|
| 1 | Cleaning /removal of blockage/De-silting of sewer line 300 mm diawith mechanical device like super sucker machine, high pressure jetting machine/gantry machine or any other mechanical device.incl taking out debris installation of adequate number of over pumping system leak proof stanching arrangement of U/S & D/S side of work length, temporary rising main etc for smooth flow of sewage system to avoid flood in the area complete all specified and as directed. |
| 2 | Cleaning /removal of blockage/De-silting of sewer line 200 mm diawith mechanical device like super sucker machine, high pressure jetting machine/gantry machine or any other mechanical device.incl taking out debris installation of adequate number of over pumping system leak proof stanching arrangement of U/S & D/S side of work length, temporary rising main etc for smooth flow of sewage system to avoid flood in the area complete all specified and as directed. |
| 3 | Cleaning /removal of blockage/ De-silting of sewer line 150mm diawith mechanical device like super sucker machine, high pressure jetting machine/gantry machine or any other mechanical device.incl taking out debris installation of adequate number of over pumping system leak proof stanching arrangement of U/S & D/S side of work length, temporary rising main etc for smooth flow of sewage system to avoid flood in the area complete all specified and as directed. |
| 4 | Dewatering/desilting of existing manholes of internal size n exc 0.60mx0.60m depth n exc 1.50m and removing of all solid/semi-solid matter of silt residue both organic or inorganic in nature (manual or mechanical system at contractor\"s discretion)and incl removing RCC manhole Covers and refixing the same after cleaning the same position, complete all as directed by Engineer-in-charge. |
| 5 | Dewatering/desilting of existing manholes of internal size n exc 1.00mx1.00m depth exc 1.50m but n exc 3.00m and removing of all solid/semi-solid matter of silt residue both organic or inorganic in nature (manual or mechanical system at contractor\"s discretion)and incl removing RCC manhole Covers and refixing the same after cleaning the same position, complete all as directed by Engineer-in-charge. |
| 6 | Taking out thick/solid sludge (sedimented sand sludge/grit, ash rages, fibres and springe material etc) by mechanical process from septic tanks including inlet and outlet chambers and soakage well, removing and depositing the sludge outside MoD land in a pit and covering the sludge in the pit with earth and finally spraying unslaked lime, dry around the septic tank and covering the pit with earth complete all as directed and specified. Notes :- (i) Cost of earth work in the pit is deemed to be included in the unit rate quoted by the tenderer. (ii) Thick/solid sludge shall be measured under this item when it is not feasible by dewatering under ser item No 7 |
| 7 | De-watering of septic tanks and soakage wells, with mechanical pumping set and draining out the same disposal of sludge outside MoD land in pit to be dug out side and covering top with a layer of 25 mm thick earth filling compacting and levelling all as specified and directed by Engineer-in-Charge, complete all as directed and to the entire satisfaction of Engineer in-Charge. (i) Digging of pit shall be deemed to be included in unit rate. (ii) Contractor will maintain the hygenic condition in area all the time by taking suitable required measure. |
| 8 | M&L loose filling with brocken bricks of gauge 80 to 150 mm in sockege pits, sockage wells, complete all as specified. |
| 9 | Excavation in trenches not exc 1.5m width and n.exc 1.5 metre deep in hard soft/loose soil for foundation laying of pipes, wells, cesspits, manholes, pier holes & getting out, complete all as specified and directed by Engineer-in-Charge. |
| 10 | Returning filling in including spreading, levelling, watering and well ramming in layers not exceeding 25 cm all as specified and as directed. |
| 11 | Removing excavaed materials not exceeding 50 m and depositing where directed at a level not exceeding 1.5 m above the starting points (soils). |
| 12 | Demolition and breaking upto 200mm bore drain pipes ( SGSW /AC or reinforced concrete) set in cement concrete. |
| 13 | Demolition and breaking upto 150mm bore drain pipes ( SGSW /AC or reinforced concrete) set in cement concrete. |
| 14 | M&L Plain cement concrete (1:5:10), type E-2, using 40mm graded stone aggregate as infoundation, filling and mass concrete,complete all as specified and directed by Engineer-in-Charge. |
| 15 | M&L Plain cement concrete (1:3:6), type C-2, using 40mm graded stone aggregate as in bed to drain pipes of 200 mm bore including packing under and hunching against the sides of pipes after they are laid and tested, complete all as specified. |
| 16 | M&L Plain cement concrete (1:3:6), type C-2, using 40mm graded stone aggregate as in bed to drain pipes of 150 mm bore including packing under and hunching against the sides of pipes after they are laid and tested, complete all as specified. |
| 17 | Supply and fix reinforced concrete pipes class NP2 drain pipe 200 mm bore, ISI marked jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified |
| 18 | Supply and fix reinforced concrete pipes class NP2 drain pipe 150 mm bore, ISI marked jointed with cement mortar, laid in trenches and tested including fittings of same grade complete all as specified |
| 19 | Cutting into existing manhole for connecting new drain pipes of 150 mm internal dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required |
| 20 | Cutting into existing manhole for connecting new drain pipes of 200 mm internal dia, making good to pipes and rendering, cutting out existing benching for and forming branch channel (1/2 round or 3/4 section) in cement concrete 1:2:4 type B1 smooth finished, and reforming benching as required |
| 21 | Demolition of brick workbuilt in cement mortar incl all quoins, arched, pillars etc but excl ashlar facings, dressed stone work and precast concretecomplete all as specified and directed by Engineer - in - Charge. |
| 22 | M&L Brick work with sub class \"B\" Bricks, straight or curved on plan to any radius as in half brick thick wall in CM 1:4 completeall as specified and directed by Engineer - in - Charge . |
| 23 | M&L Brick work with sub Class ‘B’ bricks straight or curved on plan exceeding 6 mm mean radius built in cement mortar 1:4, complete all as specified. |
| 24 | Taking down cement plaster on brick walls or stone walls etc including raking out joints, hacking for key, scrubbing down with water etc., any description, including removal of rubbish outside MoD land, complete all as specified. |
| 25 | M & L rendering 15mm thick on fair faces of brick work or concrete surfaces in CM 1:4 finished even & fair without using extra cement all as specified and directed. |
| 26 | Supply only integral water proofing compound, complete all as specified. |
| 27 | Preparation of newly plastered surfaces of wall and applying two coats of cement base paint over a coat of cement primer complete all as specified and directed. |
| 28 | Demolition of cement concrete (unreinforced) of any description including cast-in-situ terrazzo (below or above ground level), not exc. 15 cm thickness, including removal of rubbish outside MoD land, complete all as specified. |
| 29 | M&L Plain cement concrete ( 1:2:4), type B-1, (using 20 mm graded stone aggregate) as in surface channels and drains, benching of manholes laid to shapeincluding necessary form works, complete all as specified. |
| 30 | M&L for PCC (1:2:4) type B0 (using 12.5mm graded stone aggregate) as in coping,benching etc including necessary form work, weathering, slightly rounded or chamfered angles and throating all as specified and directed by Engr-in-Charge. |
| 31 | Extra for forming fair finished drain or channels 30 cm inner grith in cement concrete, using extra cement incl form moulds mittred / stopped end etccomplete all as specified. |
| 32 | M&L cement concrete 1:3:6 type C-2 (40mm graded agg) 75 mm thick as in Plinth protection/and pavings finishing cement concrete surfaceeven and smooth without using extra cement complete all as specified and as directed |
| 33 | M&L for PCC (1:3:6) Type C-2 50 mm thick using 40 graded stone aggregate as in subbase of floor all as specified. |
| 34 | S&F Factory made machine pressed Chequered cement concrete colour tiles30 cm X30 cm X22 mm thick, with grey cement andpigments, set, jointed and pointed in neat cement slurry in floors , over 20 mm thickscreed bed in CM 1 :4complete all as specified and as directed. |
| 35 | M&L for Machine pressed precast concrete interlocking paver block any shape and size confirming to IS 15658-2006 of 80 mm thickness M-35 Gradecomplete all as specified and directed. |
| 36 | M&L for Sand (M Sand) filling under interlocking tiles or in foundations, spread and levelled including watering and consolidation complete. |
| 37 | S&F SFRC manhole cover 75 mm thick factory made with plain surface as per requirement including 75 mm x 1.55 mm flat iron frame all around the cover all as specified. |
| 38 | S&F in repairs steel rolling shutter 1.25 mm thickness of laths without ball bearing as specified incl top cover archoring rod, hasp & staple and shop coat of primer erected in position as indicated complete push pull or manual type including taking down of old shutter completeall as specified and directed by engineer in charge. |
| 39 | - Ditto - but gear operated type with bevel gear box and crank handle. |
| 40 | S&F sefty lever lock MS with 04 levers for rolling shutters complete all as specified and directed by engineer in charge. |
| 41 | S&F ball bearing for rolling shutters complete all as specified and directed. |
| 42 | M&L greasing and servicing (overhauling) of steel rolling shutter of manual type of any size incl greasing and survives of ball bearing,hood cover anchoring rod hasp and staple completeall as specified and directed by engineer in charge. |
| 43 | M&L greasing and servicing (overhauling) of steel rolling shutter of gear operated type of any size incl greasing and survives of ball bearing,hood cover anchoring rod hasp and staple completeall as specified and directed by engineer in charge. |
| 44 | Dismantling Asbestos cement sheet (corrugated, semi corrugated etc) in roof coverings complete all as specified. |
| 45 | M&L for Pre-painted galvatume aluminum zinc coating GI based corrugated/ Plain steel sheet 0.50mm thick of any colour having tensile strength of 550 Mpa as in roof covering/cladding to wall, fixed with self tapping screws allas specified and as directed. |
| 46 | S&F in repair false ceiling with exposed GI system using “SILHOUETTE XL 15 mm (Nominal) designer Grid \"Armstrong\"white or Global white with black reveal and 600 x 600 x 15 mm thick prime fine fissured micro look white/coloured tiles (superfine 15mm/silhouette). Making necessary framework for AC ducting, if any and necessary cutouts for diffusers and light fittings, taping and finishing to proper line & level and incl dismantling old undervicable false ceillingcomplete all as per manufacturer’s instructions and as directed. |
| 47 | Dismantiling posts (or) struts (wood), RCC (or) steel any section , including taking out embedded portion and making good distrubed ground concrete brick work masnory etc.., all as specified and as directed. |
| 48 | Dismantling of Wrought iron (or) mild steel work ,of any descriptionn not otherwise prasided complete all as specified and as directed. |
| 49 | Excavating in post holes each n.exc 0.50 cum getting out hard dence soil including returning filling in and ramming earth or broken rubble mixed with earth around ,in layers n.exc 25 cm ,watering and removing surplus soil to a distance n.exc 50 mtr and making good surface complete all as specified and as directed. |
| 50 | Material and labour for plain cement concrete1:2:4 type B2, using 40mm graded stone aggregate as in foundation, filling and mass concrete all as specified and as directed. |
| 51 | S/F Joist, channel, angle or tee sections, post fixed independently, without connecting plates, etc(cut to ordinary lengths i.e within 20mm of the length indicated quality conforming to Fe 410-W(gde-E-250)quality-A complete all as specified and as directed. |
| 52 | S&F for MS flat iron fillets in posts and struts in fencing ,drilling holes (for securing wire mesh etc),including necessary drilling ,bolting or riveting etc confirming to Fe 410-0 or fe 310-0 complete all as specified and as directed. |
| 53 | Dismantling fencing wire mesh any type complete all as specified and as directed. |
| 54 | Supply only Chain link MS galvanised fencing, any size (or) type of 3mm to 4mmdia wire complete all as specified and as directed. |
| 55 | Fixing only chain link fencing including line wires, any mesh, size and type toany type of standards, rails, straning bolts, etc. including provision of binding wire complete all as specified and as directed. |
| 56 | S & F 5 to 10mm mild steel in flat, round (or) square bars, in available length FE 410 W (GDE- E- 250) quality A complete all as specified and as directed. |
| 57 | S&F mild stell screw bolts of 11 to 15 mm diameter of shank (machine made ) with hexagonal or squre heads at one end and screwed the other ,each screwed end to to be fitted with washers and one hexagonal or squre nut , exceeding 5 cm and not exceeding 10 cm long complete all as specified and as directed. |
| 58 | S & F in Framed work as in doors or gates of angle or other section with gusset plates, rails, braces, etc., complete, drilled for fixing of steel sheeting or other covering. Doors, etc. to be prepared for hanging or sliding with and including either hooks and hinges or steel hanging door fittings (exclusive of steel sheeting or other covering, running rails and guides) and hanging; also fastening and fixing complete conforming to FE 410-W(Gde -E-250) quality-A all as specified and as directed. |
| 59 | Dismantling , steel barbed wire any type complete all as specified |
| 60 | S & F Galvanised 2 strand, steel barbed wire 2.24 mm dia, barbed with 2mm dia barbs at 75mm spacings and straining and fixing to any type of standard rails straining bolts, including, securing or tying at crossings with and provision of galvanised mild steel wire, staples or steel pins etc as specified and directed (each line wire to be measured) |
| 61 | S&F in repairspunched tape concertina coil 900mm coil dia size of any type of standards, rails etc including provision of mild steel (annealed) binding wirecomplete all as specified and directed & by Engineer-in-Charge. |
| 62 | M&L for preparing new steel surfaces and applying two coat of synthetic enamel paint over a coat of red oxide primer on steel surfaces of any description over 10 cm width or girth incluidng necessary preparation of surface all as specified and directed. |
| 63 | M&L MS TMT bars 10 mm dia and over, cut to length, bent to shape required, including cranking, bending spirally for hoping for columns, hookingends and binding with mild steel wire (annealed ) not less than 0.9 mm dia all as directed and specified. |
| 64 | Demolition of Stone slabs and tiles of any description or thickness in floors, aprons etc. |
| 65 | M&L for Granitestone slab in flooring of approved colour 16-18 mm thick machine cut, leather finished, bedded and jointed with grey cement slurry and pointed with white cement with admixture of pigment to match the shade of granite stone, laid over and including 20mm thick screed bed in CM (1 :4) complete all as specified and directed by Engr-in-Charge. |
| 66 | Labour only for making hole in granite and RCC slab for gas connection pipe as required dia including necessary mechinery complete all as specifies and as directed. |
| 67 | Dewatering the PVC water tank of capacity upto 500 ltrs cleaning and removing all scales and dirt etc by scraping with hard plastic/nylon wire brush, removing lid without distrubing pipe line system and float valve/refixing of float valve and making functional after cleaning and writing letter \"Tank cleaned on_____ (date, month and year)” boldly with thick white/black/yellow synthetic enamel paint including cleaning of existing letter complete all as specified and as directed . |
| 68 | Dewatering the PVC water tank of capacity of 1000 ltrs cleaning and removing all scales and dirt etc by scraping with hard plastic/nylon wire brush, removing lid without distrubing pipe line system and float valve/refixing of float valve and making functional after cleaning and writing letter \"Tank cleaned on_____ (date, month and year)” boldly with thick white/black/yellow synthetic enamel paint including cleaning of existing letter complete all as specified and as directed . |
| 69 | Dismantling RCC or PVC water tanks of capacity exc 250 & n. exc 500 litres complete all as specified and as directed |
| 70 | Dismantlingwatertanks Capacity of tank exc500 & n. exc 1000 ltrs removing complete all as specified and as directed |
| 71 | Supply and fixingrotational moulded polyethylene three layered water storage tanks 500 litres capacity (cylindrical,vertical with closed top) hoisted and fixed in position all as specified and as directed. |
| 72 | Supply and fixingrotational moulded polyethylene three layered water storage tanks 1000 ltrs capacity (cylindrical,vertical with closed top) hoisted and fixed in position all as specified and as directed. |
| 73 | S & F in repair for Ball brass valves, high pressure, with polythene float and flynut complete, screwed for iron pipe or brass ferrule and fixed,Bore dia of pipe in 20 mm, etc complete all as specifed and directed. |
| 74 | S&F in repairs 20mm dia gun metal gate valve, with iron wheel head, screwed both ends for iron pipes complete all as directed by Engr in Charge. |
| 75 | Taking up or down steel tubing and connections 15mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 76 | Taking up or down steel tubing and connections 20mm dia pipes including cleaning for refixing or removal to store complete all as specified and as directed. |
| 77 | S & F 15 mm bore Galvanized Steel tubes, medium grade with all fittings forwater supply pipes etc., laid in trenches/fixed on walls. |
| 78 | S & F 20 mm bore Galvanized Steel tubes, medium grade with all fittings forwater supply pipes etc., laid in trenches/fixed on walls. |
| 79 | Refixing old steel tubing and connections 15mm dia in new or old position (walls, ceiling, floors etc). |
| 80 | Refixing old steel tubing and connections 20mm dia in new or old position (walls, ceiling, floors etc). |
| 81 | Cutting chases, pinning in. making good to facings where required and pointing in cement mortar 1:3 to ends or edges of landings, steps, cills, sunshades, shelves, lintels, etc.; and cutting chases for concealed water tubing or concealed conduit wiring, etc., and making good, cutting not exceeding 10 cm girth, including removal of rubbish outside MoD land complete all as specified. |
| 82 | Demolition of floor &hearth wall tiling including cement motar bedding of any description laid bedded and pointed all as specified and as directed. |
| 83 | M&L ,nonskid coloured ceramic tiles 7mm thick areaof each tiles exeeding 0.06 sqm but not exceeding 0.11 sqm in floors etc. set and jointed neat cemet slury and pointed in coloured cement to match over and including screed bed 15 mm thick in cement motar 1:6 complete all as specified and as directed. |
| 84 | M & L first quality white glazed ceramic, tiles fixed in pattern of different colour including border of size300x450x7 mmthick as in vertical surfaces such as dado/skirting, set and jointed in neat cement slurry and pointed in white or coloured cement to match with colour of tiles laid on and including 10 mm thick rendering in cement mortar (1:3), including pointing in white cement with pigment to match the shade of tiles, complete all as specified and directed. Note :- Pattern of the tiles will be decided by GE at the time of execution. |
| 85 | S&F in repairs Vitreous China wash down water closet pan (pedestal pattern), colour white, closed pattern with flat bottom and seat cover and mild steel chromium plated or aluminised hinging device and P/S trap including connections to drain(or outgoing pipe) andincluding taking down complete all as specified and as directed. |
| 86 | S&F in repairs, vitreous china water closet squatting pan orissa pattern, 580 x 450 mm size with integral foot rests, colour white and P-trap including connections to drain(or outgoing pipe), lime concrete bedding complete all as specified and as directed. |
| 87 | S&F in repair PVC valveless, syphonic action type, 10 Ltr capacity,flushing cistern low/high level, white with inlet, ball valve, float and handle including brackets and connections and including taking down complete all as specified and as directed. |
| 88 | S&F in repair wash basins, vitreous china of size 550 x 400 including cutting for and pinning in ends of brackets or erecting stand, inclusive of fixing of supply and waste pipe 32 mm bore, bottle trap, 15 mm bore pillar tap, 450 mm long PVC connections with PTMT unions, etc complete all as specified and as directed. |
| 89 | S&F in repair Vitreous China Urinal, Half stall type, white (excluding flushing cistern)including providing and fixing plugs, bedding urinal against wall in cement mortar 1:2, securing urinal to plugs with and including 60mm long brass screws, pointing around urinal back in cement; fixing flush pipe, urinal spreader, grating,waste pipe and Union for discharge pipe.Make : Jaquar/Parryware/Hindware or equivalent. |
| 90 | S/F in repairs seat cover for pedestal pan white closed pattern with flat bottom, and cover and mild steel chromium plated or aluminised hinging device. |
| 91 | S/F in repairs bib taps cast copper alloy fancy type screwed for iron pipes 15mm chromiuim plated complete all as specified and as directed. |
| 92 | S/F in repairs Pillar taps(long thread) cast copper alloy fancy type 15mm thick long thourght complete all as specified and as directed. |
| 93 | M&L for preparation of old surfaces of walls by washing rubbing down and stopping of surface and applying one coats of cement base paint complete all as specified and directed. |
| 94 | M&L for reparation of old surfaces of walls including brooming down or steel wire brushing; scrapping down smoke soot, moulds, moss and efflorescent salts and trading oil and greasy spots etc.; rubbing down and stopping of surfaces using sand paper and applying one coat of oil bound distemper, complete all as specified and directed. |
| 95 | M & L forcomplete removal of existing treatment from old plastered surfaces of walls and applying two coats of Asian paints Royale Shyne paint (coloured/white) over a coat ofdeco prime primer over and including one coats of wall care putty with brush/roller, finished even and smooth complete all as per manufacturer\"s instruction and as directed by GE. |
| 96 | Taking down PVC/CI pipe jointed in cement mortar taking out of wall up to 110mm dia all as specified and directed |
| 97 | S&F110 mm bore PVC (SWR) pipessingle socketed in any length with rubber ring joints fixed to walls/trenches complete all as specified and as directed. |
| 98 | S&F110 mm bore PVC (SWR) bends with access door complete all as specified and as directed. |
| 99 | S&F 110 mm bore PVC (SWR) bends any radius complete all as specified and as directed. |
| 100 | S&F110 mm bore PVC (SWR) branch piece with access door, single (single T) equal or unequal complete all as specified and as directed. |
| 101 | S&F 75 mm bore PVC (SWR) pipes single socketed in any length with rubber ring joints fixed to walls complete all as specified and as directed. |
| 102 | S&F 75 mm bore PVC (SWR) bends with access door any radius complete all as specified and as directed. |
| 103 | S&F 75mm bore PVC (SWR) bends any radius complete as specified and as directed. |
| 104 | S&F 75mm bore PVC (SWR) junction single, (Single T) equal or unequal with access door complete as specified and as directed. |
| 105 | S&F 110mm bore PVC (SWR) junction single, (Double Y) equal or unequal with access door complete as specified and as directed. |
| 106 | S&F 110mm bore PVC (SWR) junction single, (Single Y) equal or unequal with access door complete as specified and as directed. |
| 107 | S&F 110mm x 75 mm bore PVC (SWR) reducers complete all as specified and as directed. |
| 108 | S&F 75mm bore PVC (SWR) vent cowl complete as specified and as directed. |
| 109 | S&F110 mm bore PVC (SWR) vent cowl complete as specified and as directed. |
