|
| 1 | Dismantling work |
| 2 | Dismantling furniture (Cubical ) customized factory made modular free standing L-Shape workstation of size 2100/1800 x 900/600 mm made in 25 mm thick pre-laminated particle board Dismantling storage (M.H.S) Medium Height Storage The overall Structure made in 18mm thick prelaminated particle board& back of storages with 6 mm thick ply. Dismantling partition Medium Height Laminated Partition |
| 3 | Wall |
| 4 | Decorative Accoustic Wooven Panel : Providing and fixing of 9 mm thick 100% polyester fiber (P.E.T.) panel (0.5NRC value) of approved color & design as shown in the drawing or view. The quoted rate should inclusive of pasting with double side tissue paper, hot melt adhesive, glass glue etc. according to different wall surface as available at site. |
| 5 | P&F4mm thick lacquered glass of make saint gobain of approved shade, fixed on existing 12mm thick ply using silicone of approved quality. With floated effect. Silicone sealant to be approved by architect. Silicon Make - Dow Corning or Weber. |
| 6 | Aluminium Skirting :-Providing and fixing 1.5 to 2mm thick extrudedanodized BlackColor mat finish aluminum skirting as per IS standardpasted/fixed over 12 mm thick BWP plyas perArchitects approval. The Skirting will be of following sizes :50mm high |
| 7 | PARTITION |
| 8 | Gypsum PartitionProviding and fixing 100mmgyp-board partition with both sides double layer Gypsum board (Conforming to IS-2095-1982), screw fixed with dry wall screw of 25 mm at 300 mm centers to either sides of 48 mm GI studs (.55 mm thick), having one flange of 34 mm and other flange of 36 mm, placed at 610 mm vertical and 1200 horizontal center to center (both ways) in framework of 50 mm floor and ceiling channels of 32 mm section. All gypsum board edges to be protected with aluminum angles. Finally square and tapered edges of the boards are to be jointed and finished so as to have a flush look which includes filling and finishing with proprietary jointing compound, as directed. Joints to be sand papered to achieve a smooth and seamless finish. |
| 9 | Glass PartitionProviding & fixing anodized Al partition system using 25 x 40/45 mm section with toughened glass. Glass joints to be treated with I section with required acoustic tapes as per manufacturer specification. |
| 10 | DOOR (950 X 2400) |
| 11 | GLASS DOORAluminum Stile door Shutter (Single Glazed):-Supplying & fixing of Single glazedShutter Door-Consisting ofSingle panel glazed door shutter in Anodized aluminium (BlackColor) finish with 70x45 / 75 x40 mm system on all four sides using in vertical, andin top of the door andon the bottom of the door for12mm thicktempered glass insert with alround beading, Door shutter to be formed of 12 mm Toughened glass (Compatible to imported aluminium frame)like Narrow stile mortize lock with 35mm backset, offsethandle , 70mm EPC with one side key and one side thumb turn, surface mounted door closer with hold open, floor mounted door stopper and side / astragal drop seal for sound barrier. |
| 12 | CEILING |
| 13 | GYPSUM CEILINGGypsum Board Suspended Ceiling:-Providing and fixing in position multi level GYPSUM board false-ceiling suspended on G.I. frame work in design as shown in the drawing.The G.I. frame workconsist of Perimeter channel of size 27mm x 0.5mm.Intermediate channel of size 45mm x 0.5mm thick.Ceiling section of 0.5mm thickness.12.5mm thick tapered edge gypsum plaster board fixed to ceiling channel with 25mm dry wall screws at 230mm centers Jointed and finished with requisite filler, paper tape, finisher and primer suitable for Gypsum plaster boards.Rate to include making necessary cut-outs/openings for light fittings.All components to be of India Gypsum / Boral Gypsum. All flat & vertical surface to be measured under this item. |
| 14 | GRID CEILINGGrid Ceiling :-Providing & Fixing ofMineral Fibre Acoustical Suspended Ceiling System withTILES usiingSILHOUETTE EXPOSED GRID. The tiles should have Humidity Resistance (RH) of 95%, NRC Upto 0.7, Light Reflectance >85%, Thermal Conductivity k = 0.052- 0.057 w/m K, Colour White, Fire Performance Class 0/ Class 1 (BS476 Part 6&7) in module of size as mentioned below with Bio Block coating on the face of the tile, suitable for Green Building application, with Recycled content of 63%.The tile shall be laid on Silhouette profile grid system with 15mm white flanges incorporating a 6mm central reveal in white/black colour and with a web height of 45mm and a load carrying capacity of minimum 15.68 Kgs/M2.Silhouette, Main Runners & Cross Tees to have mitred ends & “birdsmouth” notches to provide mitred cruciform junctions. The T Sections have a Galvanizing of 120 grams per M2 & passed through 500 hrs of Salt test. The Tile & Grid system used together should carry a 10 year warrantee. |
| 15 | PAINT |
| 16 | WALL PAINTProviding and applying 2 or more coats ofPlastic Emulsion paint on walls or ceiling wherever advised . The surface shall be thoroughly cleaned and prepared by raking sand papering and applyingputty to achieve smooth and truly levelled surface.Required number of coats and type of primer as prescribed by manufacture shall be applied before the application of finishing coat as recommended by manufactures\" specifications |
| 17 | CEILING PAINTProviding and applying 2 or more coats ofPlastic Emulsion paint on walls or ceiling wherever advised . The surface shall be thoroughly cleaned and prepared by raking sand papering and applyingputty to achieve smooth and truly levelled surface.Required number of coats and type of primer as prescribed by manufacture shall be applied before the application of finishing coat as recommended by manufactures\" specifications |
| 18 | MODULAR FURNITIURE |
| 19 | CABINA MAIN TABLECabin Workstation (L2100 x D1000 x H750mm) + Side Unit (L1050xD450xH750mm)+ Back Unit (L2100xD450xH750mm) +Pedestal Unit (4 Pax):- Supply and fixing customized factory made modular free standing workstation for cabin of size L2100 x D1000 x H750mmmade in 25 mm thick pre-laminated particle board top with 2mm thick PVC edge binding tape of matching shade as per required with side unit of size L1050xD450xH750mm &back unit of size 2100 x 450 mm with sliding/ openableshutter complete. The cabinet included all the necessary hardware such as lock, handles , hinges etc.The shelves spacing in the cabinet would be as per standard box file size as per detail drawing. Each workstation to be provided withdesigner leg base system with understructure framework & one fixed Pedestal units made in 18 mm thk pre-laminated particle board with 2 /0.8 mm thk PVCedge binding tape as per requiredcomplete with 3 drawer unit ( having overall size of 400(w)mmx525mm(d)x700mm(h)with telescopic channel sliding system the front of the drawers shall be made of 18mm thick pre-laminated board ,The drawer unitincluded all the necessary hardware such as centrallock, handles , hinges etc.The cost also includes with flip up box for concealed wire management system. |
| 20 | CHAIRP/I Chairswith MediumMesh back/ Upholsterd, Syncro-tilt, back support & facilities such as gas lift, adjustable arm rests, and upholstered in fabric of choice& five finNylon basefinishwith snap castors of good quality. |
| 21 | M.H.S - Medium Height Storages(2210 x 450 x 1200):- Providing & fixingMedium Height Laminated storageas per drawing . The overall Structure made in 18mm thick prelaminated particle board& back of storages with 6 mm thick ply. Storages finished in 1 mm thick textured laminate from everywhere and also including all SS snaphinges,handles, locks etc & all necessary hardware as required. Shutter size varies between 375-450mm wide & 400mm deep as required(for files, folders coats etc) with select shelves duly adjustable as required on metal stud supports with sleeves set in at intervals of every 375 mm height / or as advised. PVC lipping on all edges with matching shade, including laminated skirting in approved shade with all hardware, magnetic catchers, tower bolts, etc complete as per detailed drawings. All hinge, drawer channels etc to be soft closing from standard make list. The quoted rate should be inclusive of planter carcus with cut out at the storage top as shown in the drawings and having 3mm thick G.I. Sheet on all internal surface of planters. |
| 22 | Others |
| 23 | GRID LIGHT (Specifiction to be as per the existing make/model) |
| 24 | DOWN LIGHTER (Specifiction to be as per the existing make/model) |
| 25 | TRANSITION PROFILES :- P/FAluminium transaction profile wherever necessary as per architects approval.6 x 6mm _U shapped Profile |
| 26 | Floating Shelves (900 X 300) :-P/F floating shelves 8\"-12\" deep & 2\" thick made in 18 mm thick mdf borad & finished in laminate as per approved with all concealed framework required to fix the same in wall.( 900 X 300) |
| 27 | FROST FILMFrosted Crystal :- Providing & fixing 3M Scotchcal Frosted Crystal Translucent, cast PVC, self-adhesive vinyl, special CRYSTAL-effect film to reproduce Sand-blasting effect on glass with customised designs. MCS warranty of 3 (if exposed to direct sunlight) to 5yrs (indoors) must be endorsed by 3M India Limited. ( this can be in a combination of opaque coloured and frosted films as/ design) |
| 28 | HVAC WORK (To be executed as per the site requirment) |
| 29 | ELECTRICAL WORK (To be executed as per the site requirment) |
