}

Tender For Special Repairs To Road At Rangapahar Military Station, Rangapahar-Nagaland

Military Engineer Services has published Tender For Special Repairs To Road At Rangapahar Military Station. Submission Date for this Tender is 05-06-2025. Road Work Tenders in Rangapahar Nagaland. Bidders can get complete Tender details and download the document.




Tender Notice

49054173
Tender For Special Repairs To Road At Rangapahar Military Station
Open Tender
Indian
Nagaland
Rangapahar
05-06-2025

Tender Documents

Tender Details

Tender For Special Repairs To Road At Rangapahar Military Station; 1 Material and labour for repairs to potholes of depth n.exc 30mm and area not exc 1 Sqm each including sweeping free from dust and mud, or water, scoring sunken surfaces in roads, paths, etc. cutting around edges to at least 25mm in depth, making good by applying tack coat @ 5 Kg per 10Sqm (VG-10), putting in premixed bituminous macadam, well rammed and sealed with binder 9.80 kg per 10 sqm (using paving bitumen VG-30), binded with 0.09 cum of stone chippings, 6.30 mm size and again well rammed (including supply of premixed macadam, binder and chippings), rolled with smooth wheeled power roller 8 to 12 tonne and compacted to required camber and gradient and finishes to a uniform and smooth surfaces complete all as specified and as directed. 2 Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat withbituminous primer(VG-10) @ 2.5 Kg per 10Sqm complete all as specified and as directed. 3 Material and labour for preparing black top surfaces by brushing with wire brushes for removing caked mud etc. sweeping with brooms and finally fanning the cleaned surface with gunny bags to remove all loose dirt etc. and applying evenly a priming/ tack coat withbituminous primer(VG-10) @ 5 Kg per 10Sqm complete all as specified and as directed. 4 Material & labour for premix bituminous macadam of coarse aggregate (50 to 20mm),using paving bitumen of VG-30 grade @ 4% by weight of total mix, mixed in hot mix plant and laid by mechanical paver finisher, rolled and compacted to required gradient and camber, consolidated thickness not exceeding 50mm complete all as specified and directed. Note: The premix bitumen will be laid as in levelling course in suknen/ damaged road patches as per site requirement. 5 Material and labour for bituminous premix semi-dense asphaltic concrete 40mm consolidated thickness with 5.5% paving bitumen grade VG-30 as a binder content by weight of total mix and grading of aggregates & design criteria as specified in SSR Part-I clause No 20.B.2.5.4(d) & 20.B.2.11 and mix at hot mix plant, spread with mechanical paver rolled and consolidated to gradient and camber with power roller 8 to 12 tonne and all as specified in para 20.B.4 & sub para 20.B.4 of MES Schedule Part-I complete all as specified and as directed.Note: (i) For job mix formula design purpose maximum binder shall be as described i.e. 5.5% for VG-30 grade bitumen.(ii) No price adjustment shall be applicable if the approved quantity of binder as per design mixed is more than 5.5%. (iii) During design stage if binder content used less than 5.5% necessary price adjustment on quoted rate shall be done as per actual binder content used.(iv) Design to be got approved from GE 6 Supply and fixing cat eye solar reflective type of metal body alloy of size 100mm x 100mm x 20mm with PAMA striplens reflector fixed with and incl MS stud of suitable size as per manufactures instructions. 7 Supply and fixingsolar cat eye aluminum alloy shall (100% water proofing design according to 65) of size 125mm x 125mm x 25mm (shank 65mm) of high efficiency Mono rystafie solar panel 2.4V/ 0.3 watt one NI-ed rechargeable battery (1.2V/ 1600MA) consisting of super bright LED with 10,000 to 18,000 mcd completed as per manufactures instructions etc. all as specified and directed 8 Material & Labour for Road Marking Strips, Lines, Dashes, Arrows, Letters etc of 2.5 mm thick [Reflective Type] of approved colour conforming to BS 3262-1989 on roads, pavements and the like not exceeding 10cm wide with Hot Thermo Plast material by fully automatic thermoplastic paint applicator machine, fitted with profile shoe, glass beads dispenser, propane tank heaters and profile shoe heater, driven by skilled operator on road surface complete as per MoRT & H specifications including cleaning the road surface of all dirt, scales, oil grease and foreign materials etc complete all as specified and as directed. 9 Material & Labour for Moorum/red bajri filling in floors or pavings, laid in layers n exc. 15 cm thick, spread, levelled and rammed including watering complete all as specified and as directed.

Key Value

Document Fees
INR 1000 /-
EMD
INR 170500.0 /-
Tender Value
INR 97 Lakhs /-

Attachment

FileName File Description File Size
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Click here to download tender document Tender Documents 0 KB
Disclaimer :
We takes all possible care for accurate & authentic tender information, however Users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender.
Tell us about your Product / Services,
We will Find Tenders for you

Copyright © 2025 · All Rights Reserved. Terms of Usage | Privacy Policy

For Tender Information Services Visit : TenderDetail