|
| 1 | Oiling greasing of hoisting gear boxes (for rope drum and chain hoist) of regulator gates of canal/rivers by cleaning, checking, greasing /lubricating the gears, plummer bocks, bearings, manual drive etc including all charges of man & materials which include oiling, greasing, refilling of gear oil excluding supply of gear oil and grease and fixing of damaged oil seals & missing nut & bolts etc complete as per direction of EIC. ( Gear oil & Grease provided extra.) |
| 2 | Servicing & maintenance of winch M/C i.e. cleaning the gears, plummer block including bearings , rope drum etcwith the help of Kerosine, jute, cloth, sand paper, emery paper etc, application of grease, mobil oil in the bearings of plummer block for proper lubricating and supply and fitting, fixing of damaged oil seals & missing Nut & Bolts etc. to complete the job at site as per direction of Engineer in charge. |
| 3 | Scraping, cleaning of wire rope, rope drum, pulley and lubricating the wire rope with rope compound servo coat-140 or approved wire rope compound including setting the wire rope in proper alignment and position as necessary as per direction of EIC. The Costincludes cost of manpower employed, scaffolding charges, cost of kerosine, jute, wire brush, cloth, wire rope compound & all other incidental charges to complete the job in all respect.18 mm dia |
| 4 | Supply of Gear Oil as per direction of Engineer in charge |
| 5 | Supply of Grease |
| 6 | Fabrication, Supply, erection and commissioning of consisting of skin plate, vertical and horizental girder, columns, joist etc made of MS material consisting of angle, channel, beam, plate, flat etc conforming to IS : 2062 - 2011/latest revision manufactured as per approved drawing and direction including cost of Materials, Machineries, Manpower, Cutting, Aligning, drilling, Welding, Finishing, Consumables, Carriage and all overheads with all leads and lifts complete as per specification (without painting). |
| 7 | Supplying, fitting & fixing Zn-Al alloy (55% Al & 45% Zn)coating of 150 grams per sq. metre (followed by colourcoated on both side) steel sheet work having minimum yield strength of 550 Mpa of trapizoidal profile of approved make (excluding the supporting frame work) fitted and fixed with 55 mm & 25 mm self tapping screw, EPDM Washer 16 mm dia & 3 mm th. washer etc. complete with 150 mm end lap and one corrugation minimum side lap. (Payment to be made on area of finished work). In Roof:- With 0.5 mm thick sheet. |
| 8 | Surface cleaning of metal surfaces by chemical cleaners and then by hand with emary paper, wire brush and power tool cleaners and removing dust and preparation of surface including cost of all materials, labour, machinery, scaffolding, etc., complete with initial lead for sand upto 1 km and all lifts. |
| 9 | Painting hoist structural components, tressle bridge ,crane, lifting beam, cat work bridge and other similar structure on prepared surfaces with two coats of zinc phosphate primer (airless spray preferred) 40 microns/coat and followed by two coats of synthetic enamel paint 25 microns/coatincluding cost of all materials, labour, scaffolding etc., complete with all leads and all lifts. |
