|
| 1 | Dismantling floor, hearth or wall tilesincluding cement mortar, concrete bedding andremoving rubbish off the premises complete all as specified and directed. |
| 2 | M&L for Ist quality glazed ceramic colouredtiles of size 450mmx300mmx7 mm thick, laid on vertical surfaces such as skirting, dados and risers to steps etc laid over and including rendering 10mm thickin cement mortar (1:4) set and jointed in neat cement paste of honey like consistency and pointed in white or coloured cement to match the shadeof tiles ,complete all as specified and directed. |
| 3 | M&L for Ist quality Non-skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.06 Sq.m but not exceeding 0.11 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/sqm over and including 15mm thick screed bed in cement mortar (1:6), including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed. |
| 4 | M&L for Ist quality Non-skid ceramic coloured tiles, 7 to 8 mm thick (square/ rectangular) area of each tile exceeding 0.18 Sq.m but not exceeding 0.38 Sq.m, laid in floors with neat cement slurry @ 3.00 kg/sqm over and including 15mm thick screed bed in cement mortar (1:6), including pointing in white cement with pigment to match the shade of tiles,complete all as specified and directed. |
| 5 | M&L for Ist quality, fully Vitrified Ceramic tiles light shade 10 mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqm, in floors etc. set and jointed in neat cement slurry and pointed in white or coloured cement to match.Set and jointed in neat cement slurry and pointedin white or coloured cement to match complete all as specified and directed. |
| 6 | All as per item No 05 above but on vertical surfaces such as skirting , dado risers to stepsover, set and jointed in neat cement slurry and pointed in white or coloured cement to match, complete all as specified and directed. |
| 7 | Taking down cement plaster on brick walls and concrete surfaces including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land ,complete all as specified and directed. |
| 8 | M&L for rendering 15 mm thickin cement mortar (1:6) on fair faces of brick works or concrete surfaces , finished even and smoothwithout using extra cement, complete all as specified and directed. |
| 9 | M&L for rendering 5mm thick in cement mortar (1:3) on RCC ceiling surfaces, finished even and smooth without using extra cement, complete all as specified anddirected. |
| 10 | M&L for rendering 15 mm thick in cement mortar (1:4) on fair faces of brick work or concrete surfaces mixed with water proofing compound @ 3 % by weight of cement, finished even and smooth without using extra cement, complete all as specified and directed. Note - WPC shall be measured and paid separately. |
| 11 | M&L for rendering 15 mm thick using ready mix plaster on brick / concrete surface of external walls finished fair and even, complete all as specified and directred.Note :- Contractor is required to deposit readymix bags for 100% CA quantity to Engr -in-Charge within 15 days of issue to WO-1. |
| 12 | M&L for Washed stone grit plaster on exterior walls in two layers, under layer 12mm cement plaster 1:4 (1 cement: 4 coarse sand ) furrowing the under layer with scratching tool, applying cement slurry on the under layer @ 3 Kg of cement per square metre, top layer 15mm cement plaster 1:1/2:2 (1 cement: 1/2 coarse sand: 2 stone chipping 10mm nominal size) in panels with groove all around as per approved pattern including scrubbing and washing, the top layer with brushes and water to expose the stone chippings, complete all as specified and directed. Note:- Payment for providing grooves shall be measured and paid separately. |
| 13 | Forming groove of uniform size 15mm wide and 15mm deep in the top layer of washed stone grit plaster as per approved pattern using wooden battens,nailed to the under layer including removal of wooden battens, repair to the edges of panels and finishing the groove complete as specified and directed. |
| 14 | M&L for preparation of new plastered wall surfaces and applying two coats of cement base paint, complete all as specified and directed. |
| 15 | M&L for Preparation of new plastered surfaces of ceiling,chajja etc, including brooming down or steel wire brushing; scrapping downsmoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc. and applying three coats of white wash, complete all as specified and directed. |
| 16 | M&L for Preparation of new plastered or un-plastered wall surfaces of any description and applying two coats of oil bound distemper over a coat of Chalk whitening, complete all as specified and directed. |
| 17 | S & F in repairs 600mm X 450mm bevelled edge mirror of selected quality glass, mounted on 6 mm thick AC building board or commercial plywood and fixed to wooden plugs with chromium plated brass screws and cup washers all as specified and directed. |
| 18 | S&F in repairs stainless steel Plate Rack of best quality, made out of 0.80 mm thick stainless steel sheet of size 90 cm x 60 cm x 25 cm with all internal fittings of appoved make, complete all as specified and directed. |
| 19 | Supply only integral water proofing compound conforming to IS-2645-1975, complete all as specified and directed. |
| 20 | Demolition of brick work or stone / bouldermasonry includingall quoins, arches, pillars, etc. built in cement mortar complete all as specified and directed. |
| 21 | M&L forBrick work with sub class \"B\" bricks, straight or curved on plannotexc 6 m mean radius built in cement mortar (1:6) , complete all as specified anddirected. |
| 22 | All as per item No 21 above but except bricks. |
| 23 | S&F in repair 20 mm bore ,CPVCmedium grade, with all fittings(like Elbow, Tee, Socket, GI pipe connector, nipples, tank adaptor etc) and fixed complete to walls and ceilings or laid in floors or concealed, including taking down old U/S GI tubing complete all as specified and directed. |
| 24 | S&F in repair 15mm dia. Stop valve/ Angle valve, Chromium plated, brass, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified and directed. |
| 25 | S&F in repair 15mm dia. Stop valve/ Angle valve, PTMT, screwed down high pressure, with crutch or butterfly handle, screwed both ends for iron pipe or for unions and fixed, complete all as specified anddirected. |
| 26 | S&F in repair 15mm bore pillar tap, cast copper alloy, with capstan heads, fancy type chromium plated, screwed down high pressure, with or without lettered ‘Hot\" or ‘Cold\" with long screwed shanks and fly-nuts, screwed for iron pipe and fixed complete all as specified and directed. |
| 27 | S&F in repair Pillar taps of PTMT any colour high pressure screwed for iron pipe and fixed.(Minimum weight15mm-110gms), complete all as specified and directed. |
| 28 | S&F in repairs 15mm bore bib taps, chromium plated, fancy type cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe or for brass ferrule and fixed., complete all as specified and directed. |
| 29 | S&F in repair bib taps 15mm bore of standard PTMT any colour high pressure screwed for iron pipe and fixed (Minimum weight 15mm-90gms) complete all as specified and directed. |
| 30 | S&F in repair shower roses, brass, chromium plated with or without swivel joints 125mm size incl fixing to steel pipe complete all as specified and directed. |
| 31 | S&F in repair shower arm 15 mm size, 195mm long with bend of 45degree with flange of PTMT any colour.(Minimum weight 40gms), complete all as specified and directed. |
| 32 | S&F in repairWash basins 550x400mm vitreous china (flat back type) any size incl cutting for and pinning in end of brackets for erecting stand but exclusive of fixing of supply and waste pipe but including waste fittings complete all as specified and directed. |
| 33 | S&F in repair Vitreous china squatting pan Orissa pattern size 580x440 mm white with integral foot rest (exclusive flusing cistern & flush pipe) including cast iron \"P\" or \"S\" trap of 100 mm bore pipe fixed in PCC 1:2:4 type B-2and necessary lean concrete, including making good the surface to match with existing floor finish,complete all as specified and directed. |
| 34 | S&F in repairs vitreous china water closet Padestal pattern (white) excluding fixing bolts, flushing cistern and flush pipe and including EWC Seat cover, complete all as specifed and directed. |
| 35 | S&F in repairs PVC valveless, syphonic action type flushing cistern, lowlevel , white, with inlet ball valve, float and handle including brackets and flush pipe of polyethylene of low or high density or PVC 32 mm dia for low level cistern for 10 litres capacity complete all as specified and directed. |
| 36 | S&F PVC in repair PVC connections 15mm size with PTMT nuts of length 450 mm complete all as specified and directed. |
| 37 | S&F in repair ,15 mm bore, Brass CP wall mixerfor mixing hot & cold water screwed down for iron pipe and fixed, complete all as specified and directed. |
| 38 | S&F in repair vitreous china bowl urinal flat back size of 465x355x265mm white (minimum) with grating and union for discharge pipe ,complete including providing and fixing plugs waste coupling of PTMT (minimum weight 32 mm-45gms/40mm-60gms), bedding urinal agianst wall in cement mortar 1:2 securing urinal to plus with and including 60mm long brass screws, pointing around urinal back in cement; fixing automatic flushing cistern with brackets, flush pipe, grating and union for discharge pipe. (Exclusive of fixing supply pipe to flushing cistern, trap and waste pipe) |
| 39 | S&F in repair Glass shelf with Sheet Glass shelf assembly consisting of 5.5 mm thick sheet glass shelf 12cm wide with chromium plated bracket guard ,and railing 60 cm long complete all as specified and directed. |
| 40 | S&F in repair grating doom 100mm dia with waste hole of PTMT (Min wt 25gms), complete all as specified and directed. |
| 41 | S&F in repair, Health faucet (ABS Body) mild steel chromium plated suitable for 15 mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete in all respect as specified and directed. |
| 42 | S&F in repair CP Health Faucet with 1 mtr metalic Expandable tube & hook, suitable for 15mm bore, complete all as specified and directed. |
| 43 | S&F in repair PVC waste pipe, 32mm bore, 750mm long for basin and fixed,complete all as specified anddirected. |
| 44 | S&F in repairs waste coupling of PTMT (half or full threaded), 32mm dia ,complete all as specified and directed. |
| 45 | S&F in repairs waste coupling of PTMT (half or full threaded), 40 mm dia ,complete all as specified and directed. |
| 46 | S&F in repair for rotational moulded polyetheylene water storage tanks tipple layered (cylindrical vertical with closed top) of 500 ltr capacity, hoisted and fixed in any position incl 20mm dia ball float valve with aluminium fiting, GI nipple any fitting dismantling exising water tank complete all as specified and directed |
| 47 | Demolition of cement concrete (unreinforced) in ground floors and pavings n exc 15 cm thickness (below or above ground level) all as specified and directed. |
| 48 | M&L for 75mm thickPCC 1:4:8 type D2 using 40 mm graded stone aggregate as in sub base, complete all as specified and directed. |
| 49 | M&L for sand cushioning for laying of inter locking tiles (paver blocks), complete all as specified and directed. |
| 50 | M&L for coloured Machine pressed precast conctete interlocking paver block any shape and size confirming to IS 15658-2006 of 60 mm thickness, M-35 Grade with grey cement and pigment, complete all as specified and directed. |
| 51 | S&F for providing and laying factory made kerb stone of M-25 grade cement concrete in position to the required line, level and curvature, jointed with cement mortar 1:3 (1 cement: 3 coarse sand), including making joints with or without grooves (thickness of joints except at sharp curve shall not to more than 5 mm), including making drainage opening wherever required, complete all as specified and directed. |
| 52 | M&L for coloured Chequered cement concrete tiles 20cmx 20cm x25mm/30 cm x 30cm x 25 mmthick, setjointed and pointed in neat cement slurry with grey cement and pigment over and including 15mm thick screed bed in cement mortar (1:6), complete all as specified and directed. |
| 53 | M&L for PCC 1:2:4 type B1 using 20 mm graded stone aggregate as in side ofpath/benching/cove fillets etc rounded or chamfered on edges, complete all as specified and directed. |
| 54 | M & L for 75mm thick PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in plinth protection, finished even and fair, complete all as specified and directed. |
| 55 | M&L for providing precast cement concrete (1:2:4) type B1 using 20mm graded stone aggregate in window or door cills, lintels, posts, boundarypillars, frames etc and similar works, of any section as directed, with plain fair faces, including chamfers, weatherings, throating etc. and setting in cement mortar (1:4) complete with joints to match, complete all as specified and directed. |
| 56 | M&L for providing precast cement concrete type B-0 (1:2:4 using 12.5mmgraded stone aggregate) louvers and jallies, 40mm thick (measured solid),including all mouldings but excluding frame, set in cement mortar (1:4), completeall as specified and directed.Note :-Pre-cast frame shall be measured and paid separately |
| 57 | M & L for preparation of new or previously untreated surfaces of steel of any description , over 10 cm in width or girth not otherwise described applying two coats of synthetic enamel paint over a coat of red oxide primer, complete all as specified and directed. |
| 58 | M&L for preparation of old surfaces of wall, filling of holes with plaster of paris and applying one coat of oil bound distemper, completeall as specified and directed. |
| 59 | M&L for complete removal of existing treatment of walls including preparing old plastered surfaces, filling of holes with plaster of paris and applying two coats of oil bound distemper over a coat of 1mm thick wall care putty, complete all as specified and directed. |
| 60 | M&L for preparation of old decorated plastered surfaces of wall, applying one coat of cement base paint including washing rubbing down stopping, complete all as specified and directed. |
| 61 | M&L for complete removal of existing treatment and preparation of surfaces, applying two coats of cement base paint on old plastered surfaces of wall,complete all as specified and directed. |
| 62 | M&L for preparing old decorated wall surfaces, filling of holes and cracks with lime putty or plaster of paris and applying one coat of weather coat/ exterior emulsion paint of electric blue or AF blue colour or white or equivalent colour as approved by GE,over the old decorated wall surfaces , edges of slab, roof/chajja projection and column etc, after necessary preparation with all vaccum based sanding machine, complete all as specified and directed. |
| 63 | M&L for complete removal of existing treatment of walls including preparing old plastered surface, filling of holes with plaster of paris and applying two coat of weather coat/ exterior emulsion paint of electric blue or AF blue colour or equivalent colour as approved by GE, over the old decorated wall surfaces, edges of slab, roof/chajja projection and column etc, after necessary preparation with all vaccum based sanding machine, complete as specified and directed. |
| 64 | M & L for mild steel TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hooping for columns, hooking ends and binding with and including mild steel wire (annealed) not less than 0.9 mm dia or securing with clips complete all as specified and directed. |
| 65 | Excavation of soft/loose soil in post holes (or similar holes ) each not exceeding 0.5 cu. m. getting out, returning, filling in and ramming earth or broken rubble mixed with earth around, in layers not exceeding 25cm, watering, and removing surplus spoil to a distance n. exc 50 mand making good surface complete all as specified and directed. |
| 66 | Removing surplus excavated material (SOIL) to distance not exc. 50 m and depositing where directed at a level not exc. 1.50 m above the starting point complete all as specified and directed. |
| 67 | Returning, filling in, including spreading, levelling, watering and well ramming in layers not exc. 25 cm thick in each layer as in soil complete all as specified and directed. |
| 68 | Dismantling wrought iron or mild steel work of any description not otherwise provided for, complete all as specified and directed. |
| 69 | Dismantling plain or corrugated steel sheeting, any gauge, thickness, including Nainital or similar pattern roof coverings, complete all as specified and directed. |
| 70 | M&L for rendering 10mm thickin cement mortar(1:3) on surfaces of ceiling, finished even and smooth without using extra cement, completeall as specified and directed. |
| 71 | M&L for welding repair works at small patches like hinges, door closer, window repair, steel door/gate fittings like hinge, bolts, bars etc, complete all as specified and directed. |
| 72 | S&FPVC (SWR) gully trap 125/110 mm, setting and jointing with solvent cement, complete all as specified and directed. |
| 73 | S&F PVC (SWR) floor trap, plain with CP grating including jointing with solvent cement, 75mm diameter of outlet, complete all as specified and directed. |
| 74 | S&F in repair PVC (SWR) pipes, 75 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 75 | All as per item No 74 abovebut laid in floors. |
| 76 | S&F in repair PVC (SWR) pipes, 110 mm bore, single socketed, in any length, with rubber ring joints, fixed to wall, complete all as specified and directed. |
| 77 | S&F 110 mm diabore PVC (SWR) bends any radius complete all as specified and directed. |
| 78 | S&F 75 mm diabore PVC (SWR) bends any radius complete all as specified and directed. |
| 79 | S&F 75 mm bore PVC (SWR) vent cowls complete all as specified and directed. |
| 80 | M&L for Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing, complete all as specified and directed. |
| 81 | M&L for Welding in repairs n.exc 2.5cm in length and thickness of metal to be welded exc 6mm but not exceeding 9mm, complete all as specified and directed. |
| 82 | M&L for repairs to steel gate/Wicket gate of sliding door bolt, hinges, pintel, locking arrangment, spike, V-groove/Flat edge heavy duty gate roller, roller rails etc including greasing, welding /riveting to bring the steel gate /wicket gate in service condtion etc, complete all as specified and directed. |
| 83 | S&F for rolled sections as in main and cross beams, hip and jack rafters,truss, purlins where connected to common rafters and running rails, cleat or other connecting plates cutting, welding including Nut Bolts, Fe 410-W(Gde -E-250) quality A all as specified and directed. |
| 84 | S&F mild steel work as in tubular trusses including special shaped washer etc. complete using ERW or induction butt welded tubesconforming to I.S 1161-1979 grade St-240, complete all as specified and directed. |
| 85 | S&F Pre-painted galvalume aluminum zinc coating GI based corrugated steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 86 | S&F Pre-painted galvalume aluminium zinc coating GI based Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/ cladding to wall, fixed with self tapping screws complete all as specified and directed. |
| 87 | M&L for preparation of oldsteel or iron surfaces of any description not otherwise described over 10 cm girth or width and applying one coat of synthetic enamel paint complete all as specified and directed. |
| 88 | M&L for preparation of old painted wooden surfaces of any description, not otherwise described, over 10cm width or girth and applying one coat of synthetic enamel paint (first quality) complete all as specified and directed . |
| 89 | Material and labour for PCC 1:3:6 type C-2 using 40mm graded stone aggregate as in foundation filling and mass concrete and filling of post, complete all as specified and directed. |
| 90 | M&L for 25mm thick plain cement concrete 1:2:4 type B0 using 12.5mm graded stone aggregates as in floor/sub base and finishing concrete surface fair and even to receive top floor finishes, complete all as specified anddirected. |
| 91 | Demolition of cement concrete of any description and in any position not otherwise specifically provided for cement concrete (unreinforced) complete all as specified and directed. |
| 92 | M&L for PCC 1:5:10 type E-2 using 40 mm graded brick aggregate as in filling of sunken portion etc, complete all as specified and directed. |
| 93 | M&L for rendering 10mm thick plaster in cement mortar (1:3) mixed with water proofing admixture (in proportion as per manufacturers instructiion) as in sunken portion, finished the surfaces even and smooth without using extra cement complete all as specified and directed. |
| 94 | S&F in repair 16 mm bore ,CPVCmedium grade, with all fittings(like Elbow, Tee, Socket, GI pipe connector, nipples, tank adaptor etc) and fixed complete to walls and ceilings or laid in floors or concealed, including taking down old U/S GI tubing complete all as specified and directed. |
| 95 | S & F in repair sinks with drainage board made of stainless steel, 1mm thick, kitchen or laboratory with plugs, washers and wastes; including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe, overall size 915mm x 460 mm bowl size 410 mm x 330 mm x 160 mm, complete all as specified and directed. |
