Tender For Purchase Of Consumables/Hardwares For Cath Lab Of District Hospital Kanhangad-- 1 DES, ZOTAROLIMUS ELUTING CORONARY STENT SYSTEM WITH CORE WIRE AND CONTINUOUS SINSOID TECHNOLOGY, COBALT ALLOY, PLATINUM IRIDIUM CORE, 2 DCGI & CE Approved, Stent Material & Design: L-605 Co-Cr Alloy with Laser cut seamless tubing in serpentine pattern. Stent Strut Thickness: 60µ ultra-thin for all diameters.Polymer Type: Biodegradable Polymer.Guiding Catheter: 5F Compatible. Guidewire Diameter: 0.014’’. RBP: 16 atm. Coating: Conformal coating.Diameter(mm): 2.0,2.25,2.5,2.75,3,3.5, 4.0 & 4.5.Length (mm): 8,12,16,20,24,28,32,36,40, 44 & 48. 3 DES, EVEROLIMUS, DCGI approved cobalt chromium biodegradable polymer.Stent Strut Thickness: 60µ ultra-thin for all diameters.Z link Technology . Coating: Conformal coating. Open Cell Design only with two connectors between the rings. Polymer Type: Biodegradable Polymer.Diameter(mm): 2.0,2.25,2.5,2.75,3,3.5, 4.0 & 4.5. Length (mm): 8,12,16,20,24,28,32,36,40, 44 & 48. 4 DCGI approved Biodegradable polymer based everolimus eluting Coronary stent system with differencial stent architecture of 6 crown design for 2.0- 2.75 mm , 8 crown for 3-3.5 & 10 crown design for 4-4.5 mm Length : 8,13,16,19,24,29,32,37,40,44,48 mm. Diameter : 2.00,2.25,2.5,2.75,3.00,3.5,4.00,4.5 mm 5 CE/DCGI, approved DES,sirolimus drug, cobalt chromium , 70micron strut, SIZES- 2.5,2.75,3,3.25,3.5,4 mm length:8,13,18,23,28,33,38, with plla-pgla based polymer 6 Sirolimus eluting coronary stent system, Biodegradable polymerpoly(D, l lactide) matrix, 65 micrometer strut thickness -Diameter 2.25,2.50,2.75,3.00,3.50,4.00,4.50 Length- 8,12,16,20,24,28,32,36,40mm DCGI approved ,L 605 cobalt chromium platform 65 micrometer struct thickness,Biodegradable polymer,Open and closed cell design (Hybrid) abluminal drug coated.zero foreshortening and dedicated cell design for small(6 cell),medium(8 cell) and large vessel(10 cell) minimizing overstretch. swiss technology. 7 Biodegradable polymerpoly(D, l lactide) matrix,Nano compressed Everolimus molecule for better absorption,65 microns strut thickness -Diameter 2.25,2.50,2.75,3.00,3.50,4.00,x 8,12,16,20,24,28,32,36,40,44,48mm DCGI approved Everolimus eluting coronary stent system ,L 605 cobalt chromium platform 65 microns struct thickness,Biodegradable polymer,Open and closed cell design (Hybrid) abluminal drug coated.zero foreshortening and dedicated cell design for small(6 cell),medium(8 cell) and large vessel(10 cell) minimizing overstretch. swiss technology. 8 DES, sirolimus 3.9nano gram/stent length, cobalt chromiumL605 stent with 80 micron stent thickness with open cell structure for side branch re crossing with gradient coating technology and abluminous coating of drug and the stent design comes with 8 crowns and 2 link connectors in the struts. Comes with improved polymer technology at the tip thereby enhancing better crossing profile and comes with re enhanced stainless steel core wire technology for better pushability. 9 DES, SIROLIMUS,abluminal gradient bioresorbable polymer coating with 80 µm Strut Thickness,Diameter 2.25 - 4mm, Length 9mm - 38mm, One month DAPT, CE approved, 10 DUAL DRUG SIROLIMUS COATED STENT: Fusion coating: Both Stent and Balloon drug coating. Edge Coating: 0.5 mm Proximal and Distal ends of balloon also coated. Sizes: 2.25mm - 4mm Length: 8m to 40 mm. 11 Sirolimus eluting coronary stent system, Biodegradable polymerpoly(D, l lactide) matrix, 65 micrometer strut thickness -Diameter 2.25,2.50,2.75,3.00,3.50,4.00,4.50 Length- 8,12,16,20,24,28,32,36,40mm DCGI approved ,L 605 cobalt chromium platform 65 micrometer struct thickness,Biodegradable polymer,Open and closed cell design (Hybrid) abluminal drug coated.zero foreshortening and dedicated cell design for small(6 cell),medium(8 cell) and large vessel(10 cell) minimizing overstretch. swiss technology. DES. 12 DES, EVEROLIMUS, CE Approved COBALT CHROMIUM PLATFORM, 50 MICRON STRUT THICKNESS, Biodegradable and Biocompatible Polymer, Size: 2.25(mm) Stent Lenth 8 to 48 (mm) 13 Tapered DES, SIROLIMUS coronary stent with biodegradable polymer, DES,Sirolimus,cobalt chromium Long stent with Length more than 48 mm 14 Bifurcation stent Sirolimus Eluting, Cobalt chromium 15 DES, EVEROLIMUS,DCGI approved COBALT CHROMIUM PLATFORM, 60 MICRON STRUT THICKNESS,Combination of Open ended in close ended cellshybrid design ,coated with Everolimus , Biodegradable Polymer Pllga Polymer.,Diameter 2.25,2.5,2.75,3.0,3.25,3.5,3.75,4 mm Length - 8,10,13,15,18,20,24,28,32,36,40,44 mm 16 USFDA,CE & DCGI Approved, Cobalt chromium, multi Link 8, peak to valley-3-3-3 taller nonlinear link ,fluorinated co polymer, Everolimus coating,100 mcg per cm square, Drug elution period 80% in 30 days & 100% in 120 days Stent Strut Thickness-0.0032’’, Multilayer Pebax with 5 folds, Skive, Slim seal technology, Mid Marker Ballon Placement at Both ends.Stent Diameters: 2.0, 2.25, 2.5, 2.75, 3.0, 3.5 and 4.0 mmStent Lengths: 8, 12, 15, 18, 23, 28, 33, 38 and 48 mm 17 USFDA,CE & DCGI Approved, Cobalt chromium, multi Link 8, peak to valley-3-3-3 taller nonlinear link ,fluorinated co polymer, Everolimus coating,100 mcg per cm square, Drug elution period 80% in 30 days & 100% in 120 days Stent Strut Thickness-0.0032’’,Dual Layer Pebax, Steel Junction Support Mandreal,Round tip, Mid Marker Ballon Placement at Both ends. Stent Diameters: 2.25, 2.5, 2.75, 3.0, 3.5 and 4.0 mmStent Lengths: 8, 12, 15, 18, 23, 28, 33 and 38 mm 18 USFDA,CE & DCGI Approved, Cobalt chromium, multi Link V, peak to valley-3-3-3link ,fluorinated co polymer, Everolimus coating,100 mcg per cm square, Drug elution period 80% in 30 days & 100% in 120 days Stent Strut Thickness-0.0032’’,single Layer Pebax, Junction Support Mandreal, Tapered tip, Mid Marker Ballon Placement at Both ends, Stent Diameters: 2.25, 2.5, 2.75, 3.0, 3.5 and 4.0 mmStent Lengths: 8, 12, 15, 18, 23 and 28 mm 19 PTFE covered stent Stainless steel, Rapid exchange type, Sizes 2.8, 3.5, 4, 4.5, 4.8mm, usable length 143cm, crimped stent profile 0.068inch 20 Coveredstent Diameter:6mm-14mm/Length:30mm-70mm 21 FDA Approved Carotid Stent (closed cell) Nitinol mesh Straight & tapered 22 Balloon expandable Iliac stents(Stainless steel) Stainless steel, Compatible guidewire - 0.035, Diameters- 11,12mm, Length - 30mm 23 Balloon Expandable biliary/renal stent (Stainless steel) Stainless steel, Compatible guidewire - 0.014& 0.018, Diameters- 3-8mm, Lengths - 12, 16, 20, 24, 30cms, Delivery system lengths- 80, 135cm 24 Stent across hip/knee joint,Diameters- 6,7,8mm, Length - >120cm 25 FDA approved self expanding Nitinol stent system for Iliac arteries0.035 compatible ,diameters-6,7,8,9,10mm, guidewire - 0.035,length 20,30,40,60,80,100, Delivery system length - 80,135cm 26 renal stent Diameters-4-7mm, lengths-12-18mm 27 Vascular Carotid stent(opened cell) Diameter 5-10, length 20-40 28 Vascular Carotid stent(closed cell) Diameter 5-10, length 20-40 29 Vascular Self expandable stent 30 Vascular Self expandable long length stent 31 Vascular Peripheral implant system for SFA& BTK stent 32 Covered peripheral stent- self expanding self expanding 33 CTO balloon diltation catheter with high pressure and smallest size of 0.75mm, Noncompliant balloon with tip entry profile 0.019”,Balloon lengths-8-38mm, balloon diameters-2-4.5mm, 0.014” compatible(FDA APPROVED) 34 Semicompliant balloon Balloon size: 1.2mm– 5 mm / Length: 6 mm -42 mm,(FDA APPROVED) 35 Non-compliant PTCA Balloon Dilatation Catheter,with 36 months shelf life catheter length 140cm and rapid exchange length 25cm,0.016(0.41mm) ultra low tip entry profile,multilayered polyamide balloon material,1.95F proximal & 2.67F distal shaft diameter,with selective hydrophilic coating at distal shaft including balloon tip trifold balloon,with 12atm nominal pressure and 20atm RBP(18atm for 5mm) 36 Semi-complaint PTCA balloon dilatation catheter with 36months shelf life,140cm catheter length and 25cm rapid exchange length,proximal 1.95F and distal 2.67F shaft diameter,0.016(0.41mm) low tip entry profile,5F guide catheter compatible,with link resistant shaft and Nylon12 balloon material 37 CTO Indicated and USFDA Approved Semi-Complaint Balloon with Slim Seal Technology on distal tip with lesion entry profile of 0.016, crossing profile of 0.021 and single flexible Tungsten marker available in unique diameter of 1.2mm with variety of lengths, NBP : 12atms, RBP : 18 atms 38 US-FDA approved semi-complaint coronary balloon with Slim Seal Technology on distal tip with crossing profile of 0.021”, Lesion entry profile of 0.017” and Microglide Coating available in diameter 2.25-5.00mm and lengths 6-30mm, NBP : 12atms, RBP : 18 atms 39 US-FDA approved non-complaint coronary balloon with Multilayer CrossFlex Balloon Technology and Round Tip with Lesion Entry Profile of 0.018” available in diameter 1.5mm-5mm and lengths in 6mm-25mm with Skive Technology on Mid shaft of Dilatation Catheter, NBP : 12atms, RBP : 18 atms 40 CE approved semi-complaint coronary balloon with laser bond technology on distal tip with crossing profile of 0.021” and tip entry profile of 0.017” available in diameter 2.25-5.00mm and lengths 6-30mm, NBP : 12atms, RBP : 18 atms 41 CE approved non-complaint coronary balloon with Tri-fold layers and Tip Entry Profile of 0.018” available in diameter 2.0-4.5mm and lengths in 8mm-25mm ,NBP : 12atms, RBP : 18 atms 42 PDMA Japan approved,Non compiant ptca balloon catheter with hydrophilic coating shaft length is 145cm,shaft diameter :1.9f (0.64) proximal ,mid :2.5f(0.84), distal:2.6f (0.86) with double marker , Nominal 12atm to RBP;22 atm for 2.00mm to 4mm, 20atm for 4.5 to 5mm with entry profile 0.43mm. 43 PDMA Japan approved Semi-Complaint Balloons, Lesion entry profile: 0.41(1.00 to 1.50mm) 0.43(2.00 - 4.00mm), Nominal Pressure: 6atm, RBP: 14atm(1.00 - 3.00mm) 12atm(3.25 - 4.00mm), Diameter: 1.9 Fr(0.64 mm) Proximal , 2.5Fr(0.84) Middle , 2.4 Fr(0.79) to 2.7 Fr(0.89)Distal for (1.00 to 1.50 mm) , 2.6Fr(0.87) Distal (2.00 to 4.00 mm), hydrophilic M coating, short balloon bonding and a reinforced shaft. 44 Semi-Complaint Balloons, Tip entry profile: 0.016, Crossing profile: 0.018, 5f & 6f Guiding Catheter compatibility for kissing balloon technique, Hypo-tube design, Nominal Pressure: 6atm, RBP: 14atm, Average burst Pressure: 20atm, working length: 140, Slider Hydrophilic coating, Proximal Shaft OD: 1.9F,Balloon Diameter: 0.075 - 4mm, Balloon Lenght: 5 - 30mm,US FDA/CE approved 45 NC High Pressure Balloons, Tip entry profile: 0.016, Crossing profile: 0.029, 5f & 6f Guiding Catheter compatibility for kissing balloon technique, Nominal Pressure: 12atm, RBP: 22atm, Average burst Pressure: 30atm, working length: 140, Slider Hydrophilic coating, Proximal Shaft OD: 2f, Distal Shaft OD: 2.55/2.6F, Balloon pleats: 3, Compliance: 0.55%,Balloon Diameter: 2 - 5mm, Balloon Lenght: 8 - 18mm,US FDA/CE approved. 46 US/FDA approved , Semi Complaint balloons, Length 1.25,1.5,2,2.25,2.5mm, diameter- 6,8,10,12,15,20,25mm. 47 US/FDA approved , Non Complaint balloons, Length 2,2.25,2.5,2.75,3,3.5,4,4.5mm, diameter- 6,8,10,12,15,20,25,30mm. 48 L-25 Nylon material, thinnest balloon 0.008mm, deep sholder design with 42 degree cone angle, hydrophilic coated, 0.016 lowest entry profile 1.25mm-4.5mm and length 10mm to 40mm, Rapid exchange proximal shaft,NP 8 atm and RBP 18 atm working range and having two platinum iridium marker (DCGI and CE approved) PTCA balloon catheter semi complaint 1.25,1.50,2,2.25,2.50,2.75,3.00,3.25,3.50,4.00,4.5 * 10,12,15,20,25,30,35,40mm respectively 49 L-25 Nylon material, thinnest balloon 0.008mm, deep sholder design with 42 degree cone angle, hydrophilic coated, 0.016 lowest entry profile 1.50mm-5.00mm and length 10mm to 40mm,Rapid exchange proximal shaft,NP 8 atm and RBP 20 atm working range and having two platinum iridium marker (DCGI and CE approved) PTCA balloon catheter Non complaint 1.50,2,2.25,2.50,2.75,3.00,3.25,3.50,4.00,4.5 * 10,12,15,20,25,30,35,40mm respectively 50 Sirolimus eluting balloon nanolute propritory nano carrier drug eluting technology with a drug :3μ/mm² of sirolimus drug release within 60 secs.14 to 28 days drug bio availability in target tissue ,size: 2mm -4mm length:40mm to 100mm (FDA APPROVED) 51 Peripheral Drug Eluting Balloon-0.035guide wire compatible-,Balloon size:4 mm --7mm / Length: 40mm ---150 mm 52 Peripheral OTW Balloons -0.035 guide wire compatible,Balloon size: 4.5 mm– 12 mm / Length: 20mm -120 mm 53 Peripheral Rapid Exchange Balloons -0.014 guide wire compatible,Balloon size: 4.5 mm– 12 mm / Length: 20mm -120 mm 54 CTO Indicated and USFDA Approved Semi-Complaint Balloon with Slim Seal Technology on distal tip with lesion entry profile of 0.016, crossing profile of 0.021 and single flexible Tungsten marker available in unique diameter of 1.2mm with variety of lengths 55 USFDA approved semi-complaint coronary balloon with Slim Seal Technology on distal tip with crossing profile of 0.021”, Lesion entry profile of 0.017” and Microglide Coating available in diameter 2.25-5.00mm and lengths 6-30mm 56 USFDA approved non-complaint coronary balloon with Multilayer CrossFlex Balloon Technology and Round Tip with Lesion Entry Profile of 0.018” available in diameter 1.5mm-5mm and lengths in 6mm-25mm with Skive Technology on Mid shaft of Dilatation Catheter 57 ARMADA 014(Four F) balloon dilatation catheter (BTK) 58 ARMADA 018Balloon dilatation catheter 59 ARMADA 035 Balloon dialation Catheter 60 VIATRAC 0.14 Balloon dialation Catheter 61 Special Inflation Device for high pressure(55 ATM), Swiss made, High Resolution 62 Worlds smallest Non-Compliant CTO balloon/ diameter 0.85mm/ Lesion Entry Profile - 0.016ʺ/ RBP- 23atm/ Hydrophilic coated/ Single Proximal marker 63 PTCA Scoring balloon Catheter, Working range: 2 - 20 atm, Catheter compatibility: 6F, Guidewire compatibility: 0.014,Balloon Diameter: 2- 3.5mm, Balloon Length: 6 - 15mm, catheter Length: 137cm,US FDA/CE approved 64 Sirolimus eluting Rx PTCA balloon dilatation catheter with unique nanotech novel drug delivery system.With a drug Concentration of 3μ/mm² of sirolimus Drug which release within 60 secs. 65 Paclitaxel Eluting PTA balloon catheter with a 0.035 guidewire compatibility and drug Concentration of 3 μ/mm ² paclitaxel with Proprietary drug adhesion technology. With balloon sizes 4mm - 8 mm/ Length : 80 mm - 200 mm. 66 Sirolimus Eluting PTA Balloon Catheter,Nominal Balloon Pressure -6 bar RBP - 20-40mm : RBP 12 Bar, 60-150mm: RBP 10 Bar, Balloon diameter - 2.0mm-7.0mm, Balloon lengths 20-150,CE approved 67 (FDA Approved)non compliant hydrophilic coated balloon with flexible thin markers,tri layer balloons with soft inner and outer elastomer layers that for resistance from high pressures and stronger polymide layer in the middle for aditional and safer high pressur ressistance., shaft diameter of 1.9f proximal and 2.5f in the mid segment 145 cm length with nominal pressure of 12 atm and RBP 22 atm ,lesion entry profile 0.017, Balloon diameter of 0.75 -2.0mm Balloon length - 5mm - 30 mm, working length - 140cm,CE approved 68 Cutting balloon.Balloon size: 2mm – 4 mm / Length: 6 mm, 10mm, 15mm 69 Scoring balloons. Balloon size: 2mm – 4 mm / Length: 6 mm, 10mm, 15mm 70 Regular Workhorse Guidewire with Tapered Elastinite Nitinol Core, Durasteel Ribbon Tip and available in both hydrophilic and hydrophobic coatings between tipload 0.5-0.7gm 71 Regular Workhorse Guidewire with Elastinite Nitinol Core, Hyten Stainless Steel Tip, Intermediate polymer sleeve with Hydrocoat on distal tip between tipload 0.5-0.7gm 72 Regular Workhorse Guidewire with Elastinite Nitinol Core, Hyten Stainless Steel Tip Intermediate polymer sleeve with Smoothglide coating on proximal and Turbocoat on distal tip between tipload 0.5-0.7gm 73 Regular Workhorse Guidewire with Tapered Stainless Steel Core and Shaping Ribbon Tip available in tipload of 0.6gm with PolyTetraFluoroEthylene Coating on Proximal End 74 Medium Support Durasteel Guidewire with Full Polymer Coating available in tiploads between 1.0-1.2gm 75 Extra Support Durasteel Guidewire with Full Polymer Coating available in tiploads between 1.0-1.2gm 76 Stainless Steel Guidewire with Stainless Steel coils and hydrophilic coating availabe in tipload of 1gm with radioapaque tip of 3cm 77 Stainless Steel Guidewire with Intermediate polymer sleeve and hydrophobic coating availabe in tipload between 0.6-0.7gm with radioapaque tip of 3cm 78 Stainless Steel Penetration Guidewire with Core-to-Tip design and hydrophilic coating available in tipload of 4.7gm 79 Stainless Steel Penetration Guidewire with Core-to-Tip design and hydrophilic coating available in tipload of 6.2gm 80 Stainless Steel Penetration Guidewire with Core-to-Tip design and hydrophilic coating available in tipload of 8.7gm 81 Extra Support Durasteel CTO Guidewire with Full Polymer Cover, Gold Marker at 4.5cm from distal tip and tipload between 2.5-2.7gm 82 CTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 4.5-4.8gm Tipload and penetration power of 40 kgpsin 83 PTCA CTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 9.5-9.7gm Tipload and penetration power of 80 kgpsin 84 PTCA CTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 13.5-13.9gm Tipload and penetration power of 120 kgpsin 85 CTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 12.0-12.5gm Tipload and penetration power of 140 kgpsin 86 CTO Guidewire having Durasteel Core, Intermediate Polymer Sleeve available in tipload between 12.8-13.0gm Tipload and penetration power of 200 kgpsin 87 180 cm long , 0.5g tip load PTCA work horse wire Straight / J tip . Slip coatcoating over yhe spring coil , Radiopaque length -30mm ,silicon coating tip 88 180 cm long ,0.8g tip load PTCA wire ,Staright/ J tip .Slip coat coating over the jacket , polimer jacket coating , Radiopaque length -30mm 89 180 cm long ,0.8g tip load PTCA wire ,Staright tip .polimer jacket coating 20 cm, ,Slip coat coating over the jacketRadiopaque length -30mm 90 180 cm long , 0.6g tip load CTO wire .polimer jacket coating 16 cm ,Slip coat coating over the jacket , Tapered tip , Radiopaque length -16cm 91 180 cm long , 1g tip load CTO wire .polimer jacket coating 16 cm ,Slip coat coating over the jacket , Tapered tip , Radiopaque length -16cm 92 180cm long , 1.7g tip load CTO wire Slip coat coating over the spring coil , T apered tip , Radiopopaque length-15cm 93 180cm long , 3.5g tip load CTO wire Slip coat coating over the spring coil , Tapered tip , Radiopopaque length-15cm 94 180cm long , 4.5g tip load CTO wire Slip coat coating over the spring coil , Tapered tip , Radiopopaque length-15cm 95 180 cm long ,3g tip load CTO wire .Silicone coating over the spring coil , Radiopaque length-11cm 96 180 cm long ,4.5g tip load CTO wire .Silicone coating over the spring coil , Radiopaque length-11cm 97 180 cm long ,6g tip load CTO wire .Silicone coating over the spring coil , Radiopaque length-11cm 98 180 cm long ,9g tip load CTO wire .Silicone coating over the spring coil , Radiopaque length-20cm 99 190 cm long 0.5g tip load CTO wire 2.5 cm 100 190 cm long ,3g tip load CTO wire Hydrophilic coating 101 180 cm long ,12g tip load CTO wire , Slip coat coating over the spring coil , excluding the tip, tapeared tip ,Radiopaque length 20cm 102 180 cm extra support long PTCA wire 0.7gtip load Silicone coating over the spring coil Radiopaque length-4cm 103 330cm length ,3g tip load CTO wire for PTCA , Radiopaque length-3cm 104 PDMA Japan Approved 180 cm long, tip load 1gf Floppy work horse wire for PTCA , Straight tip, Core material Distal coating Hydrophilic Proximal coating PTFE, Diameter 0.014(0.36mm),withThe Duo Core direct-joint technology of Runthrough NS family 105 PDMA Japan Approved 180 cm long, tip load 0.6gf Extra Floppy work horse wire for PTCA , Straight tip, Core material Distal coating Hydrophilic Proximal coating PTFE, Diameter 0.014(0.36mm), Extra rail support withThe Duo Core direct-joint technology of Runthrough NS family 106 PDMA Japan Approved 180 cm long, tip load 1gf Hypercoat crossingwire for PTCA , Straight tip, Core material Distal coating Hydrophilic Proximal coating PTFE, Diameter 0.014(0.36mm), Enhanced hydrophilic coating withThe Duo Core direct-joint technology of Runthrough NS family 107 PDMA Japan Approved 180 cm long, tip load 3.6gf Intermediate crossingwire for PTCA , Straight tip, Core material Distal coating Hydrophilic Proximal coating PTFE, Diameter 0.014(0.36mm), withThe Duo Core direct-joint technology of Runthrough NS family 108 300cm length straight tip shape, 0.8g tip load double length CTO wire for PTCA 109 Extension wire 150cm .Compatible with all PTCA wire 110 Guide Wire.018 111 Guide Wire .014 112 CTO Guide wire 113 DOC EXTENSION 0.14-0.018 X 145 cm , can be detached after use, designed to provide the necessary length to allow the exchange of one cathether for another while maintaining the position of the guide wire in the artery 114 Hi-Toreqe Guide Wire 115 Hi-Toreqe Guide Wire 116 hydrophilic coating, 182cm, 300cm-length,0.014”diameter, (Floppy) work horse wire for PTCA,Straight tip/ J tip 117 hydrophilic coating, 182cm, 300cm-length,0.014”diameter, (Intermediate) work horse wire for PTCA,Straight tip/ J tip 118 hydrophilic coating, 182cm, 300cm-length,0.014”diameter, (Standard) work horse wire for PTCA,Straight tip/ J tip 119 Rotawire 120 Pre connected Rotablation catheter.(burr+advancer), 1.25mm,1.50mm,1.75mm,2.00mm,2.25mm,2.38mm,2.50mm 121 IVUS catheter, Opticross(40 MHz) 122 IVUS catheter,Opticross HD(60 MHz) 123 COMET, FFR wire 124 OCT(Optical Coherence Tomography) catheter 125 Tiger curve diagnostic catheter for radial angiogram-size:5F-6F / 100 cm, soft catheter with 1:1 torque control Internationally accepted Terumo quality and equal performance needed for patient safety & to avoid spasm of radial artery,5F-6F / 100 cm, 126 Tiger curve diagnostic catheter for radial angiogram-size:5F-6F / 100 cm, The double brided stainless steelmesh technology with 1: torque control and backup support for both right and left corobnary artery engagement, Non- brided tip sharf, soft round tip, shapes Tig, Tig II, Jacky,sarah inner diameter of 4F is 1.03mm, 5F is 1.20mm and 6F is 1.30mm, Japan, USFDA, CE approved 127 Pigtail,5F & 6F / Lengths 100, 110 & 125cm, Side holes 6 & 12 128 Multipurpose(MPA1,A2,B1,B2) diagnostic catheter ,5F-6F / 100 cm, 129 Amplatz Catheter Left/Right-AR/AL1,2 diagnostic catheter,5F-6F / 100 cm, 130 Judkins right / left diagnostic catheter (JR/JL),4F-7F / 100 cm, 125 cm 131 NTR( no torque right) catheter,useful for engaging anteriorly angulated bypass graft(including LIMA from the left radial approch& RIMA from the femoral approach) 132 Extra Back up Guiding Catheter for PTCA,6F-8F / 47-110 CM, steel braided 133 Judkins Left /Right Guiding Catheter for PTCA,6F-8F / 47-110 CM, steel braided 134 Femoral right guiding catheter for PTCA ,5-8F /47 -110 cm 135 Femoral left guiding catheter for PTCA ,5-8F /47 -110 cm 136 Multipurpose guiding catheter for PTCA,6-8F /47 -110 cm 137 Amplatz right guiding catheter for PTCA,6-8F /47 -110 cm 138 Amplatz left guiding catheter for PTCA,6-8F /47 -110 cm 139 Short Amplatz right guiding catheter,5-8F, Curve style 1, 2 140 Short Amplatz left guiding catheter,5-8F, Curve style 0.75, 1,1.5, 2, 2.5,3,4 141 Guiding Catheter for renal,size – 7-9/ length – 55,96 142 Guide Extension Catheter,120 cm Proximal hypotube shaft, 0.057 (1.45 mm) Innerdiameter, Hydrophilic coating, Atraumatic tip, Extended length 25cm, 2 radio-opaque markers 143 Ikari Curve Right Guiding Catheter for PTCA, 6F-8F / 47 -110cm 144 Contralateral left support (CLS) Guiding Catheter for PTCA,6-fF /47 -110 cm 145 Ikari Curve Left Guiding Catheter for PTCA, 6F-8F / 47 -110cm 146 PDMA Japan approved Guiding catheter Flexible meterial of tip, PTFE Inner layer, Catheter Length 100cm - 120cm, Shaft inner layer meterial Polytetrafluoroethylene -PTFE, Branding High Strength flat wire mesh pattern 147 Mother and child catheter - size – 5F-8F/length 25cm ,5F-8F, Rapid Exchange Length 25 -cm 148 DCGI/CE/USFDA approved, PTCA Guiding catheter,TRUELUMENTM technology for uniform diameters from hub to tip , Catheter range should have short tip, long tip (16 mm long) for active and passive support, side holes, Braiding design should be hybrid ideally flat-on-round wire braiding, PTFE lining for lubricious lumen from hub to tip Tip should be radiopaque (radiopaque marker from the origin of the tip),Large lumen (minimum of 0.070 inner lumen for 6F),5F Long Vista Brite TIP: 16 mm ultrasoft, atraumatic tip for deep seating, additional support and stability, Diameters: 5, 6, 7, 8, 9 Fr, Lenghts: 55 cm/90 cm/95 cm/100 cm 149 DCGI/CE/USFDA approved Diagnostic catheters, Available in 7F, Two stage polyurethane (DUCOR™) construction , Two stage polyurethane (DUCOR™) construction , Braided polyurethane body for maximum flow and handling, Proximal/Distal tip: Softer non-braided polyurethane for maximum flexibility, shape retention, and atraumatic tip, Lengths: 100 cm, 110 cm 150 DCGI/CE/USFDA approved diagnostic catheter,TRUELUMENTM Technology ensures consistent ID from hub to tip , Stainless steel wire braided body wrapped with thrombi-resistant material, Color codes for easy french size identification, Soft, atraumatic, radiopaque tip (radiopaque marker from the origin of the tip), 4F/5F/6F , Lengths: 65 cm/80 cm/100 cm/110 cm/125 cm, All regular shape (Curve 3.5, 4, 4.5) 151 Peripheral support catheter, 152 Peripheral Guiding Catheter,6F,7F,8F 50 cm length 153 Carotid Guiding Catheter(guide catheter for neuro),Size: 7-9F /55,96 154 FDA approved Radial pigtail cathteters 155 AMPLATZ WIRE,super lengths- 260, 300cm, Tip - Straight/shapable, 0.035” 156 PTFE CoatedGuide-Wire0.035x150cm (Trans-PTCA Kit) 157 PTFE Coated Guide Wire 0.035x260cm 158 Hydrophillic Guidewire 035x150 159 Hydrophillic Guidewire 035x260 160 PDMA Japan approved Radifocus guidewire - exchange length Hydrophilic M Coat , Proximal Shaft Spiral-cut PTFE Coated , Straight and Angled tipped, - 018, 025, 032, 035, 038 inches 260cm ,Internationally accepted Terumo quality and equal performance needed for patient safety. 161 PDMA Japan approved Hydrophilic Coated Guidewire Baby -J, Optimized for the Radial Artery, Radius- 1.5mm, Diameter - 3.0mm, Tracks through tortuous anatomy, Diameter - 0.035, Length - 180cm,260cm, Flexible tip length - 3cm, Tip shape - 1.5mm J-Tip. 162 PDMA Japan approved Radifocus guidewire - Single length Hydrophilic M Coat , Proximal Shaft Spiral-cut PTFE Coated , Straight and Angled tipped, - 018, 025, 032, 035, 038 inches 150cm ,Internationally accepted Terumo quality and equal performance needed for patient safety 163 Guide wire M stiff type is a nitinol hydrophilic guide wire covered with polyurethane containing tungsten and a hydrophilic polymer coating (patented M Coating) with good shape memory and high stiffness and resistance and comes in 150 cms length 164 Guide wire M stiff type is a nitinol hydrophilic guide wire covered with polyurethane containing tungsten and a hydrophilic polymer coating (patented M Coating) with good shape memory and high stiffness and resistance and comes in 260 cms length. 165 Guide wire M standard type is a nitinol hydrophilic guide wire covered with polyurethane containing tungsten and a hydrophilic polymer coating (patented M Coating) with good shape memory and resistance, for vessel crossing, lesion access and device support. Comes in straight / angled distal tip and comes in 150 cms length 166 Guide wire M standard type is a nitinol hydrophilic guide wire covered with polyurethane containing tungsten and a hydrophilic polymer coating (patented M Coating) with good shape memory and resistance, for vessel crossing, lesion access and device support. Comes in straight / angled distal tip and comes in 260 cms length 167 DCGI/CE/USFDA approved, diagnostic guide wires,Rosen Heavy Duty and Amplatz Super Stiff PTFE coated,Available in fixed core and moveable core, Straight-tip, J-tip, Wire diameters: 0.018”, 0.025”, 0.032”, 0.035”, 0.038”, Lengths: 150 cm, 175 cm, 180 cm, 260 cm 168 AMPLATZ ULTRA-STIFF SUPPORT WIRE GUIDE Double length with straight tip -0.035, Length: 260 cm 169 Angiographic Guide Wire, PTFE coated, Single Length J tip - 0.035, Length: 80-180 cm 170 DCGI/CE/USFDA approved, Femoral Sheath,0.38’’ Guide wire compatible, Diameters: 4, 5,6,7,8,9,10 & 11 Fr,Lengths: 11 cm 171 DCGI/CE/USFDA approved, Femoral Sheath, Diameters: 6,7,8 Fr, Lengths: 23 cm, With usable dilator 30 cm 172 PDMA Japan approved Sheath Femoral with mini guide wire , GWcompatibility0.025(0.64) or 0.035(0.89) for 4 Fr, and 0.038(0.97) for all others, sheath size ranging from 4F - 11F , length ranging from 10cm - 25cm , wire length 45cm 10cm sheath and 80 cm for 25 cm sheath, Thin radiopaque sheath with anti-kinking sleeve for easy catheter handling 173 PDMA Japan approved Slender sheath Radial sheath 10cm long ,Guide wire 0.025(Plastic) with unique thin wall structureto perform procedure without upsizing to a large sheath with International Terumo quality 174 PDMA Japan approved Radial sheath with mini guide wire , GWcompatibility0.025(0.64) for 4 Fr, 0.035(0.89) for all others, sheath size ranging from 4F - 11F ,length ranging from7cm - 10cm , wire length 45cm,Thin radiopaque sheath with anti-kinking sleeve for easy catheter handling 175 Mullins Sheath 6Fr-14Fr 176 Cross Over long, Braided, Kink-Resistant, Hydrophilicand with 1 level of Stiffness Sheath For Peripheral Interventions - With Valve (Sterile) - 6 Fr to 8 FrLength: 40 CM 177 Long Sheaths- Carotid access system,- Coil-reinforced, Braided, Kink Resistance, and Hydrophilic Coating = 6Fr to 8 Fr with 80 cm to 110 cm 178 Long Sheaths- Carotid access system, Tibial infrapopliteal access system, - Coil-reinforced, Braided, Kink Resistance, and Hydrophilic Coating = 4Fr to 5Fr with 80 cm to 110 cm 179 Cross Over long, Braided, Kink-Resistant, Hydrophilicand with 3 level of Stiffness Sheath For Peripheral Interventions -(Sterile) - With Valve (Sterile)- 5 to 12 Fr,Length: 45 to 110 Cms 180 Handshapeable Long Sheath - Coil-reinforced, Braided, Kink Resistance, and Hydrophilic Coating - with Valve = 4 Fr to 9 Fr with 55 to 90 cm 181 Introducer Needle- 18G femoral, with square hub 182 Introducer (Puncture) Needle - 18G X near by 4,7,9 cm- Non-toxic, non-Pyrogenic, Sterile (ONE-PART PERCUTANEOUS ENTRY NEEDLE) 183 Micro catheter ,proximal outer diameter 2.6Fr tip outer diameter 1.4 Fr Distal shaft -1.9 Fr Length 135cm 184 Micro catheter ,proximal outer diameter 2.6Fr tip outer diameter 1.4 Fr Distal shaft -1.9 Fr Length 150cm 185 PDMA Japan approvedMicro catheterhydrophilic coated , length 130cm & 150cm , shaft outer diameter: distal-1.8fr,proximal:2.6fr. shaft inner diameter: distal:0.018, proximal:0.021 ,Braiding Stainless steel - SUS, Inner layer Polytetrafluoroethylene - PTFE 186 Thrombus Aspiration Catheter with hydrophilic coating,Sizes – 6-8F, length-140cm, internal diameter – 0.070” – 0.86” 187 PDMA Japan approvedThrombus Aspiration Catheterhydrophilic coating of Distal tip hole length 4mm(6&7Fr), 7mm(8 Fr), Guidewire compatibility 0.014(0.36), length-140cm, CE approved 188 US FDA/CE approved, Thrombus Aspiration Extraction Catheter with hydrophilic coating, Working length: 145cm, Guidewire compatibility: 0.014, Rapid Exchange Segment Length: 10cm, Extraction Lumen Area: 0.858mm^2, Radiopaque marker: located 1mm from the tip, Guide catheter compatibility: 6f / 0.068, Crossig profile: 4.5F / 0.059, Extraction rate: 1.16ml/sec, catheter size 6F 189 DDDR MRI LIFETIME WARRANTY, Atrial Preference Pacing, Atrial Flutter Response, Rhythmiq(AAI with VVI backup), Ventricular rate regulation 190 CRTD Quadripolar,6 Years Warranty,17 pacing vectors, Extended Life(EL) labelled CRTD with Li/MnO2 battery with high caapcity of 2Ah, MRI compatible, Worlds Thinnest CRTD,AV srearch+ and Rhythmiq, AcuShock ( Morphology match,onset stability, Advanced sensing &Filtering),Quick convert ATP 191 CRTP Quadripolar, 6year Warranty, 3T and 1.5T MRI, Longevity upto 13.8 years, 17 pacing vectors, RF Telemetry, Advanced AF HF Diagnostics, Rate adaptive pacing ( Dual sensors of Accelerometer with Minute ventilation to ensure 94% of physiological rate responsiveness ) , Extended Life(EL) labelled ICD with Li/MnO2 battery with high capacity of 2Ah 192 Permanent Pacemaker- VVI/VVIR: Tined lead OR Screw in lead + Sheath (1) ,Pacemaker with capturer management and muti programmable,1.5/3 T full body MRI conditional WITH LIMITED WARRANTY (1 PG+1 Lead+1 Sheath) 193 Permanent Pacemaker – DDD/DDDR: Tined lead & Screw in lead +Sheath (2),Multi-programmable rate responsive DDDR pacemaker with rate drop response, RA and RV capturer management with remote monitoring capabilities for cardio neurogenic patients.1.5/3T full body MRI conditional MRI ,Reduced Ventricular Pacing ,AV+ alog , LIMITED WARRANTY (1 PG+2 Lead+2 Sheath) 194 Permanent Pacemaker – DDD/DDDR: Tined lead & Screw in lead +Sheath (2),Multi-programmable rate responsive DDDR pacemaker with rate drop response, RA and RV capturer management with remote monitoring capabilities for cardio neurogenic patients.1.5/3T full body MRI compatible pacemaker, Manage Ventricular Pacing Alog ,With Life time warranty(1 PG+2 Lead+2 Sheath) 195 Permanent Pacemaker: DDDR Limited warranty 8yrs,Multi-programmable rate responsive DDDR pacemaker with rate drop response, RA and RV capturer management with remote monitoring capabilities for cardio neurogenic patients1.5/3T full body MRI, Reactive ATP,BLUETOOTH SYNC TECHNOLOGY(1 PG+2 Lead+2 Sheath) 196 Permanent Pacemaker – DDD/DDDR: Physiological Pacing Leads(4.1fr) body & Accessories ,Multi-programmable rate responsive DDDR pacemaker with rate drop response, RA and RV capturer management with remote monitoring capabilities for cardio neurogenic patients.1.5/3Tfull body MRI compatible pacemaker: With Life time warranty (1 PG+2 Lead+2 Sheath+1 His Catheter) 197 ICD: SINGLE CHAMBER 1.5/3 T MRI, Single Chamber ICD in DF1/DF4 connection with shock reduction technology, ATP during and before charging, HF diagnostics, Lead integrity alert, T wave oversensing with three zone tachy arrythmia programmability.5+3 Warranty 198 ICD: DUAL CHAMBER 1.5/3 T MRI,Dual Chamber ICD in DF1/DF4 connection with shock reduction technology, ATP during and before charging, HF diagnostics, Lead integrity alert, T wave oversensing with three zone tachy arrythmia programmability, with algorithm to reduce unnecessary RV apical pacing.Smart Shock Technology. Warranty 4+3 199 ICD :SINGLE CHAMBER 1.5/3 T-Full body MRI,Smart Shock Technology, Single Chamber ICD in DF1/DF4 connection with shock reduction technology, ATP during and before charging, HF diagnostics, Lead integrity alert.PhysioCurve design,5+3 Warranty 200 ICD: DUAL CHAMBER 1.5/3 T-Full body MRI,Smart Shock Technology,Dual Chamber ICD in DF1/DF4 connection with shock reduction technology, ATP during and before charging, HF diagnostics, Lead integrity alert.PhysioCurve design,4+3 Warranty 201 CRT-P : Bipolar 1.5/3T Full body MRI ,PhysioCurve design,Bluetooth Wireless Telemetry,CardioSync Optimization,with MVP Mode,Multiprogrammable CRT-P with heart failure diagnostics. Warranty 5yrs 202 CRT-P : Bipolar 1.5/3 T- MRI ,CRT-P with Heart failure diagnostics.,5 yrs warranty 203 CRT-D : Bipolar , 1.5/3 T - MRI,Combo device (CRT-D) with CRT for optimized AV and VV delay, and shock reduction technology. 3+2 yrs warranty 204 Absorbable Antibacterial surgical mesh Envelope for cardiac implantable electronic devices (CIEDs)and Pacing system 205 CRT-D PG only 206 Permanent Pacemaker- VVI-Tined lead & Screw in lead with pulse generator volume10cc, with life time warrenty (MRI COMPATIBLE) 207 Permanent Pacemaker - DDD-Tined lead & Screw in lead, with multiprogrammability ,MRI compatible pacemaker 208 ICD-DUAL CHAMBER ( MRI COMPATIBLE) 209 3T MRI Compatible Single Chamber ICD,Bluetooth Enabled Smartphone Connectivity,DeFT Response, (VF Therapy Assurance),Far Field MD Morphology Discriminator, Senseability,Shocking vector change , Dual Patient Notifiers.CE/FDA/DCGI 210 3T MRI Compatible Single Chamber ICD device,Bluetooth Enabled Smartphone Connectivity,DeFT Response, (VF Therapy Assurance),40J Delivered Energy , Far Field MD Morphology Discriminator, Shocking vector change,Senseability, , Dual Patient Notifiers, Congestion Monitoring CE/FDA/DCGI 211 ICD: DUAL CHAMBER 1.5/3 T-Full body MRI,Smart Shock Technology,Dual Chamber ICD in DF1/DF4 connection with shock reduction technology, ATP during and before charging, HF diagnostics, Lead integrity alert. 212 Dual Chamber MRI CompatibleICD.,RF Telemetry,AF Suppression, Chamber Onset, 36J Delivered Energy, AF, Senseability, Low Frequency Attenuation Filter, Secure sense Lead Noise Discriminator, Patient Notifiers, >30min EGM storage,ST Monitoring CE/FDA/DCGI 213 MRI Compatible Qudripolar CRT-P Device,14 pacing vectors,, AT/AF Alerts, AF Suppression, maximumEGM Storage CE/FDA/DCGI 214 MRI Compatible Multi Point Pacing CRT-D device.,10 pacing vectors, Auto VectSelect, Parylene Coating, Dynamic Tx over current detection, Shock Guard Technology, Far Field MD Morphology Discriminator, 40J Delivered Energy, Low Frequency Attenuation Filter, Senseability, Deft Response, Patient Notifiers, Congestion Monitoring. CE/FDA/DCGI 215 3T MRI Compatible CRT-D device.,Bluetooth Enabled Smartphone Connectivity,VFTA(VF Therapy Assurance), Shock Guard, Far Field MD Morphology Discriminator, Senseability, over current detection, Dual Patient Notifiers, AF Suppression, AT/AF Alerts, Chamber Onset CE/FDA/DCGI 216 Single Chamber Non Rate Responsive MRI Compatible Pacemaker with 10 years replacement warranty,Multi-programmable Single Chamber MRI Compatible Pacemaker, Option of Active and Passive Fixation IS-1 Lead with all accessories, Auto Capture Output Management Software for battery Optimization, Lead Polarity Switch , Pacemaker should have International replacementwarranty,Product should be approved by US FDA/CE or DCGI 217 Dual Chamber Rate Responsive Full Body MRI Pacemaker with 7 year warranty, (a.)Multi-programmable Rate Responsive Full Body MRI Compatible Dual Chamber Pacemaker.(b.) Atrial and Ventricular Endocardial Leads both Active and Passive fixation IS-1 Bipolar and Unipolar as per Clinical need.(c.) With at Least 10 Year Replacement Warranty.(d.) Product should be approved by US FDA/CE or DCGI 218 Single Chamber ICD with DF1 Lead Compatibility, (a.) Single Chamber Multi VT/VF Therapy programmable Implantable Cardioverter-Defibrillator.(b.) Must have at least morphology match algorithm working along with onset stability algorithmm to detect Ventricular Tachycardia.(c.) Both Active and Passive Fixation Cardioverter-Defib endocardial lead DF1/DF4 with all accessories as per clinical need.(d.) Product should have 10 years warranty Policy (Prorata Basis)(e.) Device should have US FDA/CE or DCGI approval. 219 Single Chamber ICD Full Body MRI Compatible with DF4 Leads Compatibility, (a.) Single Chamber Multi VT/VF Therapy programmable Full Body MRI Compatible Implantable Cardioverter-Defibrillator.(b.) Must have at least morphology match algorithm working along with onset stability algorithmm to detect Ventricular Tachycardia.(c.) Both Active and Passive Fixation Cardioverter-Defib endocardial lead DF1/DF4 with all accessories as per clinical need.(d.) Product should have 10 years warranty Policy (Prorata Basis)(e.) Device should have US FDA/CE or DCGI approval. 220 Cardiac Resynchroization Therapy with Defibrillator with Bipolar LV Lead and DF1 Difib Lead, (a.) Multi Programmable Cardiac Resynchonization Therapy with Defibrillator (CRTD) with Bipolar LV Lead and DF1 Difib Lead.(b.) Must have at least Morpholog match algorithmm working along with onset stability algorithmm to detect Ventricular Tachycardia.(c.) Bipolar LV Lead with CS Catherter all size and shapes.(d.) Active and Passive Fixation Cardioverter-Defibrillator Endocardial DF1 Leads as per clinical need.(e.) Active and Passive Fixation Atrial Lead as per clinical need(f.) Device should have 6 year Warranty (prorata basis)(g.) Device should have US FDA/CE or DCGI Approval 221 Cardiac Resynchroization Therapy with Defibrillator with Bipolar LV Lead and DF4 Difib Lead, (a.) Multi Programmable Cardiac Resynchonization Therapy with Defibrillator (CRTD) with Bipolar LV Lead and DF4 Difib Lead.(b.) Must have at least Morpholog match algorithm working along with onset stability algorithm to detect Ventricular Tachycardia.(c.) Quadripolar LV Lead with CS Catherter all size and shapes.(d.) Active and Passive Fixation Cardioverter-Defibrillator Endocardial DF4 Leads as per clinical need.(e.) Active and Passive Fixation Atrial Lead as per clinical need(f.) Device should have 6 year Warranty (prorata basis)(g.) Device should have US FDA/CE or DCGI Approval 222 Temporary pacemaker lead 6F compatible with medtronic devices 223 Temporary pacemaker lead 5F compatible with medtronic devices 224 temporary pacing flow direct (balloon tip) 225 Polethylene terephthalate type filter Distal embolic protection device,Compatible vessel diameter-3.5 -7mm 226 Contrast media- Iopamidol,50-90ml(300/350mg Iodine/ml) 227 Iohexol injection 100ml, 350mg/dl 228 Iodixanol injection 100ml, 320mg/dl 229 Embolization coils – Platinum type,Material-Platinum, All available diameters, All available lengths 230 0.035/0.018 Platinum Coils All Sizes 231 0.018 Soft Platinum Coils All Sizes 232 0.035 Inconel Coils All Sizes 233 SUTURE MEDIATED VASCULAR CLOSURE DEVICE, 8F 234 DCGI approved, Y- Connector, Minimizing blood loss and optimizing control of interventional devices, crystal body for easy bubble detection, different open close designs to meet different doctors preferences, Push- click, Screw Type, Double screw type (All types with extention tubing, stopclock, torque device and insertion tool) 235 Y- Connector, 10F Bore with no blood lose and no air embolism, has hemostatic and fixed valve, Bore Size: 10F inner lumen, Rotablator up to 2.5mm burr 236 FDA approved Y connector with two hemostasis seals, polycarbonate body, push click 237 Suture mediated Closure device ,All sizes, 238 Radial closure devices with dual compression balloons with curved support plate and comes with magic tape that is easy to apply and comes with syringe system to permit accurate pressure adjustment and comes in lengths 24cm and 29cms. 239 Inflation Device for super high pressure/55 barcapacity/CE Marked/Made in Switzerland 240 Inflation Device, Gun type 241 FDA approved Inlflation device ,30ml ,35 atm pressure 242 Manifold 3 Port 243 Snare Diameter 5-35 mm,65-120m snare length , Catheter size4-6F 244 Micro Snare Diameter 2-7 mm,65-120mm snare length , catheter size 2-3F 245 Endovascular Snare System -Single loop and interlaced multi loops 246 ASD device (FDA/CE approved),All sizes 247 ASD device (DCGI only),All sizes 248 ASD Device/detachable cable,Amplatzer Multi-Fenestrated Septal Occluder-Cribriform 249 Device loader for ASD, VSD, PDA, 250 Transcatheter aortic valve replacement system: navigator balloondual stopper systemExpandableValve materialBovine pericardium tri-leaflet on a Nickel-Cobalt alloy frameValve ,Hybrid Honeycomb cell designDelivery System. 0.035 Guidewire compatible and catheter length of 120 cm, Diameters: 20 mm, 21.5 mm, 23 mm, 24.5 mm,26 mm, 27.5 mm, 29 mm 251 DCGI- APPROVED TAVR VALVE- SELF EXPANDABLE /BALLOONEXPANDABLE VALVE 252 DCGI approved, PDA device,Duct Occluder Type 1, Compatible with lower Sheath, Retintion Skirt: 10 - 30mm, Proximal Diameter at screw: 4 - 22mm, Distal Diameter at waist: 6 - 24mm, Device Length: 7 - 10mm, Recommanded Sheath size: 6 - 12f 253 DCGI approved, VSD device (muscular), Compatible with lower Sheath,Device Length: 7mm, Right Disc diameter: 10 -30mm, Waist Diameter: 4 - 24mm, Left Disc Diameter: 10 - 30mm, Recommended Sheath size: 6 - 12f 254 DCGI approved, Delivery System - ASD/VSD/PDA occluders,All Sizes 255 DCGI approved, Occlunix 45° Delivery System with Delivery Sheath, dialator, loader, Hemostatic valve and delivery cable for the the delivery of ASD Occluder, Sheath Size: 7 - 14f, Length 856mm 256 Occlunix 180° Delivery System with Delivery Sheath, dialator, loader, Hemostatic valve and delivery cable for the the delivery of PDA & VSD Occluder,Sheath Size: 7 - 14f, Length 856mm 257 DCGI approved, Transparent for visual control, Tubing lengths customized for all needs, pressure resistance up to 1200psi 258 Embolic Protection DeviceDistal Protection DeviceCarotid Filter,Concentrate design(Without Balloon Technology)Can be used for SVG Graft & carotidWire dependent and comes with wire- (Stabilizer, medium support/ extra support)4 Radio opaque MarkersAvailable in Medium & Extra Support Peelaway Development sheathTorque Locking deviceFilter Basket Introducer4 radio opaque marker bands100 micron core filter for polythin memorinewith 0.07 cc filter volume6.17 mm maximum outer diameter 259 Vacuum Pressure Syringes 10 and 20 ml 260 Vacuum Pressure Syringes 30 ml 261 Vacuum Pressure Syringes 60 ml 262 FDA approved Pressure Infusion Bags -500ml and 1000ml 263 FDA approved radial band for vascular hemostasis ,balloon inflated for patient comfort ,available in 24cm and 29cm 264 Distal radial band for vascular hemostasis 265 ETO Gas- Steri Gas 4-100 266 ETO Reels- Size- 5.5cmx200 mtrs 267 ETO Reels- Size- 7.5cmsx200mtrs 268 ETO Reels- Size- 10cmsx200 mtrs 269 ETO Reels- Size- 15cmsx200 mtrs 270 ETO Reels- Size- 20cmx200 mtrs 271 ETO Reels- Size- 30cmx200 mtrs 272 ETO Reels- Size- 40cmx200 mtrs 273 PMO line, Length 200 cms 274 IV Cannula 20Gfor radial arterial puncture for cath procedures without causing spasm 275 IV set, Vented, with leurlock hub 276 Sterile Gauze Piece (pack of 100nos), with stitched sides 277 Antimicrobial incise drape 35cm x 35cm 278 IVL Catheter and Connector Cable,- Intravascular Lithotripsy Intuitive Catheter with Rx system for treating highly calcified lesions,- Integrated 12mm SC balloon,- NP – 6atm/ RBP – 10 atm,- Diameters:2.5,3.0,3.5,4.0mm,- 2 emitters (80 pulses per catheter) 279 CE, USFDA approved sterile disposible angiogram kit contains :-three disposible surgeons gowns, three hand towels, two hole femoral drape with absorbant pad , one table sheet, ten sterile gauzes. 280 CE, USFDA approved sterile Disposible Absorbant Pad 281 CE, USFDA approved sterile table sheet - disposible 282 CE, USFDA approved sterile two hole femoral drape with attached absorbant pad- disposible 283 CE, USFDA approved sterile disposible surgeons gowns 284 CE, USFDA approved sterile disposible C-arm Cover 285 Disposible Patient gown: Front open 286 Syringes: 10 ml, sterile luer lock 287 Syringes: 50 ml, sterile luer lock 288 Elastic Adhesive bandage, flesh coloured , with long lasting adhesion, streches with body movements, and has pores. Size- 10cm x 4/6m. 289 Ultra sound scanning gel- 5L 290 SMS Wrapper sheet ( 100x100 cms) 291 3 way 10cm extension 292 3 way 20cm extension. 293 Absorbable gelatin powder (Gelfoam) 294 IABP balloon,DATASCOPE (CS300) Compatible 295 Helium cylinder for IABP, DATASCOPE (CS300) Compatible 296 ECG Elecrode - Pack of 100 Pieces with ith long lasting adhesion, streches with body movements. 297 Tissue paper( Pack of 100 Nos) 298 ECG paper, Termal, Comaptible for Shiller TMT Machine, (sizes 210mm x 280mm) 299 Disposible Pressure Transducer Kit -Comaptible GE MacLab System & Comen c80 System 300 Filter Paper Sheets
