Tender For Spl Repair To Bldg No T 42 Of Asri, B Coy Office Complex Bldg No T 29 At Garage Of 554 Asc Bn And Complete Re Wiring, Provn Of Air Conditioners, Cooling Appliances And Connected Work In Wet Canteen Under Ge (South) Secunderabad
Tender Value
49.29 Lakhs
Estimated cost
Bid Submission
03 Jun 2025
0 days left
EMD
99000
Bank guarantee accepted
Document Fee
500
Non-refundable
Tender Type
Online
Tender Overview
Organization
Tender ID
Competition Type
NCB
Bidding Type
Tender
Location / State
secunderabad → Telangana
EMD Exemption
Available
Quantity
Not Available
Website
Contact Person
Address
Project Description
Spl Repair To Bldg No T 42 Of Asri, B Coy Office Complex Bldg No T 29 At Garage Of 554 Asc Bn And Complete Re Wiring, Provn Of Air Conditioners, Cooling Appliances And Connected Work In Wet Canteen Under Ge (South) Secunderabad
Corrigendum
| Sr No | Corrigendum Date | Corrigendum | Type | New Submission Date |
|---|---|---|---|---|
| 1 | 27-May-2025 | Bid Auto Extn Corrigendum | Bid Auto Extn Corrigendum | 03-Jun-2025 |
BOQ
| Sl. No. | Item Description |
| 1 | Dismantling floor, hearth or wall tiling including CM bedding, removing rubbish off the premises complete all as specified and directed. |
| 2 | Dismantling stone slabs and tilesof any descriptionor thicknessin floors, aprons, riser of steps, skirting, dado etclaidbedded and pointedin any mortar complete all as specified and directed. |
| 3 | Demolition of cement concrete un-reinforced paving not exc 15cm thick above or below ground level complete all as specified and directed. |
| 4 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.18 Sqm but n. exc 0.38 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and directed. |
| 5 | All as per item No-4 here in before butin skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3 complete all as specified and directed. |
| 6 | M&L for PCC 1:2:4 type B0 (using 12.5mm graded crushed stone aggregate) 25mm thick as in levelling course,sub-floors and paving etc complete all as specified and directed. |
| 7 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) bedding complete all as specified and directed. |
| 8 | M&L forfor glazed ceramic designed coloured tiles as in vertical surfaces of size 300x450x7 mm thick set and jointed in neat cement slurry and pointed in coloured cement to match designed incl 10 mm thick backing coat in CM (1:3) complete all as specified and directed. |
| 9 | M&L for 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished)in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishingcomplete all as specified and directed. (Note : Colour of granite shall be as approved by GE) |
| 10 | M&Lfor 40 mm thick polished cudappah stone slab in vertical and horizontal support for cooking platform, shelves and like incl necessary jointing and pointing and making good to disturbed surface complete all as specified and directed. |
| 11 | Rounding (chamfering) to edge of marble/granite slab edge with mirror polishing complete all as specified and directed. |
| 12 | M&L for formwork to chullah hoods, chajjas, troughs and similar items including edges kitchen plateform etc of rough finished flat surfaces concrete complete all as specified and directed. |
| 13 | M&L for reinforcement cement concrete type B0 (1:2:4) (using 12.5mm graded crushed stone aggregate) as in slabs supported on walls, beams and columns in floorsroofs, landings, balconies canopies, deck slabs and in shelves, kitchen shelfetc complete all as specified and directed. |
| 14 | S&F TMT bars 10 mm dia and over and cut to length bent to shape required including cranking, bending, hooking ends and bending with MS wire not less than 0.9mm dia or securing with clips quality conforming complete all as specified and directed. |
| 15 | Taking down chowkats or frames with shutters n exc 1.5 sqm each of any description and making good the same damage portion (without taking off shutters from the frame) complete all as specified and directed. |
| 16 | Taking down chowkats or frames with shutters exc 1.5 sqm but n exc 4 sqm each of any description and making good the same damage portion (without taking off shutters from the frame) complete all as specified and directed. |
| 17 | S&F Solid PVC door frame of size 50mm x 47 mm made out of 5 mm plain colour PVC sheet reinforced with MS Square tube, fixed in opening complete all as specified and directed. |
| 18 | S&F for Factory made solid PVCmolded with particle board core door shutter 28 to 30 mm thick panel design with 2mm thick molded PVC sheet on the front face and 2mm plain colour PVC sheet on back face in frame at site as per specification and drawing complete all as specified and directed. |
| 19 | S&F Pressed steel door frame of size 125 X60 mm with one or more rebates including necessary fixing lugs,hinges,lock strike plate etc complete all as specified and directed . |
| 20 | S&F Pressed steel door frame of size 105 X60 mm with one or more rebates including necessary fixing lugs,hinges,lock strike plate etc complete all as specified and directed . |
| 21 | M&L for PCC 1:2:4 Type B0 ( using 12.5 mm graded crushed stone aggregate ) as in filling in pressed steel door frame complete all as specified anddirected. |
| 22 | S&F of factory made 40 mm thick flush shutters,solid core construction with block board core and plywood face panels,commercial type on both sides complete all as specified and directed. |
| 23 | S&F for 35 mm thick second class hard wood Glazed and skeleton shutters, open rebated and prepared to receive glass, gauze etc(without sash bars), edge of framing plain, chamfered or rounded, fitted withcut and mitred beds for securing glass, etc sizes of members of shutters as specified in SSR Part I, Section 8. clause 8.20 (a) fitted to chowkats complete all as specified and directed. |
| 24 | S&F ofstainless steel wire cloth 0.36 mm nominal dia of wire and average width of aperture 1.40 mm and fixed with stainless steel wire staples complete all as specified and directed. |
| 25 | M&L for prepartion of new wood and wood based surfaces of any description, not otherwise described, over 10 cm width or girth and applying two coats of synthetic enamel paint over a coat of pink primer complete all as specified and directed. |
| 26 | S&F in repair 20mm dia CP Decorative type drapery curtain rods with brackets of approved quality complete all as specified and directed . |
| 27 | S&F 100 mm size butt hinges,medium weight,cold rolled mild steel complete all as specified and directed. |
| 28 | S&F Aluminium anodised,barrel tower bolts of extruded section of size 150mm long etc complete all as specified and directed. |
| 29 | S&Fof Aluminium handles, cast type, anodised of size 150 mm long etc complete all as specified and directed. |
| 30 | S&F of 300mm mild steel,ordinary rat tail rod pattern springs including roller and roller plate etc complete all as specified and directed. |
| 31 | S&F floor door stopper of aluminium alloy body & tongue, anodised with hard drawn spring of 140mm size fixed in floor complete all as specified and directed. |
| 32 | S&F for mild steel holdfast, bands, straps, bracket/ clamp for eves gutter, valley gutter and similar conforming to Fe-290 Gde-E-165 complete all as specified and directed. |
| 33 | M&L in repairs for 18mm thick plywood of grade (BWR), type BB fixed with nails as in cupboards/Almirah Shutters complete all as specified and directed. |
| 34 | M&L for 0.9 mm thick decorative laminated sheet type 1 of surface finish colour andpattern as approved and fixed over plywood with approved adhesive complete all as specified and directed . |
| 35 | S&F of 125mm longAluminium handles, cast type, polished bright complete all as specified and directed. |
| 36 | S&F in repair Continuous (piano) hinges, electro galvanised powder coated width of flap 30mm bright finish or electro galvanised complete all as specified and as directed. |
| 37 | S&F in repair of 125 mm Hasp and staple, safety type, aluminium hinge pin including bolt to hinge plate and fixed with screws etc complete all as specified and directed. |
| 38 | S&F for 2000 Series Windows: Providing & fixing of Double Rebate windows made of pre-painted steel (Base steel as per IS 513 of 0.58mm thick “D” Quality galvanized as per IS 277 with zinc of 120 GSM). Primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer. Section for outer frame should be of 72x55mm, centre mullion should be of 72x50mm, section for fixed glass beading should be of 12x12mm and section for shutter should be of 52 x 25mm. Outer frame & mullion sections to have rebate for glazed shutters, fly mesh and 20 mm provision for guard bars/ grills fly mesh shutter section should be of 20x40mm. The sections are to be cut to length mitre joined with corner bracket. Centre mullions to be fixed with mullion cap.The shutter corner bracket should be fixed in such a way that PVC lip should cover the corner gap. Elixir or equivalent stay, handles 2nos of heavy-duty stain less steel pivot hinges shall be provided per shutter. The windows should be paneled with 4 mm thick plain float glass and S.S. Mesh for fly mesh shutter (304 grade). Rubber Gaskets are provided all around the glass. The above frames should be fixed to the concrete/masonry wall by means of self-expanding screws. Including 10mm square guard bars with 6” (152.4mm) pitch, complete for finished item of work.complete all as specified and directed.Make:-Elixir or Equivalent |
| 39 | Supplying and fixing of Fixed Louvered Ventilators made of pre - painted steel (base steel as per IS 513 of -0.58 mm thick \"D\" quality, galvanized as per IS 277 with zinc of 120 GSM) primer coated with epoxy primer of 5-7 microns thick, finish painted with a polyester paint of 12-16 microns thick and back coated with 5-7 microns thick alkyd backer, The section for louvered ventilators should be of 33 x 56 mm Box section panelled with 4 mm pinhead glass, mosquitoes proof with Ethyl propylene Diamine monomer Gasket (EPDM) and the sections cut to length mitre joined with corner bracket . Corner brackets made of CRCA with Zinc Phosphate. The frames to be fixed to the concrete/masonry wall by means of self expanding screws including 10 mm square guard bars with 6\" pitch complete for finished item of work. Make:-Elixir or Equivalent |
| 40 | Dismantling ofcast iron/PVCpipe any dia and any shape incl bends/branch pieces jointed in cement mortar and taking out if reqd complete all as specified and directed. |
| 41 | S&Ffor 110mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ringjoints fixed to wall etc using synthetic rubber adhesive cement solvent complete all as specified and directed. |
| 42 | S&F 110mm dia PVC (SWR) bends with acess door any radiuscompleteall as specified and directed. |
| 43 | S&F for 110mm dia PVC (SWR) bends any radius complete all as specified and directed. |
| 44 | S&F for 110mm dia PVC (SWR) vent cowl complete all as specified and directed. |
| 45 | S&Ffor 75mm dia PVC (SWR) grade single socketed pipes in any length complete with rubber ringjoints fixed to wall etc using synthetic rubber adhesive cement solventcomplete all as specified and directed. |
| 46 | S&F for 75 mm dia PVC (SWR) grade bends of any radius complete all as specified and directed. |
| 47 | S&F 75 mm dia PVC (SWR) grade bends with acess door of any radius completeall as specified and directed. |
| 48 | S&F PVC (SWR) vent cowl, 75mm dia complete all as specified and directed. |
| 49 | M&L PVC (SWR) multi floor trap 75mm with grating including jointing with solvent cement complete all as specified and directed. |
| 50 | S&F in repairs vitreous china warewash hand basin white flaye back of size 550x 400mm with peatestal including brackets, 32 mm CP waste coupling, chain and plug, waste fittings, and all necessary inlet, out let connections complete all as specified and directed. |
| 51 | S&F in repairs 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts complete all as specified and directed. |
| 52 | S&F in repairs for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia complete all as specified and directed. |
| 53 | S&F in repairs vitreous China squatting pan, `Orissa\" pattern, size 580 x440 mm white, with integral foot rests (excluding flushing cistern and flush pipe) completeall as specified and directed. |
| 54 | S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handled including brackets complete all as specified and directed. |
| 55 | S&F in repair of Chromium plated tubular towel rail 20mm dia 600mm longfixed with suitable steel screw etc complete all as specified and directed. |
| 56 | S & Fin repairs Brass chromium plated towel ring with round flange complete all as specified and directed. |
| 57 | S&F in repairs PVC connection 15 mm dia and 600 mm long with both and nuts complete all as specified and directed. |
| 58 | S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and directed. |
| 59 | S&F in repairs concealed stop cock but fancy type 15mm dia, chromium plated with long shank and cup (concealed type) complete all as specified and directed. |
| 60 | S&F in repair 125mm size brass chromium plated shower rose with or without swivel joints including fixing to steel pipe or union completeall as specified and directed. |
| 61 | S&F in repairs looking mirror 600 x 450 mm bevelled edge of selected quality glass, mounted on 6mm thk AC bldg board orcommrcial ply wood & fixed to wooden plugs with chromium plated brassscrews and cup washers complete all as specified and directed. |
| 62 | S&F in repairs sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm completeall as specified and directed. |
| 63 | S&F in repairs for plate rack of stainless steel of size 31X36X10 (inch) with steel sleevs & hanging arrengement for utensile complete all as specified and directed. |
| 64 | S&F rotational moulded Polyethylene [HDPE] water tanks, Triple layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including taking down old tanks completeall as specified and directed. |
| 65 | S&F in repairs 25mm dia Ball valves high pressure of PTMT with epoxy coated Aluminium rod & highdensity plastic ball screwed for iron pipe complete all as specified and directed. |
| 66 | Taking up or down 20mm dia steel tubing connection, including cleaning for refixing or removal to store complete all as specified and directed. |
| 67 | Taking up or down 25mm dia steel tubing connection,including cleaning for refixing or removal to store complete all as specified and directed. |
| 68 | S&F 20mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls,ceiling or in floor etc completeall as specified and directed. |
| 69 | S&F for 25mm bore CPVC pipe outer dia of pressure ratings 11 SDR-II including all fittings fixed complete to walls, ceiling or in floor etc completeall as specified and directed . |
| 70 | S&Fin repairsfor providing25mm dia Gun Metal, globe or gate valves with iron wheel head, screwed both ends for iron pipes complete all as specified and directed. |
| 71 | S&F in repairsfor providing25mm dia CPVC gate valvesscrewed both ends for iron pipes complete all as specified and directed. |
| 72 | S&F in repair for high density pipe 40 mm dia (HDPE)pressure rating 6 Kg / Sqcm fixed to wall and floors etc complete all as specified and directed. |
| 73 | M&L for 10 mm thick Plaster on RCC roof slab and sunken portion with CM (1:3) including water proofing compound @ 3% by the total weight of cement used or as per manufacturer\"s instruction complete all as specified and directed.(Note : WPC shall be measured and paid separately) |
| 74 | M&L for PCC (1:2:4) type B-0, using 12.5 mm graded crushed stone aggregate as in roof padding / sunken floors and similar work using WPC @ 2%of totalwt of cement used or as per manufacturer\"s instruction complete all as specified and as directed. (Note : WPC shall be measured and paid separately under the relevant item) |
| 75 | M&L for preparation ofplastered surfaces and applying primer @ 0.30/Kg per sqm and applying tack coat of bitumen 85/25 @ 1.2 kg/Sqm laying 3.0mm thick polyster reinforced APP modified water proofing membrane weighing not less than 3.5kg/sqm 100 mm overlaps both longitudinally and transverselyby torchbonding overcoat of hot blown andone coat of bitumen basedpaint @1.20 ltr/sqm over APP membrane including removal of existing water proofing treamant on roof with plaster, sunken slabs, edges and vertical surfaces complete all as specified and directed. |
| 76 | M&L for applying a coat of reflective bitumenous aluminium paint @ 0.15 Kg / sqm over Bitumen surfacecomplete all as specified and directed. |
| 77 | S&F for anodoised aluminium powder coated snap grid frame work for ceiling 605mm x 605mm using aluminium anodoised sections specified in SSR part-I 1991 including cutting, drilling jointing ect complrtr including 4mm dia of GI hangers wire suspenders fixed with adjustable connectors and providing 6mm thick E-boards (Classic) 605mm x 605mm size Specified by Engr-in-charge and making good complete all as specified and directed. |
| 78 | Demolition of Precast cement concrete block walling built in CM or Cement lime Mortar complete all as specified and as directed. |
| 79 | M&L for precast cement concrete block masonry exc. 10 cm width with solid blockC1 (1:3:6) (using 20 mm graded crushed stone aggregate) and settingin cement mortar (1:6) complete all as specified anddirected. |
| 80 | M&L for precast cement concrete solid building blocks or slabs Type C1 1:3:6 (20 mm graded crushed stone aggregate) 10cm thick (with plain or interlocking joints as directed) setting in mortar(1:4) in walls complete all as specified anddirected. |
| 81 | M&L for75mm thick PCC (1:3:6) type C-1 (20 mm graded crushed stone aggregate) as in plinth protection finished even and smoothwith using extra cement including forming 6mm widejoints at n,exc 2.0 sqm area and filling with mastic comprising one part of heated bitumen 85/25 grade and three parts of sand complete all as specified and directed. |
| 82 | M&L for PCC (1:4:8) type D2 using 40mm graded crushed stone aggregate as in foundation filling and mass concrete complete all as specified anddirected. |
| 83 | M&Lfor PCC (1:4:8) type D2 (using 40mm graded stone aggregate as in 75mm thickin sub base complete all as specified and directed. |
| 84 | S& for glossy finished heavy duty chequered cement concrete tiles 30cmx30cmx25mm thick set jointed with grey cement and pigment and pointed in neat cement slurry including 20 mm thick screed bed of CM(1:6) in floors complete all as specified and directed. |
| 85 | Taking down cement plaster on brick /stone masonry / concrete surfaces of wall / ceiling incl raking out joints, hacking for key, scrubbing down with water etc and deposited the debris outside the MD land complete all as specified and directed. |
| 86 | M&L for rendering in two layer i.e.5mm thick inCM 1:4 includingmixing water proofing compound @ 2% of total of cement used in 5mm thickness or as per manufacturer\"s instruction over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished evenand smooth without using extra cement complete all as specified and directed.(Note WPC shall be measured and paid separately under relavant item) |
| 87 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfacesof walls finished even and smooth (without using extra cement) complete all as specified and directed. |
| 88 | M&L for preparation of new plastered or unplastered surfaces on walls and applying a coat of alkali resistant primerfollowed by applying Birla wall care puttyand making the surfaces smooth and evenwith sand paper and finally applying two coats of oil emulsion distemper completeall as specified and directed . |
| 89 | M&L for preparation of newly plastered external wall surface and applying two coats of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint completeall as specified and directed .Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard). |
| 90 | M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etc and applying two coats of acrylic emulsion distemper over one coat primer including one coat of 3mm average thick wall care putty afterfilling of cracks, holes and including leveling the surface where undulation found with wall care putty etc complete all as specified and directed. |
| 91 | M&L for complete removal of existing treatment of old decorated external wall surfaces by scrapping, washing, cleaning etc and applying two coat of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty complete all as specified and directed.Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard. |
| 92 | M&L for Machine cut kota stone slab flooring 20-25mm thick over cement 20mmscreed base in CM 1:6laid and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing complete all as specified and directed. |
| 93 | M&L for machine cut kota stone slab 20-25mm thick in riser of steps, treads, skirting,dado and pillar laid over cement screed and jointed with grey cement slurry mixed with pigment to match the shade of the slab including rubbing and polishing and rounding of edges complete incl 10mm thick rendering in CM (1:3) backing of wall tiles such as dado/skirting in vertical surfacecomplete all as specified and directed. |
| 94 | M&L for vitrified tiles light shade 10mm thick (square/ rectangular) polished, area of each tiles not exceeding 0.36 sqmasin floors etc. set and jointed in neat cement slurry and pointed in white/ coloured cement, laid over and including cement screed bed 15mm thick in cement mortar 1:4 complete all as specified and directed. |
| 95 | All as per item No 94 here in beforebut asin skirting / dados etc. including backing coat 10mm thick in cement mortar 1:3 complete all as specified and directed. |
| 96 | M&L for non skid ceramic coloured tiles 7 to 8 mm thick (Square / rectangular) area of each tiles exc 0.06 Sqm but n. exc 0.11 Sqm in floors etc set and jointed in neat cement slurry and pointed in coloured cement to match including 15mm thick screed bed of CM (1:4) complete all as specified and directed. |
| 97 | M&L for 16 to 18mm thick granite stone (of any type ) work (table rubbed and polished)in floors, staircase tread & risers of steps, cooking platform, window cill/jambs etc laid bedded over 15mm thick CM (1:4) bedding & pointed in white/coloured cement to match coloured tiles including grinding and mirror polishing complete all as specified and as directed. (Note : Colour of granite shall be as approved by GE) |
| 98 | M&L forcement concrete (1:3:6) type C-1 using 20mm graded crushed stone aggregate as in lintle upto 1.5m clear span, steps, bed plates, kerb & coping including necessary formwork complete all as specified anddirected. |
| 99 | S&F IInd class hardwood plain solid straight chowkhats and frames, wrought, framed rebated on the solid, rounded or chamfered, put together with glue, pinned at joints complete all as specified and directed. |
| 100 | S&F for Powder coated aluminium (minimum thickness of powder coating 50 micron) work for doors, windows, ventilators and partitions (Fixed portions) with extruded built up standard tubular sections/ appropriate Z sections and other sections of approved makefixing with dash fasteners of required dia and size, including necessary filling up the gaps at junctions, i.e. at top, bottom and sides with required EPDM rubber/ neoprene gasket etc. Aluminium sections shall be smooth, rust free, straight, mitred and jointed mechanically wherever required including cleat angle, Aluminium snap beading for glazing/ paneling, C.P. brass/ stainless steel screws complete all as specified and directed. |
| 101 | S&F 12mm thickprelaminated particle board, exterior grade, prelaminated both sides with decorative choice laminationin aluminium doors/partition etc complete all as specified and directed. |
| 102 | S&F in repairs butt hinges extruded aluminium alloy with galvanized mild steel hinge pin ,anodized of hinges 100 mm type B-21 complete all as specified and directed. |
| 103 | S&F extruded aluminum alloy handle fabricated type anodized 150mm long complete all as specified and directed. |
| 104 | S&F Aluminium alloy, anodised, sliding door bolt with hasp, staple (bolt type)of size 300mm and fixing clips of sheet, cast or extruded sections and fixing bolts and sliding bolts of extruded sections or cast-aluminium alloy complete all as specified and directed. |
| 105 | S&F plain sheet glass 3.0 mm thick ordinary quality and glazing with aluminum glazing clip/glass putty in aluminum window/ms windows shutter not exc 0.5 Sqm in each pane completeall as specified and directed. |
| 106 | Taking down eaves gutters and rainwater pipes (any size or pattern), including all fittings, heads, shoes, bends, swan- necks, etc including cleaning or refixing or removal to Store (measured overall as fixed along the centre line over fittings and accessories) complete all as specified and directed. |
| 107 | S&F for 75 mm dia PVC (SWR)bends with acess door of any radius completeall as specified and directed. |
| 108 | S&F for low density polyethylene (LDPE) pipes of 40mm, pressure rating6 kgf/cm2 fixed complete to walls, ceilings or in floors etc complete all as specified and directed. |
| 109 | Excavation in trenches n.exc 1.5m wide and n.exc. 1.5m in depth for taking up/laying sewer lines and getting out in hard and dense soil complete all as specified and directed. |
| 110 | Returning,filling in soil including spreading, levelling, watering and well ramming in layers n.exc.25cm complete all as specified and directed. |
| 111 | Removing of excavated soil to a distance n.exc 50m and depositing where directed at alevel n.exc 1.5m above starting point complete all as specified and directed. |
| 112 | M&L for Salt Glazed Stoneware pipes grade \"A\",100mm bore,laid in trenches and jointed complete all as specified and directed. |
| 113 | M&L for PCC 1:3:6 type C2 (using 40mm graded crushedstone aggregate) for bed to drain pipe 100mm bore including packing under and haunching against the sides of pipes after they are laid and tested complete all as specified and directed. |
| 114 | S&F for 15 mm bore pillar taps, cast copper alloy, chromium plated fancy type screwed down high pressure with or without lettered \"Hot\" or \"Cold\" with long screwed shanks and fly nuts complete all as specified and directed. |
| 115 | S&F for bib taps long body with flange cast copper alloy chromium plated fancy type with crutch or butter fly handle screwed down for Iron pipe or for brass fancy for CP brass fancy type 15mm dia complete all as specified and directed. |
| 116 | S&F for two way bib cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and directed. |
| 117 | S&F in repairs angular stop cock cast copper alloy fancy type screwed down high pressure with crutch or butterfly handle, screwed both ends for iron pipe or for union and fixed for 15mm bore of pipe with long shank and cup complete all as specified and directed. |
| 118 | S&F in repairs vitreous china ware wash down white water closet pan (pedestal pattern with trap incl connecting to drain and flushing pipe, antisyphonage pipe incl PVC sheet cover etc completeall as specified and directed. |
| 119 | S&F in repair PVC valveless syphonic action type flushing cistern 10 ltr capacity white with intel ball valve float flush pipe and handle including brackets completeall as specified and directed. |
| 120 | S&F for Health faucet (ABS body) mild steel chromium plated suitable for 15mm dia pipe with 1.25 metre long flexible tube and ABS wall hook including making connections and fixed in position complete all as specified and as directed. |
| 121 | S&F in repair of Vitreous China Urinal, Half stall type, white including chromium plated urinal spreader, and waste pipewith grating and union for discharge pipecompleteall as specified and directed. |
| 122 | S&F for sinks made of stainless steel 1mm thick kitchen or laboratory with plugs, washers and wastes including bedding in cement mortar on to dwarf wall or including fixing cantilever brackets and connecting union to pipe overall size 495mm x 420mm bowl size 410mm x 330mm x 160mm complete all as specified and directed. |
| 123 | S&F for 20mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed. |
| 124 | S&F for 25mm bore unplasticised PVC pipe of pressure ratings 10kgf/Sqcm including all fittings fixed complete to walls, ceiling or in floor etc complete all as specified and directed. |
| 125 | Cutting chases in PCC block walls for concealed water tubing etc and making good, cutting not exc 10 cm girth complete all as specified and directed. |
| 126 | S&F rotational moulded Polyethylene [HDPE] Water Tanks,Triple Layered, ISI Marked Cylindrical & Vertical Type 1000 Litres Capacity hoisted and fixed in position including provision of 40mm/25mm dia spouts for connecting inlet, outlet, over flow and washout pipes including complete all as specified and directed. |
| 127 | S&F for Ball valves high pressure of PTMT with epoxy coated aluminium rod & high density plastic ball screwed for iron pipe bore dia of25mm(Minimum weight455 gms) complete all as specified and directed. |
| 128 | Dismantling Asbestos cement (corrugated semicorrugated, etc.) sheets in roof coverings complete all as specified and directed. |
| 129 | S&F for pre-painted Galvalume aluminium zinc coating GI based corrugated steel sheet 0.50mm thick of an coloure having tensile strength of 550Mpa (AZ-150) as in roof covering fixed with self tapping screws complete all as specified and directed. |
| 130 | Dismantling structural steel work complete all as specified and directed. |
| 131 | M&L for Rolled mild steel inPlates (plain or chequered) channels, square cut or notched (ordinary and counter sunk) forming holes, without any attachment complete all as specified and directed . |
| 132 | S&F of Structural Steel work as in columns, posts, stanchions etcusing ERW or induction butt welded tubes conforming to IS-1161-1998 grade St.-240or with holow structural steel sections conforming to IS 4923-1997 Grade St-240 complete all as specified and directed. |
| 133 | M&L for rolled section as in main and cross beam, hip and jack rafter,purline where connected to common rafters and running rails and guides for sliding doors fixed with angle cleats or other connecting plates of grade Fe-410 (gde E-165) complete all as specified and directed. |
| 134 | M&L for preparation of new steel surfaces over 10 cm in width or girth not otherwise described and applying two coats of synthetic enamel paint over one coat of red oxide primer complete all as specified and directed. |
| 135 | M&L for rendering in two layer i.e.5mm thick inCM 1:4includingmixing water proofing compound @ 2% of total of cement used in 5mm thickness over 10mm thick in CM (1:6) on concrete/block masonry surfaces and finished evenand smooth without using extra cement complete all as specified and directed.(Note WPC shall be measured and paid separately) |
| 136 | M&L for 10mm thick plaster in CM (1:6) on fair faces of concrete/PCC block surfacesof walls finished even and smooth (without using extra cement)complete all as specified and directed. |
| 137 | M&L for rendering 5 mm thick in ceilings in CM (1:3) finished even and smooth without using extra cement complete all as specified and directed. |
| 138 | M&Lfor preparation of newly plastered wall surfaces with 3mm average thick wall care putty and applying two coat of oil bound distemper over one coat ofprimer including leveling the surfaces where undulation found with cement putty etc complete all as specified and directed. |
| 139 | M&L for preparation of newly plastered or unplastered surfaces on ceilings including cornices and applying three coat of white wash completeall as specified and as directed . |
| 140 | Supply only water proofing compound complete all as specified and directed. |
| 141 | M&L for preparation ofoldsurfaces plastered or unplastered of ceilings including cornices and applying one coat of white wash complete all as specified and directed . |
| 142 | M&L for complete removal of existing treatment on wall by scrapping, washing, cleaning etcwith 3mm average thick wall care putty and applying two coats of acrylic emulsion distemper over one coat primer including filling of cracks, holes and including leveling the surfaces where undulation found with wall care putty etc complete all as specified and directed. |
| 143 | M&L for complete removal of existing treatment of old decorated external wall surface by scrapping, washing, cleaning etc and applying two coats of weather proof (exterior grade) acrylic emulsion paint with anti fungal property over a coat of primer of the same manufacturer as that of paint incl filling cracks, holes using wall care putty completeall as specified and directed.(Make: Dulux Weather Shield Max or Apex Ultima from Asian Paints or Berger weather coat All guard). |
| 144 | Material and labour for point wiring complete all as specified with 1100 Volts grade 1.5 Sqmm PVC insulated FR-LSH unsheathed cable with multistranded copper conductor conforming to IS:694:1990 with ISI marking in and including PVC rigid conduit medium grade of size minimum 20 mm with all accessories surface in wall / ceiling including continous earth wire 1.5 Sqmm PVC insulated FR-LSH unsheathed 1100 Volts multistranded copper conductor connected to common earth and earth dolly including modular metal flush boxes concealed/surface in walls/stones and modular white plate covers with frame for mounting of modular switches/sockets/fan regulators etc complete all as specified and directedfor the following:-(a) One light point controlled by one switch. |
| 145 | (b) One fan point controlled by one switch. |
| 146 | (c) One three pin switch socket 6 Amps outlet on independent board. |
| 147 | (d) One three pin switch socket 6 Amps outlet on same board. |
| 148 | Description all as per item No 144 here-in-before but using 2.5 Sq mm single core copper conductor cable of multistranded PVC insulated FRLS 1100 Volts grade for 5/15 Amps switch socket combination point including running of 2.5 Sq mm copper conductor PVC wire as earth continuity conductor along with wiring and connecting to the common earth dolly complete all as specified and directed. |
| 149 | All as per item No 144 here in before but with cable 4 sqmm multi stranded copper FR-LSH wire , 1100 Volts grade, unsheathed for one 3 pin socket out let 15 amps on independent board including continuous earth wire PVC insulated 4 sqmm copper stranded conductor FR-LSH, 1100 Volts grade, connecting to common earth and earth dolly complete all as specified and directed |
| 150 | S&F in repair Modular switch 1 way 6A , 1-module complete all as specified and directed. |
| 151 | S&F in repair Modular Switch 1 way 16A, 1 Module capacity 230 volts complete all as specified and directed. |
| 152 | S&F Modular socket, shuttered type, 6A - 3 pin 2 -module complete all as specified and directed. |
| 153 | S&FModular socket, shuttered type, 6/16A -combined 2-module complete all as specified and directed. |
| 154 | S&F ceiling rose three terminal surface bakelite type AC 50 Hz 230 Volts of size 65 x 50 mm complete all as specified including taking down the old unserviceable complete all as specified and directed. |
| 155 | S & F SPN double door, metallic distribution board 12 ways conforming to IEC 61439-3, suitable for flush / surface mounting with provision for DP RCCB / RCBO / Isolator / MCB as incomer and SP MCBs as outgoing, reversible metal door, 100 A copper busbar, fully shrouded neutral bar, earth bar, wire set & cable ties for cable management, pre fitted masking sheet, etc. having IK 09 & IP 43 protection complete all as specified in IS 732: 2019 complete all as specified and directed. |
| 156 | S&F MCB SP230V suitable for fixing on MCB DB of capacity 6 to 32 Amps including taking down the old unserviceable complete all as specified and directed |
| 157 | S&F MCB (\"B\" curve) 32 A, 230 V, 50 Hz, SPN for conforming to IS/IEC 60898-1-2002, having breaking capacity Icn = 10 kA, sliding bottom clamp, colour coded on/off indication on dolly, bi-connect IP 20 protected lower terminals and sliding shutters, etc. as specified in IS 732: 2019 complete all as specified and directed. |
| 158 | M&L for submain wiring using 3 runs of 1.5 Sq mm 1100 V grade single core FR-LSH flexible cable conforming to IS 694: 2010, having multi-drawn thin strands of electrolytic copper conductors and insulation for phase, neutral and earth continuity conductor connecting to earth dolly, colour-coded as per IS 11353: 1985, drawn in medium grade PVC recessed conduits on surface/wall/ceiling, conforming to IS 9537 (Part- 3): 1983, of size not less than 25 mm NB, including making good of disturbed surfaces of wall / ceiling / floor all complete as specified in IS 732: 2019 complete all as specified and directed. |
| 159 | Disconnecting and removingceiling fan of 1200/1400 mm sweepany height from electrical connection bringing down, dismantling, cleaning internally and externally thoroughly examine and rewinding of the ceiling fan with equivalent new super enamelled copper wire of existing gauge and weight as per manufacturer\"s design and instructions including varnishing for wall mounted fan complete including replacement of worn out/defective parts such as capacitor, sealed ball bearing, rubber bushes , split pins, cotter pins and check nuts etc overhauling, lubricating with approved lubricants, reassembling and refixing in original position with provision of new flexible wire of size 23/0.0076 multistranded copper conductor cable from ceiling rose to fan including painting of wall mounted fan complete with synthetic enamel paint by spraying including filling cavities with filler , one coat after cleaning all dust etc & testingcomplete all as specified and directed. NOTE: Quoted rate includes cost of capacitor, ball bearing, rubber bushes, misc items etc. |
| 160 | S&F Electronic type fan regulator stepped socket type, suitable to work on 230 volts complete all as specified and directed. |
| 161 | S&F 20 W surface / wall mountedLED batten having PC diffuser, luminous efficacy of minimum 100 lumen/W, CRI > 80, PF > 0.9, CCT 6500K,independent isolated SMPS based constant current electronic LED driver with THD < 20%, surge voltage protection and other safety tests as per IS 15885 (Part-2/Sec-13): 2012, polycarbonate diffuser, housed in powder coated white extruded aluminium channel housing. white coloured ABS end caps, IP 20 protection, input voltage range 140- 270 V, input frequency 50- 60 Hz, including electrical connection with 3 core flexible Cu conductor cable of appropriate size from ceiling rose to the fixture complete all as specified and directed. |
| 162 | S&F in replacement of old unserviceable surface mounting light fitting with new LED light fitting 2\" x 2\" of capacity 36 Watts powder coated white CRCA full glow suitable for ceiling including making electrical connection from ceiling rose to light fittinf complete all as specified and as directed . |
| 163 | S&F sheet metal enclosures for DB\"s when MCB\"s to be used single pole & neutral 1 way without bus bar including MCB of 6 Amp complete all as specified and directed. |
| 164 | S & F In replacement of old unserviceable Building security light fitting versatile pressure die-cast aluminium with high power LED 35 W as light source complete with LED 35 W 5000K rated life 50000 burning hours ,efficacy 120 lumen/watt including bracketsmade out ofGI pipe 32 mm dia light gradepipebent to shape incl 02 Nos MS flate clamps inclnut bolts connection complete all as specified and directed. |
| 165 | Disconnection and removing the existing unserviceable earthing and M & L of Earthing complete with galvanised steel earth plate electrode 60cm x 60cm x 6mm thick burried directly in ground to a depth not less than 2.25 m below ground level with top edge of earth plate not less than 1.5 m below normal ground level connected to GIearth lead wire 4 mm dia by means of bolts, nut, check nuts and washers etc of galvanised iron and earth lead protected by provision of GI pipe 15 mm bore of medium grade from earth electrode to DBs/Main switch all as shown in Electrical Plate No 3 of SSR Part I and connected to main switch board including excavation and earth work in any type of soil, PCC chamber in 1:2:4 Type B-1 using 20 mm graded stone aggregate 75 mm thick RCC cover in 1:2:4 type B-1 reinforced with 6mm dia bars at 75mm c/c both ways with 12mm dia MS bar handle made to shape, 20 mm dia medium grade GI watering pipe perforated at bottom with funnel and wire mesh, common salt and charcoal filling complete including testing on completion complete all as specified and directed.(Note: GI pipe 15mm dia(MG) & GI earth lead 4mm dia upto 7.5 m length is deemed to be included in quoted rate). |
| 166 | M&L for taking down copper/aluminium point wiring (light, fan, socket or power) complete, including fixture and fittings such as switches, ceiling roses, pendants, regulators, sockets, light fitting etc. removing materials to store for keeping in safe custody or for taking credit (credit for above items should be made as per conditions separately) and making good disturbed surfaces of walls, floors, etc complete all as specified and directed. |
| 167 | Taking down unserviceable old MCB/DB complete all as specified and directed. |
| 168 | S&F Modularceilingfan regulator 2 module step type AC 240 voltsuitable for 1200/1400 mm sweep including taking down the old unserviceable complete all as specified and directed. |
| 169 | S&F sheet metal enclosure MCBDB SPN 12 way240 Volts double door with magnetic locking system complete all as specified and directed. |
| 170 | S & F MCB SPN230Vsuitable for fixing on MCB DB of capacity 63 Amps including taking down the old unserviceable complete all as specified and directed. |
| 171 | S&F modular sheet metal enclosure single pole and neutral enclosure with two pin and earth plug and socket complete with one single pole MCB 20 Amps capacity complete all as specified and directed. |
| 172 | M&L for concealed Submain wiring with two single core 4 Sq mm PVC insulated cable FRLS type copper conductor multistranded 1100 Volts grade drawn through andincluding rigidPVC conduit and conduit accessories of 25 mm dia medium grade including running up of 4 Sq mm copper conductor multistranded PVC insulated cable as earth continuity conductor along the wiring and connected to the common earth dolly completeincludingremovingtheexistingunserviceablesubmain wiringandmakinggood thedisturbed surfaceto match with the existing complete all as specified and directed. including taking down the old unserviceable complete all as specified and directed.Note:-two runs of cable, one run of earth contuinity conductor and one run of conduit shall bemeasured and paid as one unit length. |
| 173 | S&F wall mounted box type LED of 20 watt with LED Lamp,with 2 Nos round blocks with necessary fixing arrangements and connecting to the point wiring with necessary flexible copper conductor multistranded three core of suitable length & size from fitting to the ceiling rose complete including taking down the old unserviceable complete all as specified and directed. |
| 174 | S&F 36 watt recess softline luminaire (2x2) suitable for armstrong/grid ceiling with high brightnesswhite LEDs and PMMA extruded diffuser giving glare free light and good aesthetic appeal and all including taking down complete all as specified and directed. |
| 175 | S & F 12 Watt LED Bulb with lamp holder insulated body surface bakelite with back plate suitable for angle / batten fittings including taking down the old unserviceable complete all as specified and directed. |
| 176 | S & F Security Lights of 1x25 watt LED light with high power LED and unique peanut lens to ensure uniform distribution and including provision of 1.5 sqmm 3 core multistranded copper conductor cable from light fitting to junction box bracket made out of GI pipe of 25mm dia not less than 1.2 mtr long and fixed on walls with 2 nos MS clamps made out of MS flat of suitable size thick complete with MS nuts, bolts and washers etc bent to required shape complete including taking down the old unserviceable complete all as specified and directed. |
| 177 | Earthing complete with galvanised steel earth plate electrode 60cm x60cm x6mm thick buried directly in ground earth pit not less than 2.25 mtr deep with top edge of plate not less than 1.5m below ground level, connecting to the Galvanised iron earth earth lead 4 mm dia, by means of nuts, bolts,check nuts and washer etc of galvanised iron and earth lead protected by provision of GI pipe med grade 15mm bore from earth elelctrode to test pointincl provn of concrete pit in PCC (1:2:4) type B-1 using 20mm graded stone agagregates with 40mm thick cover of RCC (1:2:4) reinforced with XPM (weight not less than 4Kg/Sqm) and frame of angle iron 25 x 25x6mm with lugs 2 Nos and with 6mm dia MS bar handle made to shape, GI pipemed grade 20mm bore pipe for watering perforated at bottom 1.75 mtr long placed on top edge of earth plate, common salt and charcoal filling, test point with fixing arrangement, funnel, wire mesh and earth work in hard/dense soil, returning in and removal of surplus soil to a distance not exceeding 50mtr, all as per electrical plate No 5 of SSR Part-I and connection to earth test point all as specified incl testing on completion. Note :- Item of Earthing includes cost of 7.5m long galvanised iron earth lead 4 mm size and protection pipe of 15 mm bore GI light grad including taking down the old unserviceable complete all as specified and as directed |
| 178 | S&F in repair ceiling fans complete with blades, down rods, electronic regulator and accessories, 230 V, 1200mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated with brushless direct current motor(BLDC) complete all as specified and directed.Note:Quoted rate includes taking down and transportation of Old unserviceable BER ceiling fan to AGE E/M Store yard. |
| 179 | S&F in repair Exhaustfan of metal body250 mm sweep with metallic louver includingconnecting up ofPVC insulated copper conductor multi stranded cable of suitable sizefrom ceiling rose to connector complete all as specified and directed. Note:Quoted rate includes taking down and transportation of Old unserviceable BER exhaust fan to AGE E/M Store yard. |
| 180 | M&L for cutting of wall in round shape irrespective of height of building using machine cutting only and making opening suitable for mounting of 250 mm dia exhaust fan and making good disturbed surfaces including grouting of nuts and bolts and clearing the debris and making the work area clean complete all as specified and directed. |
| 181 | S&F in repair electric water heater storage vertical geyser , energy efficient, Titanium enamelled coatingheating element upto 2KW capacity 25 litre, BEE 5 Star rated complete with all accessories connection piece etc complete all as specified and directed. Note:Quoted rate includes taking down and transportation of Old unserviceable BER geyser to AGE E/M Store yard. |
| 182 | Supply and laying of CPVC pipes SDR 11 and plain CPVC SDR 11 fittings on walls/ceiling or laying in floors complete all as specified of size 16mm dia including taking down the old complete all as specified and directed. |
| 183 | S&FCPVC ball valve of size 16mm dia including taking down the old complete all as specified and directed. |
| 184 | S&F Bib tap standard of PTMT any colour high pressure screwed for CPVC pipe and fixed of 15mm dia including taking down the old complete all as specified and directed. |
| 185 | Supply, install , testing and commissioning of hi wall split inverter type units indoor/outdoor complete with cordless remote control unit and with in built air ioniser and plasma filter, copper winding compressor, copper condensor for better indoor air quality with minimum 5 star rating of capacity 1.5 TR EER 3.2 inverter type AC complete all as specified and directed.Note: Technical specifications , model no of AC to be submitted along with the sample approval. |
| 186 | S & F voltage stabilizer for automatic operation single phase naturally air cooled indoor type & designed for input variation between 130 volt to 280 volt with output voltage stabilized at 230 V with accuracy of (+/-) 2.5% and of capacity 4.0 KVA complete all as specified and directed. |
| 187 | Supply,installation, commissioning of Glass Top Deep Freezer single phase 240 volt, 50 Hzdeep freezer with glass top of capacity 320 ltrs complete all as specified and directed. |
| 188 | Supply, installation, commissioning of Water cooler fully stainless steel, electric driven single phase having approx storage and nominal cooling capacity as 40/80 ltrs complete all as specified and directed. |
| 189 | S&F refrigerator,double door electric driven (single phase), capacity not less than 301 ltrsupto to 310 Litres BEE 5 star rated complete all as specified and directed.Make: Samsung/LG/Blue star |
| 190 | Supply & fix wall mounting fans 230 volts single phase oscillating 450 mm sweep suitable for wall mounting all as specified and directed Make: Almonard/crompton/Usha. |
| 191 | Supply and fix Voltage stabilizer for automatic operation, single phase naturally air cooled indoor type & designed for input variation between 170 V to 250 V with output voltage stabilized at 230 V with accuracy of ± 2.5% and of capacity 1 KVA |
| 192 | M & L Submain wiring with 2 runs of single core 4 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories concealed of medium grade not not less than 25mm dia including one run of single core 4 sqmm PVC insulatedsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from DB to DB/main boardcomplete all as specified and as directed. |
| 193 | S&F copper tubing of dia 1/2\" duly insulated for refrigerant gas including making fixing arrangement on wall/ ceiling /roof complete all as specified and directed. |
| 194 | S&F copper tubing of dia 3/4\" duly insulated for refrigerant gas including making fixing arrangement on wall/ ceiling /roof complete all as specified and directed. |
| 195 | Taking down existing unserviceable MCB\"s/MCCB\"s/Distribution boards any capacity complete all as specified and directed. |
| 196 | M & L for Point wiring complete with two runs of 1.5 Sq mm (for Phase and neutral) PVC insulated unsheathed multi stranded, copper conductor FRLSH cable of 1100V grade drawn through and including new non metallic rigid PVC conduit medium grade, ISI marked, 20 mm bore with conduit accessories concealed in wall /floor and fixed on ceiling/roof/truss/columns etc, including provision of fabricated branded pressed steel terminalsunken box of suitable sizes with 1.6mm thickness including back plate and modular white cover frame of any size /type module for housing modular switches, sockets, fan regulators etc. complete flushed to wall and provn of 1.5 Sqmm PVC insulated unsheathed copper conductor cable of green colour to common earth dolly etc. complete all as specified and as directed for one light point controlled by one switch.Note :- (1) The wiring shall be done in proper color coding using red, yellow, blue for phases, black for neutral and green for earth.(2) The cost ofcutting of chases of required width and depth for concealled conduit incl plastering, making good to disturbed surface, painting two coats to match the existing wall colour is deemed to be included in the quoted rate by the contractor. |
| 197 | All as per Sl item No 196 above but for One ceiling fan/exhaust fan point controlled by one switch through regulator |
| 198 | All as per Sl item No 196 above, but for One 5 Ampssocket outlet point on the independent board. |
| 199 | All as per Sl item No 196 above, but for One 5 Ampssocket outlet point on the same board. |
| 200 | All as per Sl item No. 196 here in before, but with wire 2.5 Sqmm for Power point. |
| 201 | S & F lamp holder suitable for B-22 base lamps insulated body surface bakelite with back plate suitable for angle / batten fittings including LED Bulbs 15 Watts suitable for B-22 base complete all as specified and as directed |
| 202 | S&F in replacement LED batten light fitting 2 feet 10W, 220V rated life 25000 burning hours ,efficacy 100 lumen/watt including connecting up with three core flexible copper conductor cable of suitable size from ceiling rose complete all as specified and directed. |
| 203 | S&F LED luminaire 2\"x2\" , 36 watt, 220 V AC recessed type rated life 50000 burning hours ,efficacy 120 lumen/wattwith high efficiency PMMA diffuser soft glare free light complete with driver, holders & LED lamp suitable for roof ceiling including connecting up with driver three core flexible copper conductor cases of suitable size complete all as specified and directed. |
| 204 | S&F Vertical loadline type TPN DB 4 way double door with prov of MCCB as incoming 4P, made out of CRCA sheet housing duly powder coated & confirming to IS specification with busbar rating not less than 160 A complete all as specified and as directed . Note :- MCCB shall be measured and paid separatly. |
| 205 | S&FMCCBs 415V, 36KA, 200amps 4 Pole suitable for V-TPN including removing the existing unserviceable one complete all as specified and directed. |
| 206 | M&L for Submain wiring concealed with 4 runs of single core 10 sqmm PVC insulated FRLS multistranded 1100 volts grade wire, copper conductor drawn through and including non-metalic rigid PVC conduit and conduit accessories of medium grade not not less than 32mm dia including one run of single core 10 sqmm PVC insulatedsheated multistranded 1100 volts grade with copper conductor cable as earth continuty conductor along with the wiring and connected from TPN DB to DB/main board including removing the existing unserviceable submain riwing complete all as specified and directed. |
| 207 | S&F ceiling fans complete with blades, down rods and accessories, 230 V, 1200 mm sweep. Min air delivery 210 CFM with service value 6.00 BEE. Five star rated which can work on electronic regulator with copper winding motor (BLDC Fan) brushless direct current motor, white colour complete all as specified and as directed Note :- The rate quoted deemed to be inclusive of taking down of existing old unserviceable Ceiling fan, transport and deposited atMES Store yard. |
| 208 | M&L for cutting of wall in round shape irrespective of height of building using machine core cutting only and making opening at any height /floor of building for opening hole suitable for mounting of 250 mm dia exhaust fan and making good disturbed surfaces including provision of pvc sleeve suitable for 250 mm dia exhuast fan grouting of nuts and bolts and clearing the debris and making the work area clean all as specified and directed.Note: The rate quoted deemed to be inclusive of hiring of core cutiing machine and T&Prequired at site |
| 209 | S&Ffor laying XLPE insulated, armoured heavy duty electric cable with aluminium conductor, 1100 volts grade, cross-sectional area 25 Sqmm 3.5 core fixed along walls /ceilings complete all as specified and directed. |
| 210 | S&F MCCB enclosure for fixing MCCB of capacity 4 pole,100 Amps, 16KA, 3 phase 415V complete all as specified and directed. |
AI Tender Summary
Tender Timeline
May 27, 2025
11:30 IST
Tender Published
Tender notice published.
Completed
Jun 03, 2025
18:00 IST
Corrigendum-1 Issued
Clarifications on tender conditions and amendments issued.
CompletedJun 03, 2025
17:00 IST
Bid Submission Deadline
Online submission via eProcurement portal.
CompletedJun 11, 2025
Bid Opening Date
Technical bids will be opened and evaluated.
CompletedTender Documents
Download All (ZIP) ↓
Disclaimer
We takes all possible care for accurate & authentic tender information. However users are requested to refer Original source of Tender Notice / Tender Document published by Tender Issuing Agency before taking any call regarding this tender