Sales : +91-777 804 8217
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 24-06-2025 | Corrigendum III | Date | 02-07-2025 |
| 2 | 10-06-2025 | Corrigendum II | Date | 23-06-2025 |
| 3 | 02-06-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 09-06-2025 |
| Sl. No. | Item Description |
| 1 | 1EARTHWORKSClearing grass & removal of rubbish upto a distance of 50 m outside the periphery of the area |
| 2 | Felling trees of girth (measured at a height of 1.0m above ground level) including cutting of trunks & branches, removing the roots & staking of serviceable material & disposal of unserviceable material for all leadsa) Beyond 30cm & upto 60cm girth |
| 3 | Felling trees of girth (measured at a height of 1.0m above ground level) including cutting of trunks & branches, removing the roots & staking of serviceable material & disposal of unserviceable material for all leadsb) Beyond 60cm & upto 120cm girth |
| 4 | Earthwork in excavation over areas (exceeding 30cms in depth, 1.50m in width as well as 10sqmts on plan) in all types of stratas comprising of any type of materials such as soil, silt clay, sand, gravel, murrum of all types of conglomerates, laterite rock, soft rock, ordinary rock, disintegrated rock, fissured / shattered rock, decomposed rocks, weathered rock, etc and all such other materials either in full or part as the case may be adopting any method / methods as may be convenient or permitted including chiseling, wedging etc. in all conditions such as dry, moist, foul, saturated, submerged etc as directed by Engineer etc. all complete including refilling, dressing of sides, ramming of bottom, including all lead and lift, including getting out the excavated soil as directed including pumping and bailing out water, barricading danger, lightening, guarding as directed by Engineer upto depth of 1.5m (Blasting Prohibited). |
| 5 | Earthwork in excavation in foundation, pipeline trenches, drain (not exceeding 1.5m in width or 10 sq.m. on plan) in all types of stratas comprising of any type of materials such as soil, silt clay, sand, gravel, murrum of all types of conglomerates, laterite rock, soft rock, ordinary rock, disintegrated rock, fissured / shattered rock, decomposed rocks, weathered rock, etc and all such other materials either in full or part as the case may be adopting any method / methods as may be convenient or permitted including chiseling, wedging etc. in all conditions such as dry, moist, foul, saturated, submerged etc. as directed by Engineer etc. all complete including refilling, dressing of sides, ramming of bottom, including all lead and lift, including getting out the excavated soil as directed including pumping and bailing out water, barricading danger, lightening, guarding as directed by Engineer upto depth of 1.5m (Blasting Prohibited). |
| 6 | Refilling the pipeline/foundation trenches, plinth sides, foundation, etc. with available excavated earth in layers not exceeding 20cm in depth consolidating each layer by ramming & watering lead upto 50m & all lifts & disposal of surplus earth as directed by Engineer in charge |
| 7 | Supplying & filling in plinth under floors, trenches including watering, ramming, consolidating & dressing completeb) Moorum |
| 8 | Spreading the earth/hard soil in layers not exceeding 250 mm in depth breaking clods, watering rolling each layer with half ton roller or wooden or steel hammers & rolling every third & topmost layer with power roller of minimum 8 tonne & dressing up in embankment for roads, flood banks, marginal & guide banks & filling up of ground dressing etc. complete |
| 9 | 2 MASONRY WORKSProviding & laying rubble packing with hard laterite stone under floors including watering ramming & consolidating etc. in pipeline trenches & other foundations complete |
| 10 | Providing & constructing Laterite masonry in neatly dressed stones of size as specified in cement mortar 1: 4 (1 cement : 4 coarse sand) in foundation & basement |
| 11 | Providing & constructing Half brick masonry using fly ash bricks in cement mortar 1:4 (1 cement : 4 coarse sand) with bricks of class designation 40kg/cm2b) Above plinth upto floor V level 200 x 95 x 95 |
| 12 | Providing & constructing Half brick masonry in cement mortar 1:4 (1 cement : 4 coarse, sand) with bricks of class designation 40 kg/ sq. cm upto floor five levelb) Upto floor V level |
| 13 | 3 PLAIN AND REINFORCED CONCRETE WORKS Providing & laying cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded granitic or basaltic stone aggrt. 20 mm. nominal size) excluding cost of centering, shuttering & finishing in: a) All works upto plinth level |
| 14 | Providing & laying upto floor five level cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement : 3 fine sand) including centering & shuttering etc. b) String courses, copings, bed plates, anchor blocks, plain window sills & the like |
| 15 | Providing & laying upto floor five level cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded granitic or basaltic stone aggregate 20 mm nominal size) including smooth finishing to exposed surfaces, with cement mortar 1:3 (1 cement : 3 fine sand) including centering & shuttering etc.c) Small lintels not exceeding 1.5 m clear span including coping & the like requiring formwork to the suspended portions |
| 16 | Providing & laying damp proof course 25 mm thick with cement concrete 1:2:4 (1 cement : 2 coarse sand : 4 graded stone agg. 10 mm nominal size) |
| 17 | Extra for providing & mixing water proofing material in cement concrete work in the proportion recommended by the manufacturers.*Per bag of 50 kg of cement used in the mix |
| 18 | Making plinth protection 50mm thick of Cement Concrete 1:3:6 (1cement : 3 Coarse Sand : 6 graded stone aggregate 20mm nominal size) over 75mm bed of dry laterite aggregate 40mm nominal size well rammed & consolidated & grouted with fine sand including finishing the top smooth |
| 19 | Centering & shuttering including strutting, propping etc. & removal of forms fori) foundation, footings, bases of columns etc. |
| 20 | Centering & shuttering including strutting, propping etc. & removal of forms foriii) Columns, Piers, Pillars, Abutments, Posts & struts (square, rectangle polygon in plan) at all levels |
| 21 | iv) Sides & Soffits of beams, Beam Haunchings, Cantilever, Girders, Bressumers & Lintels plinth beams not exceeding 1m in depth at all levels |
| 22 | xiii) suspended floors, roofs, landings, shelves & their supports, balconies & chajjas at all levels |
| 23 | Centering & shuttering including Strutting, Propping & removal of forms for sloping or battering surface (slabs, beams, louvers, etc) including folded plates i) Where inclination to the horizontal does not exceed 30° requiring shuttering on the underside only |
| 24 | Extra to be added for additional height in centering, shuttering where ever required with adequate bracing, propping etc. including cost of de- shuttering & de-centering at all levels, over a height of 3.5m, for every additional height of 1m or part thereof. (Plan area to be measured) Suspended floors, roofs, landings, beams & balconies (plan area to be measured) |
| 25 | Providing TMT steel reinforcement bars of SAIL, TATA. VIZAG make only (Confirming to IS 1786 of 1986)for RCC work (conforming to I.S. 1786 of 1986) including bending, binding & placing in position in all the floors alongwith the factory made precast concrete cover blocks of specified sizes whose compressive strength is not less than that of surrounding concrete in the structural member |
| 26 | Providing & laying in position machine batched concrete (BMC), machine mixed & machine vibrated design mix cement concrete of specified grade for reinforced cement concrete work including pumping of concrete to the site of laying but excluding the cost of centering, shuttering, finishing & reinforcement including admixtures in recommended proportions as per IS 9103 to accelerate, retard setting of concrete, improve workability without impairing the strength & durability as per the direction of the Engineer-incharge. All works upto floor V level.Add for providing richer or leaner mixes respectively at all floor levels. Providing M-30 grade concrete by using 420kgs of cement per cu.m. of concrete instead of M-25 grade of B.M.C. |
| 27 | 4 WOOD WORKSProviding & fixing wood work in frames of doors, windows, clerestory windows, trusses & other frames wrought framed & fixed in position b) Second class Indian teak wood |
| 28 | Providing and fixing 35 mm thick panelled glazed or panelled and glazed shutters for doors, windows and clerestory window including anodized aluminium butt hinges with necessary screws:b) Second class Indian teak wood |
| 29 | Providing& fixing flush door shutters decoration type core of block board construction with frame of first class hard wood & well matched first class Indian teak ply veneering with vertical grains & cross bands & face veneers on both faces of shuttersb) 35mm thick including anodized aluminium butt hinges with necessary screws |
| 30 | Providing flat iron hold fast 40 cms including fixing to frame with 10mm dia bolts, nuts & wooden plugs & embedded in cement concrete block 30x10x15 cms 1:3:6 mix (1 Cement : 3 Coarse Sand : 6 Stone aggregates 20mm nominal size)b) 40 x 3 mm flat iron hold fast 15cm long |
| 31 | Providing & fixing MS grill of required pattern in wooden frames of windows, masonry etc with MS flats, square or round bars with round headed bolts & nuts or by screwsa) Plain Grill |
| 32 | Providing & fixing bright finished brass tower bolts (barrel type) with screws etc. completec) 150x10 mm |
| 33 | Providing & fixing bright finished brass handles with necessary screws etc completea) 125 mm |
| 34 | Providing & fixing bright finished brass door latch with necessary screws etc completeb) 250 x 16 x 5 mm |
| 35 | Providing & fixing bright finished brass 100 mm. mortice latch & lock & a pair of levers, handles with necessary screws etc. complete (Indian make of approved quality) |
| 36 | Providing & fixing 150 mm bright finished brass floor door stopper with rubber cushion screws etc. to suit shutter thickness complete |
| 37 | Providing & fixing brass hydraulic door closer of make Everest universal 68 or equivalent with necessary screws & fittings complete |
| 38 | Wood Finish Wood Core FRP (Fiber Reinforced Polymer) Door ShutterManufacture, Supply & Installation (including accessories as mentioned below) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) door shutter of specified thickness as per options below by using tray system with seasoned hard wood, moisture less than 17%, wooden styles for Top rail & lock rails. FRP (Fiber Reinforced Polymer) laminate made up of 450 grams per sq.mts (gsm) chop strand matt & unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps) & printed matt having wooden textures used along with UV Resistant resin to give the clear texture on the door. The core of shutter will be filled with MR 2nd grade BlockBoard. The Shutter to be water proof as well as mild acid / alkali resistant manufactured using RV TIFAC (R V Engineering College, Bangalore & Technology Information Forecasting & Assessment Council) technology in line with IS 13034 1990 test Standard in an ISO 9001 – 2015 certified factoryAccessories:i) S. S. Hinges 4” - 3 Nos ii) S. S. Latch - 1 Noiii) Tower Bolt 5” - 2 Nos iv) Handle 5” - 2 Nos a) Shutter Thickness 32mm |
| 39 | FRP (Fiber Reinforced Polymer) Frames Manufacture, Supply & Installation (with anchor fastener) of EPEE or equivalent Goan make FRP (Fiber Reinforced Polymer) Frame of cross section as per options below with right angle joint & FRP (Fiber Reinforced Polymer) laminate made from 450 grams per sq.mts (gsm) chop strand glass fiber (matt) & unsaturated polyester resin with viscosity range of 400/450 centipoises per second (cps). The core of frame would be filled with seasoned wood as infill material. The slot of frame for door resting will be of suitable width so as to take specified thickness door.. The frame will be water proof as well as mild acid/ alkali resistant manufactured in an ISO 9001- 2015 certified company b) 4\" x 2\" |
| 40 | 5 STEEL AND ALUMINIUM WORKSProviding & fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding & handling etc. complete as per direction of the Engineer-incharge: windows with three sliding shutters using 18 mm series shutters sectionb) Plain glass |
| 41 | Providing & fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding & handling etc. complete as per direction of the Engineer-incharge: Adjustable louvered windows c) Figured glass |
| 42 | Providing & fixing anodized aluminium shutters in accordance with the specification annexed with Goa schedule of Rates (2004) Vol & II including all taxes, transportation, scaffolding & handling etc. complete as per direction of the Engineer-incharge: Fixed windows/ ventilators matching with 18 mm series shuttersb) Plain glass |
| 43 | Extra for powder coating with pure polyester powder of shade of required colour on the aluminium section |
| 44 | 6 FLOORING AND FLOOR FINISHESRounding of edges of marble slab to semi circular slope |
| 45 | Providing & fixing Kota stone tread tiles 35mm thick in single piece with rounded of nosing antiskid groove laid on and including 20mm (average) thk bed of cement slurry including pointing with pigmented cement slurry to match the shade of the slab, cleaning etc. complete |
| 46 | Providing & fixing 1st quality ceramic glazed wall tiles (Johnson, Somany, Kajaria) conforming to IS:15622 (thickness to be specified by the manufacture of approved make in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-charge in skirting, risers of steps & dados over 12 mm thick bed of cement mortar 1:3 (1 cement : 3 coarse sand) & jointing with grey cement slurry @3.3kg per sq.m including pointing in white cement mixed with pigment of matching shade completeb) Wall Ceramic Glazed Tiles : 300 x 450 |
| 47 | Providing & laying antiskid floor tiles 12 x 12 upto 16 x 16 in of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) of 1st quality conforming to IS:15622 of approved make in shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including pointing the joints with white cement & matching pigment etc., completeb) Light Shades |
| 48 | Providing & laying vitrified floor tiles in different sizes of Johnson, Somany, Kajaria (thickness to be specified by the manufacturer) with water absorption less than 0.08% and conforming to IS:15622 of approved make in colours & shades as specified laid on 20 mm thick cement mortar 1:4 (1 Cement : 4 Coarse sand) including grouting the joints with white cement & matching pigment etc., complete b) 600 x 600 light shades |
| 49 | Providing & fixing Vitrified tiles in different sizes (thickness to be specified by manufacturer), with water absorption less than 0.08 % & conforming to I.S. 15622, of approved make, in all colours & shade, in skirting, riser of steps & dados, jointing with grey cement slurry @3.3 kg per sqm, including pointing/grouting in white cement mixed with pigment of matching shade completeb) 600 x 600 light shades |
| 50 | Providing & fixing 18 mm thick gang saw cut, mirror polished, premoulded & prepolished, machine cut for kitchen platforms, vanity counters, window sills, facias & similar locations of required size, approved shade, colour & texture laid over 20 mm thick base cement mortar 1:4 (1 cement : 4 coarse sand), joints treated with white cement, mixed with matching pigment, epoxy touch ups, including rubbing, curing, moulding & polishing to edges to give high gloss finish etc. complete at all levels. Granite of any colour & shade, area of slab over 0.50 sqma) Jet black |
| 51 | Providing & fixing laterite stone cladding tiles of 6\" x 12\"or 7\" x 12\" in sizes having thickness 19mm including fixing material - cement, adhesive & installation done in paper joint with natural grout finish, including polishing (warnish or nano coating of completed cladding works) |
| 52 | Providing & laying 60 mm thick factory made cement concrete interlocking paver block of M30 grade made by heavy duty block making machine with strong vibratory compaction & of approved size and design/shape laid in 50 mm thick compacted bed of coarse sand, filling the joints with coarse sand, etc. all complete as per the direction of Engineera) Red & Black in colour |
| 53 | 7 ROOFING AND CEILING WORKSProviding & Fixing of Aluminium Lay-in Perforated Tile Ceiling on 24/14 mm ‘T’ Framework of module 600mm x 600mm. Tiles of size 575mm X 575mm/584mmx584mm made out of 0.6mm thick Aluminium. Perforation of the tiles shall be 2.5mm dia 5.5mm c/c. The Tile shall be manufactured on advanced equipment, which includes several levelling. The tile end shall be raised upward by 38mm & bend outward to lay the tile in framework. The Tile shall be Polyester based, powder coated in white colour. Grid system for fixing ceiling tiles shall comprise of Tees. The 24 /14 mm main tee runners shall be suspended at an interval of 1200mm centre to centre. The 24/14 mm cross tee runner shall be suspended at 600mm centre to centre & further supported with 24/14 mm cross tee at 600mm centre to centre with interlocking arrangements to form grid of 600mm x 600mm. The main tee shall be supported by means of 4mm G.I. rod from slab/roof. The suspension shall be provided at 1200 to 1500mm centre to centre. Tee framework would be made of GI & Powder coated. Acoustic Felt: Non-woven felt made of glass-reinforced fibre glued over the perforation for sound absorption |
| 54 | 8 PLASTERING AND FINISHING WORKS12mm cement plaster 1:4 (1 cement : 4 fine sand) |
| 55 | 6mm cement plaster to ceiling 1: 3 (1 cement : 3 fine sand) |
| 56 | 18mm cement plaster in two coats under layer 12mm thick cement plaster 1:5 ( 1 cement : 5 coarse sand) & top layer 6mm thick with cement plaster 1: 3 (1 cement : 3 coarse sand) finished with spongeincluding providing & mixing water proofing material proportion recommended by the manufacturers, 12mm cement plaster 1: 3 (1 cement : 3 sand) |
| 57 | Applying one coat of distemper primer of approved brand & manufacture on wall surface |
| 58 | Applying priming coat with ready mixed primer of approved brand & manufacture on steel work |
| 59 | Painting two or more coats (excluding priming coat) with superior quality ready mixed paint for steel work of approved brand & manufacture in all shades on new work to give an even shade |
| 60 | Wall painting(two or more coats) with plastic emulsion paint of approved brand and manufacture on new work to give an even shade |
| 61 | Applying one coat of cement primer of approved brand and manufacture on wall surface. |
| 62 | Painting three or more coats with acryllic exterior paint of approved brand & manufacture (Such as Dulex/ Asian Paints/ Sherwin Willians) including applying one coat of cement primer and one coat of surface treatment etc. complete |
| 63 | Providing & applying white cement based putty of average thickness 1.00mm of approved brand & manufacturer, over the plastered wall surface to prepare the surface even & smooth complete |
| 64 | 9 WATER SUPPLY, SEWERAGE, PLUMBING AND SANITATION WORKSProviding & fixing white vitreous china wash basin including making all connection but excluding the cost of fittingsb) Flat back wash basin of size 550 x 400 mm |
| 65 | Providing & fixing 600 x 450 mm bevelled edge mirror of superior glass (of approved quality) complete with 6 mm thick asbestos sheet ground fixed to wooden cleats with C. P. brass screws & washers |
| 66 | Providing & fixing c.p. brass towel rail complete with C.P. brass brackets fixed to wooden cleats with C. P. brass screws a) 600 x 20 mm size |
| 67 | Providing & fixing toilet paper holdera) C.P. Brass |
| 68 | Providing & fixing liquid soap container with C. P. brass lid & brackets fixed to wooden cleats with C. P. brass screwsa) Glass container |
| 69 | Fixing water meter & stop cock in G. I. Pipe line including cutting & treading the pipe & making long screw etc. complete (cost of water meter & stop cock to be paid separately) |
| 70 | Providing & fixing P.V.C. connection pipe with brass unions 15 mm nominal borec) 45 cm (18”) length |
| 71 | Providing & placing on terrace roof of floor two (1st flor roof single piece rotational moulded polythene water storage tank having I S I mark & conforming to I S 12701; 1996b) 500 lit. capacity |
| 72 | Providing & fixing square-mouth S.W. gully trap grade ‘A’ complete with C.I. grating brick masonry chamber & water tight C.I. cover with frame of 300 x 300 mm size (inside the weight of cover to be not less than 4.53 kg). And frame to be not less than 2.72 kg as per standard designb) 150 x 100 mm size –P or S type |
| 73 | Constructing brick masonry manhole or inspection chamber with second class bricks in cement mortar 1:5 (1 cement : 5 fine sand) R.C.C. top slab with 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20mm nominal size foundation concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 40mm nominal size) inside plastering 12 mm thick with cement mortar 1:3 (1 cement : 3 coarse sand) finished with a floating coat of neat cement & making channels in cement concrete 1:2:4 mix (1 cement : 2 coarse sand : 4 graded stone aggregate 20 mm nominal size) neatly finished complete as per standard design d) Inside size 60 x 60cm and 60cm deep including C.I. cover with frame (light duty) 455x610mm internal diameter total weight of cover & frame to be not less than 38 kg. (weight of cover 23 kg) |
| 74 | Constructing soak pit 1.20m x 1.20m x 1.20m filled with laterite stone aggregate 125 to 180 mm including S.W. drain pipe 100 mm diameter and 1.2m. long complete as per standard design |
| 75 | Providing & fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketeda) 110 mm dia |
| 76 | Providing & fixing rigid PVC S.W.R. (soil, waste & rain water drainage pipes of approved including lubricant etc. complete (single/double) socketedb) 75 mm dia |
| 77 | Providing & fixing rigid PVC bend (approved make) for SWR pipes including lubricating etc. complete bend with doora) 110 mm dia |
| 78 | Providing & fixing rigid PVC bend (approved make) for SWR pipes including lubricating etc. complete bend with doorb) 75 mm dia |
| 79 | Providing & fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with doora) 110 mm dia |
| 80 | Providing & fixing single Tee of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with doorb) 75 mm dia |
| 81 | Providing & fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with doora) 110 mm dia |
| 82 | Providing & fixing single “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with doorb) 75 mm dia |
| 83 | Providing & fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door a) 110 mm dia |
| 84 | Providing & fixing double “Y” of rigid PVC (approved make ) for S.W.R. pipes including lubricating etc complete, with door b) 75 mm dia |
| 85 | Providing & fixing nahani trap of rigid PVC (approved make) for S.W.R. pipes including lubricating etc complete, without doora) 110 mm dia |
| 86 | Providing & fixing U.P.V.C. pipe clips (approved make ) for S.W.R. Pipesa) 110 mm dia |
| 87 | Providing & fixing U.P.V.C. pipe clips (approved make ) for S.W.R. Pipesb) 75 mm dia |
| 88 | Providing & fixing R.P.V.C. vent cowl b) 75 mm dia |
| 89 | Providing & fixing NICKEL chrome plated copper alloy Fancy Pillar Cock rocket type Jaquar make or equivalent. Confirming to IS 8931;1993a) 15mm nominal bore |
| 90 | Providing & fixing NICKEL chrome plated copper alloy Fancy BIB Cock Short Body Jaquar make or equivalenta) 15mm nominal bore |
| 91 | Providing & fixing NICKEL chrome plated copper alloy Fancy concealed stop cock with slinding flance 15 mm Jaquar make or equivalenta) 15mm nominal bore |
| 92 | Providing & fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of the Engineer-incharge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases & making good the walls etca) 15mm nominal bore |
| 93 | Providing & fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of the Engineer-incharge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases & making good the walls etcb) 20mm nominal bore |
| 94 | Providing & fixing chlorinated ployvinyl chloride (CPVC) pipes confirming to IS:15778, having thermal stability for hot & cold water supply including all CPVC plain & brass threaded fittings including fixing the pipes with clamps at 1 mt. spacing. This includes jointing of pipes & fittings with one step CPVC solvent cement & testing of joints complete as per direction of the Engineer-incharge. Concealed work (medium duty SDR 13.5 pipe) including cutting chases & making good the walls etcc) 25mm nominal bore |
| 95 | Proving & fixing white vitreous china Wall Hung type (European Type) water closet with seat & lid with C.I. brass hinges & rubber fittings with flush valve nelson/similar fully chromium plated with stop cock, wall flanges, flush pipe or elbow & vaccum breaker coupling etc. including chair bracket/rag bolts, cutting & making good the walls & floors where required & concealed seat support - W.C. Pan with white plastic seat & lid |
| 96 | Providing & fixing Hand Shower (Health Faucet) with 8mm dia, ABS/brass body with double lock 1.00m long Flexible tube (Brass plated stainles steel flexible hose) & wall hook of approved quality confirming to IS standards |
| 97 | Supply & installation of PVC cylindrical type ready made septic tank of 1000 ltrs capacity |
| 98 | 10 MISCELLANEOUS ITEMSProvidinganti – termitetreatment tobuildingsconforming to I.S.S. 6113 part II 1971 (revised) including adoptingprecautions for health hazards and safety measures as required therein with the cost of all materials, chemicals, plants, equipments required for the treatment and furnishing a guarantee for a minimum period of 10 years from the date of completion including eradicatingany infestation of termite free of cost during the guaranty period complete. (The payment will be made on plinth of the building.a) Pre-construction |
| 99 | Waterproofing of sunken slabs, toilet blocks, terraces on slabs under brickbats, roofs, watertanks. Cleaning the surface & filling cracks (if any), applying EPCO ACR wherever necessary, Providing & Moistening the surface with water to render it saturated. Mix Cement & Monobond WF in the ratio of 1.25 kg to 1 by weight & stir continuously. Apply minimum 2 coats with an interval of 12 hours minimum between the coats. Fix fiber mesh while the first coat is still tacky. Cure with sprinkling of water 3-4 times a day. incl. cost of scaffolding transport etc. as per dir of EIC. All the chemicals will be of Krishna Conchem Products Pvt. Ltd. or Equivalent |
| 100 | 11 ASTHETICSAesthetic Item to showcase the Local, National or State Theme. Frames of sizes: 600mm x 600mm - cultural kavi art drawings |
| 101 | 12 ELECTRICAL WORKSINTERNAL WIRINGWiring for light point/fan point/exhaust fan point/call bell point with 1.5sq.mm FR PVC insulated copper conductor single core cable in surface/recessed PVC conduit with modular switch, modular plates, suitable size modular GI box of specified Category & earthing the point with 1.5 sq.mm FR PVC insulated copper conductor single core cable etc. as required(f) Group C-- with Cat B Modular Accessories |
| 102 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required.(a) 2 x 1.5 sq.mm + 1 x 1.5 sq.mm earthwire (20mm Conduit) |
| 103 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required.(b) 2 x 2.5 sq.mm + 1 x 2.5 sq.mm earthwire (20mm Conduit) |
| 104 | Wiring for circuit/ submain wiring alongwith earth wire with the following sizes of FRLS PVC insulated copper conductor single core cable in the independent surface PVC conduit ( medium)of appropriate size as required.(c) 2 x 4 sq.mm + 1 x 4 sq.mm earthwire (20mm Conduit) |
| 105 | Wiring for group controlled light point/fan point/exhaust fan point/call bell point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable in recessed PVC conduit(heavy) & earthing the point with 1.5 sq.mm FRLS PVC insulated copper conductor single core cable etc. as required |
| 106 | Supplying & fixing stepped type electronic fan regulator on the existing modular plate switch box including connections but excluding modular plate etc. as required (b) Cat B |
| 107 | Supplying & fixing suitable size modular GI box with modular plate & cover in front on surface or in recess including providing & fixing 3 pin 5/6 A modular socket outlet & 5/ 6 Amodular switch connection painting etc. as required(b) Cat B |
| 108 | Supplying & fixing suitable size modular GI box with modular plate & cover in front on surface or in recess including providing & fixing 6 pin 15/16 A & 5/6 A modular socket outlet modular socket outlet & 15/16 Amodular switch connection painting etc. as required(b) Cat B |
| 109 | Supplying & fixing 3 pin 5/6 A modular socket outlet & 5/ 6 Amodular switch on board the modular surface/recessed PVC/GI modular box by suitably increasing its modular capacity, modular plate & cover including connection painting etc. as required(b) Cat B |
| 110 | TELEPHONE & DATA NETWORKINGSupplying & fixing of following sizes of rigid PVC conduit along with accessories in surface(medium)/recess(heavy) including cutting the wall & making good the same in case of recessed conduit as required(a) 20 mm |
| 111 | Supplying & fixing of following sizes of rigid PVC conduit along with accessories in surface(medium)/recess(heavy) including cutting the wall & making good the same in case of recessed conduit as required(b) 25 mm |
| 112 | Supplying & drawing/fixing indoor type 0.5 sq.mm FR PVC insulated copper conductor unarmoured telephone cable ITD/DOT approved, with GI saddles on wal or in the existing surface/recesed steel/PVC conduit having folowing pair(s), complete as required(a) 2 Pair |
| 113 | Supplying & drawing of Cat - 6 UTP, 4 pair annealed tinned copper conductor PVC insulated, PVC sheathed, unarmoured data cable in existing surface/recessed steel/PVC conduit of appropriate size including connection, etc. complete as required(a) CAT 6 |
| 114 | Supplying, installation & testing of suitable size modular GI box, modular plate & cover complete with RJ-45 connector (modular LAN socket TX1000/ CAT6) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required(b) CAT B |
| 115 | Supplying, installation & testing of suitable size modular GI box, modular plate & cover complete with RJ-11 connector (modular telephone socket) including concealed metal box/surface GI/PVC Box, modular plate, punching, identifying, complete as required(a) CAT A |
| 116 | Supplying, fixing & configuring 24 Ports + 4 SFP combo, layer 2, GB managed ethernet switch, with web view compliant with IEEE 802.3 standards erected in provided rack complete |
| 117 | DB & MCBSupplying & fixing following way SPN sheet steel MCB distribution board 240 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized & powder painted including earthing etc. as required (but without MCB/RCCB/Isolator)(g) 12 way double door Cat A |
| 118 | Supplying & fixing following way TPN sheet steel, double door, Verticle type MCB distribution board 415 V on surface/ recess complete with tinned copper busbar neutral busbar earth bar dinnbar detachable gland plate interconnections phosphotized & powder painted including earthing etc. as required (but without CB/RCCB/Isolator)interconnection between incomer MCB & busbars of following ways (but without MCBs as required) (d) 4 way (8+12), double door, Vertical type, Cat B |
| 119 | Supplying & fixing 6 A to 32 A,C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as required(f) SP, Cat B |
| 120 | Supplying & fixing 6 A to 32 A,C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as required(g) SPN, Cat B |
| 121 | Supplying & fixing 63 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as required(i) TP, Cat B |
| 122 | Supplying & fixing 63 A, C series MCB suitable for lighting & other loads of following poles in the existing MCB DB complete with connections testing & commissioning etc as required(j) TPN, Cat B |
| 123 | Supplying & fixing 20 A 240 V SPN industrial type socket outlet with 2 pole & earth metal enclosed plug top along with 20 A, C series SP MCB in sheet steel enclosure in surface or in recess with chained metal cover for the socket outlet & complete with connections testing & commissioning etc. as required\"(b) Cat B |
| 124 | EARTHINGEarthing with GI earth pipe 2 mts long 40 mm dia medium class with ISI mark, of approved brands, including accessories & providing masonry enclosure with CI/RCC cover having locking /lifting arrangement & watering pipe etc. with charcoal or coke & salt) as required as per the Earthing Drawing provided by the Engineer-Incharge. The scope of work includes the following: a) Excavation of pit of size 1.0x1.0x2.0 mtrs(min) & disposal of excavated soil. b) Class B GI pipe, 40mm diameter as per specifications. c) Charcoal/salt as per specs (paid seperately). d) Refilling the pit of size 1.0x1.0x2.0 mtrs(min) with soft black soil of minimum resistivity i/c transportation. e) Masonary chamber with proper foundation, cover plate & locking arrangement. f) Testing of earth value with earth megger & certifications of its value. Aluminium tag with embossed earthing value to be attached to the pipe. g) watering arrangement (plumbing will be paid seperately)(a) In soily strata |
| 125 | Extra for using salt and charcoal for pipe earth electrode as required( 65 Kgs of Charcoal and 5 Kgs of Salt) |
| 126 | Providing & fixing 6 SWG dia GI wire on surface or in recess for loop earthing as required |
| 127 | Providing & fixing 4 mm dia copper wireon surface or in recess for loop earthing as required |
| 128 | LIGHT FIXTURE & FANSSupplying & erecting LED square/circular Max. 14 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 1500 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED |
| 129 | Supplying & erecting LED square/circular Max. 25 W down lighter/Panel Light having pressure die-cast aluminium housing, polystyrene diffuser having system lumens output of Min. 2750 Lumens, min. efficacy of 110 lumen/W, CRI>80, CCT upto 6500K, Beam Angle of 120 deg., max. ripple of 5%, THD<10%, p.f. >0.95, operating range of 120-270V, surge protection of 2.5 kV, Life class of 50,000 Hrs at L70B50 including driver, having mounting arrangement with board for surface type or spring loaded mounting clips complete with minimum 2 years warranty as per specification No. FG-IDF/LED |
| 130 | Supplying LED concealed type foot / step light with aluminium body for indoor / outdoor application suitable for 4W - 6W LED including driver and erecting by making necessary arrangement / recess in wall to make it flush with surface with minimum 1 year warranty as per specification No. FG-IDF/LED. |
| 131 | Supplying and erecting anodized aluminium mirror light LED fitting (2 feet) Max. 12W with high transitivity diffuser with min. system lumens output of 1200 lumens, min. efficacy of 100 lumen/W, CRI>80, CCT upto 6000K, Beam Angle of 110 deg., Ripple<5%, THD<20%, p.f. >0.95, operating range of 200-270V, surge protection of 2 kV, Life class of 50,000 Hrs at L70B50 including driver with end caps on provided PVC Block / wooded board with minimum 2 years warranty as per specification No. FG-IDF/LED. |
| 132 | Supply & erecting of 9 inch (225 mm sweep) exhaust fan, 1400 rpm, complete with all accessories.(a)Cat A |
| 133 | Supply & erecting fan hook box (100 mm diameter or equivalent square size, 75mm deep) fabricated out of 16 SWG sheet steel with 10 m round bar hook bounded to RCC steel upto 50 mm length protruding on each side of the box, including painting with 2 coats of red oxide, complete as required |
| 134 | Supplying & erecting Energy Saving BLDC Ceiling fan 230 V A.C. 50 cycles 1200 mm, Max. Energy Consumption of 28W having service ratio (CMM/W) of Min. 8 , PF>0.9, THD<10% with IR remote control, Temperature Rise of Max. 40 deg.C, having external mounted control PCB completely erected in position as per specification no. FG-FN/CF |
| 135 | Supplying & erecting ‘B’ grade G.I. pipe / M.S. pipe down rod duly painted for fan complete erected with PVC three core flexible cable 1 sq. mm copper PVC wire |
| 136 | METER BOXSupply & erecting meter box suitable for three phase energy meter & incoming SP/TP MCB, fabricated out of 16 SWG sheet steel, powder coated, complete as required & conforming to the requirements of Goa Electricity Deaprtment |
| 137 | Supply, installation, testing & commissioning of electronic type three phase energy meter (KWh), 4 wire, ISI marked, in polycarbonate or sgheet steel body (base mounting type) with counter display/LCD display, with ELT, in Class 1.0, 50 Hz, 240 V. AC duly tested by MRT along with Test Certificates, complete as required of following capacity of make L & T only(c) 50 to 100 A |
| 138 | CABLE & TERMINATIONLaying of one number PVC insulated & PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm direct in ground including excavation in the form of a trench as per Cable Trench Drawing provided by the Engineer-Incharge, sand cushioning with screened sand bed of 20mm thick, protective covering with bricks placed lenghtwise on top of cable all over the run & backfilling the excavated earth without stones or hard material & making the surface proper with 15 cm crown on the top complete as required(a) In all type of strata |
| 139 | Laying of one number PVC insulated & PVC sheathed/XLPE power cable of 1.1 KV grade of size not exceeding 25 sq.mm on surface,etc. complete as required |
| 140 | Supply & fixing of cable route marker 15 cms diameter of GI plate 6mm thick with inscription theron bolted or welded to 25mm x 25mmx 5mm angle iron 60 cms long & fixing the same in ground with PCC etc complete as required |
| 141 | Supply of 4 core armoured PVC/XLPE insulated, PVC sheathed aluminium conductor cable of 1.1 KV grade with ISI mark conforming to IS:1554(Part I), IS:7098(Part I) with latest amendments of following size (5) 4 Core 16 sq.mm |
| 142 | Supplying & making cable end terminations with brass compression gland & aluminium lugs for folowing sizes of 4 Core PVC insulated PVC sheathed/XLPE aluminium conductor cable of 1.1 KV grade, complete as required(5) 4 x 16 Sq. mm. |
| 143 | HVACSupplying, installing, testing & commissioning split type variable speed inverter technology with minimum 3 to 1 convertible mode for compressor, room air conditioning unit 1.3TR to 1.6TR capacity having ISEER minimum 3.8 to maximum 4.39 suitable to operate on 250V, 50 Hz, A.C. supply having 1 no of air handling unit hi-wall/floor mounting type complete with refrigerant R32 having copper condenser, minimum 2.5PM filter, self diagnosis feature, stabilizer free operation & temperature display on indoor unit, noise level maximum 50dBA at position as per specification no. AP-AC/ SAC |
| 144 | Providing annual comprehensive maintenance contract for 1.5 TRsplit/window air conditioning unit complete as per terms & conditions. Jobincludes 1) quarterly servicing 2) on call repair 3) replacement of all spares within 24 hours 4) sending standby manpower for VIP movement. The job exclude sheet metal work & plastic material |
| 145 | Carrying out core cutting of size 3\" to 5\" dia x 15\" length in the C.C./rock/stone wall with the help of specialized core cutting machine in proper manner & finishing the site as original |
| 146 | Supplying & erecting HMS PVC conduit 25mm dia. with PVC accessories on wall/ceiling as per specification no.WG-MA/CON |
| 147 | Supplying & erecting elastomeric nitrile rubber / foam tube type sleeves for coating & insulating on provided PC / copper pipes having 9 mm thickness & inner diameter / sizes 32 mm for solar water heater /AC system |
| 148 | 13 INTERIORS, FURNITURE WORKSVERTCAL BOOK STORAGE - 1 nos: Providing, fabricating & installing a storage rack of (L 1300MM, H 2100MM & W 400MM) + (L 2600MM, H 900MM & W 400MM) + (L 1500MM, H 2100MM & W 400MM) + (L 1300MM, H 2100MM & W 400MM) + (L 1200MM, H 900MM & W 400MM)in position made out of 19mm thk BWP 710 marine plywood except back which is made out of 6mm thk BWP 710 marine plywood. All Exposed surfaces finished with 1.0mm thk Laminate of approved shade, All inside surfaces to be finished with 0.7mm thk white laminate. The storage has to be covered with framed glass, properly hinged at the supports. All exposed edges to be finished with TW beading patty (min 10mm) finished with French polish (Min 3 Coats). All inner surfaces seen inside glass door should be finished with 1.00mm Laminate. Shutters fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel \"D\" Handles (6\") etc. Multipurpose lock, Handles etc. complete as per drawing |
| 149 | STORAGE CUPBORD - 1 nos: Providing, fabricating & installing storage cupbord of L 1500MM, H 750MM & W 400MM in position made out of 18mm thk prelaminated particle board with 2mm pvc edge bending. Shutters fitted with SS hinges, Multipurpose lock, heavy duty brushed stainless steel \"D\" Handles (6\") etc. Multipurpose lock, Handles etc. complete as per drawing |
| 150 | WORK STATION TABLE - 5 nos: Providing, fabricating & placing in position computer table of L 900MM, H 750MM & W 600MM made with 18mm Prelaminated particle board with 2mm edge bending. All tables should have inbuilt CPU trolley or CPU hanger, Wire Manager & key board tray of standard size |
| 151 | RECEPTION TABLE - 1 nos: Providing, fabricating & placing in position reception table L 1500MM, H 750MM & W 800MMmade with 18mm Prelaminated particle board with 2mm edge bending with all necessary hardware. |
| 152 | TABLE WITH ROLLERS - 5 nos: Providing, fabricating & installing in position working table with rollers of L 1028MM, W 741MMmade up of wooden legs 3\"x 3\" second class matti wood with top made up of 710 19mm BWP plywood with edge profile 38mm running all around, table legs finished with duco & table top finished with 1mm solid colour laminate, complete with necessary hardware |
| 153 | 16\"x16\" CUSIONS - 2 nos: Providing & placing in position cushions filled with hollw micro fiber fillings maintaining the asthetics of the design, further cushions covered with fabric of 250 GSM |
| 154 | ROLLER BLINDS - 6 windows: Providing & fixing in position roller blinds of approved make, colour, shade of varying length, approved fabric with aluminium extruded rail powder coated in white. Control unit to be made of high strength reinforced plastic. Roller tube to be anodised extruded tube of high strength alloy, including all necessary fittings & fixtures like idler, head rail, control unit, roller tube, bottom rail, operating chain, fixing brackets, clamps, etc. complete. All the materials shall be of approved make. All works complete as per the drawing /image, specs & direction of the engineer in charge, (2.6m x 1.6m, 1.2m x 1.6m, 4.6m x 1.6m, 1.75m x 2.5m, 1.8m x 2.5m, 1.0m x 2.5m) |
| 155 | HIGH BACK CHAIRS - 1 nos: Providing & placing in position high back chairs having head rest with 100% polyester fabric, derived BIFMA Compliant, knee tilt syncro 4 mechanism, Adjsutable External lumbar support, Nylon base with PU castors, class 3 DIN gas lift, height adjustable arm rest complete with all necessary hardware. HBC |
| 156 | WORK STATION CHAIRS - 15 nos: Providing & placing in position workstation chairs with medium back with mesh/ HR Foam seat, derived BIFMA Compliant, syncro 4 mechanism, Nylon base with PU castors, class 3 DIN gas lift, height adjustable arm rest complete with all necessary hardware. WC |
| 157 | GREEN PLANTER - 4 nos: Supplying & fixing in position approved artificial Green plant with PVC pot (pot size around 400mm dia x 600mm height). All the material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge |
| 158 | STAINLESS STEEL DUSTBIN - 5 nos: Providing & placing in position 16 gauge pedal stainless steel dust bin of Grade 304 cylindrical with cover (300mm dia x 650mm ht). All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge |
| 159 | PICTURE FRAME - 2 nos: Supplying & fixing in position approved canvas painting with synthetic frame & lamination. The details need to be as per the instructions of Engineer in charge. All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge, Size 600mm x 1500mm |
| 160 | NOTICE BOARD - 1 nos: Supplying & fixing in popsition Notice Board of size L 1200mm x H 900mm made of Aluminium frame with Acrylic shutter including 12mm thick soft board with blazer cloth top fixed in frame with clip fitting with all stainless steel hardwares such screws, lockong arrangements etc. & making arrangements for fixing on wall all complete as per design. All material shall be of approved make. All works complete as per the drawing, specs, image & direction of the site incharge, |
| 161 | WALL CLOCK - 1 nos: Supply & fixing in position approved make, approved colourwall clock circular or square (min one side 250mm) quartz with bold numbers, 3 hands. |
We are a group of professionals specializing in custom software development, web development, mobile app development, IOT base solutions, web design, graphics & Enterprise solutions provid.
Copyright © 2026 · All Rights Reserved. Terms of Usage | Privacy Policy
For Tender Information Services Visit : TenderDetail
