|
| 1 | S&F 10-12mm thick 1st class softwood (Australlian) wooden panellingfixed with tounged and grouted wall panelling and including fillets/ cornices fixed over and including 9mm thick plywood fixing on wall andfinishing two coats of warnishing, polishing and prerparation with sneezing,including dismantling old existing boardings, complete all as specified and directed.Note:- Taking up/ down and refixing of electric fittings & wiring during execution of work shall be responsibility of the contractor and cost for the same shall deemed to be included in the quoted rate and nothing extra shall be admissible to the contrctor on this account. |
| 2 | S&F khatamband pattern false ceiling, design as approved by GE with ornamental wood work made out of 1st class soft wood (Deodar) including fillets/ cornices fixed over and including 12mm thick BWR plywood and finally finishing with french polish (two or more coats), including dismantling old existing boardings, complete all as specified and directed.Note:- Taking up/ down and refixing of electric fittings & wiring during execution of work shall be responsibility of the contractor and cost for the same shall deemed to be included in the quoted rate and nothing extra shall be admissible to the contrctor on this account. |
| 3 | M&L for 6mm thickNon Asbestos fibre cement/Pre laminated self embossed texture designer reinforced multipurpose E-Board classic 600x600mm, HSPC (high pressure steam cured) to be fixedor inserted to pre laminated GI frame work for seamless ceiling size 600x600mm with main runner38x24x0.9mm thick, cross tee 8.6x0.9mm and wall angle 19x19x0.9mm duly suspended with 6mm dia GI wire hangers 1200mm centre to centre both ways fixed with steel dash fasteners or from purlin and from the roof with alignment clip, including dismantling wall and ceiling boards (fibre, pulp, insulation, etc.), complete all as specified and directed. |
| 4 | M&L for wooden laminated flooring in strips 1200x200x6 to 8mm thick having fire rating class B1 fixed over PVC sheet and cushion over 12mm thick plywood grade BWR type BB 5 Nos of Ply fixed with nails to timber includingbeading/ cornices and tee required all as per manufacturer\"sinstructions and directions including dismantling of old flooring, complete all as specified and directed. |
| 5 | M&L for glazed ceramic coloured tiles in vertical surface of size 350x250x7mm /450x300x7mm thick, best quality etc., set and jointed in neat cement slurry and pointed in white cement or coloured cement to match the shade of tiles, over and including 10 mm thick rendering/ backing coat in CM (1:4), including dismantling of old existing floor, hearth or wall tiling,complete all as specified and directed. |
| 6 | M&L for non skid ceramic coloured tiles, 7-8mm thick (square/rectangular), area of each tile exc 0.06 sqm but not exc 0.11 sqm as in floors etc., set and jointed in neat cement slurry and pointed in white or colouredcement to match the shade of tiles, laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), including dismantling old existing floor, hearth or wall tiling,complete all as specified and directed. |
| 7 | M&L for vitrified ceramic dark shade tiles, 10mm thick (square/rectangular) polished, area of each tile n. exc 0.36 sqm, as in floor etc, set and jointed in neat cement slurry and pointed in white or coloured cement to match the shade of tiles, over and including 15 mm thick screed bed or bedding layer in CM (1:4), including dismantling old existing floor, hearth or wall tiling,complete all as specified and directed. |
| 8 | M&L for Non-skid ceramic coloured tiles as in floor of size 600x600x 8 to 10mm thick etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile laid over and including 15 mm thick screed bed or bedding layer in CM (1:4), including dismantling old existing floor, hearth or wall tiling complete all as specified and directed. |
| 9 | M&L for ceramic glazed coloured tiles on wall 600x300x 7 to 8mm thick etc set and jointed in neat cement slurry and pointed in white or coloured cement to match with shade of tile laid over and including 10mm thick rendering/ backing coat in CM (1:4), including dismantling old existing floor, hearth or wall tilingcomplete all as specified and directed. |
| 10 | M&L for 2nd class hard wood clean sawn scantling as in timber framed and fixed work, including dismantling timber scantling 40 sqcm and over in section in any position as in framed work complete all as specifiedand directed. |
| 11 | M&L for preparation of new or previously untreated wood and wood based surfaces of any description not otherwise described, exc 10cm in width or girth and applying two coats of synthetic enamel paint over a coat of pink primer, complete all as specified and directed. |
| 12 | S&F 110mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or in floors, including dismantling of old existing cast iron pipes, complete all as specified and directed. |
| 13 | S&F 75mm bore PVC (SWR) pipe, single socketed, in any length with rubber ring joints, laid in trenches or in floors, including dismantling of old existing cast iron pipes, complete all as specified and directed. |
| 14 | S&F 110mm bore PVC (SWR) branch piece single (Single Y) equal or unequal, complete all as specified and directed. |
| 15 | S&F 75mm bore PVC (SWR) branch piece single (Single Y) equal or unequal, complete all as specified and directed. |
| 16 | S&F 110mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 17 | S&F 75mm bore PVC (SWR) bends any radius, complete all as specified and directed. |
| 18 | S&Fin repair Vitreous Chinawash down water closet one piece pan (Pedestal pattern), white/ coloured (including all fittings, fixing bolts, flushing cistern, jet spray and flush pipe) completeall as specified and directed. |
| 19 | S&Fin repair Wash Hand Basin (Vanity) long patern type of 78 cm x 48 cm including all fittingswith decorative cabinet with Door/ Shutter and 02 Nos drawers complete all as specified and directed. |
| 20 | S&F in replacement CP shower rose, over head type, size 100x100mm, square in shape, single flow, complete all as specified and directed. |
| 21 | S&F in replacement CP towel rack size 58cmx22cmx13cm complete all as specified and directed. |
| 22 | S&F in repairs 15mm bore wall mixer telephonic type single lever 2 in 1 with telephonic shower, complete all as specified and directed. |
| 23 | S&F in repairs vitreous china wash down water closet pan (pedestal pattern) white,complete including connection to drain pipe and to flushing pipe, anti-syphonage pipe etc, complete all as specified and directed. |
| 24 | S&F in replair vitreous china, white, wash hand basin, flat back of size 550mm x 400mm (Padestal pattern) including MS brackets and cutting for and pinning ends including 32mm dia PTMT waste coupling in full threaded (minimum weight 45gms) but excluding waste pipe, waste fittings etc., complete all as specified and directed |
| 25 | S&F in repairsPVC low level flushing cistern 10 Ltrs capacity, valveless, syphonic action type, white with inlet, ball valve, float and handle including brackets, PVC 32mm dia flushing pipe etc., complete all as specified and directed. |
| 26 | S&F in replair chromium plated health faucet, telephonic type with CP flexible arms 1.0 mtr long, suitable to fixed to 15mm bore CP angle valves, complete all as specified and directed. |
| 27 | S&F in replair centre hole mixer for mixing hot & cold water, suitable for wash hand basin, cast copper alloy with dual capstan head, chromium plated, fancy type, screwed down, high pressure with lettered Hot & Cold with long screwed shanks and fly nuts, screwed for iron pipe, suitable for 15mm bore, complete all as specified and directed. |
| 28 | S&F in repair 15mm bore bib tap, cast copper alloy with crutch or butterfly handle, screwed down, screwed for iron pipe, complete all as specified and directed. |
| 29 | M&L for brick work with sub class ‘B’ bricks, old size, straight or curved on plan to any radius, built in CM (1:6), including demolition of old existing brickwork or stone/ boulder masonry built in cement mortar, complete all as specified and directed. |
| 30 | M&L for rendering 15mm thick in cement mortar (1:6) on fair faces of brick or concrete surface finished even and smooth without using extra cement complete all as specified and directed. |
| 31 | M&L for 15mm thick rendering in CM (1:4) on fair faces of brick work or concrete surfaces, finished even and smooth without using extra cement, complete all as specified and directed. |
| 32 | M&L for preparation of newly plastered wallsurfaces by using necessary filling compound 1mm thick wall care putty to obtain smooth/ even surface using sand paper and applying two coats of oil bound dismater over a coat of suitable primer complete all as specified and directed. |
| 33 | M&L for preparation of newely plastered surfaces of walls and applying two coats of cement based paint, complete all as specified and directed. |
| 34 | S&F in repair 2 mm thick Linoleum sheet, plain coloured, sealed down with an approved adhesive in floors including stretching, cutting and fitting, complete all as specified and directed. |
| 35 | Demolition of cement concrete (un-reinforced) of any description and in any position not othersie specfially provided for, complete all as specified and directed. |
| 36 | M&L for60mm thick machine pressed precast concrete interlocking paverblock any shape and size confirming to IS-15658-2006, M-35 with grey cement and no pigment, over and including 50mm thick sand cusining, and over and including 50mm thick PCC (1:4:8) type D2 (using 40mm graded crushed stone aggregate),complete all as specified and directed. |
| 37 | M&L for 18-20mm thick granite (of any type) work (table rubbed and polished) in step, jambs, pillars, window-cills, cooking platform and like in cement mortar (1:4) including pointing in white cement (1:2) using marble dust with admixture of pigment to match with shade of granite laid over and including 15mm thick screed bed in CM (1:4) including dismantling old stone slabs complete all as specified and directed. |
| 38 | M&L forChequred cement concrete tiles 30cmx30cmx25mm thick with hard glazedfinish rubber topping withgrey cementand no pigments over 20mm thick screed bed or bedding layer in cement mortor (1:6), over and including75mm thick PCC (1:3:6) type C2 (using 20mm graded crushed stone aggregate), set, jointed and pointed in neat cement slurry, complete all as specified and directed. |
| 39 | S&F solid PVC wall lining consisting of 5mm thick single side prem PVC sheet inclusive of solvent cement and fixing at site on PVC frame, including dismantling of old existing PVC wall lining, complete all as specified and directed. |
| 40 | S&F in repair 6mm thick plywood, grade BWR fixed with screws to timber scantling as in ceiling including fillets, including dismantling of old existing plywood any thickness, complete all as specifeid and directed. |
| 41 | Notes :-An amount of Rs. 37,609 on account of Credit Schedule for Schedule \"A\" Part-II shall be deducted from total quoted amount of BOQ to arrive at the contract sum. |
