|
| 1 | Supply and fixing of freezer assembly with evaporating coil for refrigerator of capacity upto 165/170/190 ltrs including shouldring to copper pipe tec. Charging of refrigerant gas, complete all as specified and directed by Engineer-in-Charge |
| 2 | Supply and fixing in replacement freezer assembly with evaporating coil for Refrigerator of capacity 286/310/320/308/425 ltrsincluding shouldring to copper pipe tec. Charging of refrigerant gas, complete all as specified and directed by Engineer-in-C harge |
| 3 | Disconnection old defective burnt sealed compressor unit of refrigerator/Deep freezer 286/310/320/308/425 ltrs capacity of any make and supply and fixing in replaceent of same with new sealed compressor unit including soldering of copper pipe, foundation rubber bushes,nut bolts, cleaning of refrigerant system and charging of of refrigerant gas and testing , complete all as specified and directed by Engineer-in-C hargeMake : KIRLOSKAR/KELVINATOR/GODREJ/LG/ existing make |
| 4 | Disconnection old defective burnt sealed compressor unit of refrigerator upto 190 ltrs capacity of any make and supply and fixing in replaceent of same with new sealed compressor unit including soldering of copper pipe, foundation rubber bushes,nut bolts, cleaning of refrigerant system and charging of of refrigerant gas and testing , complete all as specified and directed by Engineer-in-C hargeMake : KIRLOSKAR/KELVINATOR/GODREJ/LG/ existing make |
| 5 | Supply and fixing of starting relay assembly suitable for refrigerator/Deep freezer 160/290/310/320 ltrs capacity. In replacement of old relay assembly complete all as specified and directed by Engineer-in-C harge |
| 6 | Supply and fixing of over load protectionsuitable for refrigerator/Deep freezer 160/290/310/320 ltrs capacity. In replacement of old unsv over load protection complete all as specified and directed by EIC |
| 7 | Supply and fixing of thermostat switch suitable for refrigerator of any make and capacity as per existing including taking down unserviceable complete all as specified and directed by Engineer-in-C harge |
| 8 | Supply and fix in replacement complete defrosting assemblyfor any size and make refrigrator including taking down unserviceable as per directed. |
| 9 | Supply and replace lamp suitable for existing make of refrigerator on ground. |
| 10 | Supply and replacepush type door switch suitable for refrigerator ofany cap /make. |
| 11 | Supply and fix in replacement flexible elastic strip seal/gasket for refrigerator door suitable for any size and make including taking down unserviceable as per directed. |
| 12 | Cleaning of gas system with CTC vaccum pump and charging the refrigerant R-134a/as per existing with antimoist substance and filter along with rectification of leakage in the system of 165/170/190ltrs capacity refrigerator, complete all as specified and directed by Engr-in-Charge. |
| 13 | Cleaning of gas system with CTC vaccum pump and charging the refrigerant R-134a/as per existing with antimoist substance and filter along with rectification of leakage in the system of 286/310/320/308/425ltrs capacity refrigerator/Deep freezer, complete all as specified and directed by Engr-in-Charge. |
| 14 | Supply and fixing of push cock Brass chromium palted 15 mm bore, including taking down of old push cock, complete all as specified and directed by Engr-in-Charge. |
| 15 | Supply and fixing of 15 mm bore PTMT float valve assembly with PVC float for water cooler including taking down of old Valve, complete all as specified and directed by Engr-in-Charge |
| 16 | S&F combination of any type of relay assembly complete suitable for water cooler40/80 litrs capacity in replacement of old relay unit, complete all as specified and directed by Engr-in-Charge |
| 17 | Supply an fixing of overload protectorin replacement of of old protector including clip suitable for water cooler complete all as specified and directed by Engr-in-Charge. |
| 18 | Supply and fixingof starting capacitor 50 +/- 5% mfd suitable for water cooler in replacement of old capacitor, complete all as specified and directed by Engr-in-Charge |
| 19 | Supply and fixing of running capacitor upto 10 mfd suitable for compressor of water cooler/blower motor of any type AC in replacement of old capacitor, complete all as specified and directed by Engr-in-Charge |
| 20 | Supply and fixing of condensor coil suitable for water cooler 40/80 trs capacity as per existing size in replacement of old coil ,complete all as specified and directed by Engr-in-Charge. |
| 21 | Supply and fixing thermostat switch suitable for water cooler including knob plate and screw, in replacement of old thermostat switch, complete all as specified and directed by Engr-in-Charge. |
| 22 | Supply and fixing of condensor fan motor 1/5 HP including blades suitable for water cooler, in replacement of old motor, complete all as specified and directed by Engr-in-Charge. |
| 23 | Disconnecting of old defective burnt sealed compressor unit of water cooler of any capacity and supply and fixing in replacement of same with new sealed compressor unit including soldering of copper pipes, foundation of rubber bushes, nut bolts cleaning the refrigerant system, charging of compressor oil and refrigerant gas and testing, complete all as specified and directed by Engr-in-Charge. Make : KIRLOSKAR/GODREJ/LG/KELVINAT/ existing make |
| 24 | Preparation of old painted surfaces and applying one coat spray painting of synthetic enamel paint(colour as approved) outside and two coat of black bituminous paint inside of water cooler of any make after removal of all dust and all foreign matter with the help of sand paper and rubbing with cleaning compound, complete all as specified and directed by Engr-in-Charge. |
| 25 | Rewinding of fan motor of water cooler 40/80 ltrs capacity any make with super enameled copper wire or as per required including wornout bushes etc and testing after complete as per directed |
| 26 | Supply and fixing of PVC fan blade ofmotor of water cooler suitable for any make and capacity in reolacement of old fan blade, complete all as specified and directed by Engr-in-Charge. |
| 27 | Testing of water cooler, cleaning the gas system with CTC of nitrogen vacuming properly and charging the refrigerant R-134a/as per existing required including the cost of gas filters/ rectification of leakage in entire system and making the gas system leak proof to the entire satisfaction of Engr-in-Charge, complete all as specified and directed by Engr-in-Charge. |
| 28 | S&F in replacemntcapillary tube made of copper any size suitable for Refrigerator/Water cooler/Deep freezer including taking out unsv capillary tube complete all as specified and directed. |
| 29 | Maintenance, servicing and testing of splittype AC, capacity upto1.50/2 tons, any make, by cleaning cooling coil, condenser fins, blowing of dust from machines/air filters cleaning with VINICLEAN solution using pressure jet system with water , checking and decarbonising all electric system oiling/greasing of blower motor, checking and removing any vibration and leakage in the equipment including checking/repair to inter locking device for winter/summer to ensure cutting off of compressor/heating in case of failure of blower motor including taking down and refixing in position complete all as directed by Engineer-in-Charge.Note - (I) Cost of minor repair, replacement of petty items such as nuts, bolts, washers, screws, rubber mounting pads of compressor etc is deemed to be inclusive in the unit rates quoted by the contractor. |
| 30 | Ditto All as per item no 50 above but for window Ac capacity 1.5/2.0 ton complete all as specified and direced by Engr-in-Charge. |
| 31 | Testing of Window AC 1.5/2.0 ton , cleaning the gas system with CTC of nitrogen vacuming properly and charging the refrigerant R-134a/as per existing required including the cost of gas filters/ rectification of leakage in entire system and making the gas system leak proof to the entire satisfaction of Engr-in-Charge, complete all as specified and directed by Engr-in-Charge. |
| 32 | Testing of Split AC 1.5/2.0 ton , cleaning the gas system with CTC of nitrogen vacuming properly and charging the refrigerant R-134a/as per existing required including the cost of gas filters/ rectification of leakage in entire system and making the gas system leak proof to the entire satisfaction of Engr-in-Charge, complete all as specified and directed by Engr-in-Charge. |
| 33 | Supply and fixing in replacementprinted circuit board(PCB) kit for Split/window type ac of any type complete all as specified and directed by Engr-in-Charge. |
| 34 | Supply and fixing in replacementstarting capacitor clip type of cap. 80-100 MFD,440 suitable for 1.5/2 Ton capacity window/Split type AC complete all as directed by Engineer-in-Charge |
| 35 | Supply and fixing in replacementstarting capacitor clip type of cap. 120 MFD,440 suitable for 1.5/2 Ton capacity window/Split type AC complete all as directed by Engineer-in-Charge |
| 36 | S&F in replacement ofrunning capacitor, 40 to 60 MFD suitable for 1.5 / 2.0 Ton capacity window/split type AC of approved |
| 37 | Supply and charging gas refrigerant R-22/134a or as per existing to window/split type AC upto 2 ton capacity including removing of leackage if any and testing complete all as specified and directed by Engr-in-Charge. |
| 38 | Supply only in replacement starting relay suitable for 1.5/2.0 ton capacity Ac complete all as specified and directed |
| 39 | Supply only in replacement over load protector relay suitable for 1.5/2.0 ton capacity Ac complete all as specified and directed |
| 40 | Supply only in replacement thermostat switch suitable for 1.5/2.0 ton capacity Ac complete all as specified and directed |
| 41 | S&F, in replacement, new compressor for window type AC 1.5 Ton capacity suitable for exsiting make including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping the water vapour ensuring leak proof system complete all as specified and directed.Make: Shriram/ Kirloskar/Voltas/Carrier/Whirlpool |
| 42 | S&F, in replacement, new compressor for window type AC 2 Ton capacity including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping the water vapour ensuring leak proof system complete all as specified and directed.Make: Shriram/ Kirloskar/Voltas/Carrier/Whirlpool |
| 43 | S&F, in replacement, new reciprocating type compressor for 1.50 Ton capacity including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping the water vapour ensuring leak proof system complete all as specified and directed.Make : Shriram/Kirloskar/Voltas/Carrier/Whirlpool/existing make |
| 44 | S&F, in replacement, new reciprocating type compressor for 2.0 Ton capacity including disconnecting, opening up, taking out burnt compressor by cutting/opening the pipe connections, fixing in position, reassembling, testing and commissioning including gas & oil charging after flushing the line with CO2 gas to avoid trapping the water vapour ensuring leak proof system complete all as specified and directed.Make: Shriram/ Kirloskar/Voltas/Carrier/Whirlpool/existing make |
| 45 | M&l for dismentling of existing air conditioner any type and capacity from its existing position complete and refixing the same at other location including charging of gas if required complete as per directed by Engr-in-Charge. |
| 46 | Supply only in replacement wiring kit suitable for 1.5/2.0 ton capacity AC complete all as specified and directed. |
| 47 | Supply and fix in replacement air filter synthetic/nylon as per existing size and shape suitable for 1.5/2.0 ton capacity window Acs complete all as specified and directed. |
| 48 | Supply and fix in replacement air filter synthetic/nylon as per existing size and shape suitable for 1.5/2.0 ton capacity split type Acs complete all as specified and directed. |
| 49 | Supply and fix in replacement of new fan motor (indoor/outdoor)1/4, 1/5 HP single/double shaft as per existing model suitable for split type AC 1.5/2.0 ton complete all as specified and directed. |
| 50 | Materials and labour for rewinding of fan motor Suitable for AC upto 2.0 Ton capacity with super enameled copper winding wire of same guage including replacement of insulation materials bushes and shafts complete all as specified and directed. |
| 51 | Supply only in replacement of condensor fan blade made out of aluminium/plastic suitable for upto 2 ton capacity Window type Acs complete all as specified and directed. |
| 52 | Supply only in replacement of condensor fan blade made out of aluminium/plastic suitable for upto 2 ton capacity Split type Acs complete all as specified and directed. |
| 53 | Supply only against in replacement of evaporating air blower completemade out of aluminium/plastic suitable for upto 2 ton capacity Window type Acs complete all as specified and directed. |
| 54 | Supply only against in replacement of evaporating air blower complete made out of aluminium/plastic suitable for upto 2 ton capacity Split type Acs complete all as specified and directed. |
| 55 | Supply and replace selector switch suitable for window type AC cap 1.5/2.0 ton as per existing sample. |
| 56 | Supply and replace front PVC grill suitable for window type AC cap 1.5/2.0 ton as per existing sample. |
| 57 | M&L for replacement of synthetic rubber tube insulaton of thickness 9 mm & suitable for internal diameter 6.0 mm (1/4\") for refrigerant copper piping of split AC units complete all as specified and directed. |
| 58 | All as per item no 78.00 but internal dia 13 mm (1/2\") complete all as specified and directed. |
| 59 | Supply only copper tubing heavy duty inner dia 6.0 mm (1/4\") for refrigerant For AC Complete all as specified and directed. |
| 60 | Supply only copper tubing heavy duty inner dia 13 mm (1/2\") for refrigerant For AC Complete all as specified and directed. |
| 61 | Supply only copper tubing heavy duty inner dia 3/8\" for refrigerant For AC Complete all as specified and directed. |
| 62 | Supply only copper tubing heavy duty inner dia5/8\" for refrigerant For AC Complete all as specified and directed. |
| 63 | Supply and fixing in replacement, external/outdoor unit complete including compressor for split type AC 1.5/2.0 Ton capacity, complete all as specified and directed by Engineer-in-Charge. |
| 64 | Supply and fixing in replacement, internal/indoor unit complete including compressor for split type AC 1.5/2.0 Ton capacity, complete all as specified and directed by Engineer-in-Charge. |
| 65 | Supply and replace remote controller suitable for split type/Window type AC cap 1.5/2.0 ton as per existing of any make any model |
| 66 | Supply and fixing of copper condensor coil suitable for Split AC 1.5/2.0 Ton capacity as per existing size in replacement of old coil ,complete all as specified and directed by Engr-in-Charge. |
| 67 | Supply and fixing of copper condensor coil suitable for Window AC 1.5/2.0 Ton capacity as per existing size in replacement of old coil ,complete all as specified and directed by Engr-in-Charge. |
| 68 | Maintenance and repair for inbuilt RO system in storage type water cooler for capacity 40/80/100 ltr storage including supply and replacement of complete Sadimentation filter, carbon filter, precarbon filter, SMPS, diapharm pump (pressure pump), controll switch, auto control switch flow pipe in any length, connector and any small parts incl PVC pipe etc all as specified and directed. |
| 69 | S&F in replacement of drain water outHose pipe for split type ac Complete all as directed by Engr-in Charge. |
| 70 | Maintenance, servicing and testing of WATER COOLLER , capacity 40/80,60/120LTRS, any make, by cleaning cooling coil, condenser fins, blowing of dust from machines cleaning with VINICLEAN solution using pressure jet system with water , checking and decarbonising all electric system oiling/greasing of motor, checking and removing any vibration and leakage in the equipment Note - (I) Cost of minor repair, replacement of petty items such as nuts, bolts, washers, screws, rubber mounting pads of compressor etc is deemed to be inclusive in the unit rates quoted by the contractor. |
