|
| 1 | Clearing grass and removal of rubbish on both side of the road to facilitate widening of berms ,disposal of the stuff including all labour, T&P articles required for the work etc. complete as per cluse 201 of MORD by manual means etc. complete as per direction of the Engineer-in-charge |
| 2 | Dismantling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonry, cement concrete, wood work, steel work, including T&P and scaffolding wherever necessary, sorting the dismantled material, disposal of unserviceable material and stacking theunserviceable material with all lifts and lead of 1000m as perclause202.1of MORD specification for Rural roads & as per direction of the Engineer-in-charge.. |
| 3 | cement concrete |
| 4 | Brick / Stone Masonary |
| 5 | Above 600 mm dia to 900 mm dia |
| 6 | Above 900mm dia |
| 7 | Construction of embankment/Sub grade/ earthen shoulder with approved material obtained from borrow pit with lift up to 1.5 m transporting to sites, spreading, grading to required slope and compacting to meet requirement of Tables 300.1 and 300.2 as perClause 301.5 of MoRD specification for rural roads & as per direction of the Engineer-in-Charge. |
| 8 | Excavation of road way in soil with hyudrulic excavatir if 0.9 cum bucket capacity including cutting and loading in tippers, trimming bottom and side slopes, in accordance with requiremetns of lines, grades and cross-sections, and transporting to the embankment location with a lift upto 1.5 m. and lead upto 1000m. as per Technical Specification Clause 302.3 of MORD.and as per the direction of the Engineer-in-charge |
| 9 | Construction of embankment with approved materials deposited at site from road way cutting and excavation from drain & foundation of other strutures graded & compacted to meet the requirement of Tables 300.1 & 300.2 as per clause no.301of MORD specification for Rural roads and as per direction of Engineer-In-Charge. |
| 10 | Construction of soil aggregate sub-base by providing well graded material of nominal maximum size grading 20 mm as per table 2.3 of IRC sp 77 2008, spreading in uniform layers with tractor mount appropriate grading arrangement on prepared surface, mixing by mix in place method at OMC with tractor mount appropriate rotavator attachment and compacting with threewheeled 80- 100 KN staticroller to achieve thedesired density as per the specification contained in para 2.2.3.6 and 3.7 of IRC sp 77 2008 and as per the direction of Engineer In Charge |
| 11 | Providing, laying, spreading and compacting stone aggregates of specific sizes to Water Bound Macadam specification including spreading in uniform thickness hand packing, rolling with three wheel 80-100 KN static roller in stages to proper grade & camber, applying & brooming, crushable screening / stone screeningto fill up the interstices of coarse aggregate, watering & compacting to the required density as per Clause 405 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the workand as per direction of Engineer in Charge. |
| 12 | W.B.M G-II |
| 13 | W.B.M G-III |
| 14 | Providing and applying primer coat with bitumen Emulsion [SS-1] on prepared surface of Granular base including cleaning of road surface & spraying primer @ 0.70kg/ 1.0 kg/sqm using mechanical means as perclause 502 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer-in charge. |
| 15 | Providing and applying tack coat with bitumen Emulsion [RS-1] using emulsion distributor @ 0.25 to 0.30 kg /sqm on the prepared granular surface treated with primer & cleaned with hydraulic broom as perclause 503 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer-in charge. |
| 16 | Providing, laying and rolling of close-graded premix carpet (Mix Seal Surfacing) of 20 mm thickness composed of 13.2 mm to 0.9 mm (type-B) aggregates using S-65 penetration grade bitumen @ 19 kg/10 sqm to required line, grade and level to serve as wearing course on a previously prepared base, including mixing in a suitable hot mix plant, laying and rolling with a three wheel 80-100 kN static roller capacity, finished to required level and grades to be followed as per Technical Specification Clause 509 of MoRD and as per direction of Engineer-in-Charge (Excluding cost of Seal Coat). |
| 17 | Fine dressing and turfing including transportation by mechanical means with all leads and lifts and placing of turfs in position and ramming with thapies including watering and cost of labour and all materials etc. complete as per the direction of the Engineer-in-Charge. |
| 18 | Earth work in excavation for foundtion of structures upto 3 m depth as per drawing and technical specification Clause 305.1 including setting out, construction of shoring and bracing, removal of stumps and other deleterious material dressing of sides and bottom and backfilling in trenches excavated suitable material.as per direction of the Engineer-in-Charge |
| 19 | Filling in foundation trenches with approved quality ofsand as per clause 1108, 305.3.9 & 1200of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per direction of Engineer in charge. |
| 20 | Providing concrete for plain concrete of M-15 in open foundations/Sub Structure/Superstructure complete as per drawings and technical specification clause 802,803,1202,1203 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per the direction of the Engineer-in-Charge. |
| 21 | (A) PCC Grade M 15 For foundation |
| 22 | (B) PCC M 15 For substructure |
| 23 | Construction ofun-reinforced, plane cement panneled (0.5m x 0.5m) concrete pavement of 100mm, thickness as per thee design, over a prepaired sub base, with 43 grade cement or any other type as per cluse 1501.2.2M30(Grade), course and fine aggregate conforming to IS:383, maximum size of course aggregate not exceeding 25mm, mixed in a concrete mixture of not less the 0.2 cum capacity and appropriate weight batcher using the approved mix design, laid in approved fixed side form work (steel channel, laying and fixing of 25mm micro thick polythene film, wedges steel plates including levelling the form work as per drawing), spreading the concrete with shovels, rakes, compacted using needle, screed and plate vibrator and finished in the contineous operation includion provision of construction and expansion, construction joint, applying debonding strips, primer, sealant, near approaches to bridge/culvert and construction joints, admixture as approved, curing of concrete slabs for 14-days, water finishing to lines and grade as per drawing and Technical Specification cluse 1501.panels are to be made by cuttion grooves of 3 to 5 mm thick and 25 to 30 mm deep in CC Slab. The grooves are to be filled with VG-30 Bitumen with a spray of fine sand at top. |
| 24 | Providing and laying reinforced cement concrete pipe (NP3) for culverts includingfixing collar with cement mortar 1:2 but excluding excavation,protection works,backfilling, concrete and masonry work in head wall and parapets as perClause 1106 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the worketc complete and as per direction of Engineer-in-Charge |
| 25 | 1000mm diaS/RHPC |
| 26 | 1000mm dia D/RHPC |
| 27 | 1200mm diaS/RHPC |
| 28 | Providing and laying boulder appron for bed protection with stone boulders of minimum size and weight as per table 1300.1,no fragment weighing not less than 25kg laid dry complete as per drawing and Technical Specification clause1301. |
| 29 | Providing concrete M-25 for plain/reinforced concrete in open foundation/Sub structure/ superstructure complete as per drawings and technical specification clause 800,1205.4,1205.5 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per the direction of the Engineer-in-Charge. |
| 30 | Foundations |
| 31 | Substructure |
| 32 | Superstructure |
| 33 | Supplying, fitting and placing HYSD bar for Sub structure reinforcementcomplete as per drawings and technical specifications Clause 100 and 1202 of MORD Specification for Rural roads including cost,conveyance,royalty, taxes, labour and T&P required for the work and as per the direction of the Engineer-in-Charge.. |
| 34 | Foundations |
| 35 | Substructure |
| 36 | Superstructure |
| 37 | Providing Weepholes in brick masonry/stone masonry, plain/reinforced concrete abutment, wing wall, return wall etc.all complete as perClauses 614, 709, 1204.3.7 of MORD specification for Rural roads and as per direction of Engineer-in- charge. |
| 38 | Providing & layingcement concrete wearing course M 30 grade excluding reinforcement etc. complete as per drawing & MORD Technical Specification clause 800, 1000& 1200 and as per direction of the Engineer-in-Charge . |
| 39 | Construction of R.C.C railling of M 25 grade in cast-in-situ with 20 mm nominal size aggreagate, true to line and grade, tolerance of vertical ralling post not to exceed 1 in 500, centre to - centre spacing between vertical posts not to exceed 2000 mm as per drawing and technical specifications Clauses 800, 900 and 1208.3 and as per the direction of the Engineer-in-charge |
| 40 | Providing and laying filter media with granular crushed aggregates as per specification to a thickness of not less than 600 mm with smallersize towards the soil and bigger size towards the wall and providing over the entire surface behind abutment, wing wall, return wall to the full height, compacted to firm condition complete as per drawing and technical specificationas per Clause 1200,1204.3.8 of MoRD and as per direction of the Engineer-in-Charge. |
| 41 | Providing and fixing of typical PMGSY informatory sign board with Logo as per MORD specifications and drawing. Three MS Plates of 1.6 mm thick, top and middle plate duly welded with MS flat iron 25mm x 5m size on back on edges.The lower plate will be welded with MS angle iron frame of 25mm x 25mm x 5mm. The angle iron frame of the lower most plate and flat iron frame of middle plate will be welded to 2 nos. 75mm x 75 mm of 12 SWG sheet tubes posts duly embedded in cement concrete M-15 grade blocks of 450mm x 450mm x 600mm, 600mm below ground level.The top most diamond plate will be welded to middle plate by 47mm x 47mm of 12 SWG steel plate tube.All M.S. will be stove enameled on both sides.Lettering and printing arrows, border etc. will be painted with ready mixed synthetic enamel paint of superior quality in required shade and colour.All sections of framed posts and steel tube will be painted with primer and two coats of epoxy paint as per drawing and MORD specification Clause 300,800 & 1700 and Annexure 1700.1 of MORD and as per direction of the Engineer-in-charge. |
| 42 | Reinforced cement concrete M15 grade Kilometre stone / local stoneof standard design as per IRC:8 fixing in position including painting and printing, etc as per drawing and Technical Specification Clause 1703 of MORD as per direction of Engineer-in-charge. |
| 43 | 1 km stone |
| 44 | 200 mtr stone |
| 45 | Providing and fixing of typical PMGSY Citizen Information board as per MORD specification and drawing. Three MS plates of 50 x 5 mm. thick, back plate duty welded with 75 mm dia steel tubes back on edges as per drawings. The upper and lowe plate will be welded with MS flat iron frame of 50mm x 5 mm. The steel tubes dully embeded in cement concrete M-15 grade blocksw of 600mm x 600 mm x 750 mm below ground level. All MS will be stove enameled on both sides. Lettering and printing arrows, border etc. will be painted with redimixed synthetic enamel paint of superor quality in required shade and colour. All selection of framed posts and steel tubes will be painted with primer and two coats of epoxupaint as per drawing Clause 1701 and Annexure - 1700.1. and as per the direction of the Engineer-in-charge |
| 46 | Providing and fixing of semi reflective cautionary, mandatory and informatory sign board as per IRC:67 made of 1.5 mm thick MS Sheet duly stove white colour in front and gray colour on back with red reflective border of 65 mm width and required letters and figures with reflective tape engineering grade as per Clause 1700 of MORD for Rural Roads of required shade and colour supported and welded on 47mm x 47 mm x 12 SWG sheet tube firmly fixed to the ground by mean of properly designed foundations with M-15 grade cement concrete 450x450x600 mm, 600 mm below ground level as per approved drawing Clause 1700,300 & 800 of MORD etc. complete as per direction of the Engineer-in-Charge |
| 47 | Reinforced Cement Concrete M15 grade boundary pillars / local stone of standard design as per IRC:25, fixed in position including finishing and lettering but excluding painting as per drawing and technical specification Clause 1704. |
| 48 | CONSTN. OF H.L. BRIDGE OVER LOCAL NALLAH AT 0.800 KM ON MUSHANAL RD ROAD TO KAKARLA IN THE DISTRICT OF KALAHANDI Earthwork in cutting in hard soil withinthe initial lead and lift including rough dressing and breaking the clods to maximum 5cm to 7cm and laying in layers not exceeding 0.3m in depth etc complete as per the direction of Engineer-in-Charge |
| 49 | Earthwork in excavation for bridge works in all kinds of soil, by mechanical means utilising the surplus earth locally for road work where ever required, back filling the excavated earth to the extent required complete in all respect asperapproveddrawingandtechnical specificationsasperSection900andClause301 & 304of MoRT&HSpecificationsforRoad&Bridgeworks(5th Revision) & including cost of all labour, T&P, royalty etc complete and as per direction of the Engineer-in-Charge. |
| 50 | Cement concrete (1:3:6) in foundation & plinth with 4cm. crusher broken granite metal of approved quality from approved quarry including hoisting lowering & laying in layers not exceeding 150mm. thick with proper packing & ramming each layer of concrete by means of vibrator ,providing groove & beads where necessary including curing, dewatering, shoring, shuttering if necessary at the time of laying concrete with cost, conveyance royality & taxes of all material required for the work including supplying & working pumps, T&P articles finishing the exposed surface smooth as per specific ation & direction of the Engineer-in Charge |
| 51 | Foundation |
| 52 | Cement concrete of M-150 having maximum compressive strength of 150 kg./cm2 ( test to be conducted) on 150 mm. cubes testedat 28 days including curing (tests conducted in accordance with IS-456 & IS-516) & conforming to clause-302 of IRC 21/1987 using clean crusher broken hard granite coarse aggregate of 40 mm. size down grade of approved quality to be protested in the laboratory) obtained from approved quarry the proportion mix, grading conforming to relevant ISI/IRC codes pre-approved including arranging of reinforcement as per approved drawing including hoisting, lowering concrete in layers not exceeding 150 mm. thick each compacting with vibrator watering & curing for 28 days centering shuttering & finishing the exposed surface smooth providing grooves & beads where necessary including cost, conveyance royality & taxesof all labour machineries etc. required for the work complete in all respects including dismantling the centering & shuttering as per specification & direction of Engineer-in-Charge. |
| 53 | Foundation |
| 54 | Upto Bed |
| 55 | RCC of design mix of M-250grade having specified characteristics compressive strength/ target mean strength of 250kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 216/1987/IRC-78/1983 using crusher broken hard granite course aggregate of 20mm. down graded.sizes & proportion as specified in clause-302.6.2 of IRC 21/1987 & IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tightsteel centering , shuttering & form works finishing the exposed surface smooth providing beads & grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works) |
| 56 | Deck slab |
| 57 | Road Kerb |
| 58 | Post & Railing |
| 59 | RCC of design mix of M-300grade having specified characteristics compressive strength/ target mean strength of 300kg./cm2 in design mix with minimum quantity of cement as specified in IRC Code of 150 mm. cubes at 28 days curing after mixing & tests conducted in accordance with relevant clauses of IS 456/IS 516/IRC 216/1987/IRC-78/1983 using crusher broken hard granite course aggregate of20mm. down graded sizes & proportion as specified in clause-302.6.2 of IRC 21/1987 & IS-10262 & subject to mix design in conformity with the grading & proportion of different materials for concrete as specified in the relevant codes of approved quality, obtained from approved quarry & using minimum quantity of cement confirming to codal provision including hoisting, lowering & laying concrete in layers not exceeding 15cm thick compacting with vibrators watering & curing for 28 days including water tightsteel centering , shuttering & form works finishing the exposed surface smooth providing beads & grooves wherever necessary including cost, conveyance royalties and all other taxes of all materials with all leads & lifts, cost of all labour T&P & machineries etc. required for the work including dewatering if necessary, complete in all respects as per direction of the Engineer-in-Charge but excluding cost, conveyance of tor steel & binding wire & labour charges for straightening, cutting, bending, binding welding & tying the grills lapping spacing etc. where ever necessary & hoisting & placing in position ( to be paid separately as required for RCC works) |
| 60 | Abutment & Pier Shaft Foundation |
| 61 | Abutment & Pier Shaft Above Bed |
| 62 | Column / Wing Wall / Tie Beam |
| 63 | Abutment & pier cap |
| 64 | Dirt wall |
| 65 | Approch Slab |
| 66 | Providing & laying of wearing course of 56mm thick consisting of 6mm thick mastic asphalt and 50 mm thick asphaltic concrete on top of the Deck slab. The mastic asphalt shall be of paving grade bitumen meeting the requirement given in the table 500-39, prepared byusing mastic cooker and laid to required level & slope after cleaning the surface, applying prime coatincluding providing antiskid surface with bitumen precoated fine grained hard stone chippingall complete as per clause 501, 502, 503 & 516 of MoRT&H Specification for road & bridge works (5th revision), followed by asphaltic concrete to be laid in two layers of 25mm thick each over tack coat etc complete as per approved drawing & technical specification Clause No 503 & 507 of MoRT&H specifications for road & Bridge work (5th revision) and as per direction of the Engineer-in-charge. |
| 67 | Providing HYSD bars confirming to approved gradeF-415 including all labours for cutting ,bending, binding, lapping, splicing, welding etc. (conforming to ISI specification) & jointing if necessary by lapping & tying the grills & placing in position as required for RCC works as per the approved design, hoisting, lowering & laying position including cost & conveyance of tor steel & binding wires of 18 to 20 gauge(as to be approved by the Deptt.) etc. complete with Cess in all respect (weight of binding wire shall not be considered for payment at all which will be borne by the contractor) as per specification and direction of the Engineer in charge. |
| 68 | Providing weep holes in the abutment & wing walls 8.00cm. X 23.00cm. size including metal spall backing 30cm X 30cm. size in rear complete as per the approved design & drawing including providing centering & shuttering with cost, conveyance, royality & taxes of all materials T&P articles etc. complete in all respects as per specification & direction of the Engineer-in-Charge. |
| 69 | Back filling behind abutment, wing wall & return wall with granular material including all cost, carriage, royality & labour as per specification & direction of the Engineer-in-Charge. |
| 70 | Granular Material |
| 71 | Sandy Material |
| 72 | Providing 600mm thick filter media in the rear of abutment and wing walls with 5cm size and down graded hand broken granite metal of approved quality from approved quarry as per specification and direction of the Engineer-in-charge including cost, conveyance royalty and taxes of all materials T&P articles required for the work etc. complete. |
| 73 | Supplying and fixing of RCC Guard post of 150 mm dia and IM long in RCC (1:2:4) using 20mm down graded size h.g chips including all labours, materials ,carriage ,royality & taxes of etc. complete. |
| 74 | Providing fitting & fixing expansion joints with M.S. Angles 75mm. X 75 mm. X 6 mm. at the edges of the slab with suitable anchoring arrangements by 12mm. M.S. Bars as per MOST design & drawing including fitting, fixing & welding with 6 mm. plates & filling joints of wearing coat with bitumen joint filler 12 mm. thick & joint sealing compound at top including painting of exposed surface of M.S. covered plates with anticorrosive bitumanstic paint etc. with cost, conveyance taxes of all materials labour & T&P etc. complete in all respects as per specification & direction of the Engineer-in-Charge. |
| 75 | Providing Rough stone dry packing / pitching in slope, protection walls, approns and revetments to designed thickness usinghard granite stones of required size of approved quality from approved quarryincluding quarrying supplying conveying and cost conveyance taxes royalty of all materials including T&P complete including filling the interstices with small stones by wedging and hammering finished to proper slope and level as per direction of the Engineer – in – charge including dewatering if required. |
| 76 | Finishing wall surface with waterproof cement paint of aproved shade 2 coats including watering, curing,cost of all materials & labour etc. |
| 77 | Providing and applying two coats of water based cement paint to unplastered concrete surface after cleaning the surface of dirt, dust, oil, grease, efflorescense and applying paint @ 1 litre per 02 Sqm etc complete as per derection of Engineer-in-charge. |
| 78 | Dismetalling of existing structures like culverts, bridges, retaining walls and other structure comprising of masonary, cement concrete, wood work, steel work, including T&P and scaffolding whereever necessary, sorting the dismentalled material, disposal of unserviceable material and stacking the serviciable material with all lifts and lead of 1000 m as per Technical Specification Clause 202.1 |
| 79 | Providing , fitting, fixing tar papers including all cost, carriage etc complete |
| 80 | Providing filling manually with selectedsandin layers not exceeding150mmthick includingwatering and compactingwith all leads and liftsincludingcost , carriage royalty etc. |
| 81 | Routine Maintenance (Including all Taxes and Duties) |
| 82 | Routine Maintenance after completion of construction works as per contract data of Standard Bidding document. |
| 83 | For 1st Year |
| 84 | For 2nd Year |
| 85 | For 3rd Year |
| 86 | For 4th Year |
| 87 | For 5th Year |
