected. |
| 133 | M&L for 300 x 300 x 10mm thick heavy duty (ENDURA) ceramic floor tile laid in floor etc set and jointed in neat cement slurry and pointed in white or coloured cement to match fixed over and including 20mm thick screed bed in CM 1:6 complete all as specified and directed. |
| 134 | M&L for 16 to 18mm thick Granite (of any type) work (table rubbed and polished and exposed visible edge moulding/ rounding) in steps, jambs, pillars, window cills, cooking platforms urinal partition and like in 15mm thick cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite complete all as specified and ditrected. |
| 135 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement screed base laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing ompleteincluding 15mm thick screed bed in CM 1:6 complete all as specified and ditrected. |
| 136 | All as per item No.130 but on vertical surfaces such as skirting incl including 10mm thick rendering in cement mortar 1:4 rough finish to receive the tiles complete all as specified and directed. |
| 137 | Mirror poishing of old kota stone complete all as specified and directed. |
| 138 | Taking down cement or cement lime plaster of any description including racking out joints, hacking for keys, scrubbing down with water etc, complete all as specified and directed. |
| 139 | M&L for Rendering 15mm thick on fair faces of concrete/ brick interior surfaces in cement mortar 1:6 as per manufacturer\"s instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 140 | M&L for preparation of new surfaces of plastered of walls and applying Two coat of distemper oil emulsion incl priming the surface and incl one coat of wall putty complete all as specified and ditrected. |
| 141 | M&L for Rendering 10mm thick on fair faces of concrete surface of ceiling, chajja in CM 1:3, surface finished even and surface without using extra cement complete all as specified and as directed. |
| 142 | M&L for Preparation of Newly plastered surfaceand applying three coats of white wash on Ceiling complete all as specified and as directed. |
| 143 | M&L for Rendering 15mm thick on fair faces of concrete/brick exterior surfaces in cement mortar 1:4 mixed with water proofing compound as per manufacturer\"s instruction, finished fair and even without using extra cement complete all as specified and directed. |
| 144 | M & L for Prepration of new surfaces and applyingtwo coats exterior weather coatover one coat of exterior primer over and including 2mm thick wall putty etc complete all as specified and directed. |
| 145 | Complete removal of existing treatment on wall/roof projections including facia, cornices etc by scrapping with mechanical sander (having mechnical vaccum mechanism) with sanding pad of appropriate grit to make surface clean, free, from dust, loose paint etc by skilled labour complete all as specified and directed. (at any height of bldg and rate of Scaffolding will be included in the quoted rates) |
| 146 | M&L for providing and applying minimum 1mm thick wall care putty over prepared surface to achive the surface even and smooth for painting. (Any Height of Bldg) |
| 147 | M&L for applying Two coats of 100% Premium acrylic emulsion paint having VOC less than 50 gm/litre and UV resistance as per IS 15489:2004, Alkali & fungal resistance, dirt resistance exterior paint of equired shade (Company Depot Tinted) with silicon additives @ 1.43 litre/ 10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/ 10 sqm on old surface of wall including preparition of surface, complete all as specified and directed.Note:- primer and emulsion to be carried out through air less spray machine (Mechanical means). |
| 148 | M&L for preparation of surfaces and applying one coat of Acrylic emulsion with roller on old treated surfaces of wall etc completeall as specified and directed.(Note:- Contractor shall furnished guarantee of four years against service rendered). (Note- primer and emulsion paint shall be carried out through air less spray machine (Mechanical means) at any height of bldg and rate of Scaffolding will be included in the quoted rates. |
| 149 | M&L for preparation of surfaces and applying two coat of Acrylic emulsion with roller on old treated surfaces of wall etc complete all as specified and directed. (Note:- Contractor shall furnished guarantee of four years against service rendered). (Note- primer and emulsion paint shall be carried out through air less spray machine (Mechanical means) at any height of bldg and rate of Scaffolding will be included in the quoted rates. |
| 150 | M&L for preparation of old plaster surfaces of ceiling and applying one coat of white wash complete all as specified and ditrected. |
| 151 | M&L for applying one coat of synthetic enamel paint on wooden surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and ditrected. |
| 152 | M&L for applying one coat of synthetic enamel paint on steel & iron surfaces of any description, not otherwise, described, over 10cm width or girth including preparation of old painted surface complete all as specified and ditrected. |
| 153 | M&L for Preparation of Old painted plastered surfaces and applying one Coats of cement base paint on Walls complete all as specified and directed. |
| 154 | M&L for Preparation of Old painted plastered surfaces and applying Two Coats of cement base paint on Walls complete all as specified and directed. |
| 155 | S&F rotational moulded polyethylene water storage tanks of capacity 1000 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fitting such as nipple, shochet etc including dismantling old PVC tank complete all as specified and directed in SSR Part I. |
| 156 | S&F rotational moulded polyethylene water storage tanks of capacity 500 litres (cylindrical vertical with closed top) hoisted and fixed in position including all fitting such as nipple, shochet etc including dismantling old PVC tank complete all as specified and directed in SSR Part I. |
| 157 | Disconnecting existing tanks (exc 500 but n. exc 1000 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains. The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes, etc. and hoisting if required reconnecting and re-fixing in the same positiondate of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning. Note:- (i) cleaning shall be the responsibility of the contractor for the inter period of contract. (ii) 50% of quoted amount shall be deducted form the executeed quantities if not cleaned to the tank. |
| 158 | Disconnecting existing tanks (exc 250 but n. exc 500 ltrs capacity), setting aside (or lowering if required) for Cleaning and removing all scale and dirt, etc, from tanks. The complete tank be scrub to remove dirt, sediments, fungus & stains. The vacuumed tank is disinfected with anti-bacterial spray or liquid bleach. Tank is filled with water that is made to run through the taps to disinfect the water pipes, etc. and hoisting if required reconnecting and re-fixing in the same position incl writing the date of cleaning should be write by erasing the previous date of cleaning with paint and further writing the current date of cleaning.Note:- (i) cleaning shall be the responsibility of the contractor for the inter period of contract. (ii) 50% of quoted amount shall be deducted form the executeed quantities if not cleaned to the tank. |
| 159 | S&F powder coating anodised aluminium ventilator, half portion of the ventilator covered with 5.5mm thick frosted glasses and half portion fittted with frosted louvers and outer side fitted with mosquito proof galvanised wiremess including removing old steel ventilators incl finishes the demolition surfaces with rendering 10-15mm thick CM 1:4 of fair finshes including filling the holdfast holes with PCC 1:2:4 (12.5mm graded aggregate) including 02 coat of cement based paints with primer incl all fittings, accessories etc complete all as specified and ditrected. |
| 160 | S & F of Powder coated aluminum threetrack sliding shutters two Glazed shutters and one guazed shutters(with wire mesh), each shutter width one half of the length of window with the following specifications and making good the adjacent surfaces.(i) Three way track for sliding shutters of cross section 91.80mm x 31.75mm x 1.30mm thick.(ii) Sliding shutter frame of cross section 40 x 18 x 1.30mm.(iii) Aluminium glazing strip of size 18.2 x 16.66mm.(iv) 4 to 5mm thick float glass superior quality make Modi float for two shutters.(v) IDPE rubber gasket for fixing glass.(vi) Locking cleat per shutter - 01 No.(vii) Two nos sliding rollers per shutter.(viii) Rubber shock absorber - 03 No per shutter.(ix) Aluminium wire cloth 0.36mm nominal dia of wire and average width of aperture 1.40mm for one shutter.(x) Fixing screws for frame with wall - 06 No per window. |
| 161 | Dismantling wrought iron or mild steel work of any description etc. |
| 162 | S&F Framed work such as grills, gratings etc., with ends of bars shouldered and/ or riveted, or forget into spikes; framed guard bars; barred iron doors; ladders; framed balusters; walk ways; railings; framework of water tanks and similar work conforming to Fe 410-0 or Fe 310-0 |
| 163 | S&F rolled sections as in posts, main and cross beam, hip and jack rafters, purlins, where connected to common rafters (beam, tee, angle, channel pipes, tubes, plates and flat sections etc) including distances pieces, cleats etc cuttinghalf brick thick wall and fixing with cement mortar complete all as speified and directed of grade FE-410, (gde-E-250) quality. |
| 164 | M&L for preparation of new steel surfaces of any description ,over 10 cm width or girth and applying two coats of synthetic enamelled paint over a coat of red oxide primer complete all as specified and directed. |
| 165 | Dismantling Asbestos cement (corrugated, semicorrugated, etc.) sheets in roof coverings including Nainital or similar pattern Roof covering. |
| 166 | S&F for Pre- painted galvatume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of an colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and ditrected. |
| 167 | Dismantling/ wall and ceiling boards (fibre pulp, insulation etc) or insulation boards/ slabs complete all as specified and ditrected. |
| 168 | Providing and fixing in true horizontal level 600mm x 600mm, false ceiling system hot dipped galvanised steel section, exposed surface with pre-coated capping, main tee of size 24 x 38mm, having 0.25mm gauge at every 1200mm centre to centre maximum and rotary stitched cross tee of size 24 x 38mm having 0.25 mm gauge at every 600mm c/c and sub cross tee of size 24 x 38mm, having 0.25mm gauge at 1200mm c/c and wall angle of size 19 x 19mm, having 0.35mm gauge fixed to the periphery of the wall. The abovegrid is suspended at every 1200mm c/c in both directions using 3.0mmthick pre-straightened GI wire.laying 595 x 595 x 6mm thick E-Board Designer ceiling fixing 600mm x 60mm x 6mm grid (Frame work) etc complete all as specified and ditrected. |
| 169 | S&F in repairs 18mm thick factory made PVC sheet one side pre-laminated sheet ktichen cabinet shutter. The 18mm thick sheet shutter bent at 90 degree and finish all edges at level for marking edge lipping bending for 0.5mm thick PVC sheet lipping at all four edges using bonding tape etc complete all as per specified and directed by Engr-in-Charge manufactures specification |
| 170 | S & F in repairs factory made PVC shelf/partition of required size consisting of panel of 18mm thick required size consisting of panel of 18mm thick celuka PVC ply and for supporting the hold of shelf/ partition and shall provided 3 edges in size 18mm x 18mm as per required lenght the front side of the edge visible in the front of the shelf/ partition to be edge lipped by 18mm widht x 1mm thick PVC sheet of density 600 kg/cum manufactured by ISO 9001-2015 Certified Company, using solvent cement etc complete all as specified and ditrected. |
| 171 | S&F stainless steel shelf closing hinges 75mm size for PVC door shutters complete all as specified and directed. |
| 172 | S&F 50 x 15mm size magnet door catcher for closing for PVC door shutter complete all as specifid and directed. |
| 173 | S& F 100mm size MS mat/glossy finish handle complete all as specfied and directed. |
| 174 | Taking down existing waterproofing treatment of tar felt of any description from roof surfaces and removing rubbilsh to a distance not exc 100mtres complete all as specified and directed. |
| 175 | M&L for 10mm thick screed bed on concrete surfaces in CM(1:3) finished even and smooth without using extra cement complete. |
| 176 | M&L for PCC 25mm thick (1:2:4) type Bo using 12mm graded stone aggregates mixed with integral waterproofing chemical mixed in proportion of 200ML/50Kg cemet of in proportion 200ML/50Kg cement as in padding on roof surfaces for correcting/ making proper slope on roof/ chhaja and roof kerbs/ benching complete all as specified and directed. |
| 177 | M&L for water proofing treatment on non approachable/ non accessible roof surfaces (Horizontal /vertical)in following sequences through manufacturer/ authorised applicator of the manufacturer complete all as specified and directed complete. (a)Properly cleaning and drying cement surfaces. (b)Applying one coat of oxidized bitumen based solvent primer @ 0.3Kg/sqm. (c )Laying 3mm thick APP modified water proofing membrane with 100mm over laps sealed & bonded to the surface by torchon method. (d)Applying two coats of bituminous aluminium paint @ 200 gram/ sqm (minimum) necessary testing for leak proof/ waterproof & 10 year gaurentee alongwith Security Deposit there of |
