|
| 1 | Schedule-A (B/R Work) |
| 2 | Removal of following existing unserviceable old broken wooden components of various furniture items or similar items carefully without disturbing the adjoining parts and Supply and fixing new components of teak wood in lieu of dismantled components including tightening the joints, pinning, screwing, nailing, wedging, glueing, placing every part in-tact and polishing/painting the disturbed portion of Chair Diningas applicable as per drg No.FD/MAP-II/10. Work will be executed where the furniture exist in Sekhon vihar Offrs Md Accn including BSO\"s Furniture Yard at AF Stn Palam as directed by Engineer-in-Charge:-Supply and fix front leg made out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes, shape and size as per Drgafter removing the old/broken onewithout damaging the other parts complete all as specified and directed. |
| 3 | Allas per item No 1.01 above but rear Leg |
| 4 | Allas per item No1.01 above but back rest |
| 5 | Allas per item No1.01 above but leg stiffener . |
| 6 | Allas per item No1.01 above but front Rail |
| 7 | Allas per item No1.01 above but rear Rail |
| 8 | Allas per item No1.01 above but side Rail |
| 9 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 10 | Removing of old unsv tapestry cloth and supply and fixs newbest quality tepestry cloth (Not less than Rs 200 per meter)as apporoved and directed by in Engr charge. |
| 11 | seat made of 10mm thick BWP IS 710 plywood over which 40 density cushion (Make- Sleepwell/Dureo Flexs/Godrej) foam 75mm thick shall be provided duly covered with best qualitytepestry cloth (Not less than Rs 200 per meter )as approved bt BSO. |
| 12 | All same as per item No. 1.01 above but wooden cleat. |
| 13 | All asper Item No 1.00 here -in- before but TABLE CENTRE ,FD-274:- |
| 14 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel). |
| 15 | Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots ,sap wood and other blemishes after removing theold damaged/broken one per drg without damaging the other parts. |
| 16 | Long rail : All same as per item No 2.02 above but long rail for table centre. |
| 17 | Shor rail : All same as per item No 2.02 above but short rail for table centre. |
| 18 | Stiffener: All same as per item No 2.02 above but short rail for table centre. |
| 19 | Teak wood corner shallbe provided to each legs as per samplerestall as directed by EIC/GE. |
| 20 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 21 | All asper Item No 1.00 here -in- before but TABLE DINING FOR 6 PERSONS:-FD/MAP-II/03:- |
| 22 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel). |
| 23 | Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing theold damaged/broken one per drg without damaging the other parts. |
| 24 | Long rail : All same as per item No 3.02 above but long rail for table dining 6 per. |
| 25 | Shor rail : All same as per item No 3.02 above but short rail for table dining 6 per. |
| 26 | Teak wood corner shallbe provided to each legs as per samplerestall as directed by EIC/GE. |
| 27 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 28 | All asper Item No 1.00 here -in- before but TABLE WRITING:-FD-275:- |
| 29 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mmpre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with hot pressed string bonded as directed. (Make Action tesa, Century, Green panel). |
| 30 | Supply and fixing of sides and bottom of cup board : Itshall be made out of one side melamine faced pre-laminated MDF board exterior 18mm thick confirming to IS in baverian beach shade as per drg . |
| 31 | Supply and fixing of shutters complete with lock : shuttershall be made out of both side melamine faced pre-laminated MDF board 18mm exterior thick confirming to IS in baverian beach shadeas per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher. |
| 32 | Supply and fixleg in repairmade out of well seasoned teak wood free from cracks and knots, sap wood and other blemishes, shape and size as per Drgafter removing the old/broken onewithout damaging the other parts complete all as specified and directed. |
| 33 | Allas per item No 4.04 above but long rail . |
| 34 | Allas per item No 4.04 above but Long stiffener. |
| 35 | Allas per item No 4.04 above but Short rail |
| 36 | Allas per item No 4.04 above but bottom rail of table writing. |
| 37 | Knob |
| 38 | Supply and fixing of back of cup board : Itshall be made out of 6mm thick plywood BWP grade confirming to IS 710 as approved to be fixed as shown on drg . |
| 39 | Supply and fixing of partition of the cupboard : Itshall be made out of one side melamine faced pre-laminated MDF board 18mm exterior thick confirming to IS in baverian beach shade as per drg and as approved and all as directed by Engr-in-charge. |
| 40 | Drawer made of 16 mm thick plywood IS 710 gradewith bothside sumica 0.8/1 mm thick with 1.6 mm thick PVC edging through edge bander machine of shade as approved by EIC/GE with 2 mm thick PVC edging in front &sidesand bottom of drawer shall be 9 mm thick BWP Plywood with white sunmica 0.8 mm thick(Make-Century ply\"\"Sainik 710/Greenply/Archidply /Duroply/National prima) complete with telescopic channel (make -Ebco/Ozone/Hettich) complete . Rest all as per drg. |
| 41 | Teak wood corner shallbe provided to each legs as per samplerestall as directed by EIC/GE. |
| 42 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 43 | All asper Item No 1.00 here -in- before but TABLE DRESSING GENTSFD/E6/MAP/16:- |
| 44 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with hot press string bonded as directed. (Make Action tesa, Century, Green panel). |
| 45 | All same as per item No 5.01 above but side of table dressing gents. |
| 46 | All same as per item No 5.01 above but bottom of table dressing gents . |
| 47 | Mirror : S & F mirror along with frame as per drg made of well seasoned teak wood free from cracks and knots duly french polished. Mirror shall be of electro copper plated polished sheet glass 6 mm thick Make- Saint Gobain/Modiguard. Suitable rawl plugheavy duty as per drg 2 Nos shall be provided to the back of the mirror for hanging. Back of the frame shall be of plywood commercial 6mm thick BWR grade confirming to IS as approved and as shown on drg. |
| 48 | Back : Back shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece after removing the old one. suitable rawl plug as per drg 2 Nos shall provided to the back for hanging . |
| 49 | Material and labour for Scrapping of old polish and dirt from the surfaces of Table Dressing gents by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 50 | All same as per item No 5.01 above but Magnetic catcher for gents mirror |
| 51 | All asper Item No 1.00 here -in- before but TABLE DRESSING LADIESFD/MAP-II/07:- |
| 52 | Back : All same as per item No 5.05 above but back of table dressing ladies. |
| 53 | Side : All same as per item No 5.01 above but suitable for Table dressing ladies with mirror as per the drg. |
| 54 | Bottom : All same as per item No 5.01 above but back of table dressing ladies. |
| 55 | Drawer with Handle and telescopic channel :All same as per item No 16.04 above but suitable for Table dressing ladies with mirror as per the drg. |
| 56 | Replacement of unserviceable table top (both sides and central), making to size fixing new top of required size 18-19 mmpre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make - Action tesa, Century, Green panel). |
| 57 | Supply and fix of mirror : All same as per item No 5.05 above but suitable for Table dressing ladies with mirror as per the drg. |
| 58 | Taking out old pressed /torn old cushions from stooland Supply 75mm foamcushion and 40 densitythick foam cushion (Make- Sleepwell/Dureo Flexs/Godrej) of suitable for stool dressing duly covered with good quality swed tapestry all over(Not less than Rs 200 per metre)cloth of approved color and shade by GE, Each cushion cover shall be provided with best quality zip stitched on one edge of cushion with standard fitting.(Sleepwell and Kurloan) |
| 59 | Taking out old torn/ faded cushion cover fromfoam cushions and supply and fixing new cushion cover to the existing cushion. The cover of the cushion shall be of best qualitytapestry cloth ( Not less than Rs.200 per meter) as approvedby GE complete , Each cushion cover shall be provided with best quality zip stitched on one edge of cushion with standard fitting. |
| 60 | Long Stiffener : It shall be made of well seasoned teak wood free from cracks and knots cut to size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable no of screw wood steel. |
| 61 | Short Stiffener : All same as per item no. 6.08 above but short stiffener of table dressing ladies. |
| 62 | Leg : All same as per item no. 6.08 above but legof table dressing ladies. |
| 63 | CP steel 100mm long handle to the drawers & shutter of table dressing ladies placed in position as shown in drg. |
| 64 | 50mm dia swivel type castors wheel for stool dressing. |
| 65 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 66 | All asper Item No 1.00 here -in- before but SOFA SET 5 SEATER,(2 Single seater and One 3seater,10Nos cushion in each set) FD/MAP-II/02 |
| 67 | Leg |
| 68 | Arm |
| 69 | wooden batten |
| 70 | Teak wood bearer |
| 71 | Taking out old pressed /torn old cushionsand Supply 40 density thick foamcushion of size 21”x22”x4” (Make- Sleepwell/Deuroflexs/Godrej ISI Mark) duly covered with good quality tapestry all over(Not less than Rs 350 per metre) cloth of approved color and shade by GE (Sample of cloth is kept with Enginner-In-Charge), Each cushion cover shall be provided with best quality matching zip stitched on one edge of cushion with standard fitting with pipeing all around and as directed by ENGR-in-C. |
| 72 | Taking out old torn/ faded cushion cover fromfoam cushions and supply and fixing new cushion cover to the existing cushion. The cover of the cushion shall be of best quality tapestry cloth ( Not less than Rs.350 per meter) as approvedby GE complete , Each cushion cover shall be provided with best quality matching zip stitched on one edge of cushion with standard fitting with pipeing all around and as directed by ENGR-in-C. |
| 73 | Scratching the entire wooden pallets of sofa5 seater , filling putty to the bore holes making surface smooth by scratching it with sand emery paper, it shall be French polish with high gloss finish, after properly cleaned and smoothened the surface. |
| 74 | All asper Item No 1.00 here -in- before but SIDE BOARD :FD-1112:- |
| 75 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel). |
| 76 | All as specified above item No 8.01 above but for bottom of side board |
| 77 | All same as per item No 8.01 done but sides for side board. |
| 78 | Supply and fix of back : It shall be made of one side melamine faced pre-laminated MDF board 6mm thick confirming to IS in Baverian beach shade in one piece. |
| 79 | Supply and fixing of shutters complete with knob and lock : shuttershall be made out of both side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shadeas per drg duly fixed with paino type hinges and suitable S/S knob 40mm dia as approved with lock and suitable catcher. |
| 80 | Drawer with handle : Drawer shall be made out of one side melamine faced pre-laminated MDF board 18mm thick confirming to IS in baverian beach shadeas per drg and provided with recessed handle of best quality as approved. Bottom of drawer shall bemade of one side melamine faced pre-laminated MDF board 6mm thick . |
| 81 | Leg shall be made of well seasoned teak wood free from cracks and knots cutto size as per drg duly finished/ french polished over a coat of primer and to be fixed with suitable groving with long/short frame . |
| 82 | All same as per item No 8.07 above but long stiffener. |
| 83 | All same as per item No 8.07 above but Short stiffener. |
| 84 | CP steel 100mm long handle to the drawers & shutter of Bin Linenmulti purpose placed in position as shown in drg. |
| 85 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 86 | All asper Item No 1.00 here -in- before but TABLE PEG ,FD-384:- |
| 87 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel). |
| 88 | Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing theold damaged/broken one as per drg without damaging the other parts. |
| 89 | All same as per item No 9.02 above but long rail for Peg table. |
| 90 | All same as per item No 9.02 above but shortrail for Peg table. |
| 91 | All same as per item No 9.02 above but stiffener for Peg Table. |
| 92 | Teak wood corner shallbe provided to each legs as per samplerestall as directed by EIC/GE. |
| 93 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 94 | All as per Item No 1.00 here -in- before but TV TROLLEY , FD/E6/MAP/04 (R):- |
| 95 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel). |
| 96 | Sides |
| 97 | Baes/Shelves |
| 98 | 5.5mm thick plain glass with magnetic catchers. |
| 99 | 50mm dia swivel type castors wheel. |
| 100 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 101 | All asper Item No 1.00 here -in- before butHAT STAND WITH MIRROR,FD-233:- |
| 102 | Supply and fix of beading : Beading made out of well seasoned teak wood size 35x6mm all around shall be provided to the frame of hat stand as shown on drg . |
| 103 | Supply and fix of plywood : Plywood 4mm thick commercialconfirming to IS 710 duly approved shall be provided wherever required to be fixed with head less nails at the back side of hat stand all as shown on drg and as directed by Engr-in-charge . |
| 104 | Supply and fix of plywood : Plywood one side teak face 4mm thick commercialconfirming to IS duly approved shall be provided wherever required to be fixed with head less nails at the front side of hat stand all as shown on drg . |
| 105 | Supply and fixingof peg : Aluminium peg 100mm long as per sample shall be fixed with screw wood steel 25mm long as shown on drg . |
| 106 | Supply and fix of looking Mirror : Looking Mirror size 440x300x6mm of approved quality make-Modi guard/Saint Gobain/Swastic duly fixed with beading size 35x6mm made out of well seasoned teak wood duly finished as shown on drg . |
| 107 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 108 | All asper Item No 1.00 here -in- before but TEAPOY WOODEN,FD- 382:- |
| 109 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel). |
| 110 | Supply and fix of leg : Leg shall be made of well seasoned teak wood free from cracks and knots , sap wood and other blemishes after removing theold damaged/broken one as per drg without damaging the other parts. |
| 111 | All same as per item No 12.02 above but long rail for teapoy. |
| 112 | All same as per item No12.02 above but shortrail for teapoy. |
| 113 | : All same as per item No12.02 above but stiffener for teapoy. |
| 114 | Teak wood corner shallbe provided to each legs as per samplerestall as directed by EIC/GE. |
| 115 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 116 | All as per Item No 1.00 here -in- before but BIN LINEN PURPOSE WITH IRONING BOARD FDNo,FD/E6/MAP/09:- |
| 117 | Top : Removing of unserviceable table top, making to size fixing new top of required size 18-19 mm pre-laminated MDF board exterior in colour/shade as approved by GE. 2mm thick PVC edging shall be fixed on sides with string bonded as directed. (Make Action tesa, Century, Green panel). |
| 118 | Plywood Commercial 12 mm thick Back ply |
| 119 | Prelaminated partical board 18mm thick to the Door shutter with magnetic catcher |
| 120 | Prelaminated particle board 18mm thick to the drawer. |
| 121 | CP steel 100mm long handle to the drawers & shutter of Bin Linenmulti purpose placed in position as shown in drg. |
| 122 | Material and labour for Scrapping of old polish and dirt from the surfaces of following wooden furniture by means ofusing appropriate sand paper, preparation of surfaces as described in PSand applying French polish in required coats as described in PS to give glossy and smooth finish etc complete all as specified and as directed by Engineer-in-charge. |
| 123 | Note:- The amount of Rs 22984/- against Schedule of Crediton Srl Page 146 shall be deducted from the total amount quoted against Sch \"A\" |
