Tender For Renovation Of 02 No. Type-Ii Quarter Beside Police Out Post Restcamp ( Near Filler Bed ) Under Sub Division No.Ii, Nacd, Apwd, Mayabunder. Sw-Renovation Of Toilet At O.P Badam Nallah Under Sub Division No.Iii, Swadeshnagar.
Tender Value
1.22 Lakhs
Estimated cost
Bid Submission
15 May 2025
0 days left
EMD
2458
Bank guarantee accepted
Document Fee
Ref. Documents
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
mayabunder → Andaman And Nicobar Islands
EMD Exemption
Not Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Renovation Of 02 No. Type-Ii Quarter Beside Police Out Post Restcamp ( Near Filler Bed ) Under Sub Division No.Ii, Nacd, Apwd, Mayabunder. Sw-Renovation Of Toilet At O.P Badam Nallah Under Sub Division No.Iii, Swadeshnagar.
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling doors, windows and clerestory windows (steel or wood) shutter including chowkhats, architrave, holdfasts etc. complete and stacking within 50 metres lead : |
| 2 | Of area 3 sq. metres and below |
| 3 | 12 mm cement plaster of mix: |
| 4 | 1:4(1 cement: 4 fine sand) |
| 5 | White washing with lime to give an even shade: |
| 6 | New work (three or more coats) |
| 7 | Finishing walls with Acrylic Smooth exterior paint of required shade: |
| 8 | New work (Two or more coat applied @ 1.67 ltr/10 sqm over and including priming coat of exterior primer applied @ 0.90 litre/10 sqm) |
| 9 | Providing andlayingCeramic glazed floor tiles of size 300x300 mm (thickness to be specified by the manufacturer), of 1st quality conforming to IS : 15622, of approved make, in all colours, shades, except White, Ivory, Grey, Fume Red Brown, laid on 20 mm thick bed of cement mortar 1:4 (1 Cement : 4 Coarse sand), jointing with grey cement slurry @ 3.3 kg/ sq.m including pointing the joints with white cement and matching pigments etc., complete. |
| 10 | Providing and fixing 1st quality ceramic glazed wall tiles conforming to IS: 15622 (thickness to be specified by the manufacturer), of approved make, in all colours, shades except burgundy, bottle green, black of any size as approved by Engineer-in-Charge, in skirting, risers of steps and dados, over 12 mm thick bed of cement mortar 1:3(1 cement : 3 coarse sand) and jointing with grey cement slurry @ 3.3kg per sqm, including pointing in white cement mixed with pigment of matching shade complete. |
| 11 | Providing and fixing aluminium tower bolts, ISI marked, anodised (anodic coating not less than grade AC 10 as per IS : 1868 ) transparent or dyed to required colour or shade, with necessary screws etc. complete : |
| 12 | 250x10 mm |
| 13 | Providing and fixing aluminium sliding door bolts, ISI marked anodised (anodic coating not less than grade AC 10 as per IS: 1868), transparent or dyed to required colour or shade, with nuts and screws etc. complete : |
| 14 | 250x16 mm |
| 15 | Providing and fixing G.I. pipes complete with G.I. fittings and clamps, including cutting and making good the walls etc.Internal work - Exposed on wall |
| 16 | 15 mm dia nominal bore |
| 17 | 25 mm dia nominal bore |
| 18 | Providing and fixing brass bib cock of approved quality : |
| 19 | 15 mm nominal bore |
| 20 | Providing and fixing G.I. Union in G.I. pipe including cutting and threading the pipe and making long screws etc. complete (New work): |
| 21 | 15 mm nominal bore |
| 22 | 25 mm nominal bore |
| 23 | Providing and fixing P.V.C. waste pipe for sink or wash basin including P.V.C. waste fittings complete. |
| 24 | Flexible pipei) 40 mm dia |
| 25 | Providing and fixing wash basin with C.I. brackets, 15 mm C.P. brass pillar taps, 32 mm C.P. brass waste of standard pattern, including painting of fittings and brackets, cutting and making good the walls wherever require: |
| 26 | White Vitreous China Wash basin size 550x400 mm with a pair of 15 mm C.P. brass pillar taps |
| 27 | Providing and fixing 600x450 mm beveled edge mirror of superior glass (of approved quality) complete with 6 mm thick hard board ground fixed to wooden cleats with C.P. brass screws and washers complete. |
| 28 | Repair to plaster of thickness 12 mm to 20 mm in patches of area 2.5 sqm and under, including cutting the patch in proper shape, raking out joints and preparing plastering the wall surface with white cement based polymer modifiedself curing mortar, including disposal of rubbish, all completeas per the direction of Engineer-In-Charge. |
| 29 | Providing and Fixing factory made WPC door frame made for WPC extruded section having overall dimension of 80x50 mm ( tolerance + 1 mm ) with wall thickness 2.0 mm + 0.20 mm corner of the door frame to be mitred and joined by means of plastic/M.S.galvanised brackets and stainless steel screws. The hinge side vertical of the frames reinforced by galvanised M.Stube of size 19x19 mm and 1 mm + 0.10 mm wall thickness and 3 nos. stainless steel hinges fixed to the frame complete as per manufacturers specification and direction of Engineer-in-charge. |
| 30 | 80 x 50 mm WPC door frame |
| 31 | Providing and fixing factory made single extruded WPC (Wood Polymer Composite)solidplain flush shutter of required size comprising of virgin polymer made up of calcium carbonate and natural fibers ( Wood powder/rice husk/ wheat husk ) and non-toxic additives and fixing with stainless steel butt hinges of reqired size all as per direction of Engineer-in charge. |
| 32 | 35 mm thick |
| 33 | Distempering with oil bound washable distemper of approved brand and manufacture to give an even shade : |
| 34 | New work (two or more coats) over and including water thinnable priming coat with cement primer |
| 35 | Providing and fixing aluminium handles ISI marked anodised (anodic coating not less than grade AC 10 as per IS : 1868) transparent or dyed to required colour or shade with necessary screws etc. complete : |
| 36 | 150 mm |
| 37 | Providing 40x5 mm flat iron hold fast 40 cm long including fixing to frame with 10 mm diameter bolts, nuts and wooden plugs and embeddings in cement concrete block 40x20x20cm 1:3:6 mix (1 cement : 3 coarse sand : 6 graded stone aggregate 20mm nominal size) |
AI Tender Summary
Tender Timeline
May 09, 2025
11:30 IST
Tender Published
Tender notice published.
CompletedMay 15, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedMay 15, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender