|
| 1 | Removing and shifting of existing 8500 CFM cabinet type exhaust Fan. Removing of the fan by disconnecting all the ducting connections, canvas connection, electrical cabling & earthing connection. Shifting the fan to the location shown by the Engr. Incharge.Installing the fan on to the fabricated structure. |
| 2 | Supply, installation, balancing and commissioning of factory fabricated GSS sheet metal rectangular/round ducting on the vertical wall from ground floor upto terrace above 7th floor complete with neoprene rubber gaskets, elbows, splitter dampers, vanes, hangers, supports etc. as per approved drawings and specifications of following sheet thickness complete as required.GSS sheet Make- Jindal, Tata |
| 3 | 22 Gauge GI ducting |
| 4 | 20 Gauge GI ducting |
| 5 | Supply, installation, testing and commissioning of GI volume control duct damper complete with neoprene rubber gaskets, nuts, bolts, screws linkages, flanges etcMake- Dynacraft, Cosmos, S M Sheet |
| 6 | Structural steel work : With I beam, M.S.channel, M.S.angle, M.S. plate, fastners etc at all levels including supplying, cutting, fabricating, welding or bolting, errecting and fixing in position including painting with a primary coat of approved steel primer zinc chromate, including cost of materials labour directed by engineer in charge with two coats of enamel paint. |
| 7 | SITC of 1100 V a.c. grade FRLS PVC armoured AL/CU cabling along with appropriate size of saddles,spacers complete with in approved manner.Make- Polycab/RRK/FinolexCable size - 4C x 2.5 Sq. mmRemoving of old cable & earthing and installing the new cable shall be in vendors scope. |
| 8 | SITC of GI earthing of 8 SWG including end connections complete in all respect. |
| 9 | Erection of metal scaffolding for laying of exhaust ducting. |
| 10 | SITC of Split AC\"s 1.5 TRInverter 5 star. Including Std 3 mtr. Copper piping, cable and drain piping. Units should be with 100% Copper condenser and copper evaporator coils. Should work at 52 degree Ambient Temp.Make - Mitsubishi, Daikin, Voltas. |
| 11 | SITC of Split AC\"s 2 TRInverter 5 starIncluding Std 3 mtr.Copper piping, cable and drain piping. Units should be with 100% Copper condenser and copper evaporator coils. Should work at 52 degree Ambient Temp.Make - Mitsubishi, Daikin, Voltas. |
| 12 | SITC of extra copper piping supply and return pipe with insulation. |
| 13 | SITC of flexible 3C x 2.5 sq mm flexible cable.Make- Polycab/RRK/Finolex |
| 14 | Flexible braded PVC pipe for drain piping for split AC |
| 15 | Supply and Installation of 5 mm wall thickness PVC drain piping for Split AC with all fittings and supports, saddle, pressure clamps etc. |
| 16 | Supply installation of MS stand for split AC outdoor unit. (Catwalk) 4ft x 2ft. Fabricated out of 8 mm Thick \"L\" Angle, 5 mm thick 25 mm wide MS bars. Applying one coat of Zinc chromate and two coats of Enamel paint as directed by EIC.Make of steel - Tata, Jindal. |
| 17 | Removing of Old split ACs & window Acs |
| 18 | Cat (B) - Buy Back Items |
| 19 | Buy-Back (ie minus)Amount of of existing, old Split ACs as in where is basis.Buy back Amt to be paid in advance by vendor before taking out the material. 1.5 TR |
| 20 | Buy-Back (ie minus) Amount of existing, old WACs as in where is basis.Buy back Amt to be paid in advance by vendor before taking out the material. 1.5 TR |
